The TIDIEST Tray & Canopy SETUP

[@47Rolling]

Looking awesome. The only suggestion I’ve got with ideas for the canopy fitout is keep it real simple without too many draws and plenty of just open space. Also maybe a bit of 50mm square mesh straight down the middle to seperate the kitchen area from the swags etc. being mesh you can hang stuff off it or tie things off.

[@AussieArvos]

Definitely want to keep it simple and hopefully not too heavy!

[@chrishepple3401]

Very true some of these canopies are great but have no room for bulk storage really gotta be careful how you set them up hey..

[@bennettbuchanan2162]

@@AussieArvosI think just large plastic containers works very good for storage and easily removed and weight next to nothing compared to heavy draws

[@adamsankey8702]

Definitely one of the cleanest patrols around. Awesome job mate you should be super proud of this build 🤙🏼

[@AussieArvos]

Cheers Adam :)

[@crazyjester900]

@@AussieArvoshey crew. Genuine question. Did you guys fuse the extra wire you ran from the alternator to the positive. I want to do the exact same thing to mine. Thank you

[@matty5952]

I love waking up every week and to see if you posted at exactly 9 am LOVE IT

[@AussieArvos]

Cheers mate!! Yep always 9!

[@youtubecarspottersguide1]

2pm in so cailf pst U.S , not sure what time it is in aus

[@terryvaughn677]

I love you guys.... really bring off-road to a normal persons perspective. Looks friggin epic. Can't wait till next episode

[@jaiyoung3319]

You should weld those nuts and washers under the tray so you can just tighten them up from the top. Make life so much easier. Looks neat too👌🏼

[@West4ea]

All looking real good. Nice to see you doing lots yourself without spending a fortune. Personally I’d use some insulation in that canopy will help keep the fridge cooler and lower the risk of anything denting the canopy from inside

[@jimhanfling]

Foilboard from Bunnings works a treat. And you’re 100% right has saved a dent or two😂 www.bunnings.com.au/foilboard-20-x-2400-x-1200mm-ultra-20-insulation_p0125956?

[@stco2426]

I think it looks fantastic and all very neat and uniform. Really like how everything looks coordinated and simple and organised and planned. I hope you're able to continue this with the rest of the accessories to keep it un-fussy and well-proportioned. Well done!!

[@AussieArvos]

Thanks!

[@nickgrech9634]

This is the only 4wd channel that I’m subscribed to. You always outdo yourselves. Well done guys!

[@haydenkenwrick3209]

A few tips for the canopy fit out. Put foilboard insulation on the roof and front and back walls. It would fit nicely between the frame of the canopy. Also use aluminium composite panels if you are wanting to line the internal walls. It’s much th same price as plywood but is lighter and looks super clean. No need to paint or carpet it. Awesome build guys🤙🏼

[@peterrobins3708]

Great job, be proud of it, impressive effort. The holes in the sides where the stands slide in...they might come in handy when camping. Mount a slide in cooking bench or place to mount awning poles...or don't use at all, least there's option there. Great video, thanks for sharing, keep knocking it out of the park - All thumbs up!!!

[@leeblake1437]

Great job on the Nissan I have the same fridge in my Jayco J pod and it works really well. I added a small fan which connects to the fan circuit and only runs when the compressor runs but makes it more efficient and keeps the entire fridge at the same temperature and only cost around $5 and under an hour of work

[@AussieArvos]

Thanks Mate! I've heard of the fan mod on the upright fridges, I'll see how it performs without it but i dare say I'll end up putting one in!

[@leecox9644]

It’s been great watching your build. Fantastic job young fella. Keep up the great work and content.

[@AussieArvos]

Thanks mate!

[@sa_orangejuice8579]

Liam you give me so much inspiration for what I want my Ute to look like , keep making that thing look even better with every mod you do !!!

[@apboxes1]

Looks very tidy, we cannot wait to see what you do with the fit-out!

[@reubenwalker28]

Awesome job mate. Can't say how much I love it. One of my new fav cars. Good on ya!!👍

[@bonezed]

looking good boys! suggestions: glue some cheap foam floor tiles or similar around the fridge, it'll make a huge difference to the performance. add some weather protection to your anderson plug, mine was setup in a similar way but corroded badly after a year or so keep some open space in the canopy. in extreme weather, you can always sleep in there weather protection on the piano hinge, nothing worse than leaky canopy (dust or water)

[@chasinlines4803]

Id suggest rethinking the canopy mounting. If your fully fitting it out but still wanting to take it on and off youll end up either having to leave random spots for those bolts to drop through or having to move everything. If you have the space id flip them so the bolt comes in from underneath and your nut is welded into the canopy floor

[@MrFastFarmer]

Mounting the canopy (if removing it) with bolts is a huge mistake.

[@chasinlines4803]

@@MrFastFarmer I agree. I have seen a few mounts that use the jack off points and tie back into the tray but they never look all that nice

[@MrFastFarmer]

@@chasinlines4803 SO practical - kzbin.info/www/bejne/hXjKmmWph6ppbtEsi=EcudWf8DGCN81-AV&t=364

[@returningtoearthtv8836]

Wow. White Stallion. Digging the reflections - how cool the interior is - intelligent choice on white paint! Looking at the thin walls of that Kings Fridge I’d expect the compressor to be running a fair amount. If you rig the fridge with space around it that you could fill with additional insulation, you might increase the efficiency and life of the compressor in the fridge. During the day you could stuff your sleeping bag or sleeping pad around it to keep the fridge cooler. This would work in concert with your reflective white canopy to keep those beers cold. Just a thought.

[@trentmckay5227]

Nice fellas! I will say the kings fridge is really good, but one thing I did was install a small fan between the freezer and the lid screen, hooked up to the negitive switch of the rear fan. When the compressor kicks in so does the fans. Cools 10× quicker and cost about $30.

[@benravics9534]

Another great episode guy! I found it extremely easy using a socket on a drill to jack up and down the legs. With the slide out pantry move it over 150mm and bolt hot water shower to the other side. That will also give you room to run a water tank

[@hamishkearney542]

looks great so far one of my suggestions is some 12mm foil board insulations, which will go a long way to keeping the canopy cool. It has made my black canopy cooler than inside my ute's cab.

[@keithhaycraft3765]

I have an Adventure Kings upright fridge and it has met all my needs & wishes. As you, much lighter than a chest fridge and more accessible.

[@pieteri.duplessis]

A very neat and tidy job indeed. It looks like a new vehicle. Someone suggested you weld the securing nuts to the underside of your canopy; I would not, consider using wing nuts instead - can be held in place viet your finger and you do not get to spoil the paintwork with welding. Happy travels.

[@christopherlillia7831]

Can use the jack off slots to support a bench or table. Works a treat. Just slides in and off ya go.

[@ramblinonandon]

Looks great 👍I'm certain you could sort out the mounting bolts to go into captive nuts. Even something as simple as weld the nut to a plate and Sikaflex them underneath, no welding==no painting..LOL 😊

[@claudyboulaye286]

Can confirm I have also done this as it does get annoying going underneath each time you want to take the canopy off haha

[@richardatkin8526]

Looks really nice, well done! Don't run a canopy myself as i have a wagon but suggest keeping it relatively open/ empty on the passenger side so you can adapt to needs of each trip/ daily use. Less weight and more space available with canopy on means you won't have to take it off as often. 🤷🏽‍♂️

[@teigesler]

This is one of my favourite builds I’ve seen. Looks so good.

[@toddmillar4041]

I've got no suggestions of where to put stuff but one suggestion I do have is when you drill a hole in either the canopy or the tray paint the hole with some rust proofing paint. Even if you have a spray can and spray the tip of a cotton bud. Also, look at nylon nuts and denso tape for your hold down bolts

[@Tourn4x4]

Love the way the troll is coming along mate, Canopy Colour match is pretty on point for being a fluke, definitely looks good on film 👌

[@christophergear7247]

A thought for under the tray. A water tank with a surflo water pump. I’ve seen several canopies and they recommend the water tank and pump. Something to consider. Love the channel Chris from WA.

[@keilfestin4606]

Awesome to see you trying things out and not just out a crap tone of hear at once love kings

[@rossco3775tv]

Looks awesome Liam, need to do a side by side comparison from before and after build, insane transformation she's an absolute beauty now👍👍

[@michaelreis5398]

Hey Liam , love it and I'm only halfway through 😅 what about a lockable Cary rack on the back for the lifts or just in the canopy , a 270 degree awning and rooftop tent and you'll have a camp setup that you can remove and still be able to go wheelin 😎

[@TJANDMAC]

Turned out great !

[@AussieArvos]

Cheers guys !

[@Lsjeffery97]

Matches so well on the tray man! Would be alright to incorporate a travel buddy hanging from roof of inside of your canopy so doesn’t take up floor space and travel buddy’s r so good to cook with! Especially while driving and now you both got lithium no inssues! Buy a step up convert and you’re sweet! Go induction if you can afford it power wise and on drawer in the middle of fridge and pantry with a slide out bench. And couple drawers on drivers side

[@HammerRocks]

Looking good Liam. Looking forward to seeing how you set up your canopy. Plus give an update on how our fridge goes after a few months. I too am looking at the Kings upright fridge next year when I redo my rear setup of my 80 Series. 👍

[@AussieArvos]

Definitely will do Hammerrocks! Cheers

[@Mali-kuValdes]

Can you swap the hinges on that fridge

[@HammerRocks]

@@Mali-kuValdes Are you referring to swapping sides where it hinges? If so, yes you can.

[@MntlMajorkozmo]

Nice little canopy. FIrst thing i saw was a strip of LEDs along the top of the door jam on the inside. Pointed up itll reflect off the roof and bounce and you wont actually see them. Definitely look into cargo nets or MOLLE style nets. Bungie cord in the fridge so stuff doesnt move too much has been a big thing going around the kings forums. Making me want to ignore the wife and get a ute now my wagon is dead.

[@bryceyoung3604]

Looks Awsome, brilliant channel. You all should be very proud of all you have done and created. Look forward to you posts every week. Certainly inspires me and other to have a go myself. Keep up the great work

[@AussieArvos]

Thanks Bryce! Really means alot man! Thanks !

[@MicahBell_1860]

I would consider some insulation in the canopy, Liam. Nobody does that, but on a stinking hot day it might keep the inside about 20° cooler? Also it would hide the framework/cavities between the framework. Anyway, even though I'm a Landcruiser guy, it looks good. (Please don't let anyone know I said that a Patrol looked good!)

[@SeriousAutosAustralia]

Mean looking rig mate, you've done a great job...

[@jonnewton5929]

The ute has turned out looking sweet as mate. And usable. Great to watch it take shape

[@AussieArvos]

Thanks Jon!!

[@k2svpete]

Nice work. I'd insulate the roof, as a minimum. Depending on the size of the box sections of the frame, go down to Bunnings and get a Foilboard insulation panel that's as close to filling the void as possible. Then get an aluminium composite sheet to cover it all up. Lightweight and it'll certainly make a difference. Suggest fitting the aluminium load runner channels like the Grenadier has on the doors to secure plastic boxes or anything else, keeping the back simple, flexible and lightweight

[@andrewt3952]

I’ve been waiting to see what setup u ended up going with. I’ve got the same kings fridge in my house. I live in the tropics, and my house is warm, so fridge works hard. As per reviews, the freezer ices up every 3 weeks, and in my situation, it draws 3.1 amps consistently. That said, it’s a great fridge for the money. Been using it for 6 months solid now. For the money, still worth it.

[@JAGTHEJOKER]

Rig is coming along mint!!! Can't wait to see the final fit out!

[@Mavererick]

Loving the build so far. I reckon have a look at the Clear View Slide out Kitchen. Looks kinda specy

[@Jeeps.offroad]

Another great episode from the Aussie Arvo's team 🤙

[@herve160181]

Looks awesome. I would've mounted the spare to the side just to balance the fridge but it looks awesome. Upright fridge is the go with your setup for sure.

[@Master-Blaster-4x4]

you are correct about the weight distribution but the looks of the tire centered on the back is growing on me

[@rhysbertrand8903]

Fridge etc should be left hand side anyway. When you park on the side of a track or road etc, driver side is road side and more dangerous to be accessing vehicle from. My work ute has all my frequently used tools on the left, curb side, for safer access.

[@returningtoearthtv8836]

@@rhysbertrand8903 intelligent planning. Simple. Safety. Gracias.

[@gregdogg10]

Get some spring loaded bars for the fridge to stop items falling out when u open the door

[@__beer__]

Now thats a clean looking rig! And practical too!

[@can5projects563]

That looks great awesome job fellas

[@AussieArvos]

Cheers mate!!

[@damo.77]

Looks neat as mate. Upright fridges in canopies are the best thing ever, you'll never look back. One thing id suggest even though your canopy is white is id insulate the entire thing with foil board, makes a big difference in summer.

[@AussieArvos]

Thanks mate! Think i will do the ceiling and doors but not the front and rear wall as they dont get the direct sunlight

[@jakerenner01]

Looks good mate! Just need some tray sides to make it practical for jerry cans and gas bottles on the back

[@chris_muller]

Great job guys! Looks awesome! Nothing is as permanent as a temporary solution! 😂

[@AussieArvos]

I promise it won't stay like this 🤣

[@stephencawrse9940]

Looks awesome a tuff truck you have done an excellent job the wheels look fantastic all it needs now is a Built not Bought sticker cheers legends and have a safe Xmas and new year 😊😊

[@matthardey6722]

Awesome work, it’s all looking amazing! Are you planning on insulating the canopy? A few sheets of foilboard could be good.

[@mattbehan218]

Great job mate! Looks fantastic.

[@007oli]

Had the kings 85l for a while now, wouldnt go back to a chest style, so much easier to use. It does draw a tad more but i have lithium and solar so not fussed. Before when the kings was around 800ish i did consider the bushmans etc but saw them go down to 500 with the secop comp and it was an easy choice.

[@Mouldyturnip75]

Yep, and the small fan hack makes them even better.

[@Madmick82]

Rig looks mint mate.

[@wadejensen3301]

Mate, nothing wrong with giving the Kings upright a run to see how it goes! You never know, it might just give you years of good service!

[@juniorfuller6829]

Looks sick mate keep up the good work. This is "build" is sort of what I'd like to do with my car in a few years.

[@kenanschoon8585]

Picking up one of the Apb boxes in the coming weeks so will definitely be keen to get some Inspo from you Liam, you guys always seem to put your super unique and ingenious spin on things so definitely keen to see it, definitely a good call to just use the canopy in its blank format to just plot out what works, there’s a face book group called “4x4 canopies and trays Australia” definitely worth giving that a look man, some super neat and relatively budget friendly setups in there 🤙🏽

[@AussieArvos]

oh thanks Kenan! cheers i'll check it out! thanks!

[@beast6able]

Nailed it!

[@pewpew2400]

Not sure if it has been said but I would run the exterior anderson plug upside down so it doesn't fill up with crap - thanks again for the vid boys!

[@louiskudlak2241]

Looks very smick, well done, coming along nicely ❤

[@geoffmcgovern3707]

Looks awesome dude 👍

[@Motorep146]

What a clean build!

[@davechalmers7606]

Looks awesome guys - great looking Rig. Did you end up bolting the fridge down? must have missed that!

[@LoganKingMedia]

Looks so good!!

[@fatmanoverlanding]

Good one boys. I always enjoy watching your DIY projects. And your projects, you don't need to re-mortgage your house nor sell internal organs to afford them. 😁 It's one of the tidiest TD42s in Australia, I reckon. But it's missing one thing right now, an Aussie Arvo sticker. 😁

[@AussieArvos]

Thanks Mate! now that you mention it i can't believe i forgot to throw a sticker on it 😅

[@The_ElunduExpeditionProject]

Its looking amazing mate, love it! 💯

[@jessetink3753]

Looks great leim. Clearly you’re not going to put a false floor in it? Apart from that I’ve been running a canopy on my dual cab now for about 3/4 years and I’ve got a 40l Engle and a drop down slide and a set of draws and it weighs a fair bit so keeping down on the weight is a pretty big thing. So I think you’ve made the right decision with the upright fridge and the aluminium pantry. And stuff the haters with your kings stuff mate we can’t all afford a bushman’s fridge!! 👍🏽

[@buster_1972]

Look's great. I bought a 95lt king's fridge. Save over 1000 dollars on other brands and got 5 year warranty.

[@patryanlrd666]

Hope you’re changing the side the fridge door opens. Loving this build mat

[@rhysbertrand8903]

Wouldn't have to if it was on the curb side like it should be... hopefully he realises and changes it as it's much better

[@andrewpoole9035]

Absolutely smick mate 🤌

[@noahjbarr]

Has come together great👍

[@kylemclean4064]

Looks so good fellas! 👌

[@adamheazlett1179]

Put your spare wheel on the roof of the Patrol you can through a swag on as well .Giving you more working space on the tray

[@curtturtle]

Looks great. Don't listen to the haters, kings fridges are mint. My drawer fridge is the best I have ever owned.

[@spijker_]

Put a black diesel jerrycan on the back next to the spare! Cool build man :)

[@ESolutions-h7h]

Awesome work 👏🏼

[@stephenlatimer1428]

once again knocked it out of the ball park again lads. not using the standard industry suppliers n show casing the smaller suppliers is becoming a benchmark for u guys. well done for that. will be surprised if u dont like the upright fridge. i run 2 bushmans n wont go bak. not sure bout the quality of the kings upright fridge but its a cheap way to figure that out for ur self. 3 nice rigs from 3 nice blokes. bring on the content.

[@pantherdean84]

Just to give you a heads up with the fridge, the latch is pretty terrible when you are driving around. Heavy items like drinks on the lower shelves will slide around and can hit the lower part of the door and will pop the door open. I'm going to add an over centre latch to mine.

[@McGarnn]

Looks good! Am I the only one who thinks that it needs a couple of UN stickers on each side and a light blue beret?😂 All jokes a side I enjoy watching the channel and look forward to seeing what is to come in the future. Good work!

[@AussieArvos]

Hahaha i know right, she's pretty white all round! Cheers mate!

[@JackosBT]

The big rigs looking amazing, are ya gana chuck vents in the canopy ?

[@leviturnbull2609]

You should glue a piece of white material to the inside of the APB cut out on the pantry to make the logo pop out more

[@frmtrkr]

good job. nice canopy.i am in the middle of trying different set-ups in canopy as we speak. not as flash as yours ,lol but it works. milk crates fit perfect in mine as drawers which also makes them removable .fridge won't be inside as its kinda large.i changed canopies for the roof top as other made overall height 8 ft .which was way to high.will send some pics when I get it all figured out.again nice job and looks great on your ute. 😃PS, I also carry shit load of tools, out of habit ,usually if I dont got its when I need it.

[@Sam.R555]

I'm running the kings 85L in the back of my ranger with the bluetooth temp probe from them too, it got to 55c in the cab last week and the fridge was sitting happy at 2.8c (set at 2c). People love shitting on kings gear but at 1/3 the price of a bushmans you can't go wrong.

[@stevesmith3556]

Looking good!❤

[@jasparfuss9412]

Great bit of kit you’ve got there, how does the fridge go after having it for a few weeks now? Does it always draw 2.9 amps or is that just when it’s cooling down?

[@scottyoung2287]

Sick work! Any plan for an awning and how you’ll mount it without fouling the gull wings?

[@berlina6]

It looks amazing!!! So tidy!

[@simonhamilton2158]

Good job. Love it.

[@Josh_outdoors-h7g]

Looks so good👌

[@R.Sole88109]

Good looking machine.👍🏻 Is the box missing rain rails where the canopy door hinges or is it a water resistant hinge?. Either way, you 2 legends should know by now how often temporary becomes permanent😜😆

[@bruceottway8369]

Mate looks smick, I reckon after seeing your number plate you should throw a bit of yellow on the roof and rename your rig cockey "CKE" just like you should feel driving this smart rig

[@LemonRiverOutdoors]

Looks great!

[@MiniLuv-1984]

It looks absolutely perfect. colour, shape and size. I wonder if some aerodynamics on the front between the canopy and the cab might help reduce fuel consumption? (Can you tell I've been watching aerodynamics videos lately?)

[@matthewoutram1228]

Mate looks fantastic

[@AussieArvos]

Cheers Mathew! Yeah I'm really happy with how it turned out!

[@jescowan26]

some custom led light up logos laser engraved into perspex or frosted acrylic would pop inside the canopy

[@Vanisl4runner1]

Your medical box power unit…. Honestly man, if it works, it works. Why redo it? One of the things I love about this show is the no nonsense reusing of what you have and not being too expensive. Hope it stays this way.