The Top Reasons I Regret Getting A Diamondback Cover!

Рет қаралды 14,856

Күн бұрын

Пікірлер: 58

@LoveMyKleeKai 6 ай бұрын

Something tells me you didn't have a person sit on the panels when you adjusted the locks as the instructions said to do...there's your waterproofing

@bigdawg111 6 ай бұрын

Id regret buying that jeep...unless your wife wanted it.

@JackMonkeyOverland 6 ай бұрын

Thanks I hope you don't regret trolling the comments section here! Have a great day!

@Army4Runner 5 ай бұрын

Spoken like a true Toyota soy boy.

@jasunto 2 күн бұрын

I think I am going to either get the Renegade bed cover or an RSI Smart cap.

@JackMonkeyOverland 2 күн бұрын

Both are very good options! Honestly the smart cap is what I would choose.

@AndrewGallagher2000SC 3 ай бұрын

I placed 100lbs of weight let it sit over night then adjusted the locking bar front and rear in the morning and have seen traces of moisture only a few times in two years. I live in the rain saturated state of Washington and have been happy with my hd Diamondback cover it is very secure. It isn't perfect as I agree with the access issues in the front section.....

@crimson1546 6 ай бұрын

Did you add the shims under the bed rail covers? Thats helped substantially with the leaks for me.

@daniely8824 4 ай бұрын

This guy might’ve installed his cover like Jeep builds their vehicles.

@JackMonkeyOverland 4 ай бұрын

And like you type your comments! Thanks for stopping by!

@fritty9927 3 ай бұрын

Nice vid. I have one on my Tacoma. No leaks on mine and I have zero plans for roof top tent. I did use silicone to seal small gaps located near bottom of tailgate.

@JackMonkeyOverland 3 ай бұрын

Yeah I think I maybe tightened it down a bit much. I don't know, thanks for watching!

@gonefishingapodaca 7 ай бұрын

These covers are super hyped on KZbin and other social media, and perhaps they work for those applications. I went with the switchback from DB for better access to the bed, and quicker removal. My truck is lifted and I'm not a tall dude, so the front access of the HD was a no go for the reasons you just described. My cover comes next week, and I'm already thinking I should have gotten a topper instead, but that comes with its own set of considerations. It looks like the seals on your cover were not compressed enough during install and that's why it dips in the middle. Good luck on your next cover!

@unounv 5 ай бұрын

Bro you need to put weight on the top before adjusting the locking bar! Have someone sit on top or something. Sits level if you do it right.

@JackMonkeyOverland 5 ай бұрын

Ok thanks!

@is6566 5 ай бұрын

This is exactly the reason why the two opening parts are not level , my guess is that this is also the reason why it leaks. The gaskets around the openings are not fully compressed against the bed. It’s an installation error but it’s easy to fix as the previous poster mentioned. Just get it pushed down by someone with weight sitting on it and adjust the locking bar to tightly pull the lid down when you close the lid. I have a DiamondBack cover and it’s level and 100% rainproof. I used four 50-pound bags of salt to keep it down when tightening. Also if the lock bar at first time is not tight when you installed it then the gaskets themselves might not have been properly adhered to the bed when you glued the rubber band around the bed. I still think just adjusting the lock bar will solve most of your issues.

@Geckizard 7 ай бұрын

Thanks for sharing your honest perspective on this thing. It sounds like it might be right for some while not right for others. All great points.

@JackMonkeyOverland 7 ай бұрын

Glad it was helpful!

@tommybarrios3307 7 ай бұрын

I see your point on how the front and rear lids taper towards the center. A perfect rain catch. Easy to see why it leaks. Good video very informative. Nice looking Gladiator.

@JackMonkeyOverland 7 ай бұрын

Thanks 👍

@wildwoodbrands 2 ай бұрын

There's a gutter that sends that rain right off the truck. The seals are better quality than the ones on my Tacomas door. My HD has never leaked. The cover in the video wasn't installed properly

@jasonwilson7998 7 ай бұрын

Cool episode! It would be great to see the install episode of the new setup!

@JackMonkeyOverland 7 ай бұрын

I plan on it, I just haven't had time to unbox it and install it yet!

@jasonharris3557 6 ай бұрын

The other major difference between the HD version and the other version is the thickness in material they use as well as the extra aluminum studs.

@DaveGraw 4 ай бұрын

you could attach straps to the totes so you could just pull them out when you need them instead of having to crawl under the cover. another idea. in my work truck i cut a sheet of plywood to fit between the wheel wells and cut it back as far as i could reach, put a handle on it then it just slides out.

@JackMonkeyOverland 4 ай бұрын

That is a great idea! Thanks for the input!

@Calijack 5 ай бұрын

The manufacturer never stated that it’s waterproof.

@jessr7361 6 ай бұрын

Interesting perspective on the Diamondback Cover from a month ago. Are you going to make more videos, or was it a one off? That thing looks pretty strong though.

@JackMonkeyOverland 6 ай бұрын

It it s a quality bed cover, no doubt. I have more videos coming. I just installed the diamondbacks replacement, so stay tuned for that video. It should be up next weekend.

@sugarmtn 5 ай бұрын

You thought you could keep the cover flat with a tent on it? I think you need an airstream bro...

@g5todd 3 ай бұрын

sounds like you did not really do your research...how would you think you would be able to open it with a RTT installed

@JackMonkeyOverland 3 ай бұрын

I love this comment.... I knew I wouldn't be able to open it... duh! I said I didn't think it would be as big of a deal to climb up into the back and dig stuff out but it was so there is the reason I don't like it!

@seanforeman1457 5 ай бұрын

After you've resolved the leveling issue, thus most of the leakage issue, then lose those yellow lids on your plastic bins for the best access. I'm getting my 2024 GMC Canyon soon followed by my own Diamondback cover and I believe I'll be fabricating my own storage bin (similar to the one they sell). Outside of that a number of your issues seem to stem from a simple lack of trouble shooting up front. Best of luck with your projects.

@Calijack 5 ай бұрын

They have an awesome return policy. Not sure if you are still within the return period

@usmcmsgt5487 4 ай бұрын

5:26 welcome.

@robertthomas1286 Ай бұрын

You don’t have it installed to be flat or more waterproof.

@mattbrew11 7 ай бұрын

I ended up buying power the power cover from EGRUSA and I could not be happier with my decision

@chrisgill7824 7 ай бұрын

I could never use a bed cover like that. I use my bed to haul things, I had a Tiller in it last week. A couple weeks ago I had 30 bags of mulch in it. I have a Bakflip trifold. it is light weight, water tight, still secure, but easily flipped up to allow the entire bed to be used when needed. No tools required.

@JackMonkeyOverland 7 ай бұрын

Sounds like it works great for what you use it for!

@lisawiese3240 4 ай бұрын

Diamondback makes a drawer insert for the cab end. And, yes, with a tent on the diamondback you cant open it. The nature of a "rooftop" tent. Not the covers fault. Sounds like you needed a different set up.

@JackMonkeyOverland 4 ай бұрын

Yes exactly! I didn't think it would be that bad when I made the purchase, and it turns out it was not what I thought!

@Monty1776 4 ай бұрын

Get the decked cargo glide system for your bed.

@JackMonkeyOverland 4 ай бұрын

That or I was thinking of making my own!

@HarrisonBergeronIsHere Ай бұрын

Your complaints are discoverable features, not defects.

@JackMonkeyOverland Ай бұрын

Absolutely not defects, you are correct!

@sarge502jeep 2 ай бұрын

Bro most all of your "minor inconveniences" you speak of could have easily been considered before buying it. I mean base the function off your set up prior. I get it isn't for everyone. But also I could bet anything your install game was off. The leveling concern and waterproofing concern could most likely be rectified with proper install and adding weight to the top prior to adjusting your locking system. My Diamondback is the best addition to my truck.

@JackMonkeyOverland 2 ай бұрын

Appreciate that feedback, I had it installed at a jeep shop since I was out of the country when I purchased it! It's an awesome bed cover, just not the one I needed for my specific needs!

@troyelliott9465 5 ай бұрын

Watched this review... not sure.. think the purpose is to get a financial credit or some kind of refund from the manufacture. I have a Model 270. I am very pleased with my purchase. Superior quality, compared to the competition. My question to the reviewer, can he find a better unit . Sincerely doubt it His complaints are nothing short of nit picking. I would not give this whinner any time, looks like a weasel move, in my opinion.

@JackMonkeyOverland 5 ай бұрын

Thanks for watching!

@bradbailey3500 5 ай бұрын

They dont claim to be waterproof.

@showapower3991 10 күн бұрын

Why t f u spend 3k if you don’t like the look😂

@JackMonkeyOverland 10 күн бұрын

Well you see I liked the look when i saw it on youtube and on the website, however once its one the jeep i wasnt so sure about it. Perhaps this is something you wouldn't understand, but thanks for watching.

@Calijack 5 ай бұрын

I think the vehicle was the wrong one for your intentions.