The Ultimate All AMD Gaming PC Build | SSUPD Xhuttle | Ryzen 9800X3D | Radeon 7900 XTX

The Ultimate All AMD Gaming PC Build | SSUPD Xhuttle | Ryzen 9800X3D | Radeon 7900 XTX | X870

Рет қаралды 27,426

PC SNAP

Күн бұрын

Пікірлер: 55

@lucifermorningstar8759 2 ай бұрын

Shouldn't the AIO tubes be on top?

@PC_SNAP 2 ай бұрын

It is possible to install the tubes in an upward direction, but it's difficult to maintain the aesthetics. Therefore, I decided to position the tubes at the bottom, although I don't like this setup. I think there's a reason why most KZbinrs build this case in a similar way.

@LakerTriangle 2 ай бұрын

It's a sealed pump so it doesn't matter.

@mrfumetsu 2 ай бұрын

As long as the radiator is higher than the pump it's a non issue.

@ALONfiles 2 ай бұрын

Hahahaha

@AshenAlpha 2 ай бұрын

After a lot of research, the general rule is that -so long as about 20% of the radiator is above the highest point of the pump, it'll run smoothly and at optimal conditions-. Tubes being at the bottom is actually ideal compared to them being at the top in the same vertical orientation. Them being at the top will cause burbling/ water noise, even with the pump below that. The opposite side of the tubes on most radiators has a dedicated reservoir where they design it with that it mind, for the air to get to that point and be trapped.

@pcelegance Ай бұрын

As always you are creating not a simple PC but a piece of art! Congrats with a 10K milestone!

@PC_SNAP Ай бұрын

Oh, thanks man!

@theSLVRFOX 2 ай бұрын

Guys, the AIO orientation here is perfectly fine. It's in the second best position it can be, with a top mounted radiator being the best position. Here, any air in the system gets trapped at the top of the rad... you will lose some heat dissipation efficiency, but this won't affect the pump because the liquid doesn't have to content with the trapped air. Reversing the tube orientation and putting them at the top of the rad will create the potential of trapping air where the tube enters the rad. It won't kill the pump, but it does have to work a little bit harder as a result of having to push the liquid through a smaller opening created as a result of the trapped air, and thus potentially lower the lifespan of your pump. Edit: And if you don't believe me, both Gamer's Nexus and JayzTwoCents have spoken about this very topic at length.

@PC_SNAP 2 ай бұрын

Thank you so much for the information and summary.👍👍

@jacobsmith2466 2 ай бұрын

The build looks really clean. Well done bro!

@PC_SNAP 2 ай бұрын

Oh, thank you so much! I really appreciate your support👍

@reyarthur2792 2 ай бұрын

bro, I had to like, you did what I was going to do if I got this case. nice

@PC_SNAP 2 ай бұрын

Cheers mate!!

@anthonyb59 2 ай бұрын

I like the comment of the GPU test: tested in horizontal position :) because in the final position, graphic cards don't like the vertical mode and it decrease a lot the cooling possibilities. I needed to use a waterblock to not be throttling

@KingAbyssGamingOfficial 2 ай бұрын

Nice build 👍

@D4RKAG3Z 2 ай бұрын

nice one. amd for the win

@jssw3404 16 сағат бұрын

There's something wrong with the negative airflow system. The idle temp of cpu is already 42C which means hot air is somehow trapped within the case. The pc won't last long if heavy duties are loaded frequently.

@james-uz4xc 2 ай бұрын

I'm so jealous of the 9800x3d. The clean build is top-notch!

@PC_SNAP 2 ай бұрын

Oh, thank you so much!

@wisnudJat 2 ай бұрын

Weird orientation but still gorgeous.

@deputydong18 2 ай бұрын

I think if you get the thermalright am5 plate for the cpu, you'll probably get some better cooler spread on that cpu. Seems alittle high than what it's suppose to be on those loads.

@PC_SNAP 2 ай бұрын

Thanks man! 07:05 If the 9800X3D stays under 80°C in Cinebench R23 without undervolting, it's an excellent result.

@SungchulAn 2 ай бұрын

영상 분위기 좋습다 리안리 팬하고 라데온 레퍼글카 led하고 잘어울리네요 ㅎㅎ 잘봤어여❤

@PC_SNAP 2 ай бұрын

의도된 것은 아니지만 LED 느낌이 비슷한 것 같네요! 감사합니다 성철님!

@yurugo3509 2 ай бұрын

Bit weird to have the AIO in that configuration, doesnt gravity effect the water being pumped

@Warhorse469 2 ай бұрын

It does this AIO that is installed the wrong way

@AlphaMachina 12 күн бұрын

I want to see a build in this in the horizontal position. No one doing that.

@timyfin 9 күн бұрын

I like this case. Idea how set GPU there is really something and needed already long time case on left side of table. SSUPD just cant help me to find where to buy this case. Now i got issue to plan this case with 5090, because plan to put quality PSU there and those need 180 cm space. This got PSU max 170 cm. Hope they upgrade this model. Also would be nice if class corner would be rounded.

@LeshaDTM 2 ай бұрын

What the sense to suck hot air from radiator, inside the case?

@PC_SNAP 2 ай бұрын

Intake is more effective than exhaust for CPU cooling. While it may increase the internal temperature of the PC case, this can be compensated by using bottom-mounted fans.

@drakenoir8488 Ай бұрын

Been reading that GPUs in that orientation tends to run about 20° C hotter than typical orientation. Any truth to that?

@PC_SNAP Ай бұрын

Not all GPUs, but it’s true for vapor chamber types. Regular GPUs are fine.

@Greatsword77 2 ай бұрын

RAZEN 7 9800x3D (AMD AM5) CPU에 CPU 쿨러와 써멀구리스 추천해봅니다 (개인적인 선호부품 기재) (컴퓨터 하드웨어 선택 이전에 모든 부품들 호환성확인 및 실제 작동시 문제가 있는지 없는지 등등 충분한 공부와 자료수집은 무척 중요한 절차) 01 CPU (1개 선택하는 부품) RAZEN 7 9800X3D (AMD AM5) 02 써멀구리스 (1개 선택하는 부품) ARCTIC MX4 추천 03 CPU 쿨러 (1개 선택하는부품) (개인적으로 선호해서 추천기재한 3종류 제품중 1개선택추천) (공냉(AIR COOLER) CPU Cooler중에서 대장급제품들(2024년도 기준)이므로 수냉쿨러(Water Cooler)와는 다르게 누수우려 없으면서 9800X3D에 사용해도 쿨링성능이 충분한것이 장점) 3RSYS RC1900 CPU쿨러(AMD AM5 소켓지원 모델) / 또는 PCCOOLER CPS RZ620 화이트 CPU쿨러 (AMD AM5 소켓지원 모델) / 또는 PCCOOLER CPS RZ 820 (AMD AM5 소켓지원 모델) 3종류중에 1개 선택 추천 (부품스펙호환성 기재이외에도 실제조립시 다른부품들(램방열판,메인보드,그래픽카드,케이스 등등) 과의 공간간섭이 있는지 없는지 구매전에 확인필수) (무척 중요한 확인 절차) 컴퓨터 TIP 사용하다 문제생긴경우 데스크탑 저장장치에있는 자료 백업이후 운영체제 재설치로 대부분해결 그래도 안되는 경우 고장난부품만 제조사AS보내거나 호환되는 다른 제품으로 교체해결 일정 기간마다 써멀구리스 관리 And Bitcoin Unit "MBTC" 1000000 "kBTC" 1000 "hBTC" 100 "deBTC" 10 "BTC" 1 "dBTC" 0.1 "cBTC" 0.01 "mBTC" 0.001 "uBTC" 0.000001 "satoshi" 0.00000001