The Ultimate Guide To Fire Starters and Making Fires🔥

Check out the Plasma Lighter here: amzn.to/3kjlE5j
In this video, Gordon examines all of the major fire-starting methods and categorizes them for survival and camping use.
Prepared 4x survival torch: amzn.to/3Whc0x3
Fire Piston: amzn.to/3GKH7vc
As an Amazon Associate I earn from qualifying purchases.
Survival gear. Mental survival. Self reliance. Bushcraft how-to. Situational Awareness. Wilderness survival. How to cope with hardship. Mental toughness and mental resiliency. Outdoor skills. Hiking and backpacking. Vehicle preparedness. Mobility prepping.

[@IngeniousOutdoors]

Few things here. 1. The flint in a lighter doesn't "turn to mush" it's a tiny ferro rod. You just need to get it dry by blowing on it through the roller to get the water out between the rod and the wheel, and itll work again. 2. To keep the fluid in a zippo from evaporating, cut a 1 inch bit off an inner tube (to make a sort of fat rubberband. A.k.a. a ranger band) and slip it over the zippo to keep the fluid in. 3. The cotton and coals method is actually supposed to be cotton and ash, and it's called. Rudiger Roll/fire roll and was pioneered on KZbin by a channel called BoggyCreekBeast. And the list of fibers and fillers is extensive. Another amazing channel to check out concerning the RR/FR is the David West channel. You won't be disappointed. 4. The chocolate and can method doesn't really work that well and you're better off carrying an emergency blob of aluminum polishing compound to buff it to a high shine. 5. Still an amazing video and very well done. Good job ^_^

[@arctodussimus6198]

Excellent video. Very informative. I follow the PACE method for all my camping/survival bags and kits. P - primary A - alternate C - contingency E - extra My primary fire method is flint and steel. I’ve been doing it since I was 8 years old (1967). My alternate method is a ferro rod. Usually a 1/2”X6” rod, but some of my kits have a Strike Force or a BlastMatch (two of my favorites). My Contingency method will be a magnifying lens. My extra method is matches or a lighter. In over 55 years of going to the wilderness, in all seasons and all weather conditions, I’ve never used a lighter to start a fire. I always bring tinder. Either cotton with Vaseline, jute twine, char cloth, magnesium with duct tape, etc. And I like the commercial tinders too. Wet fire is good but it has a shelf life. I like Fire Plugs and the Baddest Bee Fire Fuses.

[@edvinaberg3381]

Thanks!

[@dutchvanderbilt9969]

The key to any survival kit at least in my opinion is to have lots of redundancy when it comes to fire starting. That way you won't have to hopefully resort to primitive fire starting the methods. If I'm in the woods I'll either just use a lighter, matches, or if it's windy storm-proof matches. I actually EDC some storm matches and I mainly use them to help me burn trash, brush, etc. Real simple, effective and just fun to use.

[@grimgranite]

Love those storm proof matches! Thanks for watching

[@konnorwerth4906]

I carry in my survival bag for fire a big Ferro rod, bic lighter, large uco storm proof matches and tinder

[@TheGuidedSharpeningGuide]

Great video. Im a Ferro rod and fatwood guy myself but ive also got a soft flame and torch flame butane inserts for my Zippos. They are way better than the zippo fuel inserts.

[@jinxjones5497]

Okay, any self confessed survivalist/prepper/woodsman knows a plethora of fire starting methods. Armadillo jerky had me rolling. Youre a funny guy Gordon! 😂😁 Tortoise Gear deserved a mention in the ferro rod section. Lifeboat matches, ive made similar from splints of fatwood and used the phosphorus from standard matches broken down in water to coat the tip half. It dries out, it strikes. A quick mention for those rechargeable batteries. I would happily break up a vape pen or whatever for the steel wool or even just thin copper wire trick from whatever you salvaged the battery from. You didn't mention "spunks" which are homemade "matches" made by dipping a wooden splint in melted sulphur. It was common many years ago but requires an ignition source like flint and steel on char materials. Also black powder or gun powder from gun shells. I have the makings of black powder in my kitchen sink cupboard. I also have lasers that i usually use to prank that lightweight buddy that smokes a little pot and falls asleep. It will ignite a match from the other side of the room so burning your pal's leg to wake him up or ignite tinder is pretty easy. Oh special shout out to a little used tinder that nobody mentions is hair. It has natural oils and smells terrible but if you have nothing else. Ice is so hard but look up how to make clear ice on bar/alcohol channels to give you a fighting chance with that. Also with that method you can use a clear bottle with water in it as a magnifying glass. Great video on a favourite subject matter for me anyway

[@grimgranite]

Great stuff, man! Thanks for watching and for the comment. I appreciate the info, I can always count on you for info rich comments! 🤓

[@c.e.benson3263]

LOL....my mom...( granted she's 80 yrs old) told me she was going to start collecting her cats hair to start fires.😂 Good grief! But maybe it would be a good bear or Catamount repellent 🤔 Or bear and Catamount attractant 😮 Not sure yet....will have to get back to you on that😳

[@charleshayes2528]

@@grimgranite Following on from Mr Jinx Jones, there is a kind of pomegranate drink called POM. Despite the Aussie-sounding name it is from the USA (confusingly, a UK bottle identifies the company as Belgian?) and the American version has a bottle built like two spheres, one on top of the other, this means you can fill it with water and use one or the other as your lens! As the flattening occurs at the top and bottom of each sphere only, it has no detrimental effect on the lensing ability of the shape. This is another technique I haven't tried; the drink isn't widely available here in the UK, it isn't cheap and they have chosen a design which looks less spherical, but that may be because of package design. If I manage to get a bottle and a sunny day (rare as hen's teeth here in my bit of the UK) I will try it and let you know.

[@lukecrue1]

Been here from the beginning and so happy to see your channel take off! I knew it would because not only do you make quality videos, you're honest, practical, and hilarious. Thanks for another great video.

[@grimgranite]

Lucas, I appreciate you! Thanks for being an early adopter of this craziness!

[@HikerBikerMoter]

Ferro rod, manganese, flint Mini torch, Lighter, matches, magnifying glass Steel wool/batt., striker/coal ---love it 👍

[@mikerilling6515]

Put the end of your ferro rod on your Tinder pile and hold it at an angle. Then you can strike down with your striker. You won’t dislodge the tender pile, and your sparks will go perfectly onto the Tinder pile. The problem with the plasma lighters is not necessarily whether or not they are waterproof. If you keep them in a Ziploc bag in your top left pocket your bic, lighter, and your small ferro rod that won’t be an issue. The problem is battery life I’ve never had one that had a decent battery life and I’ve had more than a dozen over the last few years. Your bic lighter should be in your fire kit, which is in a Ziploc bag or some other clear waterproof bag in your top left pocket so it’ll stay warm with your body heat. It’ll stay upright so it doesn’t leak it’s handy in an instant. You don’t have to dig a backpack.

[@tomsmith6094]

I used to do all that stuff but I stopped doing it because I learn by watching KZbin about another easy and waterproof and wind proof you don't need carry all those things with you no more I'm using cotton arounds with wax and crayons they burn 8 minutes longer than hotter you use a lighter or Ferro rods to light up them

[@Thefriendlyveteran]

I have used a number of the methods you went through to start fires. I always take 1. butane lighters 2. 9 volt battery/steel wool 3. Cotton permitted with vasaline 4. Wax or storm matches with case/striker. I have used many methods to teach others how to build fire. I have never used ice or chocolate and an aluminum can though. I also recently saw someone use the shiny dome of a flashlight to start a fire. Friction fires are indeed very difficult to start. As a kid many years ago we used parts of pine trees to act as an accelerant also. I'm a 62 year old Veteran. I just found you on KZbin I enjoyed your presentation. Your Friendly Veteran

[@ryankanters4385]

You can actually use the BIC lighter also as a hands free fire starter, oke so, try to follow me since english is not my language hahaha, the metal part/protector, you can pull it out, and when you press the gass button you will see the front where the fire comes from goes up, what you do, when lighting the lighter you hold the gass button and slide the metal protector underneath the part that goes up, so it will stay up and automatically keeps the gass button pressed, hope i was clear with the explanation🤗

[@kakegarcia8056]

I always carry on my edc (inside my wallet) a 1/2 inch Ferro rod, striker and a Fresnel Lens. Bests regards from a new Venezuelan follower in Panama!

[@sterlingjewkes7162]

My fav is a ferro rod with free fire tinder it is called dryer lint

[@xander1052]

Still a massive fan of ferrorods and having petroleum jelly as a backup to help starting fires.

[@xionix4]

Primary: Bic lighter Secondary: ferro rod Tertiary: friction fire (fire plow / bow drill if I have good cordage available) In SHTF, if I even /am/ starting a fire, primary and tertiary switch (friction, ferro, bic), unless calories are scarce, then primary and secondary switch (ferro, bic, friction). (In the name of resource conservation.) I say this, but we both know I'm going to be using the ferro rod over friction fire after a few friction fires out of laziness lol.

[@Gundyadventures]

Love your in depth info. I appreciate the how’s and the whys

[@spencerpearson1321]

I am a big fan of the Uberleiben tinder and Bellows It is a wax hemp ships match with a little metal sleeve that doubles as a fire bellows by helping you direct where your blowing on the fire I find it to be a wonderful option when paired with a twig stove.

[@jr-md3gx]

Bow drills take lots of practice, but once it's learned it's amazingly fast (the drilling part). I've been able to start fires in 2 minutes once the set up is ready. It's all about balancing pressure, speed, and bow hand position.

[@samthai818]

I forgot all about the battery and steel wool. Thank you for reminding me!

[@TheEdgeofTech]

Nice work man! I learned a lot and it's all good info!

[@grimgranite]

Thanks Jim! I appreciate it!

[@michaelwitham1220]

you can also do the cotton roll with rust so let your steel wool rust up it makes fine rust to fire roll with you can also use a cotton teshirt for rolling between the boards

[@grimgranite]

That would be fun to try!

[@jlastre]

I believe the matches you showed are UCO’s Titan Stormproof match. Zippo makes an equivalent Typhoon match. Before these matches became the match du jour stormproof matches were smaller. UCO still makes them usually in an all orange container. They also used to be called lifeboat matches. I have a bunch made in Florida by Lewis International back in the day. You can carry about 25 the container they come in that is 1/3 the space. I personally think it is often a better option. The Coghan’s “waterproof” matches are pretty much worthless in my opinion unless you put them in a waterproof container with a striker. Also button compasses serve a purpose. You have to understand the limitations. I have them attached to my zipper pulls and some Marbles can be pinned to clothing. They’re good to make sure you’re not walking in circles.

[@thebaetomato]

Man you videos are so well made informative and entertaining

[@grimgranite]

I appreciate that!

[@Lightle404]

You are awesome! please keep making videos, you keep them fun to watch and have reliable information thank you!

[@grimgranite]

I really appreciate you watching and following along!

[@barringtoncoleman3398]

Informative and entertaining. Nice job!

[@OutdoorExperience.101]

Primary - BIC lighter Alternative - Ferro rod Contingency - Flint and steel Emergency - Bow drill I allways carry char cloth... Good video, keep going!

[@mixmediaproductions]

Buy a ten pack of "Forever Matches" where you fill a couple and take them with in your pocket and pack. They last months and refill. A single metal piece srikes onto the wick..

[@gwydionrusso3206]

The thing is with lasers is any laser powerful enough to start a fire is more than powerful enough to fry your eyeballs without protective goggles and I don't think anyone is going to be lugging laser goggles around

[@ProtoHadron]

just watch any styropyro laser video "Lasers like theese can fry your retina in a fraction of a second" **echoes**

[@patrickallen569]

do you wear an armor set to protect your skin when using a knife?

[@Zoroasterisk]

@@patrickallen569 I don't think you understand what you're implying. Any stray beam could reflect off of something you didn't anticipate and if you're not wearing protection, you'll literally go blind forever. It cannot be understated how colossally misguided it would be to use a fire-lighting laser without goggles

[@c.e.benson3263]

​@@Zoroasterisk That's absolutely terrifying!😮

[@charleshayes2528]

@@patrickallen569 Plenty of youtubes of guys wearing a glove on their off hand when chopping with a heavy Kukri or axe and some butchers have modern chainmail gloves on their offhand, so they can hold meat still while slicing (neither is going to do much to stop the impact force of a heavy chop, but armour only did a moderate job of that anyway. Anyhow, the comparison is not between "using" a knife or axe and a laser, but getting in the way of someone's axe swing or their axehead coming clean off, or their knife slipping and skewering them as it skids off bone or something. The comment was about a misdirected beam or a beam unexpectedly bouncing off a reflective surface in an unanticipated way. Think of a bullet ricochet rather than a knife being used properly.

[@i.b.9903]

Love your personality and enthusiasm, keep it up!

[@grimgranite]

Thanks for watching and following along!’

[@carnivorecaveman]

My preferred fire making methods: 1. If there are sunlight enough, then magnifying glass (or plastic) because it is totally free. (that is, the sunlight is free). 2. In the cases of anything else: the "oldschool" ferrocerium rod, with the back of my survival knife or machete, in place of any socalled "scraper"...

[@plibani4248]

17:23 So many misconceptions about bow drill friction fire: - No you don't need soft wood vs hard wood. In fact same wood woks quite well. - Paracord is excellent especially if you gut it. - Of all friction fire methods I've seen and tested, the bow drill is the easiest at least in my European environment. - The fire plow is much much harder than the bow drill and you usually need special wood like hibiscus Here are some woods which worked for me using the bow drill method : birch, ivy, bass wood, hazel, broom. One that didn't work at all: black locust.

[@bradfry5403]

That was entertaining and informative, I do have a candle in my kit mostly when using matches even if it is just a small one that are used on birthday cakes kept in the box with the matches.

[@WILDWILLXD]

Honestly I think a zippo plus some spare flints, wicks, an innertube, and some plastic at the base makes it one hell of a fore starter. I think it's more than well worth it especially where I live. I always carry multiple ways pf starting a fire but the zippo with some spares and a ronson lighter fluid container can go months! Even longer potentially. I got about 4 weeks off a zippo with some use with a trashbag stuffed around the inser to create a seal, plus an inner tube around the lighter.

[@baan6981]

I personally love using my farrow rod it works really well. I've done a friction fire before but it's pretty wet where I live at in Oregon so dry pine bark and pine fatwood is how I get my fires going

[@grimgranite]

Thanks for sharing! I bet it’s tricky to get fires going in PNW!

[@Jakoshdw]

Only recently had this suggested by the algorithm so... late to reply... but whatever. Below are my personal thoughts on what I'd use. Not definitive... just what I personally like. My primary go to fire starter is also a bic... but I have it in a silicone Exotac Firesleeve on my keyring. The Firesleeve doesn't make it water "proof" but does make it water "resistant" against a incidental drenching from rain or a brief dunking in water. In addition it does also prevent the button from being pressed and releasing fuel accidentally and the silicone is also glow in the dark. My Secondary method is a ferro rod and a small block of fatwood with a fob of braided wax impregnated jute cord. Fatwood is nature's perfect Firestarter in my opinion as it's waterproof because of the impregnated resin and doesn't expire. The waxed jute seperates into a nice birds nest. If one can't get a fire going with fatwood shavings and waxed jute even under slightly less than optimal optimal conditions... you need to stay home and practice your fire making. Lol. 😅 My Emergency fire starter would be those storm matches you showed. As a fairly limited resource I'd only want to pull them out when I actively NEED fire 🔥 under pretty dire conditions. Marginal tinder, high humidity, high wind, extreme cold...etc. I'd likely use them with my secondary fatwood and waxed jute to help dry out my firewood. I carry on my person a custom Victorinox Yeoman (effectively a Compact Explorer) with a magnifier... so I technically EDC solar ignition but would only use it if my Bic wasn't usable for some reason. Flint and steel, fire piston, and solar ignition all fall under "primitive" fire making for me. All are still preferable and more reliable than friction fire but still finicky enough if not quite as labor intensive that I'd only want to use them during a extended survival scenario under the best conditions to stretch the rest of my more limited resources. Char being something you can replenish in the field from natural materials. (I do have several steel strikers and a rather nice milled titanium fire piston that opens both ends for cleaning with a waterproof capsule for charcloth built into the piston. With a jute birds nest and charcloth I can reliably get fire going under normal conditions with both methods. It does feel pretty "badass" to be able to make fire that way for fun.) Friction fire for me is relegated to something I practice occasionally at home for fun and hope to never need... because if things are that dire I obviously hadn't planned well.

[@theresablanton7120]

Loved the video. Good information. Thanks

[@grimgranite]

Glad you enjoyed it!

[@sombhardwaj397]

one of the best explanation i have seen

[@grimgranite]

Thanks for watching!

[@AllWeatherFirestarters]

Great Video and Channel! Any chance of maybe doing a product review on our Firestarter?

[@grimgranite]

Definitely send me an email! We can chat!

[@roberttexhe4230]

Was that interesting. Liked the concept of that fire piston.

[@grimgranite]

Thank you for watching!

[@filipoutdoors2449]

Your videos are so underrated!

[@grimgranite]

I truly appreciate that! That’s for the support!

[@kylehazachode]

At home I use my arc lighter for lighting fatwood for my wood burning stove. Been wanting to shave fatwood and store the shavings in a waterproof pill container. I recently bought a torch attachment for those big stovetop/hot plate butane cans. Excited to use the big butane torch.

[@tikkidaddy]

Yeah a bernzomatic short canister propane torch works very very well😂

[@c.e.benson3263]

What I found.... and I can't remember if it was this video or the 150 videos I've watched over the past few days... lol, is that you can use Fool's Gold to help spark a fire. Thats awesome!! Will have to try that when all this snow and ice goes away.😊

[@charleshayes2528]

Hi, Fool's gold is Iron Pyrites, and the main constituent of a steel striker or your steel knife blade is iron, so the chemistry is similar.

[@outdoorelement]

Great vid, I typically carry a couple of ferro rods (different sizes) I quit carrying lighters a few years ago after one got wet and failed me. I want to try that cotton balls and coal tip now!

[@grimgranite]

Thanks for watching!

[@c.e.benson3263]

I can't thank you enough for this video! I just started really diving into survival and began building my bug out bag not even a month ago. And I've been trying to take in at least a couple videos a day on survival and the past few days I've been listening to people discuss different ways of making fire. And I am not shy about saying that before this video.... I was unbelievably confused at the difference between magnesium, and a ferro rod, and magnesium with ferro......and flint and steel...ECT.. I literally was absolutely confused and ended up buying 8 different types of ways to make fire ...then bought 2 lighters on top of that... just in case. And I've gone through video after video and nobody sits down and goes from one to the next to the next to the next and literally explains exactly what it is... what it does ...and then shows it in the way that you do. And Trust me, I've probably been through about 30 videos in the last two days...... because I ended up with a free small cylinder-shaped block of magnesium and I didn't even know what the heck to do with it. Now I know!!🤦‍♀️ Everything I said probably sounds very stupid to everyone on here, and I wont blame you if you laugh 😂 So if you see Northern Vermont completely lit on fire one day, it will probably be my fault...now that I have every fire making tool ever made....and I got fire happy😂 I'm one of those people that others see, and just say, ..."oh yeah, she will be dead 5 min in to a SHTF scenario" But I do have a strange and uncanny Knack of being the last one standing...😆 I have subscribed and I will continue watching your channel and I greatly appreciate you taking the time to step by step explain these things to dummies like me LOL God bless 😊 Christina

[@grimgranite]

I’m so glad you found this helpful! Thanks for being here and for the comments.

[@c.e.benson3263]

@@grimgranite Absolutely! Really appreciate the videos! Keep them coming ☺️

[@xionix4]

Thank you! I have been wondering why there's so much momentum behind the bow drill and it seems almost no-one prefers the fire plow. It's nice to find someone who prefers the fire plow over the bow drill. :)

[@micahburnett2209]

Very cool

[@grimgranite]

Thanks for watching

[@alexcolon9965]

Great video! You covered a lot of different ways to start a fire, I must say. But what about hand sanitizer? It’s 90% alcohol, you can put that on any thing, cotton balls, fire nest, piece of cotton, etc. and who doesn’t have a small bottle hanging from their backpack already! Lol.

[@grimgranite]

Thanks! I tried to limit the scope of the video to ignition sources and not include fire extenders, like hand sanitizer. Perhaps I should do a video on extenders!

[@misolgit69]

especially if you're not a smoker keep your matches and lighter(s) in approximately sized press to seal bags just in case

[@ScottDamery]

I use cotton balls and Vaseline, but have since added duct tape to the mix then I light it with magnesium and striker

[@stuartthomas2400]

My favourite emergency method is to expose a lithium battery to the air. The battery does not need to be charged. Your dead $700 smart phone can now become a whole lot more valuable in a life and death situation. This is a super powerful technique BUT it is a one shot only deal.

[@grimgranite]

That is true! I think I should do a video on that. Thanks!

[@jeremyd6775]

My primary is a bic, secondary is stormproof matches, and my back up is a Mora companion spark.

[@grimgranite]

Nice! I recently got the Mora spark, I need to try that out. Thanks for watching!

[@bluesteel-ps1wg]

My favorite method is one you left out The fire piston is a super satisfying method

[@grimgranite]

Fire piston is in there! 😅

[@bluesteel-ps1wg]

Had to re watch the video and missed it the first time around haha my bad

[@pt.eforestmanagementconsul5712]

Magnifying lenses / Fresnel lense and char cloth works a treat. 3 Secs in bright sunlight.

[@cardiacbob]

I keep those UCO storm Matches and regular wooden kitchen matches in my match case... I turn the kitchen matches upside down in the match case and I can fit 8-10 in the case with the UCO matches.

[@grimgranite]

That's clever! I like the way you think!

[@tikkidaddy]

You can also use 0000 steel wool with a Ferro for ignition. The key in this case is the small amount of oil on the wool. If you take 0000 wool and degrease it , dry it out its much harder

[@Tattoo8732]

Subscribed! 🎉

[@grimgranite]

Thanks for following along!

[@3AlarmBushcraft]

A large plastic serving spoon from the dollar store works like the soda can bottom except you dont have to polish it.

[@brianbartulis9709]

Cold Bic? I pop the body of in my mouth a tad. Wet Bic? Just run it down your thigh a few times after blowing out excess water. (remove safety dohicky) I've never bow drilled fire, but I keep a larger oyster shell in my fire kit to aid a tad using a bird nest/other, as tinder. BUT, surely it would make a dandy bearing block...bearing block being something many struggle/lose momentum with. Or pain to create with least friction. ~ From what watched in drill fires, if the fireboard doesn't begin to smoke in say 20/30 seconds, something needs to be changed...if possible. Choose wood choice/sections wisely.

[@tempestindustries9446]

I haven't started many fires but my favorite was first timing a ferro rod with some logs and a couple sticks at the beach Sucks i lost the knife that had it inside of it 😕 it was a really nice knife my dad got me and the rod was nice and long. Was really fun tho (actually i think i have the knife in storage but i think i dropped the ferro rod in yhe sand) Hopefully when i get time to get my drivers license i can start camping ive always wanted to since i was a kid

[@createvideo561]

Newer methods: 1)sulphuric acid and chlorate mix 2)lithium shavings (inginites spontaniously with unusually high energy also they ingnite get this on contact with moisture and also any alkali metal would do) 3)nitrocellulose friction lighter charges 4)amorophous boron ro start large stubborn fires(i use them as my last resort) 5)Reney nickel(get it yourself) 6)Ceramic pressurised triethyl aluminium(a bit dangerous but incredibly useful) 7)Anhydrous aluminium chloride and alcohol(quite violent but works) 8)A nice small quick bottle of magnesium silicide 9)sosium bismuthate and almost anything u can dinf flammable even wet! Also non toxic! 10)Unusually a small pile of platinum or iridium powder i keep as well it's a bit complicated but it almost always works with potentially countless times 11) a small bottle of calcium dichlorate aluminium trifluoride and a seperate bottle of water(better) or ruin it all carry what i do a small bottle of chlorate and sulphuric acid. Or even ether coated lithium indused sosium chloride works. (Note: these are the things i have in my kit along with other [almost a hundred different methods] and some of them are oretty dangerous and should be used with caution, even i wonder how they fit in my 500gm kit) And countless other methods....

[@Orlosthedruid]

Bic with a long neck and a quart of Boy Scout juice on charcoal.

[@bushwackingozarks1860]

Hey man, it was a great video! I would use a bic lighter as primary and a 2nd and 3rd bic lighter as secondary 😅.

[@grimgranite]

😂 love it!

[@micahburnett2209]

your welcome

[@thetopnacci]

Road flare! 😎

[@createvideo561]

I use potassium perchlorate and phosphorus mixture for my survival experience also u could in principle use white phosphorus just like my grandpa did once .....

[@createvideo561]

Note: i use red phosphorus

[@clivedunning4317]

I always used to use ordinary "strike anywhere" matches, coated in candle wax and wrapped in a small piece of aluminium foil. You can no longer buy them in the UK. The EU banned one of the constituent chemicals on safety grounds and Bryant & May/Swedish Match would not reformulate them. Nowadays I carry two or three "jet"lighters , with a ferrocerium rod as backup, but I genuinely miss old fashioned matches, safety matches and their striker surfaces are the pits.

[@HikerBikerMoter]

Dont forget the manganese or charcloth or waxed cotton ü

[@clivedunning4317]

@@HikerBikerMoter Yes , you are right , HikerBiker. My post is more of a moan to lament the vanishing of proper "strike anywhere" matches like "Englands Glory" , "Swan Vestas" and "Scottish Bluebell".

[@DanSlotea]

Replace the Bic with a Clipper. A lot better. No need for friction when using permanganate with glycerin. Just get the ratio right and it self-ignites. Sugar requires a bit of friction, but don't ever use metal, it can explode.

[@AGPfacecast]

I am subbed. 😉watch you on Tik and realized you had a channel.

[@grimgranite]

Awesome! Thank you for following along!

[@ishinfinity3336]

Making a beeswax based antiseptic balm to use as lubricant / water barrier for knives , protective cream to prevent drying out skin or water proofing things , a fuel source that can easily become a candle , obvious first aid use as an antiseptic , and more would be awesome not sure how feasible it is

[@scottcatchot1598]

Have used potassium permanganate with wounds many times, did not realize the chemical fire angle

[@Gamer-King69]

Hey, im new to this channel, could you please do a video of what to always have with you? You say you always need to have kits, one with you, one in your home, one in car etc.. could you do a video what to always have with you?

[@davidwingate2395]

My armpit is the perfect cold weather bic warmer.

[@grimgranite]

That arterial blood flow is perfect!

[@NormanLim]

you can also ignite steel wools with a ferro rod..

[@jimmiddletonnixa]

In my EDC it’s: Primary: ferro rod from knife sharpener Secondary: ferro rod from necklace Tertiary: ferro rod from Leatherman signal 😂

[@grimgranite]

I love it!! More of a good thing is a great strategy! 🤓

[@greedygringoprospecting6941]

use the doans magnesium bar.

[@ishinfinity3336]

What are your thoughts on the suunto clipper ?

[@edhannon2553]

Emergency sources...Will Light fire starter and/or road flares

[@dennisleighton2812]

0:46 Bic in cold - your solution is very practical. Anywhere inside your clothing near the skin will ensure it works. 0:56 Wet - best is to stop it getting wet in the first place. How? Very simple. Raid your wife's kitchen for some small Zip-loc bags and place your Bics in those. Done. 4:02 Waterproof - ditto, as for Bic. C'mon guys, get real. Prevention is better than cure. 7:29 Cool yes, but expensive. A Bic 3-pack costs $2,37 on Amazon! 11:01 Flint & steel. If you end up with this as your only last resort it just means your planning was $h1t! Even an empty Bic can do what this does. Interesting collection of ways and means. Personally, I go for sure and simple, and get on with other more interesting outdoor activities while sipping piping hot coffee I've just made on my Bic fire!

[@richardelliott9511]

Amazon also has a couple of different types of silicone "caps" for bic lighters to keep them dry and clean.

[@dennisleighton2812]

@@richardelliott9511 However, I'm pretty sure they are much more expensive than Zip-loc bags. Good idea though.

[@richardelliott9511]

@dennisleighton2812 oh, they are but also far more durable...

[@dennisleighton2812]

@@richardelliott9511 🤣 LOL Yeah but you can have 10 Zip-locs without even feeling the weight! abut, point taken. Have they ever been tested for effectiveness?

[@m4vr1ck]

Let me know when they make a plasma lighter with a type c port

[@ishinfinity3336]

I would wait for the company to come out with a usbc version , or do you have any usbc version recommendations of the plasma lighter?

[@grimgranite]

I haven’t tested one that uses USBC yet, but I agree, that would be better!

[@spaceman53]

i love watching our door videos KNOWING damn well i hate going outside, hoever on the off chance the world goes to heck and hell i got the knowledge to live for like... three hours

[@flyndutchmn]

90° SPINE FOREVER!!

[@davesherrisandry4165]

Please review the rino ready pack

[@kamalumusa]

Thanks for the feedback🔌 Expect more videos soon👊 Send me a message to the above👆 Name on Telegran I have something special for you stay tuned for more videos 🎁

[@davesherrisandry4165]

I don’t have telegram

[@davesherrisandry4165]

If I were to download the app what should I message you about

[@davesherrisandry4165]

Sorry to ask so many questions just want to be safe

[@TulkOrkan]

Doesn’t armadillo give you lepracy when you eat it

[@grimgranite]

It can, yes! Best not to eat it.

[@ishinfinity3336]

Use the plasma lighter with the steel wool?

[@ishinfinity3336]

Would that be safe for the plasma lighter ? Would it work as well or better than a battery?

[@ishinfinity3336]

Also arc lighter will probably hurt a person more than a stun gun so possible low level deterrent

[@grimgranite]

I think it’s safe as long as you don’t press the steel into the electrodes before starting the lighter… it could short out the lighter perhaps.

[@gordonlgb]

Most gadgets you can built yourself.

[@Tscharlieh]

My Zippo is always empty when I need it…

[@seanofseans]

Do you have a Patreon? Would love to contribute.

[@grimgranite]

I appreciate you, Sean! I am working on setting one up. I will post on the community page soon. Thanks for your support!

[@G4Disco]

I can't quite place all the YT personalities in the short.

[@COSETAM1]

Very old and already known information...

[@grimgranite]

Where’s your KZbin channel with all the “new” information?

[@greedygringoprospecting6941]

lighters are useless. carry multiple ferro rods. and water tight cases. to keep tinder dry. all you need.

[@mcrobielord1503]

Flint and steel instead of using char cloth use steel wool in place of it. My second favorite way of Starting Fire is my ferro rod

[@grimgranite]

I need to try that! That sounds like a great idea.