The Ultimate Lift Guide For The 1st Gen CRV from 1-4"+ ( RD1/2/3)

Hi guys! I put together this video the best I could always room for improvement keep that in mind but hoping that this would be very helpful for many people as a go-to guide and resource. I am going to update down below with all of the links two things I suggested in this video soon so stand by for that and again thank you for your support on the channel and if there's anything I can add to please let me.
CRVTOM GETS YOU $10 OFF AT www.hrgengineering.com
Links here below!!
LOOK UP PARTS FOR 97-00 CRV
www.hrgengineering.com
www.truhartusa.com
www.mevotech.c...
www.moog-suspe...
www.napaonline...
www.rocky-road...
www.ironman4x4....
www.crvownersc...
aerogenicsusa....
1320performance...
www.tirerack.c...
www.greenballt...
whitelineperfo...
siberianbushin...
energysuspensi...
How To Vids.
• How to LIFT a HONDA CR...
• Video
• Installing a 2 inch su...
KZbinrs in this vid.
/ @isakjetbean
/ @beefybuilt488
/ pngailanboi
/ @silver_rd1545
/ @hrg_tv

[@xandersaliba7794]

I’ve got an 1999 Honda CR-V that’s non road worthy because of panel and window damage. I’m trying to fix it on a budget and I’ve figured I’m going to lift it first and then do panel repairs and replace widows. Thanks man I love your work and u have inspired me

[@deancooper7933]

I’m glad I found your videos I have six CRV’s three first GEN threesecond GEN I love them and I want to lift one of each I’m glad I watch the video thank you

[@crv_tom]

I'm glad you found the channel also and I appreciate it I'm glad that I'm able to help and rest assured I definitely will keep updates and if I'm wrong on something on the kind of person I will let you guys know or if I found a better way always willing to help out the Honda community

[@nightrider4594]

Thank you sir! That was a lot of extremely helpful info. I will be buying a first gen off my daughter. My oldest son and I convinced her to buy it, but got fed up with the whining and complaining about having to fix a few things on it. Even though my son and his friend did a bunch of stuff for free. She doesn’t seem to understand the value of it and the fact that it’s over 20 years old and there will need to be some further investment. So I just told her I would buy it from her no problem! So I will be making a plan on what to do with it. Hoping to avoid some of the mistakes my son made with his and gleaning the wisdom from gentleman like yourself. Thanks again

[@crv_tom]

I'm glad to hear you will be keeping the CRV and moving along with it sad to hear she doesn't understand it hopefully she will one day also I'm definitely happy to help out any time I will do my best I'm always learning also but I try to pass on as much as I can and any updates and things I find that may be better

[@rickyanderson6101]

I recommend you put the lil sections on the videos. Especially when they're this long, it helps quite a bit. Great video thoe man, you seriously are an awesome individual!!

[@crv_tom]

Thank you man that is an awesome idea I truly appreciate that I'm slowly learning.

[@josephespinoza4658]

All great information! I've definitely used a lot of the same items on my lowered one! I've bought Napa axles only because of you! I hope your heart gets better and pumps properly!

[@josephespinoza4658]

But I believe I went with new Napa axles by mistake and so far they are good but I think they clunk from 0-5 mph. So only when you start up.

[@crv_tom]

I appreciate it brother thank you I'll find out Tuesday after doing a nuclear stress test. On the axles I have heard some people buy new being okay and some not so good but as far as the remanufactured I have heard all is good I actually only had one bad set and they replace them right away and I was good to go so I just generally stick with recommending nose but it's good to hear you had success with them.

[@josephespinoza4658]

@@crv_tom Definitely let us know the results even if it's in a KZbin story. I was attempting to get the reman. ones cause you suggested them but I mistakenly bought new ones from Napa.

[@dmax9731]

A lot of good information on the videos . I just ordered brand new struts in a sub frame drop from watching your video thanks 👍

[@crv_tom]

Glad I could help

[@MRS.CRV_TOM]

I am so proud of you and all your work :D i love you

[@sergiosalazar7339]

The 96 97 jeep Cherokee mesh fits my 2000 crv 2wd. Just barely no rubbing on brake caliper or anything im able to rotate the steering wheel both ways. Stock suspension clears front and back tire size 225/75/15 looking great. I do have a 2 1/2 arow genics spacer lift kit ima install tomorrow. Great video info👍

[@crv_tom]

Right on

[@justinread8737]

Dude thank you so much, thank you for helping a new brother out!! Great channel man I love it, happy holidays!!

[@crv_tom]

I'm glad to help brother and Happy Holidays to you also!!

[@reginaldredman6767]

Finally got to watch this video. Thank you. Needed this information. Btw, Spunky a cool 🐱. You and Youngstatic have 🐱.😁 Great video and information.👍

[@crv_tom]

Glad it was helpful Bro!

[@ridebiking]

Thanks for this video!!! ✌🏻

[@AlexGarcia-cb6uc]

I have cRv to Yours it’s beautiful 😍

[@amarks5436]

We really need more torque and a shorter first. I'm thinking a k24 with custom 1-2 gear set, plate lsd, and a pinned rear end would make the crv more capable than a wrangler.

[@ohhailkingbobby1073]

Video got alittle confusing sorry so i have to ask What is the max spring lift spacer(front and rear) you can go on 97-01 crv without dropping the subframe? Thanks

[@crv_tom]

Inch and a half to 2-inch otherwise you're going to start seeing axle bind issues even the 2in make it kind of tough.

[@cadejohns7299]

Youre the best this was such an informative video thank you. If I get the 2” lift with old man emu kit, what other suspension work do you recommend? It’s stock right now

[@crv_tom]

Hey thanks man! You will be good with the Old Man Emu springs I used to have that set up on my 2000 CRV they are great what you want to do is get an inch and a half rear trailing arm spacers from HRG and of course update all of your stock suspension parts you would be good with those but to make it even better and smoother I would suggest Truhart lifted front control arm/camber kit and rear camber kit and then it would be a pretty solid set up for what you to do.

[@phaxiong95]

2001 Honda CR-V, at 159 k miles

[@simple6786]

Hi, I was wondering if you would recommend 235/70/15's on a 2 inch hrg lift with no wheel spacer's? Fyi, I also have the 1 inch trailing arm spacers installed. Thanks for all your help and videos! Hope you get well soon.

[@crv_tom]

You could make that work it wouldn't be to bad at all.

[@simple6786]

@@crv_tom I just bought all new suspension. Mostly oem. Trying out the whiteline trailing arm bushings and siberian sway bar bushings also.

[@tdi_on_top]

Thank you love the video

[@crv_tom]

Np I hope it helps

[@DailyHandyman]

I'm wondering if I could install TruHart Coilovers to lift my 1st gen up to 3 in without to have a subframe drop??

[@crv_tom]

You could but I wouldn't recommend it long-term 3 in without a subframe drop.

[@brianmccleerey9798]

Thanks for the video @CRV_TOM . I just subscribed! I'm doing a .25" HRG shim spacer lift in the front plus .25" HRG lift shim in the rear. On top of those spacers, I'm installing .78" OME lift spring in the rear. The total effective lift is said to be about .5" in the front and 1.03" in the rear. Pretty modest. I am also replacing the front springs with genuine Honda springs. I am hoping that my lift is modest enough not to require extensive modifications to camber arm, trailing arm, sub-frame etc. What's your opinion? It's a daily driver with 158,000 miles, rebuilt transmission, and excellent condition motor. I don't want to ruin it!

[@crv_tom]

You should be completely fine with that setup no big issue should come of that just make sure you get a good alignment afterwards.

[@brianmccleerey9798]

@@crv_tom You're a legend thanks. I recently swapped some parts around. I'm now installing OME 2797 and 2798 lift springs front and rear. I'm wondering if I should add an additional .25" or .5" lift on the rear to balance it out. I don't want to lift it too much and invite a bunch of issues. Should I just do the springs or put the shims on too? This is a daily driver. Thanks! I commented the same question elsewhere on your vids.

[@scurvy1640]

When running OME springs.... do you not need trailing arm spacers, adjustable front upper ball joints, and/or adjustable rear upper control arms?

[@crv_tom]

No but I would highly recommend it it makes everything a lot more adjustable and your alignment will be much more manageable.

[@craigiefconcert6493]

Does lifting a CRV actually make it off-road capable at all? I love my V and would like to be able to take logging roads and mountain trails. I think without a locking differential or low gear it wouldn’t cut it.

[@crv_tom]

You would be extremely surprised at what these little CRVs could do especially with mods the right way. That being said they are not a Toyota 4 runner or a Jeep unless you were willing to go to extreme modification with them but they will surprise you and there's not much for trailing that they can't handle other than extreme trailing trailing that is pretty much meant to push any vehicle to its max.

[@tintin3]

Hello man, do you recommend adjustable lower and upper ball joints for lifted crvs??? Thank you for all the info!

[@crv_tom]

I haven't seen adjustable for lower but yes I recommend adjustable for upper

[@phaxiong95]

Hi Tom, i just bought a 2001 crv white like ur with a already lifted 3 inches with 235-65-17, would i have to do anything else if i back the factory 15 inch rims. Pah, from mn

[@crv_tom]

Hey Pah how's it going? I'm not sure what you're asking here do you mean you were talking about going back to the 15 inch Factory wheel?

[@phaxiong95]

Hi Tom, I just bought a vodoo blue, manual 5 spd, Y is my rpm so high at 60+mph and rpm is at 3.5 to 4,000 at 80 mph. Pa

[@crv_tom]

That's normal gearing for those Transmissions.

[@phaxiong95]

The car is pulled to the left so do i need alignment, i look and its a 3 inches in rear struts and 2.5 inches in front

[@crv_tom]

Yeah you would definitely need alignment it shouldn't be pulling like that.

[@phaxiong95]

Tom, i mean is it ok if i go back to 15 inches 235-70 or 75-15 like you mentioned because this guy lifted but 235-65- 17 jeep rims

[@crv_tom]

You should be able to do that and be just fine.

[@gmtz235]

I have a question 🙋‍♂️ if I lift my crv 1” inch strut spacer front/rear, will I have trouble dealing with axle wobbles like the 1.5”-3” inch lift kit

[@crv_tom]

As long as you have good axles that are in decent shape you should not have have an issue with that size lift with your axles but also make sure your torque mounts are in good shape and not bad and engine mounts.

[@gmtz235]

@@crv_tom yessir will do appreciate you’re feedback💯

[@Joe-db4dk]

Hey, Good Morning. I really hope that your heart is doing better by now 🙏. I have a question, I have been reading and seeing aLot of different KZbin videos on lifting a CRV. I just bout a 99 with 132,000 miles. I bought it to make it my daily, I have a half hour commute to work every morning but I am very interested in lifting it, getting a whole suspension system. My mechanic said he can and will put everything for me in just have to buy all the parts witch I am willing to do ASAP lol. Can you please recommend any Kits I might be able to buy as far as wheels, tires and again the whole suspension kit, struts, the whole 9 lol... Only looking to Lift 2 till 3 inches. Have to make it as safe as possible because I have 2 kids I drive with at times. Please and Thank you in advance, I hope this message gets you. 🙏

[@crv_tom]

Take a look www.hrgengineering.com It will have everything you need and break it all down for you.

[@phaxiong95]

Why didn't HRG have other colors for lift kit beside green

[@crv_tom]

I would assume so to cut costs down but I believe you could always contact them and see if they could do a custom powder coat color for you but it may cost and take much more time.

[@troybranch9720]

Lift springs with spacers or stock?

[@crv_tom]

It really depends on what you're wanting to achieve.

[@deciferous4]

Hi Tom! Any chance you can help me ship those TRQ struts and springs here in Manila Philippines? Also that 2 lift, if possible. Currently using 235/75/15 mud tires

[@crv_tom]

Sorry, no i can not at this time.

[@_KIRILL_T]

Too bad there are no subtitles 😭

[@crv_tom]

Not sure how to do that yet I can look into it though and see if I can get that done does KZbin not give an option in different countries to translate?

[@reginaldredman6767]

Finally got to watch this video. Thank you. Needed this information. Btw, Spunky a cool 🐱. You and Youngstatic have 🐱.😁 Great video and information.👍

[@crv_tom]

Glad it was helpful!