The Ultimate Seat for 2018+ Honda Goldwing | Cruiseman's Reviews | 2020

[@MotoRideswJohn]

I couldn't agree more! You nailed all of the Pros and all of the Cons. I installed my Ultimate seat about three weeks ago and I've fallen in love with the Gold Wing all over again. As far as I'm concerned, the fact that the seat is SO much easier to install and remove is one of the best reasons to purchase it. The fact that it's beautiful and comfortable is just icing on the cake. I couldn't commit to sending off my seat pan for several days or weeks as the bike is my daily driver to/from work. Ultimate certainly checks all the check boxes for me!

[@stevedunn4490]

OMG this seat is amazing! I don’t want to trash Corbins design, I love some Corbin products, however this Ultimate seat is on point! We bought the Corbin for the 2018 Goldwing and found it very disappointing driver especially, rider it was just ok. The Ultimate seat is fantastic they nailed it! Thank you for many more miles ! Lori Dunn

[@IDYLBERRY]

I bought an Ultimate seat for my '05 GW about 3 years ago, what an improvement. The rain cover was an extra and back rest were extra. I bought the standard black seat and passenger back rest which positions the passenger 15 degrees more upright that made my wife more comfortable. You need to be patient when putting the rain cover on as mine started to separate at the seam. I reinforced all the seams with Tenacious Tape. I have had a hip replacement that cuts into my saddle time comfort but I'm not ready to stop riding. If you are going to buy the Ultimate seat buy all the extras and save on extra shipping costs. Cruiseman, I always wear a back brace when riding. It really helps especially when going over a bump or pothole. Thanks for all the great videos!

[@stevedunn4490]

I just sold my Corbin for my 2018 Goldwing, it was worse than the stock seat. I bought an Ultimate and it is really good. Very happy

[@TheUltimateSeats]

Thank you, Steve!

[@stevedunn4490]

TheUltimateSeats keep up the great work.

[@rogervanoverbeek7105]

I had a corbin on my SuperTenere and it never did break in. I was disappointed that it did not offer me much comfort beyond the OEM seat. It was rock hard.

Corbin seats have never really worked for comfort. They are a cosmetic butt jewelry item. Russell Day Long saddles are the choice for many Iron Butt Riders and that is all the testimony I need.

[@robertf3340]

@@rogervanoverbeek7105 I had a Corbin on my 2012 Goldwing and it was worse than the OEM seat. I'd never buy a Corbin again.

[@cliftonhoward7926]

It looks like a great seat but I'm not sure I would spend the kind of money they're asking for it. Like everything else the cost of adding anything is just overpriced in my opinion.

[@danielmoriarty751]

Clifton Howard there actually one of the cheaper seat companies on the market as far as price goes. By far the most comfortable seat I’ve ever put on my bike I’ve tried Corbin, mustang, LD seat company and bitchin seats. Not to mention they’re one of the only companies out there that will let you test their seat for 14 days if you don’t like it you can send it back. Most companies as soon as you bolted to your bike it’s yours No returns.

[@Realhappiness2260]

When I purchased my 2018 used, this seat and backrest were already on it. I didn't realize it wasn't stock for a while. I was glad the previous owner did the upgrade. That really explains why I had no issues driving it home from Ohio where I purchased it, to Virginia..565 miles. I split it in 2 days because my wife was driving the car back. Love the setup.

[@michaelcadiz1004]

another great review chris. have several riding buds that have had an ultimate said the same thing hard as a rock then it just went away n they would ride for hours..

[@JohnnyC10071959]

I owned an Ultimate King for my 2006 Wing, it was a good seat but it did not compare to the Russell Day-Long. I am an long distance rider. I put 350k on my 2000, 250k on my 2006 and have about 79k ion my 2009. The RDL seat has over 300k miles on it and is in great shape. It is covered in leather.

[@05ST1300ABS]

I never had a Russell Day Long and the important aspect of the Ultimate KING is it moves you back. I'm taller than John Cooper and weigh about the same. Never felt a need for anything else but an Ultimate since 2012.

I have three bikes, all with RDL saddles. Pricey, but worth it. I can ride all day on any of my bikes with very little "monkey butt". Tank to tank, for as much as 500 miles per day, no pain in the tush.

I have purchased the Russel Day Long Saddle for the last three of my bikes. Russell Day Long is the choice of Iron Butt riders. Good enough for me.

[@340Captain]

Very interesting ! What do you think about the CORBIN Seats ?

[@tjrosario9439]

I've had a Ultimate seat on my 2012 for about 5 yrs. One of the first things I did was seal the stitching with boot water proofing. I've ridden in hard rain and had it parked at the motel in the rain over night without the cover and have never had a problem. I had about $1800.00 in mine also because of the options, but after 5 yrs I still think it was one of the best things I did to my wing.

[@kylepayne9657]

Thank you for the tip using boot waterproofing. I just ordered the seat and will apply your technique once it arrives.

[@Tmaranatha13]

I keep mink oil on mine and has worked great for many years

[@jimtomstimpson1477]

Beautiful seat. It looks very well made. I have heard very good things about Ultimate Seats.

[@wileyt8423]

Headed out right now to put it on " Val"kyrie Freya! Thanks & Safe riding C-Man!

[@doesntmatter5704]

Another excellent video Cruiseman, I have been waiting for your mystery seat review and pleased that it was for Ultimate Seats, as I have been researching them for some time and waiting for their seat heat integration to the Honda OEM rider/passenger temperature control (which has taken some time). Thank you for creating these videos and I look forward to the next. Stay safe.

[@lewismingledorff6417]

Not waterproof is a deal killer. Thank you for the review, Chris. Excellent as always

[@volfan1nga]

I'm installing an Ultimate seat on my 3rd different bike now (2021 Goldwing). Don't let that scare you away. I've ridden in the rain many times with Ultimate seats. They don't get "water logged" and they don't remain wet for extended periods.

[@bryceblack12261]

​@volfan1nga does the 2018 seat fit on the 2021+ models? That way I just have to buy the passenger backrest when I upgrade

[@danielmoriarty751]

That’s actually relatively cheap for everything you received. I spent $1300 having a custom seat made. That wasn’t with a back rest or any of the extra bullshit you got with that seat. By the way there’s not a seat on the market that is water proof. If you want to try and waterproof their seat do what every other manufacturer does out there spray the sea with pledge it seals the stitching which is where the water goes through this is normal on every seat on the market not just theirs.

[@allenchevalley5322]

I wash my bike quite often, the seat not being waterproof is a deal breaker for me. I have no issues with the OEM seat it’s good enough for me. Nice video though Cruiseman

[@TheUltimateSeats]

Hi Allen, Washing isn't an issue - it's only when water is allowed to pool in the stitch lines. Our premium marine grade vinyl is completely waterproof.

[@stevedunn4490]

The best part of this seat is the driver backrest, awesome design compared to Corbin and others.

[@cruisemansgarage]

Agree.

[@toanogreen]

I didn't like the look of the new Goldwing until I saw it with the Ultimate Seat. It looks beautiful. I've had the Ultimate Seat on my past 1500 and my present 1800. In both cases I was fortunate to get deals on eBay. Love it!. I wouldn't ride a bike without it.

[@TheUltimateSeats]

Thanks - we appreciate it!

[@billnicholson6673]

Hi Cruiseman:::it would be nice if you compare the ULTIMATE seat vs the Russel Day Long !!! I’m in the same market for a seat and money wise their very close. Wild Bill

[@mrdonsmith]

The look is stunning and the easy install/removal is a big plus. Did I see a pocket on the back of the riders backrest? I’ve always wanted that. But it’s the extended, uninterrupted riding time that interests me the most. I really feel the pain sitting on my 2018 Goldwing Tour DCT stock seat after 45 minutes or so. Thanks for the really informed review Cruiseman.

[@stevedunn4490]

Don Smith yes. My wife likes that little pockets for her glasses and such.

[@cruisemansgarage]

Rickee keeps her tissues (women) and a small digital camera in that pocket!

[@aug9301]

Great review as always. Looks like a wonderful seat but since long distance is my thing, I wouldn't want to have to think about the rain cover every time the weather turned. After watching your review the Wingsoft rebuild, I rode out to College Station from Virginia and took the plunge. It made a world of difference.....very happy!

[@volfan1nga]

Just a heads up for some of your viewers...I've owned 2 previous bikes and installed Ultimate seats on them and just ordered my third seat for my new 2021 Goldwing...That little flap that covers where the driver's backrest goes in, if you double it over as in your video that little flap will develop some "memory" and eventually the Velcro will no longer keep it flat and neat. When you slide the driver backrest into the slot hold that flap out of the way until it is all the way in then release it. That will keep it nice and straight.

[@Story_Teller925]

I have one these on my Harley put about 60k on it. Max ride was I did was 900 miles in one day. Probably be even better on this bike. My next bike purchase .

[@stan1300]

Hi cruiseman great job and a very nice informative video. How does the ultimate seat compares to the wing soft mod. seat in turns of comfort? It kind of look like the comfort level is close to the same 2hrs. plus riding time for the seats. $500.00 vs $1800

[@billdonohue2389]

I know this is old, but tell us the difference in the Ultimate and the Wing Soft. I have 3 bikes with Ultimate seats and I agree they are the best.

[@lonniecross4698]

That kind of money and its not waterproof. That's a deal breaker for me.

[@cruisemansgarage]

It's not uncommon on custom, stitched seats for them to require a rain cover.

[@Jarvisbiker]

i've had one on my 2005 GL1800 and every minute i'm on it the comfort increases as the seat breaks in, love it and so does the wife as she always complained about the OEM seat not being comfortable. Great video Cruiseman, lots of information. thanks for the vid....

[@InFireTruk]

Great video Cruiseman. I had an Ultimate seat on my 13 Suzuki Boulevard C50C and I loved it. I'm going to do more research before I change out the seat on my 2020. I'll ride it for this year and see how I feel. I too am "boney" back there....maybe I should be doing more squats!?!? lol Ultimate does make a quality product! Thanks again!

[@linmart1]

Just buy a RDL and be done with it.

[@MotoMengy]

I would never buy a seat that isn't waterproof, I do too much long distance riding in all manner of weather. Dang shame because I like it otherwise, but wow is it expensive!

[@cruisemansgarage]

I am not aware of any custom seat that is "waterproof". If they have stitching, water can get through. That's why they all come with rain covers.

[@MotoMengy]

@@cruisemansgarage I guess the stitching is the key then. I had many aftermarket seats for my previous Harleys and they were all weather. I guess they were all one pc covers without stitching.

[@charlessadler1721]

I have a Russel Day long seat that I got made in a waterproof material instead of leather. I know it is not waterproof in the true definition but if it is out in the rain, the padding underneath is not getting wet.

[@wflentge]

I just installed the seat, driver backrest and Passenger backrest on my '19 DCT Tour. It went on way too easy. I took a ride around the block to get a feel for it and I am grateful for getting the Tallboy as I have a bit more leg room and it does not feel so wide around the upper thighs/crotch area. I had the heat turned on the seat to see if it worked, but I could not get a good feel for it. It is 106 degrees right now here in Gilbert, so hard to feel heat coming from the seat when there is more than enough heat around you. Will try the heat in early morning to see if it works. It is a pricey seat but not so much more that a Hartco/Diamond. I can tell the higher quality vinyl of this new seat compared to the stock seat.

[@danielkleiner9560]

This video has been up for three months now. The biggest pre-sales complaint is the waterproof issue. For those of you that own the Ultimate, is the lack of waterproofing an issue?

[@joebrewer5885]

How would you compare it to a RDL? It takes a lot of thought to spend $1600, I need several peoples opinion.

[@kylepayne9657]

I was going to purchase a RDL but several people stated you have to lean forward to plant your feet on the ground & I’m already vertically challenged on this bike with the stock seat. Those that purchased to RDL seem to love it.

[@Hogdriver88]

That is a beautiful seat! The first thing I thought of was, what about rain. (It's got a cover) Ok, what about riding in the rain. (Sit on the cover) Ok, what about that passenger back rest. (bingo - no cover - that's a problem) As much as I like the way it looks, I don't think I could drop that kind of coin on it, even if it's super comfortable.

[@TheUltimateSeats]

Hi Hogdriver88, Any aftermarket seat that has stitching is not waterproof. All of the aftermarket manufacturers sell rain covers. However, ours are the only ones that are custom fit for each seat we offer - and less like a shower cap (universal fit). Additionally on the passenger backrest - it’s not required as the passenger backrest is vertical and water isn’t able to pull on it. We only offer the raincover for the driver backrest so that it keeps the items in the driver backrest pouch protected from rain.

[@mikewilliams8311]

@@TheUltimateSeats is the seat he’s reviewing a standard or Tallboy?

[@ronfriedman8740]

As much as I would have liked to installed, I balked at the Ultimate seat for my 2014 GW - $1,700+ and not waterproof? After installing the Utopia backrest on the stock seat and knowing water must be getting into the foam due to routine washing and rain, I have yet to notice any visible or functional deterioration. Personally, if I can ride an entire day, taking time for rest stops every 2 hours, I'll do without an Ultimate or Russell and put that money towards Traxxion Dynamics suspension or other upgrades. Still, I understand we're talking about the 2018+ model, which is reported as being far less comfortable than the previous model.

[@SuperSYMPATHIZER]

Your right couldn’t be easier to install back rest& couldn’t be easier to have it stole either!!

[@jeffreybrodsky7275]

excellent review. few comments.....I have an Ultimate Seat for my VTX 1300 that I bought in 2006. It has allowed me to ride most of the day without the horrible pain the VTX stock seat gave me. It too a while to break in......months. It is not waterproof, so I used waterproofing polish for shoes on it. this has worked very well, tho it darkened the threads. I do believe it enhanced the looks of the bike, as it does on the Goldwing. I have had my 2019 GW Tour since Sept and have put just over 3,000 miles on it. I have tried riding without anything with extra padding and am able to do so, so far. for longer rides, I wear MotoSkiveez underwear which has extra padding built in and costs much less that a new seat......

[@holymoly7644]

I have always loved the GoldWing, have been a GoldWing rider for almost 40 years. I do not understand how anyone sing any sort of praise for a GoldWing that cost in the UK = to $42,000, then fork out almost $2,000 for a decent seat. To me it is a reflection of its overall quality

[@jamesb.2064]

I do a lot of road bicycle riding. After buying many seats over the years, the seat I swear by now is a seat which is only slightly padded and very stiff. It seems that softness sucks, because the longer you are on the seat, your butt finally sinks down to the hard base, which causes you to become uncomfortable and sore.

[@domster200]

If clothing stitch lines are taped waterproof why not seats?

[@tomboyd224]

Agreed. My Aerostich Darien's seams are *all* taped, and the suit is claimed to be waterproof. Perhaps they're concerned about the seam tape failing, what with the constant abrasion from the seat foam?

[@acim2228]

love mine 10 hours riding easy breezy

[@W0DAN]

I bought my Ultimate seat at Wing Ding for my 2018 Tour. I have heated seats, but I have to use a remote to turn it on. What am I missing?

[@82julianb]

Dan Gray you purchased the seat too soon. The new seat is integrated with the OEM controls.

[@stevesalins7561]

I have been waiting a long time for you to review your new seat. It sounds like you like your ultimate seat. I was surprised at the cost. I decided in getting the Russell Day-Long seat from everything I have read. I had Bike Solutions modify my seat. However it still isn't comfortable enough unless I use an AirHawk pad with it. I am hoping the Russell seat will work. Will comment after my seat comes back from Russell and ridden a bit.

[@stevesalins7561]

Here is my update on the RDL seat. I put on 6k miles on it. After 6k I didn't feel the seat was comfortable for me. I am use to cushy cruiser seats. So what did I do? I ending up getting some moto-skiveez shorts, a gel pad from Walmart, and I still have my Airhawk. I really like the look of the seat and the workmanship was impeccable. The seat height was no problem at all. I decided on a whim (since Russell does adjustments) to call Russell and see if anything could be done about the comfort of the seat. The builder of my seat was Cole who was my size 5'9" and he was 10lbs lighter than me at 150 lbs. I asked him if anything could be done to make the seat more comfortable. He said he could make it better as part of their guarantee. I spent the $100 and shipped it back to them. I got the seat back about 2 weeks later shipped and paid for by Russell. I did a short ride that day about 20 miles. I found the wings on the seat to be smaller and a bit softer, but not as soft as I wanted. The next day I did a ride about 165 miles with a lot of twisties. The seat was incredible in the twisties. I felt like I was part of the bike. No slipping or movements at all! I was totally impressed. The seat is still not as soft as I like. I will wear the gel shorts because I really don't think they can make it any softer. I am OK with that. It hurts having a boney butt. If you are use to a cushy seat then the RDL may be too stiff for you. Since these seats are expensive and I can't just drop 1k + on every seat, I wish there was a way of trying out these seats before purchasing them. In the meantime, I am happy with my RDL seat. As a side note I sat on a bike with a Ultimate seat. It felt stiff as a board. Cruiseman, can you elaborate a bit more why your Ultimate seat was comfortable for you?

[@stephensmith1034]

I wonder if this 'Ultimate' lowers the center of gravity. I could go with an inch lower.

[@danarichardson9103]

FYI, there is a waterproofing spray that people use for waterproofing the seams of their tents. Maybe that would work on the seat.

[@gnrands50]

Thank you, Cruiseman, for another excellent review. Two quick questions. Was the Ultimate significantly higher or wider than stock? Also, how would you compare it to your Wingsoft modified seat? I know the Ultimate is much better than OEM, but what is your subjective opinion of the seat compared to the Wingsoft you already use. Which would you select if you had a long trip? Thanks again.

[@cruisemansgarage]

Not higher, but a bit wider. I would say from a comfort standpoint, they were pretty close for me. But then again, I can only ride for a couple of hours anyway because of my back before having to get off and stretch my legs.

[@danaszalajeski4416]

@@cruisemansgarage did you go with the mid-rider or tall boy?

[@clerissonmesquita]

Thank you so much for your invaluable information, highly appreciate it, keep it up the outstanding job, have a great day.

[@wflentge]

Thanks for the review. I have a 2019 Tour and do not have 4K miles on it yet and the stock seat already has a small split in the seam. Yes I will have it replaced via warranty, bit I do not want to have to do this every 4K miles of my 7 yr warrant. I have had other custom seats on a '97 and a '10 GW and they were in the $12-13K range and that was 8 yrs ago. So to me, the Price is not a con to me. I will investigate and decide if this is for me. I like John below, ride my bike daily and also take -2 week tours each year so the cost is OK in relation to the time I spend on it.

[@ostbob4108]

Have you or are you going to compared the Russel Day Long seat?

[@dlimms87]

Did the seat height change for the driver. Looks like a bit more for the passenger.

[@MikePizzolatt]

Hey Cruise man, i have an off topic question. I bought a used 2019 goldwing dct. It didn't come with the emergency start code. I have spoken to the seller and he doesn't know where the code is. Do you or anyone on this thread know where i can get this code for my bike. i've called 3 dealerships and no one has any idea. thanks in advance

[@roamingroads154]

Wow. The seat sounded great until you got to the price. I will stick with the Russell Day long. Gives me everything I am looking for.

[@dougmacpherson2610]

Bought one for my 2022 non tour model and could not tell any difference between this seat and the original one. Sent it back and was refunded promptly. Please note that custom trims will not be refunded in all cases.

[@ronhoughton6265]

Just traded my 2007 GL1800 for a 2020. I removed my Ultimate seat and it is for sale. I ride 10 hour days and lost OEM burn. I’m ordering another for the new bike. I spayed Camp Dry on all the seams. I ride in the rain continuously without rain covering the seats. I live in S. Florida. Inspecting my seat after removal, everything appeared as new as the day it was installed. I’m a very satisfied Ultimate customer.

[@TheUltimateSeats]

Thanks, Ron.

[@madogblue]

Not waterproof!!! Had the same issue with my Corbin. It's very silly for a touring bike

[@nicholasjheinz7461]

Its a shame Honda chose to cheapen the Goldwing forcing buyers to upgrade the seat on what is supposed to be a premium brand. Shame on Honda!

[@cruisemansgarage]

Honestly, some people have no issues with the OEM seat.

[@nicholasjheinz7461]

@@cruisemansgarage Unfortunately its not just the seat. Major issues with suspension as well exposed by Traxxion Dynamics.

[@cruisemansgarage]

@@nicholasjheinz7461 Sorry, but I LOVE the suspension. FAR superior to my previous Goldwings.

[@nicholasjheinz7461]

@@cruisemansgarage Its safe to say you are the only owner to say that.

[@DoRC]

Not to be nitpicky but if someone sends you something for free they have sponsored the video by default.

[@jjustice2848]

I bought an Ultimate seat for my GL1500 and I love it. I have had it 2 years and I am very pleased with my purchase.

[@terry4343]

Chris, would like to hear your thoughts on the Corbin Saddle for the 2018+

[@usnpilot203]

Thank you Cruiseman for this review. Ultimate started out making seats for the Valkyrie. I have a 2001 tourer and have had my Ultimate Seat for 15+ years now and it is still in excellent condition. There are days where I have logged 500-700 miles in the saddle with no complaints. Just picked up my 2019 Goldwing Tourer DCT and like the Valkyrie the OEM seat is horrible. After 90 minutes I ready to start walking. Your Pro-Con list is correct. The back rest is terrific, and I would not consider buying this seat without it. Yes, rain covers are needed, but only take a few minutes to put on. I used the rain covers and my Valkyrie seat is still in great condition. Yes, they are expensive, but if you plan on keeping you bike for many years and do some serious touring, the cost per year vs. the comfort you will enjoy more than justifies the expense. I will be ordering my Goldwing seat tomorrow.

[@TheUltimateSeats]

Thanks, Steve. We appreciate it!

[@busin4fun]

I took your advice got wing soft upgrade I use my bike for work on it up to 10 hours some days it helped a lot but I still have sore butt also with back problems. Thought this might help until you said it’s not waterproof I have to ride in rain a lot do not always have time to stop while on escort to cover up so it’s out. I bought a road sofa it was not much better than own not better than wing soft either thanks for all you videos

[@TheUltimateSeats]

Our premium marine grade vinyl is completely waterproof. Also, we also use a mold prohibitor in our memory foam. Additionally, when rain appears suddenly - while you are riding - you are covering the stitch lines - so no issue there.

[@tedshuster7294]

I would like to how the Ultimate seat compares to the Russell day long, I have been using the Russell day long on my Honda ST1300 and I rode 1530 miles miles in 21 i/2 hours for the Burner Gold from the Ironbutt Association. I stop for gas every 280 miles. when I arrived in Norman OK, I didn't have a sore butt but my neck and shoulders were very stiff.

[@quintriggins6557]

Wingsoft vs Ultimate? Lot of difference in cost.

[@RobertLeeLewisThe2nd]

Lack of waterproofing is a deal breaker. $1800 for a seat that will start molding on the inside after your first ride in the rain?

[@AmerSheikh]

love the ultimate review...been waiting for it for a long time!

[@cruisemansgarage]

It is a beautiful, comfortable seat.

[@mattcaradonna5437]

Chris, the real question is, is the Ultimate still on your bike? i.e. did you like it enough to keep it/pay for it? Not sure how things work when a vendor sends you something cost free to test and review. Is it like, here ya go? Yours to keep? Or is it more like, "please review and if you want to keep it we'll give you a deep discount or just send it back?" I just put my order in for the seat (your review had a lot to do with it), I'm just curious as to whether this seat is now part of your setup. Just like the Garmin XT you reviewed, where I think you have now kept that as part of your setup because you liked it better than the original zumo you added to the bike. Again, just curious.

[@silveredition921]

Nailed it cruisman have 2012 goldwing with ultimate seat black with red inlay and back rest with heat top notch quality very comfortable 50k miles ride all day no problem also have 2018 goldwing stock seat 45 minutes have to stop and get off just installed ultimate seat full in lay drivers back rest with heat hope it’s as comfortable as my 2012 wing also had Yamaha Roadstar with mustang seat back rest did not like and changed to ultimate seat with back rest and loved it not sure how they make so comfortable and the back rest is in the perfect spot can’t be happier with ultimate seats never used the rain cover though I just spray on the Honda polish on them seams to seal them up a bit have not tried it I have heard some people used the water proofing spray that you put on a camping tent to seal them up

[@TheUltimateSeats]

Thanks silveredition921

[@truck160xxiicentury6]

Ultimate seats is it okay to spray the seat down with water repellent

[@truck160xxiicentury6]

And another question is why don't you make the seat water resistant or waterproof I know in today's times as possible

[@genelemke]

How come you don't have this seat on your goldwing anymore? I saw a new video released like 4 month ago where you went and met some dude on a red goldwing and he had the corbin fire and ice seat on his bike and when you went to your bike you had the wingsoft seat on. Why? Also any reviews on the fire and ice seat yet?

[@jameshine7840]

Cruiseman have you ever heard of Hartco Internaional custom seats? If you have do you have a comment on them, likes or dislikes? They are kinda pricey, I have a 2019 DCT TOUR GOLD WING and it’s about $ 1500.

[@lance3613]

My stock seat ripped on on my 2018 on the seam behind the butt. Getting a new one via extended warranty. Mine was modified by WingSoft and i really liked it, but thought i might get an aftermarket seat instead of upgrading my new seat again by WingSoft. Is there a brand you would recommend? I know you liked the Ultimate.

[@mikespicer2810]

Thanks for a great review Cruiseman. I may have to try this seat.

[@bobgreen9253]

Just had he Ultimate seat installed by Ultimate on my 2021 and very unhappy. They screwed up the install. The two screws at the front was the only thing holding the seat on. The fit to the bike is bad. The pan is rubbing against something under the seat. Haven't found out what yet. The back of the seat rubs against the back speakers, so the rain cover can't be installed. And the midrider seems to move you forward. Made for a very uncomfortable 1000 mile ride home. the 2018 seat may be different but I can't recommend the 2021 version.

[@mikejacks1939]

I think the seat looks tons better the original OEM seat although unless you have serious issues with the OEM, ( recent survey on one group put it at approx 55/45 % ) it is way to expensive. Quality question, you said the workmanship is second to none but I seem to have noticed a couple of creases in the material a particularly bad one in the side of the seat above the helmet lock. Is this a fault or a trick of the eye/camera angle. If I had paid that sort of money for the seat I would not be happy with that at all

[@damiansgaragebuilds7663]

Im perturbed with Ultimate Seats their website says they have many other fabrics to choose from but there are no samples on the site ….Chris asked me to find the color I want thats when i said wtf to myself…..I asked for silver/gray colors to match my GW accent youd think they would give us what they have in stovk or can get … I can hear her telling me if i sent a sample fabric “ we cant get that color “ Gemini aluminum is not it! Maybe Corbin has a better web page.

[@bobbass9093]

Thanks for the timely review Chris. On my 08 Goldwing I had a Hartco custom seat on it and absolutely loved it, it changed the whole bike, now on my 2018 Goldwing the stock seat is worse than prior years stock seats, so I've been looking at all options on replacing the seat,the Ultimate seat has a few mixed reviews and after talking to another seat manufacturer said the ultimate seats foam will compress over time and cause back pains to come back, being that came from another manufacturer I'd take that with a grain of salt. I decided to go with the Russel day long, rebuild my production date is in June so till then I'll be keeping my fingers crossed that this was the right decision

[@cruisemansgarage]

Good to do research, but not sure I would rely on a competitor's opinion of the Ultimate seat. Better to talk to those who have owned/ridden on them.

[@ogadventures2245]

What set do you currently have on your goldwing now?

[@Tmaranatha13]

@ Criuseman Your review was right on. I have had them on many of my bikes .I personally love Ultimate seats mainly for the comfort and looks. My wife and I went on a 6,000 mile trip out west averaging 500 miles a day, and a couple of times 18-24 hours straight with no butt burn. This was on a 2008 Goldwing. I think we're close in height as I'm 6'3. I just bought a 2023 DCRT Tour, and ordered my favorite seats (Ultimate) and had to return them. They were so comfortable But they set my knees up too high and felt like my knees were gonna hit my chin. My knees were not comfortable, especially my right as I had surgery back in the spring. So needless to say I am searching for a seat. Thanks for all your videos, you have been a great help!!

[@Gregs_World]

another great video i understand the pricing.... i've had corbins on many bikes and you have to pay for quality HOWEVER..... NOT WATERPROOF..... that's ABSURD..... this is a motorcycle seat forget all those options.... give me a seat that won't ROT in the FLORIDA humidity, let alone rain horrible disappointing you are awesome... thanks for the education, as always

[@michaelmurphy3357]

How can I get in touch with Ultimate Seat people?

[@RH-qf6wv]

I left a comment about how the Wing Soft didn't solve all of my discomfort unfortunately I had to sell my 2018 Goldwing because of the seat. I loved the bike, but the seat was the deal breaker.

[@a.d.c7941]

Id have to say the only thing that would keep me from buying this seat is its not waterproof. For that type of money, It really should be. Great review as always cruise man. U r the best.

[@cruisemansgarage]

As I have said previously, I am not aware of a custom seat that's waterproof. If the seat has stitching, then water can get through.

[@a.d.c7941]

Cruiseman's Garage Great point. The oem seat does not state whether or not rain will damage it?

[@leadfooty]

No aftermarket seat is waterproof, that I'm aware of. Nothing that has real stitching can be waterproof. Factory seats look like they are sewn together but they are vinyl welded, which is why they are waterproof. Also why their seat covers don't last as long. I've been riding an Ultimate Seat for 5 years and I do put the rain cover on if the bike will be sitting in the rain or if I know I'll be riding in the rain for.long time, but other than that, I don't worry too much. Lastly, the passenger backrests definitely come with a cover, and it's really easy to put on with the right technique

[@randallparr135]

I enjoyed your Wingsoft seat video. Did it end up not working for you?

[@cruisemansgarage]

I still have the WingSoft, love it too. Probably will have to sell one of them. I will likely get more seats in here to review and cannot store all of them!

[@bgm1911]

When mentioning the backrest, you should have said what your height is. The backrest may not be a plus if the non-adjustable-ness doesn't hit the back of a shorter rider. Not being waterproof is a deal breaker. Dealing with a cover on a seat that costs $1800 is just absurd; that $5 cover is an afterthought because the manufacturer failed in the seat design.

[@jameshine7840]

Hello my name is Jim. I’m looking at getting a new seat for my 2019 DCT tour. Have you heard anything about Hartco International custom seats? If you have could you please give me some feed back. Thank You!

[@lindateasley5025]

After much research, including your video review, we bought an Ultimate Tall Boy seat. After several thousand miles and many months we can still say we are very happy with the seat. I do have one question for you. When you mounted the passenger backrest on your bike did you notice any gap in the armrest fitting to the trunk lid. Ours has a little bit of play in it in that if you push straight down on the armrest from a standing position the armrest moves downward like it is not fully supported on the trunk lid. Did you happen to notice this? I have removed and remounted the backrest several times with no change in this issue. Thanks in advance for your help.

[@deweysellers1452]

i wish you went over how it or if it changed the ride height

[@danhaak1347]

Cruiseman, I have noticed on your recent videos you no longer have the Ultimate seat on your bike and have gone back to the stock seat. Any reason why you have done that. I am thinking of ordering an Ultimate seat and was wondering why you did that. Thanks

[@alainfloutier6466]

Hello Chris After your review, I bought an Ultimate seat for my 2021 GW DCT Tour with Airbag. Before I buy, Ultimate told me their heated seat was exactly the same as the OEM one. Very happy with the comfort of both the seat and the driver backrest. However, after a while, I noticed that I lost the « start/stop » feature of the bike. After a few checks at the Honda dealer, I realized that the Ultimate seat was the reason(!) of this missing feature because it DOES NOT contain the DRIVER SENSOR used by the « start and stop » function. I can leave with that, but wonder if this driver sensor is used or not to arm or disarm the Airbag…much more problematic…!! Specially considering the price I paid for the seat and driver backrest only:1600€. The heated (I hope!) passenger backrest is not yet available due to the larger trunk of the 2021 model. I have a discussion open with Ultimate in order to know how they can solve this driver sensor issue, but no answer yet. Is this specific to the 2021 GW, or did you have other 2018+ customers raising this issue? Thank you for your feedback.

[@cruisemansgarage]

THAT is a VERY good question and one that needs to be dealt with.

[@alainfloutier6466]

@@cruisemansgarage Thanks Chris. Do you have other feedbacks from Ultimate seat owners about this issue? Do you have special relationship with Ultimate seat to question them about that? Thank you for your help.

[@cruisemansgarage]

@@alainfloutier6466 I do not have a special relationship, but I do have a contact and will reach out to see what they have to say about it.

[@alainfloutier6466]

@@cruisemansgarage Thanks Chris :):)

[@alainfloutier6466]

Hello Chris, I just received the final answer regarding this issue with the ULTIMATE seat from Dave Frank, VP of operations. NO WAY to have the driver sensor installed as the OEM one, resulting in the definitive loss of the Start and Stop function of the GOLDWING 2021 (or any model having the Start and Stop function). I find odd that a company like ULTIMATE is misleading the prospects willing to buy a seat and saying their seats are 100% compatible with the OEM ones, especially at this price tag. I am surprised that other customers do not complain about that....

[@Fireball1800]

Cruseman. Update please. Are you still using the ultimate seat? How does it compare to the wing soft? Did you get the tall boy ultimate? I noticed that the stock seat has plastic under the cover. Does the ultimate retain that for water proofing the foam?

[@jamespittman204]

Never used the rain covers on my 09. Seat has been in plenty of rain without any problems. 800 and 900+ mile days. 6’5”, 36” inseam, Ultimate King was the only seat for me.

[@JUFFAIR101]

Looks like a bit complicated to remove the seat and passenger seat with the passenger backrest, I don’t have the tools for it and I believe i will brake it , can I order a new seat and passenger seat with the backrest from ultimate seat?

[@gradybrowniii3891]

I imagine that by the end of this video, people fell into one of 2 categories... 1) Those that don't know if they want to spend that kind of money for a seat (as great as it may be) and 2) Those that know they don't have that kind of money to spend on any item, let alone a seat. I am NOT in category 1, lol. Godspeed

[@terryfulmer6967]

cruiseman do you prefer the wingsoft seat you have rebuilt or the ultimate seat when riding your 2018 goldwing

[@ronmiller4556]

How about a Russell Day-Long seat? Can you compare Ultimate with them?

[@leonardlipton9874]

Very thorough and valuable review

[@michaelsloane1034]

The one thing you did not mention in your video which I really thought you should have mention for a more in depth review did you think the ultimate seat was more comfortable and better than your remodeled seat from wing soft

[@harryhowell5644]

Sat on a friend's HD that had an ultimate seat. He was bragging about how much it cost and how comfortable it was. He offered me to try it out and my first impression was it was hard as a rock. But I just humored him.

[@JimmieJohn]

why don't you just review the comfort, style and rideabilry firsrt? then I can decide if I want to see how to install?

[@bernarddeschamps8538]

The non waterproof would be a great concern up north. We do have a lot of rain. Kind of surprising they have not thought of that for the price tag

[@TheUltimateSeats]

Hi Bernard, Any aftermarket seat that has stitching is not waterproof. All of the aftermarket manufacturers sell rain covers. However, ours are the only ones that are custom fit for each seat we offer - and less like a shower cap (universal fit).

[@robertf3340]

@@TheUltimateSeats So is washing the bike a concern in regards to getting the seat wet? I mean how much water can the seat take before saturation causes a problem? Can you get some water on it?

[@Fireball1800]

@@TheUltimateSeats do you retain/add the waterproof plastic under the cover like the OEM to protect the foam from water saturation? Or can you just install the rain cover between the inner foam and outside cover to prevent foam from soaking up water. Stitches can absorb some water that’s fine if you have some water stripes on pants but lots of water soaking into foam can be a long lasting problem... also waterproof tape under cover on the seams could be an option. Just thinking out of the box.