The ULTIMATE SERVO TOOLS!! Cool Tech Ep8

[@ckleanth]

I'm fortunate to know the guys behind the RC Light Systems products and I do own quite a few of their products. I second they are very well made, and extremely well thought bits of kit. (and there is more to come)

[@MartinPickering-PickeringRC]

Top bunch of guys!

[@tdogrc]

I have their 3S charge board and it’s brilliant! I use it all the time and it makes charging so easy. Just need them to bring out 4S and 6S versions now! Great video thanks Martin 👍

[@MartinPickering-PickeringRC]

Totally agree! I asked for the same, maybe we will both get lucky!

[@oskargothaus2474]

Beautiful Video!

[@MartinPickering-PickeringRC]

Thank you very much!

[@neilgillies6943]

Lol, I wondered what you were talking about "1500 use" - uS - microseconds 😊😊 Nicer bit of kit than the elder variety 😄

[@MartinPickering-PickeringRC]

Yeah, debated how to do that, figured, make it easy, read it as people see it lol

[@LeeEgan]

The little ISDT chargers are great Martin, I use those for field charging and my big Revolectrix chargers at home :-)

[@MartinPickering-PickeringRC]

Keep hearing that, so will check them out, thanks!

[@georgewatts9361]

I will check out their website Martin.

[@MartinPickering-PickeringRC]

Cool!

[@hadjnabil4811]

thank you martin

[@MartinPickering-PickeringRC]

Thanks!

[@dynodom4677]

Great Tool ! Great Presentation! Pity that the Screen is sooo tiny. It would have been easy to fit a display with better visibility and larger size.

[@SimonFredrikLaugsand]

Can this be used to set my Hitec 7950th servo arm to 90° center without using subtrim on the radio?

[@MartinPickering-PickeringRC]

No, it is only a momentary tester, if you need to program you would need the Hitec programmer

[@peterzingler6221]

Hello Martin very nice video. In your opinion whats the best sevvo manufactory? I'm building a 2m flying wing at the moment and since it only uses 2 servos I might as well go for the best. Since I'm new in the hobby I don't really know which are good tho :(

[@MartinPickering-PickeringRC]

Hi Peter, there are many options, depends if it is an electric wing, a turbine wing, a combat wing... Personally I use MKS as I feel they are the best, specific servo will depend on specific use... (possibly going in your case for speed over torque)

[@The727Flyer]

Hola Martín, yo uso el Icharger 3010B y es una maravilla. Es pequeño y carga hasta 10S a 30A de máxima.......siempre que la fuente sea capaz de darle 30A claro. También tengo el Icharger 306B que es igual pero sólo hasta 6S.

[@MartinPickering-PickeringRC]

Gracias! Le doy un vistazo!! =)

[@frankleonard6291]

Will this work on all servo ??, do you leave it hook up ??

[@MartinPickering-PickeringRC]

Will work with any servo yes. It is intended as setup tool, so dont leave it inside the model no

[@Domowoi2]

I have a Hota D6 Pro but check out the ISDT stuff

[@MartinPickering-PickeringRC]

Will do, thanks!

[@martinscheidegger8107]

Hi nice channel

[@MartinPickering-PickeringRC]

Hey, thanks!!

[@roymills415]

Hey Martin love your videos, I have a question you might shed some light on regarding servo jitters. I’m running MKS HBL 550s all around on a 33 percent plane. The elevator servos are jittering quite a bit especially around center position. Any thoughts? He leads are about 36” long. I was thinking maybe about 25 percent expo might help? However I usually don’t fly with any expo. Thanks!

[@MartinPickering-PickeringRC]

Hi mate, sounds like two different issues. Jitters, and overly responsive elevator? Which is it? =)

[@roymills415]

@@MartinPickering-PickeringRC So, very jittery on elevator especially around center position, might be a bad servo, the MKS are very strong but loud. I don’t care about the noise but the jitter is significant, almost like 3 to 4 mm uncommanded movement throughout a 20 degree range. I can use this servo on unimportant position like choke if this is the problem.

[@MartinPickering-PickeringRC]

@@roymills415 can you try plugging one directly into one of the outputs on your powerbox and check if they are the same? Also what voltage are you running them at?

[@roymills415]

@@MartinPickering-PickeringRC Jeti R12, R5, dual path mode with 5200 8.2V receiver packs, parallel, dual redundancy on flight packs. I’ll let you know what I find, will also check separate output pin (receiver port) on Rex12. Thanks

[@roymills415]

@@MartinPickering-PickeringRC So latest attempts, tried three different ports on RX, same jitter, tried direct input servo to receiver, same jitter. There’s no slop on control surface, solid hinged line, solid 4-40 turnbuckle, steel arms etc. Going to swap servo out see if I can duplicate problem. Appears 550 can handle the long lead to tail no problem.

[@jurgenblume5179]

Great video as always! Thanks for sharing. Unfortunately, I cannot find the setup tool here - www.rclightsystems.com May I ask you to point out the correct URL where this part can be purchased? Thanks a lot in advance for your help.

[@tomwood2097]

Hi Jürgen, we had a small delay in getting the Setup Tool live on the website at the same time as the video release. Here's the link: www.rclightsystems.com/product-page/servo-tester

[@MartinPickering-PickeringRC]

Great customer service there Tom!

[@jurgenblume5179]

@@tomwood2097 Thanks a lot for pointing this out. Message sent.

[@arielalvarez76]

first!

[@MartinPickering-PickeringRC]

Nº1!

[@smattext]

seriously you plug this servo setup tool I go to the web site and the first thing i see is its out of stock not impressed!!

[@tomwood2097]

Apologies Scott! These sold much quicker than we expected, should be more available by the weekend!

[@MartinPickering-PickeringRC]

Great news Tom!