The Weird Green Bay Packers Boat?! DEERC DE95 brushless RC jet boat

[@scaleworksRC]

Go Packers?!🤔😆Good review with some down to earth chaps 👍I learned a lot about these little boats since finding your channel

[@grrfy]

cheers fellow! you are getting that wlt dialed in now ,

[@scaleworksRC]

@@grrfy Thanks! Pretty happy with it now.. I'm just not sure if I want to invest more into it and upgrade the motor 👍

[@theminiatureconstructionco4556]

Hello. Yes I've been testing loads of boats recently! Sort of got a bit obsessed :). I had a load of control issues with my 915 so it was returned. Although I wouldn't mind trying another one. I think you should when the time comes upgrade the motor, as you can make them silly fast!!!!

[@scaleworksRC]

@@theminiatureconstructionco4556 Yep, that 915 I almost passed on completely after seeing the issues you had, but I figured I'd take a chance. And if it was bad, I'd just return it.. but it was on sale for 40% off, so I gave it a go. The one I got was the revised version '915-A' ..so it had some updated bits, but slower than the original. 👍

[@carloshnunez]

Very good review looks like the brushed is the way to go 🔵🔵🔵🙂🙂🙂👍👍👍🔵🔵🔵

[@grrfy]

A very surprising result, brushed is alo self righting and has a bit of reverse.

[@theminiatureconstructionco4556]

Yep we were very surprised when we tested it that it really wasn't any better! Save your money and buy the brushed!!

[@rcplaytime]

wow that's quick 👌👍love it 👍👍😀

[@theminiatureconstructionco4556]

The problem is the brushed version is just as fast. So its just not worth it!

[@DENSUTUBE2008]

Did the brushless ever flip over and was stuck upside down? Where I live they are only $10 difference. Self righting is a benefit if its does flip upside down.

[@theminiatureconstructionco4556]

@@DENSUTUBE2008 they are pretty stable if I remember correctly. Although I don't think it has self righting.

[@kolasaRC]

this video made me sub. good job and cheers❤

[@theminiatureconstructionco4556]

Thank you very much and welcome aboard!!

[@RustyShakleford1]

Would the thrust be better with a proppeler version? Instead of the jet i want to use it for oulling a small gill net

[@theminiatureconstructionco4556]

I'm not sure. There is decent amount out of the back of one of these jet boats. No prop to foul in your net either?

[@RustyShakleford1]

@theminiatureconstructionco4556 yea thats what I was thinking the upside of no prop to foul but I'm not sure if I can get replacement impeller for the jet if I suck up sand and damage it. How much thrust would you estimate the jet to produce? 1lb or more?

[@theminiatureconstructionco4556]

@@RustyShakleford1 I think AliExpress may do spares. or buy the really cheap Tyxin version for a parts donor?

[@theminiatureconstructionco4556]

@@RustyShakleford1 not sure about the pull but its decent for that size boat.

[@RustyShakleford1]

I have 15ah 33140 cells i think theyre called theyre lifepo4 15ah gonna see if they fit in there without sinking it

[@theminiatureconstructionco4556]

let me know. 😀

[@RustyShakleford1]

@theminiatureconstructionco4556 i will do! I found larger propellers i could also swap in

[@theminiatureconstructionco4556]

@@RustyShakleford1 what in the pump housing?

[@RustyShakleford1]

@theminiatureconstructionco4556 yea there was one with a different pitch for the impeller. I also found a large 55mm propeller metal for direct drive propeller shaft motor

[@theminiatureconstructionco4556]

@RustyShakleford1 oh OK. 👍

[@IsaacSchultz-lz8jc]

There is a jet boat you should look at it’s the Bancroft jet power sprint boat, it’s a 25inch brushless jet boat for a decent price

[@theminiatureconstructionco4556]

Thank you for the tip. I'll take a look. :)

[@IsaacSchultz-lz8jc]

There are very few videos online about it it would be cool if someone would go in depth about the boat.

[@theminiatureconstructionco4556]

@@IsaacSchultz-lz8jc I would love to but its a touch spendy.

[@IsaacSchultz-lz8jc]

Then try the tyxin 768 a 3s brushless boat more on the budget side.

[@FishingFosterr]

I’m getting the brushed one is brushless better or not for the price

[@grrfy]

Brushed is the way when we compared them we were very surprised, the brushed also has self righting and a small amount of reverse thrust unlike the brushless.

[@theminiatureconstructionco4556]

Hello! Get the brushed!!!! Its cheaper, just as quick, has a nicer transmitter, handles as well if not better, has a bit of reverse and has self righting like my colleague mentioned. In this case there is no advantage too buying the brushless, unless you like wasting money!!!!!

[@FishingFosterr]

@@theminiatureconstructionco4556 thank you for the honest review I will get the brushed

[@theminiatureconstructionco4556]

@@FishingFosterr I don't think you will be disappointed. 👍

[@RustyShakleford1]

I think the brushless is better on batteries tho

[@theminiatureconstructionco4556]

Yeah they are normally a little more frugal.

[@IsaacSchultz-lz8jc]

I think it is jut a tiny brushless system is for advertising

[@theminiatureconstructionco4556]

Hello. Your possibly right. Like Grrfy mentioned in the video, the 15A esc probably isn't up to much!

[@IsaacSchultz-lz8jc]

Maybe you should upgrade the Tyxin to brushless and then compare it and try to keep it in the same price range as the packer boat.

[@grrfy]

@@IsaacSchultz-lz8jc great minds think alike! stay tuned for another thrilling episode coming soon lol

[@IsaacSchultz-lz8jc]

I will

[@theminiatureconstructionco4556]

@@IsaacSchultz-lz8jc that's a good idea 💡