How to identify ignition switch terminals

[@MrCurative]

Brief and to the point, without musical distraction. Good instructional. Thanks for sharing.

[@TheAbJGarage]

Glad you enjoyed it!

[@knutelindstrom3716]

Thank you! I’m not very good at electrical stuff, but I like how you explain everything & map it out! You must be a teacher! If not, then you should be, because you have a good way of teaching!

[@LoiAquino-pj9zg]

Thanks idol

[@batkovesko]

The best explanation of the ignition switch terminals with chart. I repair today my car because of your explanation and had ability to identify the problem in my switch. Perfect man!

[@TheAbJGarage]

Glad it helped!

[@MrRainbowrooster]

One of the best made videos on you Tube. Excellent teaching video. Thank You

[@TheAbJGarage]

Wow, thanks!

[@melvis2017]

Thanks allot for sharing this with us appreciations and you make understand and save the money for the electrician🤣🇩🇰👌👍

[@TheAbJGarage]

My pleasure! Glad it helped!

[@khashayar110]

The best explanation I've ever seen to be honest. Very clearly explained. Thanks a lot. It was very useful for me. Thansk. 👏👏👏👍👍👍

[@TheAbJGarage]

Am glad it was helpful! Thank you very much for the encouraging comment!

[@raymondmpisane9798]

Best explanation. I became an auto electrician in 30 minutes. Please go coil pack ' terminals

[@tommyandtammy1]

Best explination on youtube, thanks and God Bless.

[@TheAbJGarage]

Wow, thank you! Glad it was helpful!

[@jockstewart8793]

Rewiring an old JCB - this is a very clear and useful video - thank you!

[@TheAbJGarage]

Glad it helped! Thank you very much!

[@charlesreid2141]

Looking for info on how to wire my excavator and found this to be extremely useful. Thanks

[@biniyebi]

Good Job. Very simplified explanation. Thank you!!

[@snhongo1]

👏👏👏👏👏 wonderful explanation....you are very wise Sir....

[@TheAbJGarage]

Thanks and welcome

[@someonewhotakeseverythingt6755]

This some great stuff man, you're helping a lot of people 👍

[@TheAbJGarage]

Glad you think so! Thank you very much!

[@jzbrynn]

I learned something after this video, great helpful.

[@TheAbJGarage]

Am glad you found it helpful.

[@paulabetts-z1d]

Excellent explanation. ✔️💯%👍

[@TheAbJGarage]

Glad you liked it!

[@objuan6]

good video, good info, still soaking into my brain, I think your technique is going to affect my technique, somehow. thank you. J

[@TheAbJGarage]

Glad it was helpful! Thank you very much for your wonderful encouragement!

[@erniedmd1957]

Best tutorial I have come across

[@TheAbJGarage]

Thank you very much! That is heartwarming encouragement!

[@kirosg.egziabher5071]

clear and supportive. but i have question what is the fifth terminal on the switch?

[@3500fredo]

Thanks brother needed to find this video a while back

[@TheAbJGarage]

Glad I could help!

[@kijetikimavi]

Top Ethiopian engineer

[@Carrington_Event]

Thank you for video... this is the video i have been looking for

[@TheAbJGarage]

Glad it was helpful!

[@cowdough94]

I have a question though. I have a 1988 Chrysler conquest and the ignition is trashed. I just want to put a toggle switch in place of the key and then hook up a push button start. I e looked at the circuit diagrams and I can't figure it with all the inhibitor switches and all that stuff...I'm not sure if something's not messed up in the fusible links and the signal wire for my starter isn't getting power...I really don't know...I can work on mechanical stuff all day but electrical stuff is super tough

[@TheAbJGarage]

Dear! Start from the starter motor and follow the line back to the cabin. That line should be given battery voltage for the starter to function.

[@balazstoth1738]

Hello, I have a question, I have in the car a Water tamreture clock, which one I can choese red or green? THANKS A LOT

[@abatyezeb6209]

its good keep it up

[@simbarashemangandu9176]

Very straight forward 🙏🏽

[@TheAbJGarage]

Thank you very much!

[@MrMfpd]

Clear repeatable. Will use this tomorrow

[@TheAbJGarage]

Glad to hear that! Thank you very much!

[@mrfrank5757]

Nicely done.

[@TheAbJGarage]

Thanks for the visit

[@LoiAquino-pj9zg]

Nice good one idol

[@TheAbJGarage]

Thanks!

[@WestRidgeFARM]

Thanks this was very helpful 😀

[@TheAbJGarage]

Glad it was helpful!

[@StephenPudumo]

Thank.for.this.long.awaited.turtoriul.learson.our.oñe.and,only.loviñg.channel.best.global..from.south.africa😂😂😂😂

[@TheAbJGarage]

Pleasure to have here on our channel!

[@baljindersinghkhalsasingh2935]

V good😊

[@TheAbJGarage]

Thanks 😊

[@RickyEats]

Hi bro ! My key switch has a voltmeter , i want to test the ignition key. My key switch has 3 wires ; Red Black Green! If I want to test for continuity where do I place the red and black prones from my voltmeter to the switch. I was doing black on black , red on black and turning key on.

[@earthenergyhex]

wow, thanks!! very helpfull

[@TheAbJGarage]

You're welcome!

[@chandanajayawardena3803]

Good explanation thanks

[@TheAbJGarage]

Thank you very much!

[@vajaynunthandass676]

Excellent. Thanks

[@TheAbJGarage]

Glad you liked it!

[@georgemakaya2408]

Well explained ,on my ignition switch on START i get continuity on all wires,Is the ignition faulty?

[@TheAbJGarage]

Continty should be all wires except the accessory should have continuty

[@cowdough94]

that is so cool! I've never thought about a chart like this. genius! omg I feel so stupid

[@SelectTaxi24]

❤Wow nice, but what I do if I have 6 pins and the new ignition have just 4 🥺?

[@TheAbJGarage]

You better identify the pins first to see their connectivity. Some of the pins might be repeated pairs. Some ignition switches have two IG terminal and two BATTERY terminals. If the terminals are not repeated, you can find which one best suits from the 4 terminals that are available on new ignition switches.

[@hermilitoburgo9592]

Why does the auxiliary come first before the off position seems wrong, it should come first. the off position and next auxiliary. because if you remove the key still working the auxiliary.

[@TheAbJGarage]

Yes! Some ignition keys have auxiliary before off. You can confirm this by checking for continuity. There is no continuity on OFF position, and also remember that on some keys, the ignition key can be removed from the cylinder both on OFF and Accessory position. On those cars you can still listen to the radio, with the key removed to open the fuel tank!

[@luckyanmsn]

my car dont have 2 ignation wire like ignation 1 and 2 . but i want install a stop start kit which one has that 2 wire . what can i do ? anyone help me ?

[@dreamfixtechnologies5488]

Thanks for your explanation. please where is the off position connected?

[@TheAbJGarage]

Dear! Thank you very much for commenting on our video. And to answer your question, OFF is actually a key position where battery power to all electrical loads is disconnected. Off is therefore not a terminal to be connected. The common terminals we have on ignition switch are: Battery, accessory, ignition, and start. The different ignition key positions are: OFF, ACC, ON, and ST.

[@hakeemsait7231]

Nice Bro..

[@tommyfox4444444]

excellent

[@mafosa8519]

"sweet!' thank you!! DALLAS TX

[@TheAbJGarage]

My pleasure!

[@alm4737]

Excellent. Thankyou

[@TheAbJGarage]

You are most welcome dear!!

[@Phavouriteinstallations]

Sir, how do I locate the ignition in the car

[@TheAbJGarage]

What do you mean by "ignition?' Do you mean ignition key? Ignition coil?

[@Phavouriteinstallations]

@@TheAbJGarage I mean the cable that run into the car ignition. How to access them

[@cezmiince4983]

Thanks dear frh

[@amodyasiriwardana3052]

Thank you bro

[@TheAbJGarage]

Welcome

[@utomudostephen7432]

What about the last terminal on the key. ?

[@TheAbJGarage]

Dear!! Thank you for your visit! Regarding the additional terminal on the ignition key, it is actually a repeated terminal from the four terminals. Some ignition keys have more than one ig terminal or battery terminal. On some ignition keys however, there are additional terminals for glow plug operation which is spring loaded just like the start terminals. but it is operated in opposite direction to the start position, i.e. counter clockwise from the off position.

[@jacobphiri3445]

What of ground(negative)

[@TheAbJGarage]

The negative is not brought to the ignition switch. It rather goes to the other side of the electrical loads, ignition switch controls the positive or power supply side. It distributes battery positive power to the different circuits.

[@RickyEats]

Hwy i have a question?

[@tesfahungetahunargachew4328]

Pls about hazard switch with internal switch parts

[@TheAbJGarage]

coming soon! Dear!

[@kumaalemayehu8197]

Good

[@TheAbJGarage]

Thanks

[@yakobwakjera2102]

Love it tx

[@TheAbJGarage]

So glad!

[@derarak]

nice explained tnx

[@mandfmarine]

Excellent thank-you

[@michaelduran8392]

thank you

[@TheAbJGarage]

You're welcome!

[@Ranchready496]

👌👏🍻👍

[@muhammadzohaib8923]

❤

[@raykinsellas9089]

Thanks so much for the Video. Here is a Stupid question for you....When you are using your Voltmeter for checking the Continuity, where does the Electricity come From...that goes through the Wires? I have a Volt Meter but..have really no idea how to use it! LOL Is it the Voltmeter and its Nine Volt Battery, that is putting the electricity through the Wires? Second question...Why do they have to have those Stupid Symbols, on the Voltmeters......why not make them IDIOT Proof...and just right Continuity on the Voltmeter Gauge, instead of those Symbols that are Hard to even SEE. Grrrrrrrr Besides that......Great job on the Video! Cheers

[@haynlaskan9668]

Alligator clips.

[@TheAbJGarage]

I wish I used one!!

[@ethiotiktoket5902]

🤣🤣

[@ismaelsiwi9953]

Thanks very much

[@TheAbJGarage]

Most welcome!