How Expert Mechanic’s Repair Caterpillar Wheel Tandem and Change Seal Kit

[@troo_story]

Still waiting for the expert mechanics to turn up. Meantime, there are these guys.

[@WeLoveRankings]

me too.

[@kurtstovall1]

😄😄😄😄😄😄

[@minguyen-rl7sn]

@John Evans let them eat cake amiright

[@ralan5527]

@John Evans - The wheel was still on at that point, the tractor would not have come crashing down.

[@billthompson8182]

@R Alan lol. You willing to bet your life on it? This whole video is insanity.

[@igi2005555]

Механики от бога прям! Все в пыли , грязи, зачем то заменили кольца в мосту которые явно не протекали и были сухими, запихали их не смазав, острой отверткой. С такими мастерам техника будет ходить вечно (нет) . В общем лучше бы не залезали, дольше бы проработало...

[@user-hr1el7no8p]

Это на какой государства?

[@amateurxxx3798]

Я вообще подумал, что они тормозные накладки полезли менять)

[@offroadcaravanertraveler6176]

Дуо коны же поменяли, в чем проблема ?

[@igi2005555]

@@offroadcaravanertraveler6176 проблема в том, что кучу грязи в узел засунули при этом. И проблема в том, что следов того, что уплотнения протекали нет

[@Aspirant1984]

Ты прав! Работают,чтобы от клиентов был завал! Потому что там люди деляться на два типа,кто в мазуте,а кто с таким браслетом(когда он шестерню показывает) ему вообще п..хую,лишь бы работало,,а сколько ему тоже п..хую

[@MrSlim1959]

Fred and Barney could not have done it better.

[@NickandMildred]

Would I be right in thinking that this isn’t an approved Caterpillar Service Agent ?

[@theawesomeskills63]

These machanic's have only caterpillar's workshop even only repair ND restoration of caterpillars things

[@miketerry4972]

CAT could not do this unless they had forklift impact and 3 people working and 5 watching

[@raymondrose6641]

No these are factory trained technicians.

[@bread19742000]

They are of a different parent company 😂😂

[@davidpieratt]

Their experts at everything, all their titles to their videos say so

[@BCVS777]

These boys are just about to the limit of what can be done with strong backs and determination! Well done!

[@eddiemeeks7133]

Very true 👍

[@georgedoorley5628]

a place where men are men ........ females know their place........and sheep are nervous ......... a good fix with the barest of hand tools well done men be proud ........!

[@nietherniether7508]

The good thing is that safety is these guys first priority.

[@YMH420s]

Safety costs money

[@theawesomeskills63]

👍🌹

[@davidcousins5493]

@@YMH420s and life is cheap.

[@blazeykk]

9:20 Opening elements with chisel and hammer or other screwdriver is going to leave perfect surfaces to seal. 13:22 Like always dirt sand is the best place to storage components that need to work in clean environment and are sensitive for hard debris. 14:40 Clean it with a cloth. 14:45 blow all dust and sand from another part into it. 15:23 Scratch the sealing with screwdriver. 16:33 Oh, there is a bearing you blow dust and sand on. So - where is announced video with "Expert Mechanics"?

[@YMH420s]

Expert mechanic is a oxymoron

[@toinewitteveen6907]

@blazeykk you typing all this, get a life man go do something, instead of hating on people. Loser

[@blazeykk]

@@toinewitteveen6907 find loser on your family. Ask your father. I am technician and see what is done wrong. Clear?

[@crisp619]

It’s about their determination and ability to do this work despite of a complete lack of resources and facilities. Everyone is not as privileged as you might be.

[@blazeykk]

@@crisp619 No! It is about learning, developing and evolution. They have internet, they have money, they can see how it looks in professional shops and they DON'T learn, don't adopt good standards. They work in shitty way like their parents and grandparents. And their kids will also work this way. Low standards and they don't have will to improve it.

[@tannerbass7146]

Wow that off angle jack really makes me nervous. But hey props to them for doing what they can with what they have.

[@victorrobison5069]

I love the idea that anywhere they can fit a jack is a proper lifting point.

[@theawesomeskills63]

👍

[@martinswiney2192]

That scared me the most. If that thing comes down its gonna be fast and messy.

[@bigmike913]

I always poke my new seals with a flat blade during installation 😂

[@ralan5527]

Mike, your father and grand father probable did too.

[@jeremyscott6641]

The horn timing in the background was perfect cringe alert lol

[@blazeykk]

You should use needle or knife. Works much better.

[@royearl1094]

lol

[@rtp3962]

Somebody needs to change the oil on their work clothes!

[@tonyzanotto1691]

That's the sole purpose of this"repair" .

[@mikhailjan1927]

при таких условиях работы в агрегат просто обязана попасть пыль и песок. так что этот ремонт не на долго, скоро понадобится новый.

[@alexandrneberekutin1194]

Сальники отвёрткой, вообще высший бал маразма :) таких ремонтников к технике вообще подпускать нельзя. Им разве что навоз за ослами выгребать доверить можно, и то под контролем :)

[@PeocTaT1]

И он будет вечный

[@jimlong527]

For the tools they work with I must give these men much respect. We all should learn something from this video.

[@theawesomeskills63]

Thanks for comming on my video also thanks for your precious appreciation for these hardwork mechanics 😍visit again on my chanel for more interesting videos

[@ArthurDentZaphodBeeb]

Yes, we learn how not to make this repair. Sloppy, dirty work

[@Sean-bp6xb]

Way to go guys! Watching from Ontario Canada 🇨🇦 🎉

[@WeirD_StupiD_VideoS_]

Притирочный песок как всегда бонусом)😆

[@logicalerror9205]

А главное что эти парни знают все о технике безопасности 😂

[@Андрей1883]

Сальник острой отверткой запихивают, герметик на масло намазывают, редуктор в песок бросают - так держать))))))

[@ИванЛоренгель]

так и сальник целый был,еще бы отьездил а новый побежит через неделю

[@PeocTaT1]

Это вам не это!

[@ДжастинТимберлейк-ф2р]

Забавные ребята рядом стоит экскаватор, но давайте использовать семи тонный домкрат .

[@PeocTaT1]

Могли и клинешком поднять

[@kevindunlap5525]

The boys in Irving are tearing their hair out watching this.

[@nickchannel5364]

How did they learn to do this? Also, did you see the boss with clean shirt and gold watch?

[@sergeygutenko8638]

а зачем меняли сальники если бортовая и колодки были сухие. для контента разбирали. арабские румыны

[@valarmorgulisov8056]

Так там же колодки сломаны,присмотрись. Раз сняли за одно и сальники поменяли

[@АлександрПетров-ы5е2к]

- Как запрессовывать будем ? - А давай потыкаем грязной отверткой в новый сальник ..

[@RADVIX313]

love from 🇨🇦 As a heavy equipment tech in a "first world" country, I prob couldn't imagine dealing with your circumstances and still learning how do these jobs. Keep up the great work guys!

[@blazeykk]

You call it "great work"? Point me where it is great. They don't learn. Wacht videos on all pakistani mechanics channels and see that they still work in the same shitty way.

[@RADVIX313]

@@blazeykkyes I re-state they did a GREAT job. someone take that wrench outta ya a** 🤣😂 imagine being so low that your shitting on ppl, that have less than you. your hardest struggle is prob picking between brussel sprouts or broccoli lol I think you regard yourself as more important than you actually are, stop being a master mechanic and eat your vegtables timmy😏

[@blazeykk]

@@RADVIX313 So you are the same stupid as they are. You even can't answer the questions. My rule is not to discuss with idiots. They they will drag you down to their level and beat with experience. End of discussion.

[@blazeykk]

@@RADVIX313 Then you're stupid. You can't even answer the questions. It's my rule not to argue with idiots. They will drag you down to their level and beat you with experience. End of discussion.

[@percyfaith11]

I'd be surprised if that lasts 1/3 the expected service life.

[@Fleischpeitsche555]

I have so much respect for these people, they make a fantastic job , day by day.

[@theawesomeskills63]

Thanks for comming on my video😍 and more thanks for your precious appreciation,respect,love for these hardworking guys. visit again on my channel for more interesting videos🥰😊 love from pakistan 🇵🇰

[@Qusin111]

OMG the fact that no one died is what amazed me

[@muratdurmaz9855]

Always very nice to see minions working. Safety flip flops and pro gear. But they do a very good job.

[@unknownentity7408]

Safety sandals everyone remember!!! 🔥🔥🔥

[@ZubairKhan-vs8fe]

Very high quality and standard. Those 1ton hydraulic jacks are best.

[@tommyostlie]

Expert Mechanic’s? Well well 😉 Okei, they did the job 👍

[@imatter4619]

I'm totally into watching these type of videos

[@donktheclown]

Doing the best they can with what they have.

[@ralan5527]

The most important part about all this is, they got the job done and done right.

[@jimmyjohnson1376]

I do have to say I love there work please keep it up I know it's very hard work so work hard for you're money guys

[@theawesomeskills63]

Thank u so much for coming on my video 😍 and also thanks for your precious time and appreciation visit again on my channel for more interesting videos🤗 love from Pakistan 🌹

[@КонстантинИванов-ъ3ю]

Эти ролики надо показать на инструктажах по ТБ 😀

[@ВиталийБерезин-ч1г]

посмотрел,как он сальник отверткой сажает-у меня чуть сердце не упало...

[@Make-Asylums-Great-Again]

“Experts” 😶

[@VKS_RU]

Они там все попробовали его потыкать

[@r0id465]

Если он из плотной резины что ему будет то?

[@valerijkaufmann1990]

немножко песка в редукторах никогда не помешает!

[@grabdmitry]

Это притир

[@Oleg_nes]

Это точно🤣

[@Cicade-dn4kb]

Абразив всегда полезен!

[@PeocTaT1]

Гарантия, что клиент вернеться! И после отвёртки, резинка в идеальном состоянии.

[@evgenymikhaylov2567]

а в других условиях они работать и не могут, видео видео где такие же рабочие выплавляют из металлолома болванки, куют их в вал а затем вытачивают огромные коленчатые валы для судовых двигателей?

[@Hillbilly1959]

Job well done gentlemen.

[@vissitorsteve]

Such amazing skills! These men likely work all day for what workers in developed countries make hourly and complain about. It's embarrassing to read the negative and ignorant comments below...

[@Васёк-о9н]

Просто кое кто из этих развитых стран веками грабил и колонизировали этих бедных людей.

[@anitakerry3032]

Totally agree . These guys work hard and im sure for little money yet the western world whingers are out to criticize.

[@johnrose7491]

These blokes may be ignorant of working practices but they risk their lives doing a job that the western world would not approach.They are HEROES

[@СавелийЕвстропович]

детали тут же в песок складывают, сальники новые отверткой вставляют, а покрышка у которой корт торчит и дыры никого не смущает?

[@ИванЛоренгель]

сальник который не бежал не смущает?))

[@PeocTaT1]

И так сойдёт

[@Фэмили-и4м]

Покрышка денег стоит, они ее из дерева потом выпилят

[@enriquegrando4423]

Mis respetos a estos mecánicos que trabajan a puro pulmon felicitaciones!!

[@memememe2674]

These are NOT experts. They are men using basic tools in tough conditions. The work is not great, it will just get the machine cc working again, who knows for how long.

[@z1lla4]

Are you jealous?

[@theclinchdrive]

$80/hr here in Western Australia in mining at the moment. Only to imagine what these guys get paid working with basic tooling. Good effort lads

[@theawesomeskills63]

Thanks for commenting on my video❤️ and more thanks for your precious appreciation for these hard-work guys…visit again on my channel for more interesting videos❤️❤️ love from 🇵🇰

[@ЕвгенийМиронов-к3ж]

Домкрат на гнилой пень. Н- надёжность. Про остальное вообще без комментариев. Супер ремонт

[@ringandpinion3064]

Sometimes these videos really are awesome in how they make repairs with minimum tools and facilities. But removing that wheel bearing cover by prying it off didn't make sense, there are jacking holes in the cover and some of the bolts remove will fit in them. Tighten those bolts in those holes and you pull the cover right off.

[@heinzfissimatent4294]

haha ...they never heard about this white men tricks.....

[@АртурСац]

you can make it even easier, just tap on the center of the lid and it will come off by itself 😁

[@haqkomano4175]

They are working the hardest heaviest job without proper tools, amazing.

[@rockkitty100]

These guys would be amazing if they have a decent shop and decent tools!!!

[@ralan5527]

It just goes to show that you can get the job done without all the fancy snap on tools.

[@frankbeans2175]

Just in case anyone's having a shitty day...... Just remember you're not these guys

[@Moped-Frank]

holy Jesus!! DIN ISO 9001 certified mechanics/workshop.

[@petermccuskey1832]

Amazing work accomplished.

[@abeonthehill166]

Fascinating ……..i think the seals should not be pushed into place with a screwdriver as this is sensitive to damage and this could damage the seal. The Tire could do with a change as well. Great to see and thanks for sharing.

[@nexgenua]

Ну в принципе еще лет 20 бы ходило, если бы не разобрали полностью исправный узел и не вываляли в глине и песке. Что это кстати за национальная традиция такая, с умным видом разбирать сложные механизмы и доламывать их?

[@АлексейВойтовский]

Мне нравится, как они ничтоже сумнящеся все в песок кидают

[@r0id465]

Они сальник меняли, и в принципе нормально все сделали кроме того что в песок конечно кидать не стоит.

[@tumor480sm]

I just really love the uniforms for work these people use and the steel toed shower shoes

[@cjanderson4593]

I don’t think they care what you think of them, guaranteed %100 you wouldn’t do half of what they can 😂

[@ronaldbrosius7488]

A quick tip when installing duo- cone seals, spay oring with brake cleaner and quickly push it in. It allows the ori g to slide right in. You have to be quick

[@Make-Asylums-Great-Again]

I prefer to use gasoline mixed with sand.

[@Teddy-vv9iz]

These guys are awesome 👌 👏.

[@hektorkoralgol6345]

Huge respect Best regards

[@anitakerry3032]

Imaging working under these condition get payed little ,risking your life doing this, yet they still have time to smile. Now this what i call hard worker. A big 👍 up to you guys . love watching what you do .

[@АндрейПар-т3о]

Рабский труд за копейки,и так сойдет.Можно и по три раза в неделю приезжать на ремонт.

[@Someguy6571]

Just drop the stuff in the dirt. Good place for seals and bearings. Such half assed work. Stuff must not last too long with such work methods.

[@ИванСергеевич-ц4т]

Жаль нет видео где примерно в таких же условиях такие же ребята делают эти сальники.

[@MrMopar413]

I used to do that type of work on Wagner Mining Equipment machines at the Wagner Factory in Portland Oregon. But our axles had internal wet disc brakes that even harder to do. Brings back a lot of memories. Those guys lifted that stuff by hand , SOB. That stuff is extremely heavy but I had overhead crane and straps. Good work guy’s 👍👍👍👍👍 you deserve a couple of thumbs up.

[@timbodnar6711]

These guys definitely aren't weenies.

[@АлексейВойтовский]

How mach sand you need put into gear?

[@СергейСергеев-ы8е1ю]

Жесть, как после такого ремонта техника вообще работает...

[@PeocTaT1]

Нет. Это только для видео

[@NeoPioner]

САТ бессмертен

[@tjscott8948]

They are working on million dollar machines!

[@theawesomeskills63]

Exactly

[@stevebodalenko5286]

All those excavators hanging around and nobody thought to use one to sling the wheel off? Surely one was operational..

[@melin1969]

if it was your excavator would you like them using it as a crane for thier workshop ?

[@MrMopar413]

I thought the same thing

[@robertlucyksr667]

Good job guys, get ur done.

[@Сибес]

Мы в 80х в колхозных гаражах тоже трактора и всё такое ремонтировали и не сильно технику безопасности соблюдали, но тут просто УЖАС какой-то. Начиная с установки домкратов и их использывание и заканчивая самой техникой. Да и сам ремонт явно на месяц другой и опять на ремонт надо ставить.

[@Bawarez1]

я удивляюсь что у них с такими работниками ещё и такое огромное население, там вроде должно бы ть минус миллионы. а не плюсы.

[@vince6056]

Hey can you help with this loader Hold on. Let me put on my work sandals

[@lawrencejneuser8801]

It's amazing watching people work in the dirt with the minimum of technology.

[@carbastan1461]

Спасибо ребятам за мастер класс по ремонту с применением высоких технологий! Молодцы! Глаза боятся, а руки делают! 😇👍🤝✊🤛👏👏👏

[@theawesomeskills63]

Thanks for your precious appreciation for these hardworking guys …visit again on my channel for more interesting videos🥰🌹

[@Gibert-f8e]

Так-же будешь делать 😂

[@martinkilleen7607]

Any chance of broadcasting some of there health and safety meetings ?

[@jeremiahhartley4566]

As resourceful as these guys are you would think they would have made a dual cone seal installation tool

[@joefran619]

send them one

[@martinswiney2192]

They got one. Its a multi tool screwdriver, chisel, pry bar and seal installation tool. Possibly also a fork at lunchtime.

[@alessandermorgantini4634]

Tem que dar valor para esses mecânicos. Serviço pesado todo feito no braço. Muita força de vontade deles. Parabéns.

[@Gemeos1986]

Vdd meu amigo os cara e foda

[@joelfernando1]

Tinham que vir os brazucas podres falar dos seus congéneres terceiro mundistas!😂

[@paulharvey1947]

No jack stands Prying off drum and plantery gear Using a flat blade screwdriver on the NEW seal Gear oil all over brake pads and wheel drum This is a failed repair as they have no clue what they are duing

[@Tsamokie]

I'm glad to see some one knows just how bad these clowns are.

[@HeLLLoKitTTyy69]

Poor little snowflakes crying. Lets see how your snowflake asses do under these conditions. Y’all wouldn’t last a day, clowns 😂

[@bobpitt1261]

Jacks placed on and under slopping surfaces. A sure sign of experts at work.

[@joshb6993]

But they did this 800 dollar job for 37 bucks all up

[@jay_bro8113]

Gotta love the ppe

[@theheyseed]

I love that there is always at least that one guy sitting on the side (or on the machine in this video) watching.

[@Qusin111]

or under

[@Mr880881]

Watch the last 10 seconds as he taps the hub face. Watch to see how much sand falls out of this thing. And the last 2 seconds we have the fella with camera ang gold watch giving the thumbs up.

[@dinoprather1254]

What is the spec for how much dirt to apply, 1 or 2 cups ?

[@DaFoxForever]

Throwing gears in the dust. Expert level.

[@TroyOnymous]

They did the best with the knowledge and tools they had to work with, but I still cringed a little bit at the guy using a flathead screwdriver to force in the axle seal rubber at 15:15 🤯

[@Tsamokie]

Very bad process for seating the seal. They didn't spread some oil on it.

[@barrelgardener7527]

@@Tsamokie You never spread oil on a duo cone seal rubber when seating, should be installed with evaporative solvent.

[@joshb6993]

That flat head will be blunter than a baby's bum...

[@alitn588]

I remember when I was I child me and my father change our Mack truck seals ourselves you can say, somehow like this !

[@ЯНАОАККР]

Самое интересное не показали. Как они колесо одевать будут?

[@coldlight9776]

Поверь оденут они могут даже землю перевернуть 🙏😁

[@PeocTaT1]

Не молча точно

[@steelkz12]

смазывает подшипник который в масле купается, интересная технология

[@flashgarage]

Все потому что они необразованные и не понимают элементарных вещей и принципов работы. А делают как их научили когда-то, забыв объяснить суть

[@r0id465]

Ту поверхность что он смазывает как раз таки в масле не купается вроде как, перед ней сальник стоит.

[@r0id465]

@@flashgarage Образование это когда сидишь конспекты пишешь под диктовку? Это называется образованием? Эти ребята реальным делом заняты, хоть и по цыгански его делают, а не переписыванием табличек из учебника.

[@flashgarage]

@@r0id465 у вас извращённое понятие об образовании

[@r0id465]

​@@flashgarage Наверное вам повезло, и через все то унылое дерьмо, через которое довелось пройти мне, вы не проходили когда учились.

[@laurieredfern8045]

I was expecting to see the hydraulic jack punch a hole in the axle housing there should have been a block of wood or steelbetween the jack and housing

[@KrisNolanFix]

The expert mechanic’s have now left the chat.

[@bigtreelittletree]

I love these videos so much and what's even better is with it sped up like this it makes me feel like I'm watching and hearing minions from the kids movie.

[@theawesomeskills63]

❤️🌹

[@johnballerino9172]

Seems like these guys can fix/ repair Anything.

[@JohnJohnson-Aotearoa]

As always, hard workers doing a great job👍

[@mohammedaziz6540]

Un grand respect à ces travailleurs.

[@ZINHAz]

Esse retentor pode ser colocado com barbante , da mesma forma que se coloca borracha de para-brisa

[@A-NR]

Caterpillar will not approve, but the World approves. You work with the tools you have, and get it fixed.

[@Amarnath2k2]

😯 superb

[@terranova486]

I enjoy watch these vídeos..i love mechanic ..greetings from Brasil

[@theawesomeskills63]

♥️♥️

[@paulharvey1947]

I wouldn't be using this method - can't imagine this is going to last

[@HeLLLoKitTTyy69]

What method would you be using under these same conditions? They’re working with what they have available. That’s the problem with Americans, too Fking spoiled and can’t give credit where credit is due

[@jimdandy7772]

Another job well done

[@truthsmiles]

20:10 you can really see the expertise in that pattern and precision torque wrench

[@jondrew55]

10 grunts is the torque specified in the manual

[@waynemasters8673]

I'm alright Jack! I just got a crowbar across the forehead! The bent screwdriver pry also a weapon. Ever had a 200 lb. weight land on your sandal?

[@christiangossart9406]

quand je vois ces hommes travailler dur ,avec si peu d'outillage ,je suis admiratif .

[@giorgiobassi9078]

👍🇮🇹😁👀

[@dgb5820]

Where can I get a pair of those open toe safety boots for the summer

[@discoveryman59]

Surrounded by all that heavy equipment and they don't think to use some of it the remove the tire? Maybe fix the things first that can help you with other jobs.

[@HeLLLoKitTTyy69]

Would u want someone using your equipment to help with their other jobs?

[@discoveryman59]

@@HeLLLoKitTTyy69 YES!!

[@Bryanbobber]

Reported for misleading clickbait title

[@Someguy6571]

The crooked log with a bottle jack also being crooked makes me feel so safe if I were to get under that thing. Aw well guess there is more people that brains over there if that flimsy jack were to slip.

[@timbodnar6711]

Who cares? Their culture isn't imprisoned with the idea of "safety".

[@machineman8388]

@@timbodnar6711 "imprisoned" lmao what an idiot you are

[@Someguy6571]

@@timbodnar6711 Not sure if you are being serious or not. The ideal of safety... Like going home with all my arms and legs? Or fingers and toes? Maybe not having to worry about dying due to shoddy workmen's ship? Although again when you got a population in the billions you got plenty of pawns if you need replacements.

[@jpjaegers]

Torque wrench set to "good enough"

[@caddyrack]

the cheap one are "Snap-off" close enough.....