You're channel is simply amazing. I have a professor who is not very inspiring and I have to say your use of examples and explanation of theory is great. Thank you so much, I will make sure to tell any of my friends struggling with machine design to check you out. Best of luck growing in the future!!
@TheBomPE5 жыл бұрын
Thank you so much for the positive review! I'm glad you found it helpful!
@martinjamer2744 жыл бұрын
I will use this for my students. I will add some practical examples. Very good explanation. In my experience, students need some time and many examples of use to understand this diagram. Thanks, very helpful.
@TheBomPE4 жыл бұрын
I'm glad it looks like it will be useful! Thanks for the review!
@shrikantzunjare17712 жыл бұрын
Wow amazing explaining about fatigue and cyclic loading , i have seen best ever video which is explain deeply about fatigue
@narveful3 жыл бұрын
Love your method of teaching! Explanations are so clear, and a great example where you applied all the information you previous taught!
@TheBomPE3 жыл бұрын
I'm glad you like it! I appreciate your viewership!
@muhammadzaini57282 жыл бұрын
🤭
@PALakshminarayanan5 жыл бұрын
I am addicted to your lectures!
@TheBomPE5 жыл бұрын
I suppose I have heard of worse things to be addicted to. :) I'm glad you are enjoying them!
@facha17473 жыл бұрын
You explain much better than my professor. Thank You!
@TheBomPE3 жыл бұрын
I'm glad I could help! Here is a playlist of the lectures from that course, in case it is of interest: MEEN 361: Advanced Mechanics of Materials: kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS All the best to you!
@minhkieu34122 жыл бұрын
The lecture is very good, the lecturing way of Mr. professor even better. this is excellent performance and easy to understand. Thank you very much Mr Professor !
@jeffersonap3863 жыл бұрын
Your class was excellent! You explain it in a way that is really easy to understand. Thanks!!
@TheBomPE3 жыл бұрын
I'm glad I could help! Here is a playlist of other lectures I give in that course in case you are interested: MEEN 361: Advanced Mechanics of Materials: kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS Thanks for watching!
@juansebastianpintodelgado69764 жыл бұрын
Its marvellous content, the way you explain. Tank you very much for sharing this content ! Greetings from Colombia.
@TheBomPE4 жыл бұрын
Thanks for the positive review! I'm glad you are finding my videos useful! Thanks for watching!
@AdityaTiwari-tu1bl4 жыл бұрын
good explanation, in my university my prof. just finished this topic in 30 mins
@TheBomPE4 жыл бұрын
I'm glad it was helpful! In case you might be interested in my other content, I have it organized into these playlists: ENGR122 (Statics & Engr Econ Intros): kzbin.info/aero/PL1IHA35xY5H52IKu6TVfFW-BDqAt_aZyg ENGR220 (Statics & Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5sjfjibqn_XFFxk3-pFiaX MEMT203 (Dynamics): kzbin.info/aero/PL1IHA35xY5H6G64khh8fcNkjVJDGMqrHo MEEN361 (Adv. Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS MEEN462 (Machine Design): kzbin.info/aero/PL1IHA35xY5H5KqySx6n09jaJLUukbvJvB (MEEN 361 & 462 are taught from Shigley's Mechanical Engineering Design) Thanks for watching!
@chestiii1234 жыл бұрын
our prof. talked for like 5 minutes and than went on to the next topic.... welcome to the german way of engineering xD
@EGDKEGD5 жыл бұрын
This is very much appreciated and helped out a ton. Wish I had you as a professor. Will definitely pass this on. (PS the first cycle yield equation your looking for is (6-49) =)
@TheBomPE5 жыл бұрын
Come to Louisiana Tech, I'll be your professor :) Good call on the yield equation!
@llomax96423 жыл бұрын
I finally understood Goodman diagram. Thank you so much!
@TheBomPE3 жыл бұрын
Glad it helped! Thanks for watching!
@berkluleci31722 жыл бұрын
I wish I could be attending you classes! It really helped me to build a foundation on the topic, thank you :)
@TheBomPE2 жыл бұрын
Glad it was helpful!
@PALakshminarayanan5 жыл бұрын
Excellent, Thank you for the lecture.
@TheBomPE5 жыл бұрын
I'm glad you found it helpful! Thanks for watching!
@UmarSaeed12 жыл бұрын
Life saving content, the things which I am unable to understand before now I can understand them easily 😍
@TheBomPE2 жыл бұрын
I'm glad I could help! Thanks for watching!
@minghuifang4074 жыл бұрын
Really great explanation. One of the best if not the best! Any lectures on Failure modes (Bolted joints and Threaded fasteners), Elastic instability (Buckling of columns), Pressurised cylinders (pressure vessels, compound cylinders) just wondering?? You have this way of teaching that makes this subject looks more interesting to the viewers and want to know more. Pretty sure there is this sentence in every comment "I wish I had you as a lecturer." Excellent and wonderful job
@TheBomPE4 жыл бұрын
You are very kind! Thanks for the positive review! I do have videos that address most of those topics. (I don't have a buckling lecture recorded, but I plan to very soon.) Stay tuned, I'll post some links.
@TheBomPE4 жыл бұрын
kzbin.info/www/bejne/on26mniBrKyJpM0
@TheBomPE4 жыл бұрын
kzbin.info/www/bejne/sIeYpIF9ac2We5Y
@TheBomPE4 жыл бұрын
kzbin.info/www/bejne/q5-0l3Rrm66Miac
@Yndiax4 жыл бұрын
Very good, Thanks for sharing I understood it
@TheBomPE4 жыл бұрын
I'm glad you found it clear and useful! In case you haven't found them yet, you might be interested in some of my other content, organized in the following playlists: NGR122 (Statics & Engr Econ Intros): kzbin.info/aero/PL1IHA35xY5H52IKu6TVfFW-BDqAt_aZyg ENGR220 (Statics & Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5sjfjibqn_XFFxk3-pFiaX MEMT203 (Dynamics): kzbin.info/aero/PL1IHA35xY5H6G64khh8fcNkjVJDGMqrHo MEEN361 (Adv. Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS MEEN462 (Machine Design): kzbin.info/aero/PL1IHA35xY5H5KqySx6n09jaJLUukbvJvB (MEEN 361 & 462 are taught from Shigley's Mechanical Engineering Design) Thanks for watching!
@evelyncropper95603 жыл бұрын
Clear and very well done. Thank you
@TheBomPE3 жыл бұрын
Thank you! I'm glad you liked it!
@paulromano51374 жыл бұрын
Very helpful explanation, thank you.
@TheBomPE4 жыл бұрын
I'm glad it helped! Check out my other Shigley- based content if you are interested. It is collected into these two playlists: MEEN361: kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS and MEEN462: kzbin.info/aero/PL1IHA35xY5H5KqySx6n09jaJLUukbvJvB Thanks for watching!
@pommuduraikumarp69574 жыл бұрын
Thank you very much for your lecture.
@TheBomPE4 жыл бұрын
I'm glad you found it useful! Here are some of my other playlists in case you haven't seen them yet and might be interested: ENGR122 (Statics & Engr Econ Intros): kzbin.info/aero/PL1IHA35xY5H52IKu6TVfFW-BDqAt_aZyg ENGR220 (Statics & Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5sjfjibqn_XFFxk3-pFiaX MEMT203 (Dynamics): kzbin.info/aero/PL1IHA35xY5H6G64khh8fcNkjVJDGMqrHo MEEN361 (Adv. Mech of Mat): kzbin.info/aero/PL1IHA35xY5H5AJpRrM2lkF7Qu2WnbQLvS MEEN462 (Machine Design): kzbin.info/aero/PL1IHA35xY5H5KqySx6n09jaJLUukbvJvB (MEEN 361 & 462 are taught from Shigley's Mechanical Engineering Design) Thanks for watching!
@facha17473 жыл бұрын
I undertand this topic thanks to this video!
@javadrahimi64102 жыл бұрын
Perfect
@TheBomPE2 жыл бұрын
Glad you liked it!
@michaelswanbom60236 жыл бұрын
If you found this video useful, consider helping me upgrade the old tablet PC I use to create these videos! Thanks! www.gofundme.com/help-replace-my-2011-tablet-pc
@mohamedesmael54283 жыл бұрын
good explanation thank you❤️❤️
@TheBomPE3 жыл бұрын
I'm glad you liked it! Thanks for watching!
@justinlewis60934 жыл бұрын
this lecture was the bom
@TheBomPE4 жыл бұрын
Thanks! I'm glad you enjoyed it! I'll see you this afternoon!
@moeinchelengari72145 жыл бұрын
Thanks alot. Really useful
@TheBomPE5 жыл бұрын
I'm glad I could help! You might also be interested in my other course I teach out of the Shigley text: kzbin.info/aero/PL1IHA35xY5H5KqySx6n09jaJLUukbvJvB Thanks for watching!
@moeinchelengari72145 жыл бұрын
@@TheBomPE I will watch them for sure
@mstfylqz19479 ай бұрын
thank you
@Conoroneill4204 жыл бұрын
Hi Professor I have a question. When the midrange value (σm) is not given to us, how can we determine the min & max limit stress values from the Smith Goodman diagram?
@user-zo8go8mt7t Жыл бұрын
How can we draw the load line on fatigue strength diagram?thanks
@keshavmurthy28443 жыл бұрын
Hi, what are the practical sources of fatigue loads in rotor components. I'm assuming unbalance during rotation could be one of the source of HCF. Likewise, what could be the source for LCF?? Thanks in advance.
@SeracS3544 жыл бұрын
Thank you for the great lectures. Is there a limit when the stress is applied so suddenly that it should be treated as an impact instead and is impact covered another lectures?
@cogitateandabet3 жыл бұрын
Professor, I have some problems and misunderstanding. (For infinite life)In case of fully reversing load, sigma max and sigma a is within endurance limit. When the load is repeated in nature, sigma max can go beyond Se(up to Sy)and sigma a should be within Se? Why should sigma a decrease, when sigma m increases in magnitude?
@lengockhanh40184 жыл бұрын
hello sir ! i have a question if in case d/w= 0.1 and h/w = 0.5 when value of Kt how much ? thank you
@rafaelrodriguesfortes30013 жыл бұрын
Which book are you using as reference?
@cubanolibre1033 Жыл бұрын
Could anyone tell me what text book does he use?
@TheBomPE Жыл бұрын
I teach this course out of Shigley's Mechanical Engineering Design, 10th ed. Thanks for watching!
@miamisasquatch Жыл бұрын
Shigley's 😍😍😍 THE book
@AdityaTiwari-tu1bl4 жыл бұрын
Sir i am interested in this field of mechanical engineering, what more i could do in this field ?
@TheBomPE4 жыл бұрын
I am a mechanical engineer, so many of my videos have that kind of a flavor. There are many career fields open to mechanical engineers because it features a very broad base of study. Are you asking for video suggestions, or are you looking more for career advice?
@zorkan1116 жыл бұрын
39:10 "We want to take the portion of it where the area is minimum". Doesn't the stress concentration factor already take into account the fact that there's a hole there? Shouldn't you then just plug in the nominal area of the rod, instead of the area lessened by the hole diameter?
@TheBomPE6 жыл бұрын
No, you want to use the reduced area at the hole. The stress concentration factor accounts for localized increase in stress caused by the discontinuity in the continuum of the material (the hole). It does not account for the reduction in area due to the presence of the hole. You have to do that as I show in the example.
@zorkan1116 жыл бұрын
OK. Thanks for the reply. Also, thanks for the well delivered, easy to understand lecture :)
@TheBomPE6 жыл бұрын
My pleasure! I'm trying to grow my channel, so please spread the word! :)