THEBUGNUT.com - VW Beetle Spring Plate Bushings

[@jamessabastian6707]

Tks bro it's good watching this maybe I will do myself 😅

[@curbowbass6124]

Great video Brutha!!! Keep those updates coming.

[@thebugnut708]

Thanks! Will do!

[@mukashi911]

I see that you used wheel bearing grease on the rubber bushings. This seems to me to be the right thing to do, but some say not to lubricate them at all. What are your thoughts?

[@brianfrancis2862]

try get spring plate off one been seting for years any tips

[@toddmichaeljaniszewski]

Any suggestions for putting them back at stock ride height 1) they all came completely out and you barely got any degrees marked., 2) you had to have all the metal bead blasted, so there's no marks now. I basically need to install mine from scratch as if they were never on the car before.

[@thebugnut708]

I assume you would need to research what the starting angle should be. Then by turning the inside and outside splines you should find the right Combo to give you the stock ride. Do a search on the Samba.

[@michaelfiaschetti2574]

I have a 1958 restored beetle that sags on drivers side will help my car

[@brianchisnell1548]

All VW's are IRS. Swing axle or double jointed axles. According to the owners manual.

[@frankschwartz7405]

Whatever. "IRS" has CV joints/

[@lesliepope6420]

THANKS VERY HELPFUL, BUT YOU COULD HAVE PLAYED THE ALLMAN BROTHERS OR STEELY DAN..

[@sonidofestivalshow9996]

Can you send me the brand and part number of the plastic bushings?

[@Spidious]

Please get rid of the music...