Nice. I’m glad I found your videos. I’ve had a 30 year old caravan for the last four years. Today bought a 2010 sprite major, tidy but a bit tired. I’m gonna try and make it look like it’s just left the factory!
@thecaravanplace Жыл бұрын
Great 👍
@andyn62662 жыл бұрын
Great job Mark,brilliant result.
@thecaravanplace2 жыл бұрын
Thanks Andy
@davidwil6934 Жыл бұрын
Excellent video and very informative.
@thecaravanplace Жыл бұрын
Thanks David
@chrispritchard46764 ай бұрын
A good repair to ABS, well done. In my (too many) caravan and vehicle repairs I always finished with an edgeless clear varnish such as U Pol 1K smart varnish and it protects the finished area for many years to come. Most aerosols are cellulose based and suffer weather damage in a short time leaving a dry finish. The U pol prevents this.
@stevethomas-hm6lo Жыл бұрын
Great video Mark very helpful many thanks 👍😀
@thecaravanplace Жыл бұрын
Thanks Steve
@2013Davey2 жыл бұрын
I know your heating the panel.... but with spray cans, dunk them into a mug of hot (almost boiling) water and let the paint heat up, the spray goes on much better
@thecaravanplace2 жыл бұрын
Ohhh this sounds a great tip. Will have to try. Thanks 👍
@paoloallen2 жыл бұрын
Hi... you're quite handy with a tool in your hand Mark lol... sorry we couldn't resist.... brilliantly helpful video ... hope we never have to do it naturally lol ... take care 'The Camp Caravanners'
@maku8313 Жыл бұрын
Very nice work Mark.👍
@thecaravanplace Жыл бұрын
Thanks 👍
@caravaningincarathevan4672 жыл бұрын
Fantastic repair. Xx
@estud47496 ай бұрын
Great video and v good demonstration. Thank you.
@thecaravanplace6 ай бұрын
Glad it was helpful! 👍
@estud47496 ай бұрын
@@thecaravanplace Many thanks again. I have ten hairline cracks to fix as I can't afford the £9000 it will cost me to replace both front and back ABS panels on our Elddis xplore 304 ( I have already forked out for the full 10yr warranty & full servicing and taken huge care of the caravan - but Elddis's does not seem to want to honour their side of the bargain). The caravan is stuck together with tape at the moment.
@amazoniaamazonia7225 Жыл бұрын
Helpful video, thank you.
@grahamgetsabout26722 жыл бұрын
I always watch and like but I’ve got to say I was impressed by your repair 👍
@thecaravanplace2 жыл бұрын
It's not 100% perfect and if it was a newer caravan I wouldn't have attempted, but on older cans it's worth having a go.
@grahamgetsabout26722 жыл бұрын
@@thecaravanplace ha ha Mark that’s a brilliant reply our caravan is a 1998 so your a big help 😁
@caravanningwithcharlie2 жыл бұрын
Good job Mark. You would never know.
@lenbaker12 жыл бұрын
Well done, nice finish. Not a caravan owner yet but loving your videos Mark. Perhaps when we’re ready we’ll pay you a visit.
@ianwilkinson55498 ай бұрын
Great stuff mate
@marcrufus5814 Жыл бұрын
Cracking job Mark! The electrician in me wants to point out to people to make sure they have an rcd on anything they are using outside and fully uncoil and extension leads or they can melt.
@thecaravanplace Жыл бұрын
Thanks Marc, great advice.
@ncb27342 жыл бұрын
Great video Mark. Will have a go at the few I have on ours
@cravan19822 жыл бұрын
Nice job Mark 🦾🦾
@thecaravanplace2 жыл бұрын
Thanks William
@stephencarter66342 жыл бұрын
Useful thanks 👍
@colinbennett34332 жыл бұрын
Hi Mark, thank you for the video it was informative. May I make what is intended as constructive comment. You mentioned some grades of grit paper but not all. As a total novice I am not sure which gritting papers to use so will have to do some more research before attempting my repairs. Your video has given me the inspiration to do the repairs, I now need to acquire the knowledge. Thanks again
@thecaravanplace Жыл бұрын
I'm good at giving half the info lol. 40 grit is very rough and a 1000 grit is more like a finish very smooth paper. Normally start with about 250 400 800 then 1000-2000 to finish off.
@barryelstone2992 Жыл бұрын
Instead of 40s use 80s it will leave shallower scratches in the filler and surrounding area, finish with 240s then prime finally 800s wet or dry before painting, it's also a good idea to key the area beyond the repair with a grey scotch pad, wipe area with a panel cleaner to remove wax etc. To finish let paint dry overnight and polish with G3 liguid paste this will shine the paint and remove any dry edges.
@jesskatrikАй бұрын
Hi love your videos, I am almost 55 years old and have bought sold and repaired caravans alot over the years , I was wondering if you can point me in the correct direction to become a qualified habitation inspection engineer and who I can contact to take courses etc
@thecaravanplaceАй бұрын
www.nccacademy.org.uk/ everything should be here 👍
@wsatnutter96742 жыл бұрын
top job that man
@haidenphoenix2 ай бұрын
I've just watched your video. I have a hairline crack around the window on the front panel. Would this method work on that? Thanks
@ianchappell4199 Жыл бұрын
Great job. My caravan is 13yrs old and as a small dink in the alloy metal side. How do I find out what colour white the paint is? I have a Swift Charisma 550 2090. thank you.
@thecaravanplace Жыл бұрын
Hull white should be the original colour, but if you remove the side locker door and take to your local car paint shop, they will mix to your locker door which should be a better match.
@stephenkelly1563 Жыл бұрын
Nice job , hope you never got any over spray on van beside you !!!
@neilmayes1189 Жыл бұрын
Thanks for the info Mark. Any chance you could let me know what filler & plastic primer you used. Thanks.
@thecaravanplace Жыл бұрын
They do a few different plastic fillers and all very much the same. The plastic primer was from Halford if I remember
@neilmayes1189 Жыл бұрын
@@thecaravanplace Thanks a lot mate 👍
@MrG.422 жыл бұрын
Excellent video yet again Mark and Mrs Mark. How do you find the correct type and colour code for the paint?
@thecaravanplace Жыл бұрын
Google will give u most caravan colour codes. But to be perfect, remove a side locker door and take tona local car paint supplies. They should be able to scan it and mix the correct colour
@MrG.42 Жыл бұрын
@@thecaravanplace what a good idea. Thanks.
@PhilipShaw-m3q7 ай бұрын
Great informative video. What primer and top coat did you use? Thanks
@JCJ7754 Жыл бұрын
Great video, would that filler work okay on ABS panels too?
@thecaravanplace Жыл бұрын
Should do, the fiberglass filler will give lots of strength. www.amazon.co.uk/Davids-ISOPON-Glass-Fibre-Repair/dp/B0148WFX16/ref=asc_df_B0148WFX16/?tag=googshopuk-21&linkCode=df0&hvadid=208026936151&hvpos=&hvnetw=g&hvrand=13127807976097066197&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1006562&hvtargid=pla-712949187745&psc=1 That link should take you to the fiberglass filler then you can use the other filler to finish.
@JCJ7754 Жыл бұрын
What paint are you using and where do I get the correct paint/colour. Thanks.
@thecaravanplace Жыл бұрын
We had the colour mixed by a car paint shop. but you can get from ebay, search caravan spray paint
@fitzylar5 ай бұрын
How do you match the spray paint colour, to the caravan colour? Is there a code number?
@thecaravanplace5 ай бұрын
They do caravan paint on ebay and you can select the make
@bloominfast7 ай бұрын
for filling the crack you can make a plastic filler using lego bricks dissolved in pure acetone. the bricks will melt and make a slurry that you can then apply to the crack ( v the crack first) ps any crack in plastic or fiberglass needs drilling at each end to sop the crack extending
Looks good on camera. A question I'm going to chrome paint my fridge shelfs is that something you have done in the past? as fridge parts aren't available any longer or crazy prices
@thecaravanplace2 жыл бұрын
Hi Karl, I've not sorry. Try it and let me know how they go. If they need doing u can always sand blast them back off and try again. 👍
@karlmabe16492 жыл бұрын
@@thecaravanplace Thanks for replying. mine are badly tarnished and let down inside of our fridge so going to try a refurbishment chrome paints are available
@gnarlyboot4772 жыл бұрын
How did you match the paint colour? Looks like an excellent repair.
This guy should be able to tell u from the caravan you have
@crevusllohcin2 жыл бұрын
Brilliant job Mark, looks like brand new.
@malc1234ful Жыл бұрын
very good vid, would this work on a motorhome?
@thecaravanplace Жыл бұрын
If it's plastic then yes. 👍
@RachelRichardson-g1e Жыл бұрын
Great, where do you buy the kit from with the stables
@thecaravanplace Жыл бұрын
Ebay or amazon 👍
@babblingbrooksoutdoors2 жыл бұрын
Hi what was the paint that you finished it with ??
@thecaravanplace Жыл бұрын
I used a mixed pre mixed spray paint from ebay. Hull white. www.ebay.co.uk/itm/154069870401?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=vCUOVO6VTdy&sssrc=2349624&ssuid=gsaSJsTxTaa&var=454199158307&widget_ver=artemis&media=COPY
@terrycolcombe4872 жыл бұрын
Hi. Would you do the same process for spider cracks ?
@thecaravanplace Жыл бұрын
Normally it's gelcoat with the spoder cracks, you can get a gelcoat filler and then paint, but they do tend to come bk unless really ground out.
@tonysmedia64082 жыл бұрын
Excellent job Mark, looks amazing. Your camera woman keeps doing Sterling work 👏🏻👏🏻👏🏻 Have you done a spongy floor repair video?
@thecaravanplace2 жыл бұрын
Thanks Tony
@thecaravanplace2 жыл бұрын
No floor as yet sorry
@bobik632 Жыл бұрын
Well done. What paint did you use for the final coat?