How To Lubricate Your 1911

[@johnmaynard8849]

Thank you for your advice! Just bought my first 1911 yesterday. #,s says it was built in 1919 for the Army . Appears to be in very good condition.

[@kyleblandon2250]

People tend to overthink this this, sure there are places you must be hitting but the reality is, look for wear and lube those areas, it's really that simple and can be applied to any gun. I have a wilson combat that I carry for service and I use oil on the sliding parts that show wear and I use grease on heavy impact areas (barrel lugs, lower lugs/link).

[@GuyWithAnOpinion2]

I've heard so many different opinions on how to lube a 1911; everything from 'they run just fine bone dry' to 'you can't overlubricate a 1911'. I'm glad I found this video. No better source for this information than 'straight from the Colt's mouth.' Thank you!

[@royalloyalty8248]

Metal on metal, LMFAO at whoever said run it dry.

[@GuyWithAnOpinion2]

@@royalloyalty8248 have you ever read posts on a gun forum? Everyone has advice that came straight from a Marine armorer with 20 years in The Corps.

[@royalloyalty8248]

@@GuyWithAnOpinion2 i dont care what a marine does. Alot of people dont know this. Ask anyone with a brain bigger than a peanut, they'll all say always oil everything that's metal on metal. Its common sense. Who would say run it dry? Its metal on metal, the rails need oil.

[@Phantom-darkness]

Light coat you can’t even see goes a long way. The polymer in the oil is what you need not the wetness. I wouldn’t take shooters or marine opinions I’d speak to a metallurgist about coating and drying. Wetness is bad as that picks up dirt and carbon but the property of oil is there when it’s been coated and wiped just run your finger over a barrel that way.

[@taylorcampbel9639]

@@Phantom-darkness I use the Remington rem oil and put just a thin layer on the slide works perfect for me.

[@Monster11B]

The Lucas oil is awesome. I switched to it three years ago. It doesn't evaporate off like CLP does. It really proved itself on my cuffs. Months worth of use before oiling.

[@renecolon3489]

Thanks just got my First 1911

[@survivingchicago5797]

Use it in good health👍

[@royalloyalty8248]

It will *NEVER* let you down. Great choice. You can *never* go wrong with a 1911.

[@MrLeatherface]

I just got my first. A1 us army model

[@jonathanaldana4941]

Same here Picked up a used Springfield, field stripped it for the first time today, beautiful piece

[@phobosanomly9473]

Just bought a Springfield Garrison. I already broke it down and oiled it, but like my AR, it's good to know how to quickly oil it.

[@crankybuzzard6867]

I use Mobil 1.... have for years on all my guns. Works great for me. Good video! Thank you~!

[@Leslie-mw2zu]

I remember a guy that used nothing but WD40 on his Beretta .

[@terrytibbetts2899]

Another detailed ad for Lucas Oil which Colt and Lucas have been connected together in a business model for awhile. No problem, just another commercial. Great video!

[@southernarsenal908]

But its false info

[@florianthomas7852]

When shooting 500-600 rounds per day and tomorrow you will do the same, it certainly wont hurt to field strip the gun, wipe down barrel, feed ramp and frame with an oily cloth to remove carbon build up and in that state oil the contact points. Will take just 5min of work and surely you will have the time in the evening for that.

[@rogergonzalez9295]

Thank you for having the easiest how to video ever!

[@southernarsenal908]

Might be easy but its also false!

[@rogergonzalez9295]

@southernarsenal908 , really? Do you recommend something else

[@southernarsenal908]

@ absolutely!!

[@dalysean86]

Great stuff. Just got a Sigp238 and wanted a simple explanation like this! Thanks for the product recommendation, I agree the applicator keeps you from over-lubing. I have a lot of shaving supplies and I use a similar applicator on my electric razors.

[@DarkKakarot315]

Great video! Nice and straight to the point. Love it.

[@madogllewellyn]

Good display of prevention maintenance!!!!! Keep Up the Good Work Colt!!!!

[@jdblack9703]

I’m going to the range now. All I have is Tri-Flow so it will have to do. I’ll look for the gun oil when I get back. Thanks for the tutorial.

[@mikehunter5046]

Top drawer content thanks Justin

[@oftenwrong.]

Thank you!

[@jimc6144]

Clear, concise and simple.

[@denniswerner1670]

I tend to prefer more oil than less. Thin coat on all metal surfaces, then extra oil on the places where metal rubs against metal. Favorite CLP is break free mil-spec, favorite oil is rem oil pro3.

[@taylorcampbel9639]

I take q tips and rub a thin layer of rem oil on the slide. I have tried thicker oils but it's not as smooth.

[@jackkielty8241]

What are your thoughts on Dry Lube such as Blaster or Otis?

[@J1Z06]

I had Ballistol on My Colt tonight. It didn't even make 100 rounds and started to choke. I added Mili-Tec to the barrel hood, end of the barrel and the back of the rails. After that it was fine.

[@omenlock]

A wise man said, treat your guns like your plate, if you eat in little or a lot wash it to put it away, I always clean my gun after shooting it doesn't matter if I shoot 500 rounds to 2000 rounds.

[@stevenbrown5210]

How in the world can you afford to shoot that many rounds at once? Are you a millionaire?

[@eatherkat4798]

@@stevenbrown5210 1000 round of 9mm target ammo is around $120-$210 😂 not that much honestly

[@Gunner70-fe8ji]

I couldn't agree more!!! I do the same thing. I work hard for my money and have thousands of dollars in firearms and they get the absolute best care, cleaned and lubed after every time out shooting and it doesn't matter if I'm going out the next day or not to shoot. Plus 1 for the "wise man"

[@DavidWenger-tw4dz]

Some people have upwards of 50,000 rounds and better stored away and put back. So 500 to 2000 range weekend no biggie. Some working men buy ancouple hundred rounds every paycheck, and when you get done working and it’s time to play. . . Let’s just say there is a stack of ammo over time!

[@hastingsperformance2]

After any range trip clean and lube the more you do this the more chance you will catch a fubar before it happens

[@vortec6209]

Appreciate the lubing information. Also inspired me to keep some lube in my range bag. Question: I have a Delta Elite from the 1980's that has served me well over the years. I would like to purchase a new one and have it customized. Does Colt have any plans to start making Delta Elites with a ramped barrel?

[@piercechance1085]

InstaBlaster...

[@mikesdname1]

what about the barrel lugs? I would like to see the gun lubed when disassembled

[@Metal1USMC]

Everyone has a preference and a snake oil. I prefer either Brian Enos Slide Glide Grease or Wilson Combats Ultimate Lube II Grease & Oils. On a 1911 platform I use Slide Glide Lite during cold temps and the Standard or Heavy during hot months. I grease rails in both the slide and frame to ensure complete coverage of the rails. Wipe any excess at the front and rear after cycling multiple times. Barrel hood, lugs and external barrel that mates to the barrel bushing. Using either on these contact points gives the impression of a slide/frame fitted with ball bearings. Incredibly smooth. Contrary to Internet myth neither of these attract dirt into the greased areas and I’ve shot 2,000 plus rounds before cleaning. All this with zero malfunctions and still completely lubricated. Quality grease/oil is the key. To each their own. Try either, you’ll be impressed.

[@Gunner70-fe8ji]

Everyone has and opinion and I'm not disagreeing either, but lets be realistic, who do you believe? This is a Colt video and CZ owns Colt and Dan Wesson. Colt says use Lucas CLP and DW has a list of CLP's NOT to use including grease on the rails.

[@TheLingrush]

My Taurus is very similar to this colt.....is there no need to take it apart to lube if already clean?

[@JosephMathys]

Thank you very much. Clear Straight Forward to the Point!!!!

[@victorv4340]

Do you have a video on how to adjust the rear sight? the manual is old and does not show how. I have a 1911 competition purchased brand new on 11-30-2022. can not find any videos on you tube

[@fuzzball7972]

I presume that Lucas oil is used by Colt in the factory? I've noticed the oil on a factory fresh Colt tends to smell pretty similar. Also happens to be what I use on my guns, Colt 1911 included. Gives it that new Colt smell I guess! :D

[@Knocked_down_a_peg]

Could you make a video where your hand doesn’t block you lubricating the rails?

[@Mo-fc2vj]

I'm using royal purple 5W20 on my 1911 i never fired it yet but cleaned factory oil and debris and re oiling

[@xANDRExFLC]

Perfect video. Gun feels great after hitting those 3 spots

[@BryanHocking]

Shooter's Choice FP-10 Lubricant Elite is my choice for lube post cleaning

[@oldwarmonger8750]

Awesome brother

[@frankbender5277]

Thanks very helpful.

[@dustinewing7974]

What about the barrel link?

[@florianthomas7852]

Doesnt matter much, also unlikely to run dry if you gave it a tiny amount of oil after field stripping.

[@dezent]

When you are filming this and decide that filming the backside of the guys hand instead of what he is lubricatinng... how do you come to a decision like that?

[@jbeef4306]

Answer this!

[@winstonchurchill3597]

Good question - I was thinking the same thing!

[@rahalwidanagamage]

Great content. Thanks ... can we use Treadmill lubricant silicone oil for the mag lubrication ?

[@coaldust01]

I use treadmill silicone oil for the whole gun, its cheap and its the same shit as these rebranded overpriced lubes lol.

[@rahalwidanagamage]

Thanks a lot @@coaldust01

[@productiondivision]

Excellent, thank you!

[@jefftaylor8644]

No clp?

[@larrycassidy1702]

Love my colt 1911. Does it hurt to dry fir the Colt 1911?

[@jared123123]

You can, but anything more the. A few here and there your much better off getting some snap caps. Can cause excess wear etc if you dry fire a lot. Snap caps are nice, can safely practice loading/ unloading and firing without any risk of a ND or damaging the firing pin from dry fire

[@Mat-threw]

Is hoppes number 9 ok to use for 1911 pistols?

[@robdunham7398]

To clean, yes. To lube, no. And stay away from WD-40 all together.

[@tomglpn]

No lockup lug lube?

[@robdunham7398]

How about the front rails? They need it as well.

[@hotajax]

Can do the same thing with mineral spirits, a QTip, and mineral oil, at one quarter of the price.

[@ElHombreGato]

What do you do if you bought a brand new Colt and then when you get home you notice there's a big scratch from the factory?

[@Phantom-darkness]

I prefer to 2 drops on inside of the rails coat the entire barrel and wipe it off so it’s everywhere. Never had issues with that method yet. Use to drench guns in oil and that’s pretty harmful really.

[@paulreber9651]

What r you feelings on using gun grease?

[@kaioken1110]

Which model is on display here?

[@mikeclarke8275]

Very helpful

[@joseestrella4717]

Thank you for yours tips

[@billreynolds2221]

It has always amazed me at how many people take a firearm to the range dry.

[@sharma41089]

first time 1911 owner here i need a little advice about cleaning the weapon is it supposed to be disassembled and cleaned after every use?? i just fired about 20 rounds what would be the right way to store it after such use

[@mjm322]

Depends really on the conditions you shot in and the storage conditions(wet humid weather? Near salt water), ammo you are shooting (dirty or even corrosive if they sell it in 45acp) Me personally if I sweat a lot over the gun I’ll clean it, especially if it’s carried. But there can be such a thing as overcleaning. If it can be wiped down with an oily rag you should be good. Just remember to run a patch through your barrel post range session if you dot. Want stubborn carbon build up.

[@rtaggs8178]

Staccato uses Royal Purple motor oil as a break in. I like M Pro 7, its great and does not evaporate like the cheapo brands out there.

[@Nobody-xh5qe]

Awesome thanks 👍

[@rtaggs8178]

M Pro 7 runs circles around Lucas. I put Lucas on parts and it runs right off and does not stay.

[@itsonlyafl3shwound]

Couldn't even see the rails....

[@johnhuppert4043]

THANKS

[@TerryDactyl-r8n]

Remington gun oil with Teflon. Good stuff!

[@vicstartsmanmainchannel4813]

I like to use Gun Butter! .... pretty much the same stuff. Thanks. I do this Lub for both of my 1911's. TY!

[@LesRinehart-u6i]

The correct amount of oil here good job

[@paredg2]

Thank you! Just cleaned my RIA GI Standard M 1911 yesterday for the very first time (man that was a task). Anyhow, I heard that RIA bought the Colt plant, so they make their 1911's from the former Colt equipment. That's very cool. This RIA 45 M 1911 shoots better than my G-19....

[@johndilday1846]

Gerry Paredes I hadn't heard of this. Are you saying that RIA bought out Colt? Is Colt just a name anymore? Where are their firearms made then?

[@paredg2]

@@johndilday1846 I was watching a KZbin channel, forgot which one, they said there was a Colt manufacturing plant in the Philippines that made the Colt 1911 45's. That plant closed down, was bought by Rock Island Armory, along with the Colt equipment inside. So basically, the Rock Island 1911's made in the Philippines are basically Colt...the channel was either Hickock45 or Sootch...I'll try to remember.

[@johndilday1846]

Gerry Paredes Okay. Thanks. I was concerned there for a moment. With all the troubles Colt has had in the last decade, you never know...

[@brianb900]

I heard that as well about RIA. Let me just say that I had a RIA 9mm/.22tcm 1911, it shot well and it functioned well, I was pleased with it being my very first 1911. Then a few weeks ago I decided to buy a colt competition series 70 in .45, after one trip to the range and 100 rounds later I traded the RIA to a local shop for a colt gold cup trophy TALOR exclusive. The colts feel so much better in the hands than the RIA did. Just my thoughts.

[@firstimeshooter6590]

You are correct

[@totallyfrozen]

So how and why would you use a cleaner to REMOVE stuff that’s also supposed to LEAVE a residue of stuff (lubricant)? How does that make any sense?

[@monzon529]

Thank you. Do u have the link for the full disassemble of the 1911 i want to completely clean it.

[@carl-ok9gn]

no. try this nifty thing called searching for it.

[@monzon529]

carl yea but why waste my time in searching for it when the man can send me the link for it . Or do you have the link since you open your mouth.

[@carl-ok9gn]

@@monzon529 i already said no. and seeing how you've spent 2 months waiting and have written about 20 times the amount of words it would take to search for the video, it is clear i'm communicating with a sub-level of intelligence. have a good day.

[@monzon529]

carl then why respond. Pos and its called having a life.

[@carl-ok9gn]

@@monzon529 i find a small amount of entertainment seeing what kind of reply you'll post next. that is why.

[@redskullwarthog9385]

Thanks! To the point( lol )& quick GOD Bless Lucas products!

[@H82Miss]

What model is the Colt in the video?

[@Mike-up6go]

Looks like the Colt " Combat Unit Government " in .45 ACP.

[@34dawgsgo]

Have always heard you can't over lubricate. The wear spots are usually a good indicator.

[@charlespinson6693]

What about lubrication when your 1911 is your EDC?

[@jocool562]

How many times have you had to defend your self with it? Its probably just fine lubricating like this and maybe wiping off the lint once a week

[@bears8565]

When is the 4 inch king cobra with a adjustable rear sight coming out

[@TheColtFirearms]

It's out! kzbin.info/www/bejne/hmGWnqetqLObe5o

[@mopar21]

How about the 6"?

[@oftenwrong.]

Where is this weeks video

[@petelopez5826]

I just use synthetic 5w30 motor oil. If it is good for truck it is good for my gun.

[@BigCountry45]

Yeah, it works just just doesn’t protect against rust

[@General--Grievous]

This is so incomplete. You need to open the gun and lubricate a few inner parts too, as well as the rails

[@bretthl1]

Mobil Vactra is the only suitable lubricant for a semi auto firearm.

[@bears8565]

Need some new videos. Why not make a run of bisleys in 44-40 They would sale like hot cakes and colt still needs a .22 auto or revolver they would sale also .

[@oftenwrong.]

What’s wrong at colt?

[@oftenwrong.]

No video 2 weeks in a row. What’s happening?

[@EddyGee-z6n]

Generally

[@konovalov10]

I'm using a few drops of synthetic motor oil (same oil than in my car's engine. It couldn't work better !

[@royalloyalty8248]

Synthetic Transmission oil also works.

[@roberthall4093]

My good friend used anything he could find but motor oil worked great in I Corp in 1968. Lucas is much better I'm sure!

[@comodice905]

Bloke 1 drop is mas que nunca falta el disgusto

[@stijnvandamme76]

there's no black magic needed.. run it wet with FP10 on the slide rail, barrel hood,spring and barrel bushing. That does it All the rest just needs a bit of oil just to be happy, just wipe em down after you cleaned em with FP10..

[@onryoshinigami2891]

So could I, in theory, dunk the whole 1911 in a bucket of lube than wipe excess?...

[@Sounga74]

I use 10w-30

[@royalloyalty8248]

Why not Use 75w140 gear oil........ why such a thick oil?

[@sergionatali3071]

Strange you lubricate a gun without even field stripping it first.

[@masgrey9608]

Skip 1:30 past the Lucas commercial.

[@the_lion55]

Maybe a light coat of grease.... last longer on multiple days out in Afghanistan

[@clam741]

I watch guys like piew view and he soaks his guns . Not sure what your capable of but he can shoot like no other so soaking seems better than 8 drops

[@ninjaswordtothehead]

You guys ever get bored of shooting and need someone to test fire a batch, let me know.

[@zapa1pnt]

"How To Lubricate Your 1911" First, start with a product, from our Business Partner, Lucas Oil.

[@chiil034]

I lube my gun every 6 months or 3,000 rounds with 5w-40.

[@JeanPouliot-hk6rc]

Marvel mystery oil

[@jerroldkazynski5480]

To all: Amsoil has a couple of firearms-specific products. Me likey!

[@JD-tl7ld]

The fudge is this? If it rotates, oil it. If it slides, grease it. I might oil a lesser gun like that, but a 1911 gets better treatment.

[@oftenwrong.]

Amen! Especially if it’s a Colt

[@brianb900]

There’s no way I’m putting grease on my GCT or M45A1.

[@boomanh63]

That's what I was taught as well. My 1911's get a light touch of grease on the rails though I do add oil at the bushing.

[@RobM93784]

Why is Colt no longer using “F” marked front sight bases on your rifles, and when will they be used again? Selling a $1,500 SOPMOD clone without the proper F marked fsb isn’t exactly a “clone.”

[@pplrstrange]

Thank you. I will stop using bacon grease and buy Lucas gun oil. Ha.

[@abigailvella1257]

I don't find this product in Europe way

[@danqodusk8140]

Firearms are cleaned in step one, and lubricated in step two. For a product to claim it cleans and lubricates in one process is ridiculous. That claim defies logic and basic science!

[@nallie10]

what if you clean it really good and then put zero oil/lube on it? NONE!

[@Bream243]

If you are shooting 600 rounds a day, you must be in a war zone or a really bad neighborhood.

[@sunlight-sky151]

With some serious bleeding thumbs reloading mags

[@kenborgie1727]

I JUST SAW ON LINE THAT COLT ARMS HAVE BEEN PURCHASED BY CZ ARMS -- IF SO, COLT SURE IS NOT THE COMPANY IT WAS YEARS AGO, WHEN THEY MFG'D THE BEST ARMS THAT BECAME SO VALUABLE LIKE THE PYTHON AND GOLD CUP.

[@TheMrChozen]

To skip bs talk click here 👇🏼 1:30