Royal Enfield Bobber Project part 47

[@the1khronohs40]

Looking amazing, Craig! Brilliant!

[@trevwalker8987]

Perfection. Trev 🇬🇧.

[@abhaysharma6523]

Absolute beauty

[@ARIELVB]

That's one cool looking bike !

[@andrewbull3537]

Craig you said that you was too hot ,try putting a wet rag inside a baseball cap and put that on your head ,it lowers the body heat by about 2 or 3 degrees. Good luck 👍👍

[@peterwrench4416]

I hope Dan ends up entering that bike in some shows. It’s shaping up to be a trophy winner for sure! Been a great build.

[@GuitarDan73]

Definitely will be trying to get it shown or featured as much as will have it!

[@rjauto7215]

It's looking fantastic fella very well done 👌👌👌

[@johnimmins7302]

Bobber coming on nice Craig. Since your video trip to the new local motorcycle outlet, I have bought a G310r and now trading it in for a Yamaha Tracer 700. The wife has got the bike bug again and I needed something bigger. Being 73, I wondered if I could still get my 'leg over', the Yam but were OK. Keep up the good work..

[@artisticgoose2609]

Love your videos, keep it up.

[@crustyruss53]

Lovely bike, but should be a spring between the rear brake arm and the adjuster. Will return the arm if the brake pedal sticks. All Brit bikes have them. 😁

[@l.j.b9863]

Looking great, brass touches are superb, would love to see you turning some of these on the lathe

[@GuitarDan73]

Me too! I dont think he shows much lathe work and im intrigued how its done

[@irishmiketully6420]

Your attention to detail is incredible, real works of functional art...

[@ivormorris1917]

Looking fantastic 👍🏍

[@jasonsimpkin8621]

It looks absolutely gorgeous already you attention to detail is amazing I can’t wait to see the bike finish

[@raythirkettle4155]

Wee bit of that cotton covered flex down to the horn?

[@duncanc545]

whenever possible I mount bolts head up so gravity holds them in for you. Also if the nut falls off whatever its holding on won't fall off quite so quickly.

[@Wooley689]

Hey Dan, I know you are going to be so pleased with this bike, it is turning out awesome.

[@skandix]

Just a perfect build.

[@kendag2823]

Looking the business 👍😎

[@basilwatson1]

45 deg in me shed today ,, here in Japan !

[@Wooley689]

The guitar Machine key adjuster looks great. So does the Hepcats lettering, top notch.

[@waynehellyer2249]

Looking really nice

[@johnkinnane547]

G'day Craig bloody nice looking.........John

[@mattblackledge9068]

Coming together beautifully now. 👌

[@PaulSmith-iv5lh]

Will you show us the struggles of the wiring please

[@digger8180]

Attention to detail fantastic looking forward to the final reveal👍🏻👍🏻

[@gerrypowell2748]

If I could build such a beautiful bike I would want to keep it😢your details are astounding❤️

[@bradleyalexander5821]

I think the small bits and pieces are what makes this build super-special. 👍🏼 😎 🇺🇸 🌎

[@valvegeek]

Absolutely stunning, liking it more and more. Going to be really unique. 👍

[@TheOldaz1]

It just keeps getting better, nice green, just the right amount of brass, right tyres - thanks Craig.

[@MegaCountach]

Looking really nice Craig! Cheers, Doug

[@Trev350]

Your work is outstanding mate and this one is an absolute gem!

[@DonkySam]

I realy love your eye for detail even down to the smallest things that probably no one would notice but you.

[@mark3427]

I'm thinking those playing cards are in probably quite a vulnerable spot as far as wear from operating the brake pedal.. Hopefully I'm wrong , but it would be a real shame for them to suffer scuffs from Dan's boots.

[@decab8292]

What a looker ! Unlike myself in a wet tee shirt contest 🤪 As Jethro would say “That’s a proper job” Thanks for making my Sunday 😊

[@anythingoldmechanical]

Love the cream wheels.. sets it off. The pieces on the neck of a guitar that tighten up the strings are called Machine Heads. I used to buy wrecked guitar necks just for these worm drive mechanisms, to be adapted for model traction engine steering !

[@madcarew5168]

As an old Enfield rider(not Indian made!!) Looks veery niiiice!!!!!

[@Cosmic_Wizard]

Up until now, the little BSA was my favourite bike you'd done, this 'trumps' that. I also popped over to see Lord H do the signwriting. Sterling work from both of you 👍😍 BTW, I keep thinking that it would be great to get all of your bikes reunited for a meet/video 😎

[@robverheij561]

Dear Craig, what a great looking bike you are building. I think it will be a lot of fun to drive.

[@Dave.Wilson]

I wish the camera made my Horne look bigger!!, Bikes looking beautiful Craig.

[@garybooth2902]

As you were fitting the speedo cable bracket I was surprised, knowing what you are like for detail, that you hadn't rounded off the corners but you soon remedied that. Great work!

[@gregjarvis3288]

What a beautiful looking bike. The detail is incredible. I love how the slots in the horn cover line up with the barrell and head fins. Good job Craig.😊

[@simon2knine]

Another step closer...Looking forward to the wiring..

[@chriscrookson8524]

That's my Sunday entertainment sorted!

[@daveharriman2756]

Great stuff Craig, love it! and it's a 'Machine Head' think there's a Deep Purple album with them on the cover cheers, Dave

[@kurtpeil8433]

I like when you say I m trying to keep it simple 😂😂 nice one craig👊 seems you found the filler plug after all!!! Dan should be happy not to have to keep his big toe in that hole...

[@kermit-pw3wj]

Hi Craig hope your enjoying your weekend, Perfect to have a vid from you made my Sunday even more chilled

[@kennethszpindor1723]

Looking good Craig love all the brass bits on the bobber saving to get some for my triumph street twin and it is to god damm hot lol

[@michaelmiller5387]

The playing cards look great but I worry about the positioning next to the brake it the boots may rub against it whilst operating the foot peddle.

[@Dave-Lefever]

Cracking bike, can't wait to see it run.

[@maxgood4361]

Everything is coming together, a Very Nice Motorbike. Well done, Stay Safe.

[@Swoop10]

You could helicopter tape over the playing cards to stock his boots wrecking the paint during braking 👍

[@davidwhite9293]

Craig its looking fantastic bike you amazing matey

[@peterwardle572]

Craig, so where was the chain case filler plug!!!!, thanks for the good videos, including the trips out.

[@paulelberfeld8525]

More, more videos please Craig, love to watch you work matey.👍

[@tristanbuckoke9121]

Great work Craig. Keep up the amazing work cheers mate. Its call a tuning peg on a guitar. Take care. It's bloody cold here in Australia. Can't wait for the heat

[@edwardgriffin8092]

How do you put up with your neighbour making all that noise ?

[@troywee4774]

almost done mate! cheers.

[@mebeasensei]

Your taste is perfect...i love the personal touches and the cards based on Grand father's jacket - bang!

[@simonevans343]

I think I was one of those who mentioned the cards. Sorry I've always been a pedantic prick. Great bike

[@rogerfrancis65]

The guitar piece is called a tuning Head.

[@garrybowers2006]

Going to be one amazing bike looks great 👍

[@alexroca6981]

"Tuning Peg" ;)

[@crash11049]

another great video, Thank you Sir !

[@timlindgren8264]

Beautiful 👍

[@steveking4966]

"Machine head" ;0)

[@Marcke-tb1hb]

Hi Craig, with your obvious affinity with Enfield, had you ever considered customising a new Meteor? It seems to be selling like hot cakes all over the world and no one is customising them...yet. I believe you could be the go-to-guy! They have a similar appeal to the Bullet and mods made that could be put back to factory for warranty would be hugely popular (in my humble opinion). I know you’ve got loads to go at so just a thought. Best wishes.

[@AfricaTwin-Stuff]

Love the custom brass bits finished with some nuts. Oh, by the way... what happened to the give-away Suzuki? Did I miss that getting delivered?

[@bananabrooks3836]

Its not finished yet, no. plate bracket was last time work was filmed, customers bikes naturally take priority.

[@CloneDaddy]

Guitar tuning thingy = Machine Head.

[@GuitarDan73]

Even though we had both kind of 'forgotten' about a horn...it looks really cool!. I presume you have scrubbed it too or do they come like that? looks suitably vintage, love it. As does the little clip! awesome. I reckon the original speedo bracket hole had the speedo cable through it no?

[@GuitarDan73]

Yep you were right (of course!) Craig, that hole is deffo for a cable/rod to the front brake! ;) cybermotorcycle.com/gallery/bsa-1930/BSA-1930-E30-14.htm

[@seanstrehle6312]

Butterfly nut or wing nut

[@iamthefatstig]

I felt hot just watching!

[@guyseabrook3735]

That Springer makes the bike. Am I missing it or does this sled have a tool box?

[@arkangel13th]

I looked at the Royal Enfield 500 Classic parts catalog and Yamaha XT500 (because I have one)and both called the brass nut you wondering the exact name...the nut or the rod nut (nut,rod).Well,I'm a bit desappointed,I tought to see a more "scientific-kind-of" description for it. :O)

[@robertturner4225]

hey craig, can you tell what those tyres are?

[@kenshaw8100]

What year bike did you start with

[@dontask887]

Whooo hooov

[@poljames7492]

Fkn luvly

[@pushrodfury6644]

Could you please post a pic of Dan's bike on IG so we can see the real color

[@GuitarDan73]

Ill go post a pic on the doghouse fb page if that helps?

[@HepcatHarley]

First! :)

[@russparker71]

Amazing work on the graphics Ian!

[@HepcatHarley]

@@russparker71 Thanks Russ

[@banditnev]

If you ever get to Australia don't be here in summer 🥵

[@frankiepitt9135]

Especially not in Walk about creek!

[@raythirkettle4155]

Tuning machine.......meh