A VERY COOL Addition to the Cockpit [EP 143]

[@theromihs]

The little line lockers are a nice idea. I suggest that you glue a short length of rope to the lid, and to somewhere inside the locker, so that the lids won't end up floating away in the middle of the ocean some day...

[@chicobicalho5621]

I came here in the Comments to post the same suggestion, so, instead I will write -"great idea"!

[@robertmillen2967]

@@chicobicalho5621 I too

@@chicobicalho5621 Me too!

[@OudermansMichael]

Or some (little) magnets on the bottom? 🤔

[@chrisnelson7239]

A lanyard of some sort is a must and maybe magnets or velcro in the corners.

[@billywhizz6483]

Hats off to anyone who *enjoys* fairing and sanding :)

[@mxguy31]

Yup, spent many hours sanding a boat my Father and I restored when I was a teen... that experience just reinforces that I don't like sanding. Ha! Kinda boggles my mind when they say they enjoy it. 😂

[@jaygee5693]

Agreed, for most of us the "enjoyment" doesn't come till the end of the grueling marathon, then the sense of achievement helps to ease the aching muscles.

[@laynetimba4814]

Long fairing boards nickname is “Torture Board” For a reason

[@jedrinck]

I think it has become kind of a requirement to say that you enjoy your job. Why highlight yourself by saying you don't?

[@Normski2009]

loved the ending with the sound of "sanding, sanding, oh and more sanding" 😄

[@CentristRN]

That sanding is a brutal amount of work.

[@danknox9986]

OMG. I can’t believe those two girls said they enjoyed sanding! That’s amazing! I’m sure they are wonderful at it.

[@glowingfatedie]

They sure have a different attitude about the "torture boards!"

[@alangurman3961]

Are they friends or paid workers.

[@graphics80]

​@@alangurman3961Paid

[@01AceAlpha]

Tether the lid to prevent losing it and use a rare earth magnet to secure the lid when it’s in place.

[@robertmillen2967]

Good ideas

[@thetangoman]

3rd’d! Magnets would be a great addition to all the hatch lids / locker lids in the cockpit just for added safety of not leaving a gaping hole if the lid flies off.. easy to hide / inset to give that clean look

[@Valerie_Dawn]

Here is a little trick I've seen another sailing channel do... When your lines get salty and need to be cleaned, you can put a plug in the drain hole and add water and soap to the locker to clean the lines. 😇😉You're very welcome!

[@evangatehouse5650]

Fabric softener is usually what is used to make your ropes soft again

[@erikjalefors9377]

Great line lockers! But those lids need some kind of line to tether them to the boat !!

[@solskengroupllp2758]

The hatch thingy: very clever.

[@adrianianna2868]

I've always called them torture boards & never thought of them as anything related to fun!

[@OscarHendzCano]

Nice to see young people enjoying hard work my kids are allergic to work

[@robertmillen2967]

Time to go primitive camping, no work no comfort or food etc

[@HOSER227]

Great idea! Might want to consider adding a grate/drying rack inside the storage to facilitate drainage, to allow air ventilation around wet lines and to prevent the lines from clogging the drain holes! Could use cheap PVC piping from HD to build the grate!

[@andrewmoylan6295]

It's such a cool idea to have these line lockers Matt, it's amazing that more sailboats haven't got these built-in. Good choice to go with the fairing crew as well .

[@boatbikemike8571]

I can’t wait to see Duracell all shined up again. Having seen her as a fresh build many years ago, it’s great to be able to follow her transformation!

[@anthonydefalco4205]

Sanding....the most important yet most tedious work....bless them

[@torstenhansen4308]

As Mads would say over on Sail Life, “It’s tedious but at least there is a lot of it” 😊.

[@briantaylor5371]

Best builder on KZbin, you deserve everything you earned keep building your an inspiration to everyone that watches your channel.

[@sailingmariposa7887]

Wonderful little addition to the cockpit, some sort of tether on those lids will be a must, maybe a short piece of shock cord that would actually hold the lid down. I’m sure Matt will dry the lines out before they are stowed for any period of time 👍

[@chrictonj9503]

Love the crew that came out and up to help you out. "Nothing ... half so much worth doing as simply messing about in boats."⛵

[@jimedson3853]

Interesting interviews with the fairing people. I don't think I could do a job that required putting it on then sanding it off several times for that many years. Thanks for the video 👍👍😁

[@RobPattinson-ui2qh]

Very cool lockers. I have visions of them sailing off on their own adventures in rough seas. Perhaps a tether? Or maybe strong neodinium magnets in those corner G10 brackets? Well done getting help sanding. That is such a monumental job and key to the look of the boat when you're all done. After all that work it's worth it to get it perfect.(EDIT: I shoulda read the comments before commenting, 149 people beat me to it.)

[@imabeliever244]

That funky, groovy tune that was playing while Matt was glassing the hatches and lids reminded me of something one might have heard on a 1970's, big city, cop/detective tv series. Right on, jive turkey!

[@ArcticSeaCamel]

Great little addition and great progress with the hull prep. Cannot wait to see the hull faired and painted! 😍

[@frannappe]

maybe later you can attach a little paracord line to the lid, so it doesnt get lost / washed down / flown away. And can even be stored away in the same locker diagonaly if needed.

[@leonply]

It is always satisfying to see professionals applying fairing compound, as they use enough to actually end with a quick, smooth and fair result, without taking weeks or months in a misguided attempt to "save weight." Speed and accuracy wins out every time, and actually ends up costing far less and doesn't add much weight in the long run.

[@briancochran8356]

Not a bad idea. Suggest you put some kind of attachement on the lids to keep them from being knocked or blow over board. Maybe a line that is attached inside the locker and comes throughthe grab hole with a big knot. don't forget to epoxy the drain holes.

[@williamhamill813]

I use an air powered sanding board. You need a lot of air but it makes the work of 5 people hand boarding.

[@TheDuracellProject]

they do have one

[@billradford2128]

"I really love sanding!" Words not often heard on sailing channels! 🙂 I love this project for the sound thinking and design skills as well as the obvious construction skills.

[@ElleKendra]

I've done some sanding in my day, but that does not look like something I'd enjoy too very much. Props to this ladies and the team!

[@davidboyes1941]

Once she’s all ferred up and sanded smooth what will the end finished paint look like? Like a new off the shelf boat? I’m intrigued as to how a modern boat is finished as it sort of just looks like a layer of plastic not paint? Loving coming along with you on this journey and can’t wait to see Duracell afloat!

[@Johnny-Too-Bad]

Loved the sonic outro, very hypnotic. lol

[@anthonysutherland9487]

With your line hatch you need to put a loose cord that allows you to remove the hatch cover but will prevent it from being lost overboard if it is dislodged accidentally or by aware or if the lines are pulled out quickly. The cord could be attached inside the locker and the underside of the hatch.

[@103SideProjects]

It would be amazing to see a full size wire armature of your boat with all the templates in their place within the framework. I probably need a nap. Thanks and best wishes.

[@bobflores]

Perfect job to hire out. Looking forward to seeing Duracell all faired out and in a coat of primer.

[@SammyChenford]

Consider putting those hatch covers on hinges as it would be a shame for them to get lost overboard!

[@mattdouglas5570]

There something about watching other people fairing a boat so so good to see they enjoy their work, will definitely show in the end result

[@neilrush659]

Kool projects all round. The little storage boxes for the lines is such a clever idea, ropes can be so annoying in the cockpit and dangerous too.....good job. Great filming as always, nice episode. Sending good energy your way....Neil

[@matthewcampbell7153]

Hi Matt... those line-lockers might benefit from a couple of magnets to hold them in place. Sometimes strong winds or typhoons can suck them into the air and away.... Just an idea.... Great work...

[@CharleyGeorge]

Hey on those lids for the rope lockers I think it would be a great idea to put magnets in the corners. I would be afraid they might just pop out in inclement weather

[@TheDuracellProject]

yes to magnets

[@irisgilliard4955]

What I enjoy most about these episodes is when I get to see my GGRANDSON. He is growing so fast and looking forward to seeing and holding him later this month!

[@TheDuracellProject]

we're excited too, Mimi!

[@Brian-os9qj]

Talking dedication, this group nails it. Anticipating great results

[@erictakakjian6021]

Love the line lockers, thats a great idea!! My hat's off to the fairing crew, longboarding can be brutal!

[@fokko1976]

Some amazing work done, it’s going to look awesome! And I love the fact that your videos are now available in 2160p! 👍👍

[@dennisash7221]

There is something soothing and satisfying watching and listening to sanding 😊

[@jackwalby6257]

Yeah longboards!!!

[@timmiller4875]

Great idea. Put a tether on the underside of those hatches! That close to the aft of an open transom they could easily go over. Drops, a hard knock when heeled, or a 3 year old Matt wanting to see if it floats and you will need another one. Or make a spare lid with scrap now while you’re doing glass work and stick it in the locker. Future reference, round lids can’t fall into the hole, no tabs needed.

[@dustybikes86]

it would be super slick to add some magnets or some way of keeping those locker covers from coming up or rattling around

[@TheDuracellProject]

Exactly

[@Tomm9y]

I hadn't thought of the skill required to apply just enough fairing compound of the best consistency and mix, then to apply it neatly, so you use the least material and time to achieve the finish. Thank you for that snippet, one of many occupations that seems just like hard work, and it is hard work, but the skills are most significant, good to hear it is fulfilling too. It's nearly 20 years since my little boat was last repainted beautifully and it reminds me to care well for the rest or her. Sure its a small thing, but looking after a boat well is many sided.

[@amunderdog]

Needs to be super smooth for the Royal Purple paint.

[@nfinitymarine4466]

If I found myself looking for a forever girl again, I'd settle for nothing less than a girl that loves sanding. The world needs more of those women.

[@patchmack4469]

how refreshing to find folk who love sanding, most people will avoid it where they can, its a love hate relationship with me, but when its something for me, it has to be right, and worth the sanding to get the best finish

[@daviddelrosario828]

I think those little lockers for the lines and sheets are genius!

[@ebutuoyotwen]

Like the line lockers, but, in the nicest and most helpful way possible, the sanding was a little loud at the end of the show. Loud for ear pods anyway. Cheers!

[@CaptainRon1913]

That long board sanding is exhausting

[@PaulieB-wi7mx]

This episode reminded me a of a person I met a few years back, that built a catamaran (over 40ft) and called it *Grit*. The reason, he had gone through over $10K in sandpaper building the boat.

[@h.rutten2187]

It’s not the easiest way to cut a hole for a hatch/ lid, but a small angle of lets say five degrees going inwards cut with the saw blade, gives you a great hatch/ lid that doesn’t fall through the hole without having to glue in an edge or corners. There are many ways to make an efficient hatch/ lid, but as a thing of beauty I prefer the ones with an inward angle. I just like the simplicity of it and its shape has something that design wise appeals to me, simple but effective. The boat starts to look good, I’m curious at the keel design and when the time will be there for the keel to get attached.

[@MaryK4242]

Watching that sanding was making my arms sore. Another great video! Thanks for sharing.

[@davidmcgee2129]

I would add a fixed lanyard to the underside of the hatches that secure them, with sufficient play, to the underside of the locker … so you don’t lose the hatches overboard.

[@ED3]

I like the line locker. Clever use of space. With angle it should have great drainage too. Simple but elegant solution.

[@pkpsail4441]

Brilliant, great spot for line lockers, would be good to minimize the hole area in the lids, no center hole, just open from the aft slot or lift on a line.

[@culturevulture3382]

I enjoy the brief nature interludes...

[@bellofello1]

I think that is a very slick idea as well 👌👌

[@Viendopiedra5029]

Groovy hatch music man

[@gregepp3082]

I love the rope locker idea. I can't stand lines all over the cockpit.

[@Tedroy]

Ok, now I can dig the Afrobeat stuff. Thanks!

[@FLHR2014]

Caught myself being entranced by the sanding.

[@skyd8726]

Great woek! I'm going against putting a "little line" on the hatches 😮 by guessing they will fit through the hole and be stowed in the locker when sailing??

[@Macvombat]

"Line is almost liquid" -Matt, 2024

[@joecioe8566]

Short and sweet, great video work just the right amount of sanding.

[@beavercleaver6294]

Great job on the locker Matt. 🤠

[@markthompson9914]

I got t hand it to the fairers. I’ve sanded cars on little areas, so that seems such a MONUMENTAL TASKS it blows my tiny British mind 😂. ✌️&❤️ from 🇬🇧👍

[@gatecrasher1970]

yeah me too i have sanded hundreds of cars including antiques and it really aches after a while doing it by hand

[@williamyamm8803]

Excellent, as usual ! Greetings from France

[@thormidthagahast8914]

A chain or rope "preventer" to stop loss of new sheet locker hatch? Perhaps some hidden, flush mounted magnets to keep the hatch in place?

[@poruatokin]

If you haven't already planned it, those rope locker lids need retaining straps of some type otherwise you are going to lose them.

[@SergoYachting]

чуть лайк не забыл поставить cool !

[@terrysmith128]

Banjo music great Love your show

[@RandomPrecisionMotors]

Maybe y'all can lure a Sasquatch outta those Woods to help with Prep, just make sure there's plenty of Jack Links handy...j/k She's coming along nicely!

[@PAINFOOL13]

Line locker is super nice, great idea 👍🏻

[@ThoughtfulWander]

Great episode! Thanks for sharing! More progress! Keep rolling Duracell team! 👍👍

[@davidcash6809]

Did anyone else notice the tiny spider crawl onto the deck under Matt at 2:44?

[@bosch917]

Love you Guys ❤

[@thomascallaghan5988]

Great video

[@clide427]

I hope we get a safety inspector appearance on this episode 🙏...🐈...🐱...😊

[@teresalewelling7318]

Thank you so very much for sharing this with me. I enjoy your videos and seeing the work that y’all have done. It’s looking so beautiful.

[@MaShcode]

That was an embarrassing amount of thickened epoxy albeit satisfying to watch. ❤

[@RobotRangerGuy]

Oh glorious sanding :)

[@JonathanVanVuren]

Thanks!

[@TheDuracellProject]

thank you!!

[@jonnybravo3606]

Your baby is great. He's very cute and a big guy.

[@jeffhudson4817]

Coming along. Stay safe guys….

[@dcallan812]

Great video 2x👍

[@Cadcare]

Starsky and Hatch (5:12) judging by the music choice. 🙂

[@garyregan4871]

pretty slick

[@MH55YT]

Pretty cool

[@FunsongsMusicByPeterRahill]

5,111th tag-along looky-loo view about to set sail... 3:11 - TBH, to the phantom shipmate, cutting that many large holes in the deck sure LOOKS like a compromise of the strength and durability for an ocean-going vessel that'll take lots of pounding and abuse. But hey, you know what you're doing; right? 12:00 - but the stow-away of lines, keeping 'messy stuff' helps any OCD-types who like things 'ship-shape', clean and orderly.

[@fortza11]

In your defense, you said "big holes", they are small holes 🙂

[@jaeorumn4242]

I thought he was just talking about THAT week's holes 😂

[@robertbenjamin7728]

Any new hole you have to drill into your boat is a BIG HOLE

[@FinleyGleeson]

keep the name duracell

[@DD-xx8wh]

great progress lot's of details....and still time to move nav station to pilot house?

[@DanielChristianK1]

Instead of glueing cleats in, did you consider just cutting out the hatches in an angle, like an upside down pyramid, so that they are narrower on the underside/inside and naturally prevent the lid from falling in?

[@nytrocircus]

Are you going to put magnets or a tether line, or on the rope locker lid to prevent it from escaping?

[@TheDuracellProject]

yes

[@martinbeaumont1135]

A team of ‘oh glorious sanders’ I know someone in Florida that might like their help 😂

[@lec8598]

Hello Matt, you are doing a lot of vacuuming pressing. What kind of pump are you using? Thanks.