Follow me on Instagram @ddurb Thanks for watching! Stay tuned for more!
Пікірлер: 87
@xxvodanhxx4 жыл бұрын
This last time I used it, it was extra dusty. I had some spare foam tape that i added to the lip and it greatly reduced the dust. Start slow so it gets is starting track in the cut or else it will stall and unravel the blades. The clips that hold the spring chamber broke when I pushed on it too much, but it still works.
@irishfreetimes7504 жыл бұрын
Very informative and thanks for clarifying what it can be used on - appreciate the info and keep up the great work - thanks.
@Camerasdontlie9 ай бұрын
Hello from Dublin Ireland 🇮🇪. I had one of these back in the early 2000s it was used for audio Applications ceilings speakers were the order of the day. My one went up to 12 inch’s for bass ceiling speakers. I can’t find something that will do the same job.
@jimoaksnj2 жыл бұрын
Had bad luck with this tool, blades dulled after 3 holes in drywall ceiling
@Peter-9763 жыл бұрын
Great demo!!
@brancollingwood83347 ай бұрын
I was putting mine together to see how it works I put the drill bit in and I did not put the cutters in and now I can’t pull it apart. It is all ready to use but the blades are not in. It is totally stuck, how do I pull it apart?
@justanotheruser1014 жыл бұрын
A 6 inch hole saw in Australia would set you back well over $150 bucks.... fml
@newport55043 жыл бұрын
No..
@brendanfogel45735 ай бұрын
Can you use this on a pre existing hole to make a hole bigger?
@TheDurbinCompound5 ай бұрын
No, it will not work in that application. You can however mount a piece of wood in your current hole to start the drill bit into.
@kingofthecrease305 жыл бұрын
interesting....i never knew milwaukee made this...but next time can you show a close up of the tool ?
@TheDurbinCompound5 жыл бұрын
Yeah it’s a pretty sweet offering from them. I was impressed!
@christopherbalderston52285 жыл бұрын
Cool tool! Thank you for sharing.
@TheDurbinCompound5 жыл бұрын
Thanks for watching!
@Smedley613 жыл бұрын
How far does the drill bit extend beyond the blades? I have to cut a hole in drywall that has a PVC pipe right behind it for a bathroom light fixture. Thanks.
@eraygo Жыл бұрын
Out the box it's not sharp. I tried using it on 5/8 drywall and it struggled.
@user-th3dl8gl4o Жыл бұрын
Is 7 inch hole max cus I need 12 Inc for speakers
@Peter-9763 жыл бұрын
I get really mad when people lie to my face but in your case I`ll let it slide cause you owned up to it.
@TheDurbinCompound3 жыл бұрын
😂🤣😂 i don’t even remember what I said in this one!
@Peter-9763 жыл бұрын
@@TheDurbinCompound you will laugh if you play the first minute.
@TheDurbinCompound3 жыл бұрын
@@Peter-976 yep! I sure did say that didn’t I!
@glennrideout2499 Жыл бұрын
I’m heading to Home Depot 😅
@unrelentingchemistry68772 жыл бұрын
great video here is another way
@meangreen73893 жыл бұрын
Can this hole saw be adjusted to different sizes such as 4 1/4” or 6 3/8” or just 2”, 3”, 4”...7” only. Oh wait, just saw the packaging which stated 1/4” increments. Thanks for sharing.
@TheDurbinCompound3 жыл бұрын
Was just about to answer you! Glad you got it figured out
@FlipTheFlapjack Жыл бұрын
4 years later.. theyre short of $50 now. Still id take an adjustable over buying a dozen different hole dozers
@westcoastpacoimacalifas9 ай бұрын
Still worth it than spending 140 for a kit
@adamaustin33734 жыл бұрын
think it will drill about 30 holes before dulling out?
@TheDurbinCompound4 жыл бұрын
In drywall and ceiling tiles. Yes.
@romespc3 жыл бұрын
This thing is trash, started ripping my ceiling tile, it doesn't cut clean at all.
@UsHunoda Жыл бұрын
Possible user error?
@marilynbennett98682 жыл бұрын
Would this work on a rainharvest tank?
@jasonclark7754 жыл бұрын
Think it would work with fiberglass?
@TheDurbinCompound4 жыл бұрын
I wouldn’t think so.
@MrUGo74 жыл бұрын
2:42 no f*cks given. Lmao
@USONOFAV3 жыл бұрын
can I use it with impact driver?
@averagerider923 жыл бұрын
Will this work for thin aluminum sheet metal?
@TheDurbinCompound3 жыл бұрын
No it will not. These cutters dull out in wood
@sages1013 жыл бұрын
I'm looking to cut a 6" hole in my cargo van to fit a porthole window. Would you recommend an adjustable hole saw? or fixed hole saw? would they even be able to cut through sheet metal? Cheers.
@TheDurbinCompound3 жыл бұрын
No. These do not cut through anything but plaster and gypsum based products.
@sages1013 жыл бұрын
@@TheDurbinCompound ah I'm probably better off with a jigsaw then. Cheers :P
@BsBucWiLD2 жыл бұрын
2:40 shit goes flying and he keeps going only like nothing happened... LOL I subscribed for this reason and the fact that the review was good as well And then you said that things made in China are better than anywhere else... dude wtf?
@TheDurbinCompound2 жыл бұрын
I don’t know where I said that! Sometimes I just spew words out. Hahahaha
@BsBucWiLD2 жыл бұрын
@@TheDurbinCompound 7:12 about China, lol
@carguy13124 жыл бұрын
Cut 4 holes in my ceiling and the blades are already flat, and catches on the edges causing tear out. .
@TheDurbinCompound4 жыл бұрын
Wow, I had great luck with the tool! You should be able to sharpen them fairly simply
@carguy13124 жыл бұрын
TheDurbinCompound I wish it were that simple. The blades are literally ground down almost an inch shorter than they were new! They didn’t just dull. Anyway, going to see if it can be returned tomorrow - if not, I’ll be contacting Milwaukee. No tool should require as much maintenance as this would.
@TheDurbinCompound4 жыл бұрын
carguy1312 agreed! Oh goodness. Are you just cutting drywall?
@mv87714 жыл бұрын
@@TheDurbinCompound lol, sounds like he is trying to cut plaster (lathe & plaster)
@joshroberson24583 жыл бұрын
Can it cut through mdf
@TheDurbinCompound3 жыл бұрын
No
@Btu5553 жыл бұрын
does this work on blaster?
@TheDurbinCompound3 жыл бұрын
Do not recommend for plaster
@JB-he6ek11 ай бұрын
What about enlarging doorknob holes
@TheDurbinCompound11 ай бұрын
Not possible, this is for drywall and ceiling tiles only
@brianbell541 Жыл бұрын
Glad it never hit u in your face
@tberlin543 жыл бұрын
Can it be used to expand an existing hole? For example converting a hanging light to a can light.
@ejperez194 жыл бұрын
Do you have a link to where you bought it?
@TheDurbinCompound4 жыл бұрын
2 in. to 7 in. Adjustable Hole Saw Cutter www.homedepot.com/p/205744284
@saucertv50813 жыл бұрын
I just bought one and it broke the same day not worth it
@flexclips18493 жыл бұрын
how well does it cut compressed wood?
@nobutur2 жыл бұрын
6:14
@randywilliams62483 жыл бұрын
It's too bad this won't work with plaster walls 😫
@djbarela43 жыл бұрын
Will it work with plywood
@TheDurbinCompound3 жыл бұрын
Nope. Not a chance. Has to be ceiling tile or gypsum board
@flyinjam4 жыл бұрын
Do you know if this could be used to cut circles from a thin layer or cork?
@TheDurbinCompound4 жыл бұрын
Yes I think that would probably work. It may pull some of the cork apart. The best thing I could think of doing is sharpening the small knives on it for a cleaner cut.
@markrob97523 жыл бұрын
Can it cut metal
@TheDurbinCompound3 жыл бұрын
No
@adamfisher26484 жыл бұрын
Made better in China than in the US?? Wow.
@913263 жыл бұрын
We gotta get off the made in China sucks BS. If this was made here, it would cost $250. We use China to do stuff that we don’t want. And they do it well.
@ajfisher13 жыл бұрын
@@91326 No, we really don't need to get off the China sucks BS. They are a communist country that enslave their people and try to rape the American markets with outrageous tariffs. Have since at least the year 2000 when I learned of it. People will spend $200 on shitty air Jordan shoes but not spend the extra money for American quality? Sounds backwards to me.
@Yellowspider17763 жыл бұрын
32$ now at my Home Depot!
@antonionance2465 Жыл бұрын
Mines cost 40+
@Est91.3 жыл бұрын
This will only work with Sheetrock, don’t purchase this if your going thru plaster
@Jordaneal2 жыл бұрын
You didn’t watch the video all the way through because he says that at the end.
@Est91.2 жыл бұрын
@@Jordaneal he never said plaster, listen again
@Jordaneal2 жыл бұрын
@@Est91. He said what it is used for, and everything else is assumed that it will not work. NO U LISTEN lol
@Est91.2 жыл бұрын
@@Jordaneal you just said he said in the video that it won’t work on plaster and now you’re saying its assumed it won’t work? Bro it’s okay to admit to being wrong
@Jordaneal2 жыл бұрын
@@Est91. Says the guy who can't spell "through". LOL give it up. And yes, when someone says it a product is used for A or B it is assumed they mean the product is not intended for C (plaster).
@abecx Жыл бұрын
This thing makes a mess. It’s totally not contained. Your demonstration should add mud and paint. It’s gets everywhere.
@SpacewolfDan3 жыл бұрын
i just read the amazon comments and they are rubbish
@TheDurbinCompound3 жыл бұрын
I’ve use this all the time. I’ve never had a problem with it. Used it last night with no issue. Just need to have reasonable expectations of what it is designed for and use it according.
@kashmoni10853 жыл бұрын
Okay. One thumbs down just for you buddy😁😁
@chadhinton93202 жыл бұрын
Can u cut 1/4 plywood
@TheDurbinCompound2 жыл бұрын
Nope, only drywall or ceiling tile. No plaster or plywood