Default BIOS Settings Hinder Your Gaming Performance: Project SeVeN

[@willmunshower8401]

Well, then. I am most disappointed. I stumbled onto this video, followed his advice, and went looking for future episodes. I had subscribed, and then saw there's been no additional content for 6 months. Great editing, great audio, pleasant English voice, and well structured chapters. I'm going to stay subscribed, and hope to be notified of future content. You're sorely missed, my man!

[@ChancellorM1YT]

he's dead

[@oggoth8923]

@@ChancellorM1YT how do you know

[@srijitiitb3848]

@@oggoth8923 due to corona i think

[@Im_SSJay]

@@tehf00n people are so weird

[@S0RR0WSPELL]

Was thinking the same thing. Still gonna subscribe

[@spyderftw]

2 years later and still helps, thank you man!!

[@BillWilliamson420]

i’m new to pcs after you flash bios can you access windows ?

[@knaki2521]

@@BillWilliamson420 if you do it properly on a pc that alrdy has windows and is set up, yes (since it only changes the motherboard system). If it's a new build, no, you would need an usb with a windows boot ready

[@MrTrytiped]

I know this is an older video but a bit of advice. The overclock profile from these companies often runs with some very high voltages. I would HIGHLY recommend doing some stress testing while monitoring the temps to make certain your temps are reasonable. High temps can lead to your cpu thermal throttling; leading to worse performance and shorter lifespan.

[@alexzero3736]

Actually, modern motherboard wont allow this. System wont start if throttling is detected.

[@DanicolasolGamingTVuruguay]

A constant 1.4 v on a "Regular use" CPU is Insane... I was able to Run my Ryzen 7 2700x to 4.3ghz constant Rock steady, no crashes with a 1.375v and every time I tried the CPU Boost the V numbers where all over the place along with Temperatures. From 1.425 v to Red numbers on HW Monitor. You are 100% right there.

[@zndxt1970]

My asus on extreme tuning was soo loud doing nothing in windows

[@MrTrytiped]

@@alexzero3736 Throttling occurs when temperatures get too high. The motherboard detects this and lowers the clock/voltages to protect the cpu. Still occurs on all modern day systems.

[@MrTrytiped]

@@DanicolasolGamingTVuruguay I get some crazy temps with the cpu boost especially when running prime95. Good thing some of us pay attention to this cause some users would just take this videos advice without hesitation. Sadly I didn’t hit the lottery on my i7-9700k any reasonable voltage quickly led to instability…

[@Sir_Saul]

Very clear and informative, I would watch your BIOS OC guides over manufacturers videos any time

[@ightimmaheadout290]

bruh im missing most of ur settings

[@geogenocide]

Same got a Z790 msi mobo with an i9

[@ightimmaheadout290]

@@geogenocide mine is a msi mag b650 tomahawk with 7800x3d

[@Alex-uk8ib]

💯💯💯

[@trevorbarney1796]

Update your bios to the latest version 🤯

[@ightimmaheadout290]

@@trevorbarney1796 already did 🤡

[@Utachan101]

ty so much for this, got my PC back from the shop after upgrading and had a heart attack at this menu coz i had no idea what to do 🤣

[@MainYotubeacct]

They should’ve set this up for you? Or at least downloaded windows and the software for ur components of your computer kinda did u wrong 😂

[@Utachan101]

@@MainYotubeacct nope, i had to scramble and get windows to download 🤬 EDIT- i literally paid them $150 labour fee too :(

[@mr.niceguy2337]

@@Utachan101 wtf 😳 what kind of a shop is this

[@Utachan101]

@@mr.niceguy2337 ikr!! like sir i went to you coz idk how to do anything and they weren’t keen on downloading windows for me and explained how to do it myself but like …. you could of done it and just charged me extra ….

[@Flakka-]

Great video and explanation without ever being boring or too complicated. Great audio aswell. Thanks :)

[@user-tp5yb4hr4w]

can't say the same for myself, but this is likely possible due to my anxiety of this stupid little situation messing with me right now. i probably need a new some kind of fan, but i thought that maybe it could be fixed by messing with with my BIOS and adjusting my fans speed. because my damn PC will restart when i play any demanding game, i think it's over heating, because i can make my room really cold and it will run just fine, but if it gets warmer the damn thing reboots while i play and that gets super annoying.

[@breakingandbuyingbikes]

@@user-tp5yb4hr4w add more fans

[@user-tp5yb4hr4w]

@@breakingandbuyingbikes i think i have to get some new ones, one of them squeaks sometimes, i have cleaned it, but it still happens every once in a while. lately it hasn't been having the overheating issue, i guess it's because it's the colder time of the year where it never reaches the point where it's too hot and restarts. it was doing this about a month ago, but now it works fine. but i guess i could get more fans, i have wanted to install something experiential like a vacuume that sucks the hot air out of the tower before it has time to settle, maybe it's a stupid idea lol.

[@Physics072]

@@user-tp5yb4hr4w Run Stock don't over clock. Find stability first, once established you can just enjoy the games. Or if you like to tinker get the right tools to check temps, voltages and stress testing.

[@user-tp5yb4hr4w]

@@Physics072 yeah i found out my issue was the power supply was dying, it was old but i also wasn't as good at cleaning when i should. recently i purchased one of those rechargeable air compressor things so i can properly clean my PC, because the cans never lasted long enough and so i didn't clean as often as i should, now i can clean it any time and not run into that issue so the hardware will last longer.

[@bikerdup]

My MSI Tomahawk B450 motherboard has a "Game Mode" setting for CPU Boost. Turning that on gave a 600 MGZ boost and resulted in the after-market CPU fan going nuts. Sounded like a 747 firing up for takeoff. Went back to the "off" setting pretty quick.

[@ZackZ-mg9uq]

I had a 19 watt gh19 installed DIRECTLY to the back of my rh14 in spite of the contrary. No wonder it wasn't working LOL

[@randy89555]

🤣🤣🤣

[@davidegagliardi1043]

bro for real, strangers from all around the globe are waiting for your contents, pls come back we need to learn !!

[@garyr7027]

Everyone has their own liking for setting up fan curves, but what I did was set the CPU fan curve and one fan port curve to match. Then used a 4 pin PWM fan controller that I hook up all my fans then hook the controller up to that one fan port on the board. As the CPU fan rises so does all the other fans to match. I know some claim negative air flow is best, but for me I'd rather have zero air flow restriction as much as possible... but that's just my opinion.

[@alexzero3736]

doesnt it make airplane noise?

[@garyr7027]

@@alexzero3736 oh no, it's not that loud. At full speed, it's comparable to small room fan on low... approximately.

[@juanshaftpatel7488]

ok boomer

[@manhandler]

The reason to have fans separate is to be able to set a neutral pressure in the case. A little positive pressure is best, but a negative pressure bad. And a neutral pressure is what you should be going for.

[@manhandler]

A neutral pressure also keeps the system cleaner.

[@polishcow968]

I dont have half of these setting options

[@swizzler8053]

Thnx for the helpful tips. Keep up the grind and keep up the great work.

[@TheGrayingTech]

Appreciate it!

[@Brandonhatesmayo]

Great video, answered my question in 30 seconds, stayed around to learn some more.

[@CloudsFPV]

Awesome video, it starts right away and don't have to sit through some cringy intro. Thanks!!

[@XanderGamer85]

Beautiful guide! Well explained, I'll also share it on my channel for my motherboard 🤩

[@RinxSyzygy]

nobody asked

[@DriLL3iT]

I'm so happy you are using the same motherboard as me. Thanks for help!

[@wayneomeara7874]

Dont forget that you need to run your FCLK at half your memory bandwidth example (3733Mhz 1867 FCLK) if you're using a ryzen CPU. Undervolting is typically fine it's when you start overvolting then it gets dangerous. Also overclocking memory and messing with timings can cause corruption.. I've had to run a few sfc/scannow and DSIM restore a few times because of instability crashes lol

[@appletea9344]

Ok im not a tech guy but who the fuck makes their memory run at half the performence?

[@Kben01]

@Sunkeny okay, but that’s only on ryzen.. this was specifically an intel chip. Why would you bother to put this info here when it doesn’t apply at all?

[@bubbleboy821]

I have a Ryzen chip and I thought it was helpful

[@Jeremy_Watson]

@@Kben01 To advise someone who has a Ryzen CPU probably.

[@owen.8580]

@@Kben01 he literally says if you have a ryzen cpu

[@jedielder7970]

Computer nerd and motorcycle enthusiast... I can relate! Thanks for the video.

[@RyanRak2790]

Just stumbled upon this video but holy amazing video. 🤘🏼🤘🏼

[@RealM__]

Small warning to future people: XMP is an overclocking feature and turning it on can cause system instability, void your CPU warranty and may require some fiddling to get just right. Really make sure you know your CPUs maximum memory speed, as well as your RAMs max speed and its compatability (if its Intel XMP or AMD Expo). In my case, the default XMP Profile boosted the memory speed too high and caused some LEDs on the Motherboard to turn on, while also significantly slowing down boot time. And for general purpose computer usage and normal gaming, you usually don't need XMP enabled.

[@davidjames4583]

Wow I'm very glad I came across your channel. Thank you for this vid. 👍 !!!

[@maloc1166]

THERE IS A ISSUE WITH SOME BIOS BEWARE!!!! Always boot after enabling XMP back into the bios and check IO SA or on 12th gen intel VDDQ. Some bios grossly over compensate well over 1.25sa or even higher vddq. IO voltage or vccio is rare to overshoot but can happen. Always check

[@CornflakeMom]

What do you mean? whats boot?

[@maloc1166]

@@CornflakeMom when your system reboots as in starts up after exiting the bios go Strait back into the bios by spamming delete or whatever button on your keyboard it wants you to hit

[@Alex-ii5pm]

@@maloc1166 I had this happen on my gigabyte z490 aorus elite, 1.35sa voltage with default xmp, had this running for a few weeks and didn't know until I checked for something else in the BIOS, had to manually set it back down. Could have degraded my CPU memory controller but not sure. Seems OK now on 1.1v

[@mazz85-]

If you have overheating issues, you can trey tuning power options in windows for the cpu usage. Also would suggest to clean and reapply the thermal paste. For some reason i always lower it down to 98%, giving it some room, since i mainly play older games.

[@cactusstudiossouth]

HELLO MAZZ! I commented on The Grayes Video looking for advise but he never replied!!! So am posting the same question to you Sir! You are my go to guy for MSI! I recently built my last system with an MSI Z390-A Pro with an Intel Pentium Gold Coffee Lake G5400 Duel Core 3.7Ghz Processor! 64 GB DDR4 3200 Ram and a GeForce GTX 1650 Video Card! I use this system for Adobe Video Editing! Besides ticking the XMP & GAME BOOST button with FAN set to Auto, what else can I do to Overclock this system? I was told by MSI that This is basically a budget gaming board that cannot be manually overclocked? Any advise Would be greatly appreciated!

[@mazz85-]

@@cactusstudiossouth I personally avoid the OC stuff, i try to buy the powers i need by default. Except the XMP profile, my MSI board has CPU boost button for the cpu, but i am on Ryzen platform. I dont recall any issues with MSI products, it seems to be that haters have big mouth. When you decide to upgrade your system you would only need new motherboard and cpu, if you stick with Intel you can nowdays have smooth Windows 10 experience with 9000 series if you have DX12 games in mind, since you are using 1650 that will serve you a while... One thing you can check that your PCIE is set properly, i think 1650 is 3.0 ?

[@mazz85-]

@@cactusstudiossouth What games in mind ? That cpu is just weird combo with the rest.

[@Yapan22]

Hi, I got an alert saying "CPU overheating alert! Please check CPU cooler is firmly attached for working properly." I haven't even get to windows yet, it was on bios. But my CPU fan is installed properly, I already tried reinstall it before without reapply the thermal. Can you help me out? AMD Ryzen 5600 on MSI B550M

[@mazz85-]

@@Yapan22 Have you done any Overclocking or is set to default speeds ? What kind of case you have, small medium or big one ? What thermal paste used ? Did you apply it properly ? It is summer time in North, therefore your computer goes hotter also. How is it placed in the room ? MY SPECS; Phanteks Enthoo Pro White. DeepCool RGB casefans 4x. DeepCool GAMMAXX L120 V2 (MATCH with case fans). Corsair XTM50 High Performance Thermal Paste Kit. AMD Ryzen 5 5600, AM4, 3.5 GHz, 6-Core, Boxed MSI X570-A PRO (Flashed BIOS). MSI GeForce RTX 3050 GAMING X, 8GB GDDR6. Western Digital 2TB SN570 NVME SSD 3500, i have multiple WD HDD for videos. Corsair 32GB (2x16GB) Vengeance LPX, DDR4 2666MHz, 1.2V, C (I dont do OC, i went with the quantity instead). Corsair 1200W HX1200i (For future upgrades i took a big one). Creative SoundBlaster Audigy Rx (Music creation). Asus BD (Yes, i still have big movie collection).

[@Joe-hb6ek]

Computers and Motorcycles? Deserved a Sub on both channels!

[@jenifferbonilla1511]

I definitely need to update my bios. Half of the settings you mentioned I don’t have and it’s the same motherboard.

[@cubeified_]

OMG THANK YOU i have a rtx 4090 and later on i needed my bios to be updated and i couldn’t understand it and i turned it in to a computer shop and ever since i got it back apex was blue screening my pc and this fixed it thank you!!!!!! You just earned a sub

[@michaeljoshua8908]

Thank you bro, very informative.

[@robertgowdey]

NGL those added graphics are cool.

[@VOX-TRO]

I don't see any motorcycle videos in your other channel

[@thesig301]

I’d highly recommend not enabling CPU boost. It puts the CPU voltage way too high

[@genlongtsang1093]

How i change clock ratio

[@maxpondemer]

Thank you so useful

[@no_bitches_cope]

Thank you very much, video was very helpful ❤

[@nickmyers6112]

my msi b450 gaming plus max motherboard has an option for game boost which i turned on and now my pc won’t even start up

[@Jeremy_Watson]

Awesome, I appreciate your tutorial on how to use the MSI BIOS.

[@tonywhittle6520]

In my opinion if you wanted to design a bios system that is not at all intuitive, that has different information everywhere, this would be it.

[@erfguuipo8084]

Make sure you disable HPET. Some games suffer from low FPS when HPET is enabled. I think overwatch was one of them.

[@konradpl3357]

I have to warn you, please do not use cpu boost in your bios. It can set your CPU voltage to dangerous levels and even cause degradation of CPU core. Any voltage over 1,4V is dangerous. You can easy watch some KZbin videos from most popular content creators about overvolting Cpu, and how to properly overclock/boost your cpu

[@avroeh9547]

where in bios do you turn off cpu boost

[@alexckwitch1]

I’m sorry my friend, but I’ve never seen one of your live Steams!! What do you steam most?? Carrots, broccoli, onions?? 😂 (3:10)

[@tonkaGuy888]

Many thanks for posting this. Nicely de-mystifies bios settings.

[@localbadboys5457]

CPU game boost makes my CPU run hot as fuck so just make a note it could do that to you as well.

[@haies09]

What Cooling Type Mode you have set?

[@localbadboys5457]

@@haies09 idk what that is

[@chilson88]

Great video, new sub

[@stupplays]

U gained a sub thank you so much

[@shermansher7336]

ery clear and informative,

[@iron-Hide]

I just found this video as I was browsing some overclocking videos. Very helpful but I was wondering if you had further details on specifically overclocking with that z 690 MSI motherboard on 12th gen CPUs? I previously only overclocked with Asus boards so the MSI layout is quite different and I'm a little nervous to do it without an instructional video.

[@mind2654]

Thank you for your work.

[@cactusstudiossouth]

Well the good news is that after I reset the Cmos then just ticked the XMP button and Upgraded to a 2TB M.2 SSD with a fresh install of Win 10 my system now runs smoothly! 😅

[@bes12000]

AMD already has the CPU clocked to the max with PBO and everything enabled by default, just hit the ram profile and save it and thats about it.

[@ObakuZenCenter]

It's such a shame that MSI have gone so far downhill. Their BIOS' and motherboards are so problematic now and shouldn't be recommended. Especially with the bloatware that they push on users, such as MSI Center.

[@cataca91]

Im always trying to get your bios because on my x470 gaming pro carbon i just have the regular click bios that looks no way near yours mine is just called msi click bios and i recall having access to the one shown on your tutorial and dunno if my version is the latest or not im lost tbh.

[@VaptorIV]

Try EZ mode top right

[@dystopia-usa]

I prefer to build a system for a specific play resolution of adequate power/quality running stock that I don't need to stress components with overclocking. I also build them so I don't have to touch/upgrade them for their designated lifetime of use (or beyond to whoever will end up using it when I move to my next system). I'm currently building a 1440p system this month, & retiring my still-rocking 1080p 2019 gaming build system. My 1440p build will pair the efficient little powerhouse Ryzen 9 7900 12C/24T GPU with the cool, quiet running ASUS TUF version of the 7800 XT, since those two are a great pair for a no-bottleneck robust 1440p gaming system.

[@ronancunningham1705]

I have the same bios but not the same options

[@noelwhyte9834]

Thank you bro🙏🏾

[@SlashRules228]

Awsome work!

[@jryanr2010]

Depending on which cpu you have, turning on the cpu boost might not be a good idea. I wouldn't recommend with a 7800X3D, for example.

[@deineutterful]

really nice and helpful Video!

[@ronlouthain913]

I can't, for the life of me, figure out what is going on with my RAM. I have an MSI board. I enable XMP (the RAM is rated at 3200Mhz), and no matter what the system will not POST until I clear CMOS.

[@christopheralvarez1090]

Have you figured it out yet ? 😂

[@ronlouthain913]

@@christopheralvarez1090 I did, actually. To run 4 sticks I had to buy 4 at the same time. Reading other's issues sometimes, even the exact same brand of RAM just doesn't work together if bought separately. I guess the actual modules differ enough if they have different manufacturers.

[@christopheralvarez1090]

@@ronlouthain913 sound about right glad it worked ! I’m dealing with two Corsair vengeance sticks that can go up to 6000 MHz, but only can go up to 56 before they start to not post. XMP doesn’t work at all but MSI Memory Try it ! Feature was the only thing that got it to 5600 originally running 4800 MHz

[@philmaznyk1577]

Great video, thanks for putting this out for us. How is the BIOS OC video coming along. Really looking forward to what you have found out. Thanks again.

[@manhandler]

My msi b450 max setup my 3.6ghz cpu to 4.4 ghz by default and in the OC option i set the ram to its speed. The problem is the cpu ran fine but in games was jerky until i changed the cpu to 3.6 ghz and let turbo do all the overclocking. I don't use xmp and my ram run at 3200mhz what it's rated for. It also reports 3200mhz in task manager. So no, you dont need xmp at least on my mobo. The systen is now stable and doesn't overheat. For some reason mobo manufacturers set your cpu to run at their highest speeds and burn out your system.

[@lotust251]

you might want to make sure your CPU cooler is up to the CPU oc.

[@ZackZ-mg9uq]

OR....(now check this out), what about rendering the CR3 deplete of the Gx44?

[@pete5516]

@@ZackZ-mg9uqI’m gonna pretend I know what this means

[@ZackZ-mg9uq]

@@pete5516 It's PC lingo, I wouldn't expect you to understand.

[@MrGShock]

I don't know what to click to leave the Bio thing im literally keep exiting but it keeps putting me back in bio and im tryna leave

[@patchreefs]

Thank you very much. George

[@CarAudioInc]

durrrr how many videos like this are there come on bro

[@arghyaprotimhalder5592]

I don't have pcle lanes under settings/advanced/pcle subsystem settings In my one it has some sub-sub settings.

[@christopherwood2290]

I like MSI Memory Try It. It is pretty handy as I don't like to putz around with timings myself. MSI boards also recover from bad memory settings without having to clear your bios most times.

[@Dustin6980]

Thank you so much!

[@TheSaltyyOG]

would be cool to show how to get to oc profiles but other than that good vid

[@xenojz_]

I have a liquid cooler by MSI but the bios doesn’t have the Fan Cooler option

[@user-jk2dv3mt4t]

These settings should be on by default. I just purchased an MSI MPG 790 Carbon motherboard, these settings were enabled by default. This is an older video which makes sense, doensn't hurt to double-check,.

[@johnclarkvincentferrer9463]

Great video! Can this be done too with MSI H97 Gaming 3 ?

[@tigoes]

I run i9 13900k and when activating that default MSI CPU OC my game freeze (sometimes the whole OS) with warzone 1 and 2. Previously i had i9 9900k with an older MSI motherboards and i also had exactly the same issue making that OC fonctionnality unusable in my case. It is also AIO cooled (previously 240mm Corsair and now 360mm NZXT)

[@christofferjensen2850]

Me2

[@baronlund9725]

Maybe me also. Just firing it up.

[@3200shard]

Me tooooo I’ve been dealing with this problem forever my pc eventually crashes within 20 min

[@ehabsamir6195]

Thanks so much

[@drbishaljmt4575]

M.2_1 PCIe lanes source option ain't showing in my BIOS. I am using MSI B450M Pro M2 Max Motherboard.

[@heisen187]

Can you do an updated video with the most current bios and use this same pc setup?

[@sandstorm_lp]

Hey man. I put all the settings you listed. I am using rtx 3070 with i5-11600k but my gpu usage keeps being stuck at 50%.. I don’t know what to do.

[@GATERISTIC]

It's your ram ,it's chalked.

[@zavex_FN]

On my bios sting there is no beginner option and my game boots is grayed out

[@wmnsriteslol]

Underrated channel

[@elbapino6531]

Hello l'ami, je suis un bleu en informatique, j'ai une carte mere asrock, j'avais 2 disque de 500Go en RAID, je l'ai fais supprimer et depuis mes disques ne montent pas, je les vois dans gestionnaire de peripheriques, je les vois dans diskpart/list disk mais je ne les vois pas comme le disque C dans une fenetre; quand je clique sur gestion de l'ordinateur ou gestion du disque ca tourne puis rien aucune fenetre ne s'affiche. Comment regler cela dans le bios ? Aussi dans le bios quand je mets en AHCI, il relance le pc et systematiquement ecran bleu, du coup j'ai mis en EDI mais bon ca mouline pas comme je veux car je voudrais utiliser mes HDD de 500Go chacun. Tu peux m'aider svp ?

[@NastyC]

Where do I get Click Bios software

[@ranjanbiswas3233]

f12/del

[@haies09]

My M.2 has the OS on it, should I still enable the CPU lane?

[@haies09]

I assume yes, as most install the OS on a M.2 that’s in the first pcie

[@kennethsearfoss8538]

Why would some of those options to click on in the advanced setting not be available? Both mine and your bios is the same. For instance in Power management setup I don't have the usb standby power option to click on.

[@phatbabyinnit]

you have a newer version

[@dissectingdiy]

Yeah… My Gaming plus matches none of these options. Blows my mind how different a bios can be.

[@ccRae-e9v]

Not even my motherboard but explained everything so well it helped me figure out what happened to my settings after resetting my pc, thanks 🙏 🥴🫠

[@Edvinas404]

great video bro can u tell how to enable or disable hpet in msi board like this one?

[@romellorios6140]

Great vid

[@brovid-19]

ive been trying to get this message across to folks for literal years. OCing is not dumb. Expecting it to turn your PC into god mod is dumb. Learning how to talk to your hardware and correct these one size fits all set and forget default configs or a mobos "we need the highest clocks so it advertises better, who cares if it could blow the cpu into pieces". Educate yaself before you conflagrate yaself. yaself.

[@grievetan]

You can turn on above 4G and Resize bar if you have powerful CPU and RTX GPU

[@ukgunit001]

Think you need both Amd cpu & gpu …

[@grievetan]

@@ukgunit001 not necessarily

[@ukgunit001]

@@grievetan my bad was thinking “SAM” on amd ..

[@user-ze8hm5mq5m]

You were able to make one for AMD, I have the same Bios, but I have an AMD processor.

[@JarppaGuru]

we did not pay overclocking. its cost of default and its fastest of world if it fastest default. no need burn expensive parts. play 1080 max graphics if want bcoz you can. limit frames bcoz u will not see more than 60 anyway. its tested. u not see naked woman on 1 frame its just flash u not see it

[@lieutenantcook3991]

Thank you

[@gator5531]

I have an MSI board as well, I noticed yours also has Profile 2 grayed out. Why is that?

[@kg3474]

THANK YOU

[@mgazine1818]

You said “everything’s fine aslong as you don’t change voltage” im so lost on what you mean there, what settings change the voltage so I know not to change them. Does changing the CPU Game Boost to on and your CPU cooler tuner to water cooling (if you have one) does that effect Voltage?

[@sidneyalves1556]

hello, friend, I have this same motherboard along with an i5 12600k, and 16g ram Kingston3200. updated bios. but the game boost and per core options in the bios are disabled. can you help me please. thanks

[@MrPartyElias]

I have a z490i and the computer wont wake up from sleep after updating the Bios. All these power settings got changed now its doing that.

[@christopherallard1693]

can anyone confirm if the change to the pcie lanes are worth it considering that while it may increase storage performance it may increase the CPU overhead

[@kylee4163]

I believe it doesn't effect or contribute to the cpu whatsoever. 😁

[@ObiWanShinobi777]

Where in the Video you Turned on fastboot cant find it

[@x0utf0rbl00dx]

What is the difference between game boost and PBO

[@CrxsaderFN]

I followed his settings and my pc is now broken and doesn't work 😐

[@Vilhozi]

reset cmos

[@brianhiguera9]

Is it bad to have CPU boost on? Even tho I have i710700k to 5.1 boost GHZ

[@tackier52]

For me it was, I have an R7 1700x and the temps would be extremely high when it was enabled. Disabled it and got cooler temps with no noticeable performance impact

[@SpaceRanger187]

should have shown people how to get into the bios settings

[@DeathStriker88]

Everyone knows that

[@Gamma_Labs]

@@DeathStriker88 I dont

[@stargirl5194]

I dont have pch option for m2 only ''select gen 3 or gen 4'' i set it to gen 4