sawzilla came thru for this 056av build! New bearings for the bottom end! let's run this saw!

Edited by VideoGuru:videoguru.page.link/Best

[@sidvanderwerf3583]

Very good to see you Harvey, excellent teacher you are. I had a Homelite 2000 in about 1970. Then I purchased an 056 and I was in love. It worked hard for me and was a real workhorse. I wish I had it back again and love to see you working on an old friend. Thanks for the memories. Sid from Petrolia, Ontario, Canada 🇨🇦

[@rickfuerst]

Sitting in my deer blind in the Michigan woods watching Harvey! Life is good!

[@nicksanders9140]

Nice to see you working on that box of Stihls that you have.

[@markjoudrey7036]

Awesome to see you back.looking forward to watching this build

[@diafragm]

Cool! Harv is back, learn so much cheers. Looking well

[@chadhenwwodschainsawswoodw2108]

you a great man Harvey and we all love you welcome back looking foreword to seeing what you do to that saw :)

[@marko1025]

Good to see you Harvey ✊🏻🇦🇺

[@jonsalvehakedal2988]

You are an Ironhorse Harvey, good to see Y❤

[@tomhowland2431]

Good to see you Harvey!

[@martyrutter3630]

Great to see you a lot of your friends have been asking about you on several other KZbin channels. Blessings my friend to you and your family. 🙏👍

[@phillipanderson3715]

Glad your doing better. Been praying 🙏 for you.

[@jamiedalluge9472]

The Horse is back! Sweet

[@nighttrain022]

What welshwizard822 said. Great to see you back, Harvey. Now I look forward to watching your clip. I know that the 056 is a little different than my 051 and 075's but I really do find myself drawn to these old saws much like I was drawn to 55-57 Chevy's, Camaro's and Mustangs. Muscle saws and Muscle Cars. Let's go, Harv!!!

[@dirtytsfarm2141]

Glad to see you back man 👍🏻

[@edwinburns4785]

Glad to see you back and take that nap, I never miss mine.

[@ruiramalho8796]

Great to have you around and many thanks for sharing your knowledge. Wishing you all the best

[@Mm1twiggy]

Glad to see you back. From South Africa 🇿🇦

[@mikahakkinen5651]

awesome see you with new video mr harvey.we have miss you.

[@brucenicov1224]

Great to see you back in your workshop Harv!! You are looking pretty good!! How you feel may be another story. Enjoy those afternoon snoozes, you worked hard your whole life, you deserve them. Work around the homestead is never finished anyways. Keep it sharp and tuned!!

[@jasonadkins8018]

Hey Harv good to see you again. Don’t trash those cases please.I can possibly make the oversized studs to fix it. Thanks Jason

[@nicksanders9140]

Great to see you Ironhorse! Hope you are feeling well.

[@JandSChainsaw]

Harvey Glad to see you are doing well...

[@BuckinBillyRaySmith]

I gotta be honest. It’s kinda about the cat 🐈 for md now . Love ya ol’ man

[@ronbrown1901]

Keep the videos,stories and great info coming, please! Would a gasket delete and muffler mod be worth the effort on a Husky Rancher 460? Also, would attempting a DIY port job in the Tinman/Ironhorse school of thought be functional on the same Husky? I don't need a big saw but I love the sound and the idea of more torque. Thanks for your toughts and videos!

[@erichk1674]

I remember running the 056 and 066 man what great machines .

[@itllkeal]

Thanks for sharing this and good to see you again

[@brandonyoumans2837]

Glad to see you back on here. Drove by the other day on my way to Canisteo. Hoping everyone is well and healthy. Oh I almost forgot......I put a twist on the iron horse pipe that causes direct flow after bounce back to the exit !!!! Scooping and direction built into your design that causes zero restrictions above the original design.

[@jamiedalluge9472]

Iron cat turned orange!

[@stevetheriault4164]

WAS THINKING ABOUT YOU A FEW DAYS AGO ,,,BUCKIN WAS RUNNING ONE OF YOUR SAWS ,,,HOPE YOUR DOIN WELL IRONHORSE ,,,AND THAT CULLEN AND BARB ARE WELL ALSO ,,BEST WISHES TAKE CARE MY FRIEND 😁😁👍👍

[@ryanhill9368]

I've been using (and regularly fixing) my late grandfathers 056av for years. Can't wait to follow along. Thanks all the way from New Zealand

[@justinweaver8107]

Love the 056❤

[@alanwatts9232]

Merry Christmas Harvey, hope to see more of you in the New Year.

[@tinmanssaws]

Great to see ya back Harv!!

[@theironhorse6600]

Hey Tinman!

[@Fabz.Acres-BlackLover]

Great to see you back Harv. We were all worried when we didn't hear from you for a long time.

[@eriknelson6529]

Awesome Harvey 👍

[@travelswithbenny3328]

Hi! Just subscribed. I'm rebuilding a 056 right now. Cost me 75, missing small parts, replacing cylinder and piston, rebuild carb, new to me recoil. Never done it before and I screwed up not taking pictures. Could use a top cover if you know where one is lol. Good job on the video! Putting a 54mm jug on it instead of the 52, the old one is worn, not scored. Bearings seem good to me. Going to be interesting.

[@kevinwilson7919]

Just a treat having you post a video! Glad you are doing good! Always looking forward for you to spread knowledge! Love you brother! Kevin

[@Finom1]

IRONHORSE. God Bless and Protect you and your loving family:) IRONHORSE, Bless you for sharing your life and wisdom with us:)

[@moretmolina274]

Hey Harvey Merry Christmas I just wanted to let you know that everything still going good be well mind body I'm still cutting and I'm still doing the documentary on the business and the industry everything from sawmills and climbers to followers in urban arborists and builders all over the planet to make the industry a better the use of street cred and bartering we'll make it a little bit easier cash will always be on hand just picking up pieces from last year and putting everything back together for this new 2024 give the family a big hug from the Molina family to yours be well Merry Christmas

[@davidnail9679]

So glad to see you again . I've been watching for you back.

[@mechanech]

Harvey it’s really good to see you back doing what your ment to do!!! Thank you

[@dennisconstantine624]

Great to see you back Harv been wondering how you been for a long time. Cheers from NZ.

[@stevenlaxton3618]

Glad to see you and IronCat both looking well. Hope you’re feeling better and having some fun.

[@HHBCustoms]

Good to see you back in action. Nice to see another shop kitty as well

[@jeffgrier8488]

It's great to see you back Harvey, we've missed ya!

[@bigballersofbrynsiencyn6753]

Brilliant video thank you

[@travistoth8834]

I ported my first saw! Wow what a difference! Now I’m porting all of them lol thanks for your videos

[@jasonreese4824]

Nice to see you. I miss the old time story's and I really missed you .

[@pentecost66]

Thanks you for giving your time to this channel I always look forward to your builds. 👍

[@justinweaver8107]

Happy thanksgivin harve barb an cullen

[@HayChaffandSawdust1]

Prayers answered!! Glad you are getting better; I learn so much and enjoy listening to you speak about 2 stroke theory and fact, but more importantly, we all worry about you as the person we have come to know and love.

[@paulmcreynolds1774]

Great to see you are feeling better Harvey. Good to see you back in the shop. Take care of yourself and God bless.

[@user-pq6mv8dm8s]

Good to see u

[@cliffjenkins6419]

Keep on keeping on Harvey. When it comes to hotting up saws,you the man! Look after yourself.Cheers from NZ

[@ryanfriars545]

He’s back! Long time no hear! Glad to see you back behind the camera Harv! 🇨🇦

[@thomasfrost6993]

I know how to dig too. I got bearings for my old snowblower from a wheel chair parts supply company. Also, the bar studs, take the helicoids and studs out, clean everything really well so there is no oil residue in the holes, studs and helicoids. Coat everything with "PC7" two part epoxy and thread them back in, then wait two to three days for it to cure properly. PC7 is great stuff but that is the only area on a chainsaw where it will work. I've done this to two of my chainsaws and haven't had any problems. Just make sure you coat every surface, inside and out. You have plenty of work time too. You look good, glad to see you with more vim and vigor. Take care.

[@dn0682]

Those 056 chainsaws are built like tanks with plenty torque. Glad you are back sir and hope you'll feel better in future. Regards Dorin.

[@robsinclair1001]

Glad to see you doing better

[@BuckYaSaws]

Good to see you back!

[@DavidArentz]

Good to see you Harv. Hope you're feeling a little better. Always enjoy your content

[@benscustomsawsandrepair]

Great to see a video from ya again

[@buck.rudy7]

Thank you Harvey, i just picked up 4 of those saws 2 of them were the magnums. I tore the two magnums down and i was surprised to see they were 54 mm bores, thought they were going to be 56mm. You cleared it up for me when you said the super were the same as the magnums.

[@307j.o.a.t9]

Good to see ya back in the shop Harvey! Glad youre feelin better!!

[@toddtredway3068]

Good to see you back in the shop hope all is well love the guys at sawzilla helped me with some old homelite parts great guys

[@christalbott8446]

Great to see ya! Hope the family is doing well! You just have so much info in your video's, that I can only imagine the info in your head!!

[@johnclarke8180]

Looking good, nice to see you! Thanks for sharing.

[@stormcrowe9820]

Great to see you back & feeling better Harvey!

[@jjknowles7348]

Great to see you. Glad you are on the way back . we missed you. That's a nasty sounding saw.

[@user-lu4nu4nb8e]

Really happy to see you back I hope you and your family are doing well

[@nicolemurrin4395]

Glad to see ya back Harv, keep your head up trust in God and good things will come.

[@SomeGuysSawShop]

We’re all glad to see you back

[@cameronstamey599]

Good to see you back, an glad your feeling better buddy!

[@ronsilva516]

I like your approach on the saw I look forward to this saw build👍👍👍😎

[@lesterkirian7727]

It’s good to see ironhorse I’ve missed your stories that you tell besides all the good content that you post so take care and I’ll be looking for you

[@welshwizard822]

Good to see your ok and back with us Harvey, missed you and concerned for your health. Hang in there man and keep going 🏴󠁧󠁢󠁷󠁬󠁳󠁿👍

[@jasonbusch3624]

I was getting worried about you. Glad to see you are doing good. Great video as usual.

[@rakersdownnz]

Good to see you back Harvey, what A great Sunday morning surprise, new content from you, and on the legendary 056, always one of the most good looking designs. Good to hear you're good !

[@stephenhaney661]

Good to see a new video from you

[@billupstateny9151]

Very good to see you 🇺🇸🙏💯🗽

[@MontanaRoofer]

There he is folks! The man,the mith,the legend!!!😂❤ Thanks for your time Harvey love your channel!

[@theironhorse6600]

Thank you kindly

[@230e4]

Good to see ya Harvey. The 045 & 056 saws are some of my favorites. The first logs I bucked up years ago was with an 056 Mag II. The ignitions have been problematic for me. I have been searching for a good 056 mag 2 56mm cylinder for a while. Lookin forward to the 056 build.

[@EightWheelsRollin]

Looking forward to this build! Good to see ya back in front of the camera, missed ya.

[@clarencetrice4442]

HI IRON HORSE 😊😊 U sure look alot better than what U I sure hope U feeling better than what U did 😊😊 the old saws didn't turn many RPMS they did have the pulling power 2 cut the big trees U can feel them pulling your arms they were old school chainsaws then they was alit better and faster than the old 2 man cross cut saws and the teeth on the old chains were 1/2 inch they don't even make chain like that no more and it's very few of the old chains U see anymore they had alot better steel in them and the way they were made iron horse U should do a video on sharing the chain so it cuts rat tails its not many people who sharpen a chain like that 😊😅🎉❤🎉 😊 OMG 11 19 2O23

[@robertdancho9671]

Good good and good.

[@polderfischer8565]

Good to see you back! Loosing weight is the best start into a healthier life. Fresh food and a bit of excercise helps too. We are often not too old, but too sick. Greetings from northern germany

[@zacharygross460]

Good to see you again buddy

[@roadie5872]

Great to see your doing good love the content I recently was given one of these saws

[@tennesseedave6771]

Good to see u back & doing better!! Good on the weight loss too,make u feel better the more u lose!

[@Arfabiscuit]

Good to see you Harvey

[@jcc3999]

045AV is 75cc and the 045 AVSE [Super] is 87cc. There was a newer 045 AVE Super II, that was 17.4 lbs and also 87cc

[@babalu1126]

Glad to see you back Harvey. Great information on this video. We definitely come from a different world of thinking than that of today. I’m 50, we find something that will work, and find a way to make it work.

[@alotl1kevegas860]

Why not use a 17x42x14mm bearing? There's a place local to me where they specialize in just bearings. I have taken old bearings from a kawasaki ksv700 that weren't available anywhere else, and they matched them up for me.

[@danschuckers5281]

good to se you back harvey

[@kurtsteele5587]

Good to see you.

[@brandonf1226]

Yes @THE IRONHORSE nice to see you you are looking great!!

[@spencerh2860]

Much love and respect Harv from the uk

[@RichFife]

Don't change the case... look up thick walled Keen-Serts... solid thread inserts. 😉

[@lelandhuey2265]

I’ve used helicoils, e-z lock and step studs to repair bolt holes. I would have gone with timeserts or keen serts

[@RichFife]

@@lelandhuey2265 I love keen-serts... you can get thin walled, thick walled, hardened, Stainless, etc.

[@henryadams8560]

Iong time no see my friend, glad to see your feeling better.

[@BigTongan]

Harv, how are you youngman? How is your health? Ongoing healing prayers upon you. Take care! When you can...give us an update....

[@kengilmore4384]

Looking good