j red string trimmer straight gassed! let's port the new engine!

[@famasmaster2000]

Part way through your video and want you to know how you truly made my day Harv !! Much love to you and the family and you are always in my prayers 🙏🏻 ❤️ Great to see you givin' her

[@curtisbaker5407]

GREAT TO SEE YOU AGAIN HARV. Hope you continue to progress and get better. ive actually got a trimmer just like this Harv. that was given to me. i got it running and realized WHY he gave it to me. he couldnt keep it running so i brought it home and got it running...VERY boggy and sluggish. i said when i get time away from saws that i was gonna attempt to port it. its been 3 years, so now is a good a time as any!

[@roadie5872]

Great to see you getting better got to take care of yourself glad you still bring us along this is a great little project can’t wait to see it breath fire again

[@marcduclos9789]

Good to see you today. Better is hearing you tell the story to get there.

[@ryansiebold9096]

Question, tips, tricks Stihl 090 piston mods? Where to trim weight, could I drill small port windows to reduce weight and slightly increase piston flow, without hinderingstrength? Building dedicated Long bar 76 - 90" alaskan sawmill. Your porting tips n tricks done to my farmertec 880, straight power, snapped, broke my chain during break-in buckin 56" bar. No timing wheel "yet", no timing change, just piston mods (weight, flow, single ring), port shape, flow. Intake tricks. Difference from old stock (struggling to buck 56"), tips n tricks in the new motor, snapped the 56" chain, and pulles very respectfully 76" milling dry hard Maple. Help pointers on 090 piston?? THANK YOU!!!

[@waynevincent-le7jk]

glad you are feeling better. Your shows are always interesting but to get off the topic of string trimmers I have a couple of Pioneer P-41 saws but one has a bad ignition module is there an aftermarket fix because here in southern Ontario and everywhere else there are no modules available any help would be appreciated thanx

[@lesterkirian7727]

It’s really to see you back ironhorse keep getting your health back in good shape 🙏🙏🙏

[@tordjohnsen6941]

Nice to see the good guy online again :) remember Jonsered is not made by husqvarna it was a factory bought up bu electrolux and all husqvarna after that are jonsered copys. This stuff happend in the 80`s all over the globe i think, Norway "lost Jobu" sweeden lost jonsered think same happend in US and Canada. I live in Norway and a Jonsered is gold for ppl that use chainsaws :)

[@AkershusogstfoldTreservice]

Always good seeing you, Mr. Harvey ❤

[@NickTaylor-lm1lv]

Ready to see the rest of this build. Good little teaser video.

[@HawtSawz86]

You’re looking great sir! Been thinking about you, keep focusing on your health, you got this. I recently started using a continuous glucose monitor and it really changed my perspective about my diet, I have been able to manage my blood sugar without insulin and by intermittent fasting as well as severely limiting carbs. I feel so much better and I sleep better. Hope the same for you ❤

[@martyrutter3630]

Good to see you back!👍 Hope you continue to get your strength back and keep the videos coming. 🙏👍

[@traynegrau8248]

Well should have figured Something was wrong. Glad to see you Have climbed atop another stumbling block Horse! Sorry I missed you last weekend! You sound and look healthy. Good to have ya back once again!Give me a call in the am if you want to I'll be driving truck!

[@lanceevans688]

Good to see you Harv. Glad you're feeling better. I started dabbling with a leaf blower lately. An old John Deere branded Echo. Going to try to get some more jam out of it. I'm interested in seeing where this goes.

[@toddzilla6491]

Love the video! I have tweaked two 27cc Stihls to put on my RC planes. Not the best but affordable for me. Glad to see you working again🙂

[@canadianboyee]

Not sure why I'm so excited to see what you can do with a whipper snipper but I am 😅 glad to see you back big Harv

[@christalbott8446]

Nice to hear your voice! This looks like a fun challenge! You always have to keep the brain ticking! You take care!!😊

[@thomasfrost6993]

Glad to see you back in action. I'm really looking forward to seeing how this one comes out.

[@BobE.Dancho]

Great to see you. Keep up the good work.

[@tonyreeves7391]

Hi there love watching all your videos just about to put a new topend kit on my 365 but the cylinder bolts are super tight auy tips would be great thanks for your time.

[@scottwilson4396]

Something different and an easy build after the head scratchers is always nice haha ! Good morning Harvey ❤

[@pepepepito7824]

I have a Husqvarna 430LS, I modified the muffler, a job on the transfers. and improved his power and speed. Happy with the result, I have been using it weekly for more than a year to work. I'm using maxima super m at 50.1 and it creates a lot of carbon and frizzes my piston rings. I already cleaned the piston once and it was like new, no wear, it still has the marks from the lathe.

[@jims3dprinting]

great video thank you for sharing my name is jim and i have a stihl 661 i put a new coil and spark plug on it and it still will not spark now would it be that solenoid on the carb that's not making it spark the coil is gaped right and stuff let me know thank you have a great day and God Bless

[@307j.o.a.t9]

Looks like a cool little project! Lookin foreward to seein where it goes!! Good to see ya!

[@Ketis1985]

I modified my fathers Jonsered CC2145. I did just base gasket delete and muffler mod and it wake up pretty good 😊

[@jeffgrier8488]

I'm looking forward to seeing how this turns out Harvey, i don't know anybody who's torn a string trimmer down that far!

[@kurtsteele5587]

Good to see you. Hope you and the family is doing well

[@jmudd5449]

I want a 61 so bad. Hard to find a decent one in oregon.

[@bignlittleoutdoorstexascam3031]

I have a old homalight 550 I would like restored to running and cutting it was running few years ago

[@bignlittleoutdoorstexascam3031]

i have a second saw a 455 rancher would like to push to the max if you can is ther some one you can recommend

[@Magoot2456]

A ported weedeater?!?!?! Dude I LOVE IT!

[@larrywarner9314]

Only place I check squish is over the wrist pin most accurate place

[@robsinclair1001]

I think you're right Harve string trimmers are pretty much disposable Makes a good video tearing it apart and putting it together Good example of how you can cook a piston in a chainsaw

[@TREK8481]

2 weeks later what happened?

[@shanechristlieb8717]

100% agree with ya. An thats always the battle in the shop, especially having to run oem parts! Shop rate minimum of $45/hr plus parts, setup for failure in a throw away world we live in now days. Ebay/Amazon has changed the world, but fine line to dance on with oem/aftermarket parts.

[@clarencetrice4442]

HI IRONHORSE 😊😊 it's great 2 see U back again I hope surely U are feeling.alot better now than what U was U know U have a job 2 do that is working on chainsaws thank U truely 😊😊 OMG 6 25 2O24

[@williamdeberry3232]

Hi iron horse. Been awhile. Hope you are doing well.

[@HayChaffandSawdust1]

A little "proper" engine like that makes a young lad's mind think of ALL KINDS of stuff to do with it!!! Thank you sir!

[@timbarden4578]

Hi buddy.. I like stihl 4 mix trimmers they have torque but low rpms..they will chew through about anything.. they embarrass most other trimmers in my opinion..2 strokes do like oil ive found🙃🙃👍👍

[@jordanhaelterman731]

Ironhorse have you ever hopped-up and gear drive saws?

[@theironhorse6600]

A long time ago!

[@garengtutorial8923]

Halo boss... Senang melihat anda. Mungkin kalau dekat saya mau belajar tentang mesin2 bos

[@matthewbutcher203]

Why not cut the piston and base instead of adding mass to the piston?

[@Ketis1985]

As far as compression mods i would just run that stock piston with gasket delete....

[@matthewbutcher203]

@Ketis1985 it would be much simpler to drop the cylinder and cut a popup than weld a popup on the piston, plus the less rotating mass they have, the more responsive it will be...

[@Ketis1985]

@@matthewbutcher203 im aware of that , but it wont need more compression than what just simple base gasket delete will give...

[@Finom1]

WE all love you IRONHORSE:)

[@mikeveri7333]

How can I get in touch with you on a saw build

[@nataliak4804]

Hello, how can I contact with you, Sir 😊 ? I would like to order the muffer

[@felixbinette9752]

Hello Harvey you look well

[@erdemir5641]

How come you look younger than 4 years ago

[@billupstateny9151]

enjoy this content, Harvey. 🇺🇸🗽💡

[@w6qd]

I hope the cat is ok :^(

[@kjohn1626]

CAT FIGHT!!!!!!!!

[@dennisconstantine624]

Wife yelling dinner ready?

[@daninuesca3801]

You da man..🫡👍🤙🏽

[@garydetaeye7081]

Your cat tearing each other up

[@shakes7333]

Husqvarna engine that's odd. I have two Husqvarna weed eaters that both have Honda engines, but they are 4 strokes.

[@thetwostrokerebuilder]

Whackers are very rich cause always wfo. All you have to do is lean out a bit with carb adjustment

[@andrewgibson1991]

Oh my what a horrible muffler lol😂 emissions garbage I’m with you bud