Casting Metal in Kinetic Sand (Oddly Satisfying?)

[@minidino6898]

Can you put raw meat in a glove then put it in liquid nitrogen to represent a hand and what it would do if your hand was in liquid nitrogen

[@vishalworldoffire]

meat is like peeling the skin off your hands and putting them in liquid nitrogen. They should instead use the foot of an animal with the fur shaved off.

[@scarffoxandfriends9401]

They did a pig heart already

[@manfredschroder6789]

Its the same like molten metal if u do it fast it will not harm your han

[@skinsey85]

@@vishalworldoffire The commenter said to put the meat in a glove to simulate a hand, not just meat.

[@skinsey85]

Except latex is not a simulation of skin and wouldn't react the same as skin. If they wanted to get an accurate reaction, they'd have to use a part from an animal. More specifically, a pig since they're anatomically similar to humans, including their flesh.

[@dedesaad9707]

Can you guys try to freeze an egg with liquid nitrogen

[@cathyb7189]

I think that is very interesting. I'd love to see that.

[@teetice]

sounds cool

[@kyleharper3507]

Dede s

[@alroyravenscroft5831]

"That miight be on fire" That's how you know he does this for a living, not even phased 😂

[@Clover_knows_pets]

@Clover J my name is clover!

[@dayjay2011channel]

Watching a grown man play with Kenetic sand with special gloves makes my day

[@lunarumbreon3803]

Lol

[@ok-vk5by]

Same here 🤷🏻‍♀️

[@bee-un4fq]

👏👏👏

[@jotaromidoryia3981]

I call this guy a watered down backyard scientist

[@kathykumqwat]

Same here

[@freshnugget2099]

Moon sand was the OG, who remembers?

[@kree4681]

yeeeeeeeeeeeeep

[@iheartjazminandsalvia6145]

Fresh Nugget YESSS

[@ehhvelo5112]

oobleck was the og og

[@milkshakehusky7155]

Yea

[@jordon-fx6ni]

Hek ya man

[@mistersourpatch7232]

Can you coat ice or dry ice with neverwet and if it works, let the ice melt to see if the never wet will be strong enough to hold in the water and for the dry ice see if it makes a bubble of gas.

[@THESLlCK]

Ice Wallow Come First interesting comment award goes to you.

[@jaygroomes1357]

Well. I love the idea. But I don’t think that would work as well as anyone would want it to. I would love it if it worked like that but I think it would just spill out over the never wet and make a mess

[@dimactavicus]

Ice Wallow Come neverwet isn't forcefield

[@rttr5777]

you know that never dry is a spray not a solid

[@mistersourpatch7232]

Ourboithedimz lol

[@emileamiller8789]

Hey Nate! I wanted to know if you or Grant could try to syringe liquid metal or liquid gallium into an egg shell. I've always wondered what would happen. Thank y'all so much!

[@unknow3408]

it will take the shape of egg but in some cases it can break the egg shell and leak out.

[@emileamiller8789]

@@unknow3408 Yeah. Thanks!

[@wendybutler9881]

emilea miller I really like that ida

[@emileamiller8789]

@@wendybutler9881 Thanks :D

[@emileamiller8789]

@Lil Mac Thank you ❣

[@moonlightwolf8359]

Can we just agree that Nate is kinda adorable? Especially when he’s going “Squish squish squish squish”

[@yourMom-ic4wr]

Lol, I think Callie has already called dibs on him

[@alolanexeggutor1010]

Please tell me your a girl...

[@Scalytt]

@@alolanexeggutor1010 why?

[@KevinD-nf8jv]

CRUSH

[@whopperslol]

squish squish squish SQUISH

[@loudsiren8065]

what happens if you mix gallium with another metal? will the gallium inside the metal melt and seperate at room temp or will it become enhanced by the other metal you mix it with???

[@TrueBlueEG8]

It turns aluminium into something as brittle as ice

[@TrueBlueEG8]

I never said it was weak...

[@loudsiren8065]

Interesting

[@madeincda]

The comments here are way more inspiring than other scientific videos. You feel like you walk away with something constructive to think about... It's refreshing is all I'm saying.

[@DeluxeXIV]

TrueBlueEG8 what is your definition of brittle?? 😂

[@arimorawski3782]

What would happen if you dehydrated or melted silly putty?

[@CSK513]

They did that with slime I think

[@timmytammy4297]

Ari Morawski I read it as “slutty putty” haha

[@GrumblingPete]

Umm, it didn't spill because of a low edge, we saw you miss the mold. Fun vid though.

[@henrimaitrejean4881]

Lmao i also noticed that

[@LunchBXcrue]

He thought he could lie to us

[@tortle-mations3710]

Lol

[@sleepykiwiz8986]

Hey maybe u can not say that he’s wrong and be a little more nice what did he do to u like no need to call him out

[@sleepykiwiz8986]

Idk

[@thomasnolastname8734]

What would happen if you put kinetic sand into liquid nitrogen?

[@kiraschii5629]

lol I’d like to see that

[@RichardEnglander]

Get cold dude

[@A_Red_Fox]

CAN YOU MELT A MAGNET?

[@adriancarp3476]

COMING, IN THE NEXT EPISODE OF TKOR

[@crystalmayo9393]

LINEAR MOTOR LAUNCH PRODUCTIONS duh

[@BigStiffyJuice]

tis me, Crystal were you bullied as a child

[@PazoraArts]

Yeah you can melt a magnet, but it loses it's magnetic properties.

[@berad26]

The Backyard Scientist did basically exactly that in a video of his, go check it out

[@vinayhirani2035]

Try to genetically modify a plant

[@videobeast286]

hulkthegamer100 he should

[@wolfkatsneekwaffle5374]

Yesss

[@PinkShades]

Shock a seed a few times with high-voltage static electricity and then plant it. Maybe it'll mutate the DNA sequence enough to affect its growing instructions.

[@unicornbanana4154]

You can allready do it

[@ZomgLolPants]

you can splice plants together easily, there's guides on it online

[@SuperEelektrossity]

What would happen if you put vinegar in a vacuum chamber and then poured it into baking soda

[@ambarsaldivar6467]

4:15 for those who just wanna see it happen

[@justastaythatwillnotbename2990]

Thanks

[@Data-AnalystSera]

DO NOT PUT YOUR BARE HANDS IN GALLIUM! It will stain skin brown, and is toxic to ingest. Rubber gloves are fine, as gallium is pretty tame as elements go, and fairly cheap as well. If you want to, then go ahead and get some to mess around with, but it will stain things, so try not to spill!

[@lynxadink9412]

it will not stain as every time you drop it onto any surface its like a blob of it and very easy to tidy up and it will not stain ur hands as I work with gallium, and its not cheap

[@Data-AnalystSera]

Anonymous it is cheap in comparison to other similar materials, and one of the least dangerous.

[@Data-AnalystSera]

Anonymous it is about $645 for over 4 times as much as they used in the video. As far as pure metal goes, cheap as dirt.

[@Data-AnalystSera]

Anonymous A minimum wage job for 2 months can let you buy just under 3 kilograms. Not too bad.

[@jamesmills8632]

False it stains grey and you can just wash your hands or whatever you got it on

[@matthew.melley]

Use baby powder when casting the logo so it wont stick

[@its_me_ak3819]

Can you see if molten salt conducts electricity like salt water

[@vornamenachname6300]

ITS_ME _AK Simple answer: yes. The Na+ and Cl- Ions are free to move.

[@henrytimme9079]

ITS_ME _AK do it

[@its_me_ak3819]

Anurag Bhatlawande Anurag were you Phy sir last year in Goa of gvm pace

[@SC-RGX7]

It will conduct because of the mobile Na+ and Cl- ions present in the molten sand

[@vornamenachname6300]

angrywolfjr read all other answers. It's not a metal

[@PeterParker-ym1zl]

Rip Steven Thompson so sad to hear the news thank you for everything ❤️🙏

[@peaches1353]

Peter Parker who

[@seicento2tone]

Peter Parker who?

[@Jay-il5xj]

Did he die or something??

[@wannabeotaku8324]

Who is Steven?

[@SuperPITSteelers]

You did a great job of sounding shallow and rude. Well done

[@jettyratflorida5917]

Can you melt a magnet and cast a new one? Will it work?

[@jamesr.2017]

No, melting magnets causes them to lose their magnetic force.

[@marca6597]

Jetty Rat Florida yes, it's metal so you can magnetize it again with another magnet

[@migdonalds]

SkiddyBud but it won't be permanent. Heat destroys permanent magnets' properties

[@marca6597]

cypekpl cat unless its for about hmmm... 2000 years. in the same position, undisturbed.

[@creambun101AJ]

6:15 I started laughing my face off XD 😂

[@yan-yan6972]

Lol

[@teatime2090]

i had subtitles on and it made it funnier haha

[@roamspida4951]

Squish squish squish squish squish

[@xstr1ke446]

How about you see how much magnet force to make a car move?

[@thefallenraven746]

Depends on which direction you are trying to move the car and wether or not its in neutral

[@miningsquidsbadcontent8188]

Mrbeast just did this

[@yoyions8278]

noice

[@xstr1ke446]

huh... i didnt see him do it, when did that video come out?

[@spammyyt6879]

that sounds like something mr beast would do

[@jamiekruppa4530]

Who’s here after Grants death. It’s so sad. R.I.P

[@bigfloppa2089]

That was last year chill

[@bigfloppa2089]

That was last year chill

[@amlrls]

Rip

[@bigfloppa2089]

Wdym?

[@Liamhvet]

Leah Abiye Love He just wants to see regular comments

[@willbush4419]

Great work. Watching since 1 million

[@henryhb6302]

Same!

[@ProAsNooB]

Will Bush me too!

[@andysameh]

The same..

[@Epixul]

me too!

[@zagred4226]

or is he talking about the subscribers 🤔HMMMmmmMmMmMmmMMm🤔

[@stevengrant4687]

I noticed, often, that when you cast with aluminum you get a rounding off on the top. My question would be is it possible to relieve the surface tension on top to flatten that out when casting?

[@sumorabbit2160]

Not with open casting, but you would if you use a casting flask with a riser and sprue.

[@backofthenet4117]

Open a carbonated drink in a vacuum chamber 👍🏽👍🏽👍🏽👍🏽👍🏽

[@Landon_Chrud]

How would u get the tab to move. And if u used a wire it would be hard to do it. So what's the point

[@mr.burrito5591]

Wouldn't opening it in a vacuum chamber and opening them outside of one have no affect? It's like opening a soda in a cardboard box. If he's not going to use the vacuum chamber then what's the point?

[@donf5502]

Just as easy to put a carnonated drink in the chamber already opened. That would be a cool shot though

[@maniaclife6433]

The can will expand and blast off....

[@toriasanchez4167]

"Squish, Squish,Squish,Squish,Squish,Squish,Squish." 😂 lol

[@BadBoy-ts4fg]

1:46 hand reveal 😱

[@peterpham1887]

Frosted Buns lol

[@adogwholikesdogs3079]

Frosted Buns OMG

[@Stasis1524]

Glimmer Wolf ...what

[@dawnmartin5073]

Frosted Buns a

[@GriffinShepardBasch]

Frosted Buns read about section *new* eat elf butt

[@triangleboy_]

Try mixing kinetic sand with super glue

[@aditya.tokare]

What about ,dry ice+ antifreeze+ alcohol ?

[@marca6597]

Nothing, the alcohol wouldn't affect anything and the antifreeze will just melt the dry ice

[@yashsharma-bx5ux]

i have seen that anti freeze also get freeze under extreme low temperature like in presence of liquid nitrogen

[@gamagosh11]

SIZZURP

[@awkwardpotato7900]

Alcohol can't freeze. It's like trying to freeze salt water.

[@andyphu5038]

AMMONIA+BLEACH

[@moomoomaia]

So wholesome it doesn't even have a middle finger

[@koreandogeater9292]

That's the only finger that's important 🖕🖕🖕🖕🖕🖕🖕

[@ken_fb3678]

@@koreandogeater9292 lol

[@theblackbeltcuber6626]

Put kinetic sand in a foundry

[@Cynful]

Yasss

[@juanvilleda9259]

TheBlackBeltCuber

[@Postghost]

It will just turn into that dry normal sand. Didn't you watch the video?

[@gloooowria]

wouldn't it set on fire!?!

[@themessiah..]

Postghost but he will put it in the foundry itself it'll probably turn to molten glass

[@Justin-vb6pk]

Like the new intro style 👑

[@deepakmenon7733]

It's kind of old

[@astridb5575]

Try cooking a hot dog over molten aluminum and then cover it in foil and drop it in nitrogen

[@ian1078]

thats a mouth full...

[@dipankarghosh8495]

Hamilham.

[@louii6003]

Did that

[@axolotlife677]

There is a line of random and that has crossed that line 5 years ago

[@Nathan47824]

0:11 Rest In Peace King

[@mohammedmokhtar]

That 90s intro is sick guys. Make more like that stuff!

[@mohammedmokhtar]

Wow, thanks for the heart KOR!

[@metalmangaming3614]

Meh the intro is OKAY

[@Theevsss]

I agree with you the intro is so cool

[@clipsus_clips]

Can you please do a video about kinetic sand in metal foundry? Will it turn to normal sand?!

[@KnotWrip]

it'll burn

[@nathangamma3504]

It looked like is burned and turned into normal sand

[@wingsofthunder170]

it will burn up as seen in the vid :P

[@theblackbeltcuber6626]

Try to make glass with kinetic sand

[@MikaelK5]

TheBlackBeltCuber its almost impossible because kinetic sand is about 90% Polymer and about 10% sand so basically its just gonna burn to dust...

[@draguinny3823]

I was playing with kinetic sand before I was watching this. And then I watched it while playing with kinetic sand It was just in my recommendations, btw.

[@clipsus_clips]

*RETRO INTRO*

[@luckyproriders2494]

“Colored flame” flame thrower🔥

[@winter4265]

They already did it?

[@harrison4781]

LuckyProRiders yess

[@hellyeahs6828]

LuckyProRiders yes

[@jericodawsonmarcos7529]

LuckyProRiders just use the correct kind of salt

[@SPARTAN_CRUSADER]

Can you try casting metal in play-Doh

[@mrwhoannon300]

Spartan Crusader playdo would probably melt

[@iambored5]

its spelled Play-Doh you bone heads

[@SPARTAN_CRUSADER]

M C lol true true. I’ll edit my comment lol

[@arthirumale6602]

it will melt and burn as soon as liquid aluminium will touch it....... It might work with gallium...

[@charleymarie]

1:42 " I'm going to get some of this sand put it in the pan and press my hand into it " Hes a poet and he don't know it

[@surrouund1452]

Try using the styrofoam slicer to cut gallium

[@OtherDalfite]

ArcSoldier 117 and put gallium fumes in the air? Great idea!

[@nathangamma3504]

It will just melt

[@chromepunkk]

OtherDalfite lmao im very sure the styro slicer doesn't reach gallium's boiling point(over 4300°f)

[@OtherDalfite]

LilRowdy it probably doesnt. Im no expert on gallium but i know mercury fumes can be generated even if its just sitting in liquid form. Boiling point does not have to be reached for vapors to be released

[@blaisevitale4037]

What happens when you mix permafrost and antifreeze

[@he1882]

Lil Spooder DEEZ NUTZ. DEEZ NUTSZ IS WHAT HAPPENS

[@RealHankShill]

Permafrost is just frozen land. So, you would wind up with a chemical spill on frozen ground.

[@bbs5918]

Hamza Raza does are some deformed nuts you got

[@elijahcormier5239]

OLD MEME. OLD MEMES ARE DEAD!

[@yungjays5533]

Big boom

[@zeked3413]

You should also try to freeze kinetic sand with dry ice or something

[@keikoscorner4176]

Hey, so not sure if anyone else caught onto this, but looking at the spots were the sand was embedded into the metal for the third one, that was the area in which you were pouring the metal. So What I think happened was that the liquid metal was making gentle pushes as it was landing inside the mold and that is why sand is in the metal when it cooled down.

[@denislavrov779]

next episode: casting sand into kinetic metal.

[@juanverdusco620]

What happens when you freeze gasilien with liquid nitrogen or dry ice will it still burn or start a fire?

[@DarkestDeeds]

Gasoline itself doesn't burn. It's the fumes in the air that start fire. So, if it still makes fumes when flash frozen then they will burn.

[@prussr1885]

Gasillien

[@crashey2224]

There was a video of this already on tkor

[@StarringMac]

Liam Ramos did you just try to correct his spelling and get it massively wrong too??

[@tendorshock]

What would happen if you put Kenetic Sand in liquid Nitrogen?

[@fleecemaster]

it gets cold

[@alexlowrie03]

Fleecemaster 😂

[@skyeelexus]

Legokyleman-Roblox hebhrhhwghhb

[@josuedavidmontoyachavarria9968]

Fleecemaster A poco se pone frío?

[@fostersmith1450]

It would been easier to use gallium Edit: nevermind they did

[@fizzco3373]

Melt glass putty and boil it in acid!

[@kermitthedog7372]

Fizzco yikers

[@seairadouglas-kent2282]

Diis it

[@charitysummerlin8309]

You should melt down old jewelry and make king of random jewelry

[@deanrobitaille9992]

That would be cool

[@chimialotl]

4:48 this is how our hands evolved.

[@Razzy.7]

Frizy007 s

[@riripari2042]

4:15 Is when they actually get ready to pour on the aluminum. 7:26 is when they pour the gallium. Your welcome.

[@Mannisworkshop]

Dat sand got ALOTTA DAMAGE needs FLEXX TAPE !!

[@NXNDR]

Updated Arc Reactor. Since the foundry got updated\upgraded, do the arc reactor. Maybe try compacting the electronic parts and enlarging the chamber? Also try a portable foundry. Idk how, but yall are amazing so should be easy 😁

[@connorrobinson6949]

didn't they just make a paint can foundry/forge?

[@maxxiang8746]

an arc reactor is not a forge

[@connorrobinson6949]

Max Xiang I was referring to the "portable foundry" part of his comment. I understand a forge is not an arc reactor. maybe pay a little more attention?

[@maxxiang8746]

oh ok sorry i didnt see that part

[@NXNDR]

Max Xiang no dip

[@grimknight6409]

Can you do glass blowing? This was promised along time ago and I really want to see it.

[@rknaik76]

Try spraying fly ash or coal ash before pouring the molten metal. That gives a layer of temp withstanding material and smoothens the edges which touches the sand.

[@Impaled1666]

This was a totally cool experiment idea Daniel ! Thanks man !! 😀

[@hupersappy3476]

You should try extracting lead from lead paint!

[@mystified2356]

Hupersappy Cody has done that before, it’s a cool process

[@hupersappy3476]

Mystified 2 can you give me a link to it?

[@laterjake]

Hupersappy look up "metal refining and recovery lead from lead paint"

[@Ivan-sc7st]

What's Cody's lab?

[@kylesebring1062]

And YOU should try extracting polymer from nylon

[@stabstallion6612]

try to use the power sand to make a water filter instead of charcoal

[@gggalaxywolf1740]

I want to see you make a plastic cup into a Barbie sized grill cheese

[@mindfulgratitude3041]

where can u get gallium for melting projects?

[@Errorsnake]

Amazon

[@Alpha-zv9vo]

EBay

[@davidc.]

Walmart

[@angelosp07]

Online

[@cristiancoman945]

Dig

[@leon.i1882]

Can you do a Room Tour?

[@Zeka00]

Try if you can Crush Kinetic Sand after bathing Liquid Nitrogen..😁

[@niaschim]

👍

[@michaelmorrison8156]

Bad Boy 👍🙌

[@nabriss]

Bad Boy 👍

[@Ella-mj8tp]

Molding Grant reminded me of Star Wars if you know what part I’m talking about

[@maggiezhao9056]

Is it Han Solo in frozen carbonite

[@YAGAMOTIVATION]

Can a magnet attract melted medal ?

[@spencerwhite3400]

No. For something to be magnetic, some extremely specific requirements must be made that almost no liquid can match.

[@spencerwhite3400]

The most well known magnetic liquid is ferrofluid (ferro - iron, fluid - liquid), which is a small amount of iron suspended in water

[@cagleccc]

There is the curie temperature, which is where materials lose their magnetic properties at a certain temperature.

[@AlexA-cp5nb]

Mr. lyrics yes, it is just dangerous for the bearer of the magnet, but some metals aren’t magnetic, so be sure it is a magnetic metal to begin with.

[@j5892000]

Yes it can be.

[@jadet9968]

what happens when powder gets mixed with oobleck

[@ariannajohnson6492]

Jade T I wanna see that too.

[@melindah7629]

Can you try to cast molten metal into 3D shapes ! That would be cool!👍🏽

[@rhiannamae6075]

You guys do some of the coolest experiments!

[@Natakue]

I'm wondering if you could use the sand to make a two-part mold with silicone. as in use the sand and the bottom of the two part mold by poring the silicone, letting it harden then remove the sand to make the other portion of the mold.

[@angelacuna9884]

Now this may look and smell like brown sugar but don't taste it it taste like sand

[@mambodog5322]

This implies that you tasted it

[@baelynnray]

The king of Random, please make a silly putty casting with gallium.😁

[@1969ChevroletCamaro]

Melt like 3 gallons of Galiam metal, into a 5 gallon bucket then put your feet in it. Then let the Galiam dry and harden around your feet just for fun, Try to see if you could move your feet at all in the hardened Galiam. Then melt the Galiam again too free your feet

[@jarodbelisle7876]

Fat Sunny body temp would melt the gallium and never be able to harden around your feet

[@1969ChevroletCamaro]

@@jarodbelisle7876 That's what I was also thinking

[@Smilomaniac]

Sent this suggestion via mail about two years ago, when you had trouble with the radiation symbol cog.

[@tilengasparic6765]

feel old yet?

[@IndelacioLetsPlay]

Can you build an igloo with kinetic sand and not have it collapse? I'm sure if the density holds together in bricks you could make a multi-coloured igloo. (even if you have to do it in miniature)

[@retro6027]

try pouring molted metal into super glue it might be very cool

[@THESLlCK]

Retro No, it will just make a plume of smoke.

[@newborn_kitten]

"Using SANS to try to cast metal" i heard that. lol. dont tell me that it was sand. i know that already. i just heard sans.

[@creativencuriousOfficial]

Plz Try Putting Dry Ice in Molten Metal

[@hourbybird3605]

Creative n curious Official aI have no idea what I’m talking about but I’m just gonna post it

[@axolotlife677]

WHYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY !!??!?!?!??!!?!?

[@Hyacinth77]

They have done that already go find the vid

[@UsagiMiyamoto]

@@axolotlife677 wwwwwyyyyyyhhhh are you doing that

[@unique._me2951]

try using a pool of obleck and put the liquid metal in the pool (awesome idea!!!)

[@mr.burrito5591]

(Not awesome idea)

[@turkeykrul5336]

@@mr.burrito5591 (its just a kid don't go hard on her)

[@seliann]

Sounds interesting

[@mintyarcturus6826]

true dat

[@couchpugato2179]

The problem with that is, oobleck requires pressure to become solid. Without any pressure, it stays liquids. If you melted it in, it would mix together.

[@jayniegutierrez7224]

He had to much fun pushing “mini Grant” into the sand XD

[@apistogramma4521]

The question is, does it still work with molded brass having a melting point of 1083°C!

[@owengraveling4794]

Microwave a grape

[@alexw3511]

Yes

[@CBL06]

His microwave would explode if he doesn't cover it

[@vmackery9715]

Why?

[@CBL06]

@@vmackery9715 It will turn into plasma

[@mambodog5322]

There are two things that turn into plasma when microwaved (that I know of): Fire, and grapes

[@marnieshaw8858]

Shouldn't this be the *Kings* of random?

[@hovlogs3851]

How bad are you

[@vmackery9715]

Wear is grant

[@bonopopo9939]

Obviously

[@balckbelttime]

Could you use the thing you did with baking soda and super glue to cast something? Or make a mold that could withstand the heat of molten metal(or chocolate)?

[@ConfusedKazu]

You should try Doing stuff with non Newtonian fluid (aka ooblek). It defies the laws of physics. I made it before. It was fun until it molded. Try doing things like putting it in a vacuum chamber or trying to cast metal things into it or combining it with metals to see the creations.

[@bowtonringmaking8752]

Coconut in vacuum chamber

[@solace42O-l8b]

i think it will crack but it will be awesome any way

[@jenweng7107]

Why?

[@raza45_________82]

The intro looks so 90's themed

[@nathangamma3504]

raza45 _________ and I love it

[@raza45_________82]

Nathan GAMMA lol mee too

[@ryanwood891]

I wonder why

[@NoctN7]

Are you able to harden Aluminum like you're able to harden steel once you get it to critical temperature and then quench it in oil? I am 14, but I love studying metallurgy and Im reasonably curious because I don't have the tools to experiment myself.

[@THESLlCK]

Nocturnally To answer your question, no. If you compress it, it can become just as strong as steel.

[@NoctN7]

I figured it could work harden, I just didn't know if the crystalline structure could become martensite or not, thanks man! :D

[@shamlzyoyo3938]

Can you find a way to make a super bouncy ball. One that will bounce more than 25ft in the air.

[@kr4zyy]

What happens when you place Kinetic sand into liquid nitrogen? (Will anything happen to the viscosity, will it harden, etc.)

[@dimactavicus]

kr4zyy nothing but cold kinetic sand

[@TrollSmashXD]

You used my idea

[@ionlyplaywingman]

can you try casting galium into aluminum?

[@gurimisenpai2358]

OOFie Why tho?

[@nathans9972]

Because he can

[@عبدالرحمنهندي-ل2ط]

Make a slime with super glue

[@physicist7459]

You cannot, its gonna be solid

[@peacelover7074]

It has an very solid bonding

[@stevenshaffer4762]

You should use a Barbie and put it in kinetic sand and then use some type of metal and put it in there

[@lemscem5173]

Still the intros are changing pretty much every other video

[@theblackbeltcuber6626]

Mix molten metal with superglue

[@Baul3680]

That is a very Christian hand...

[@jaycevines7492]

Amen

[@cityandsuburb]

May I ask, what is meant by this phrase.....? Merely academic interest....

[@waveplush5420]

There is no middle finger to symbolize vulgarity, therefor in the eyes of a Christian-very pure.

[@-void-6465]

it can't put up the rude finger

[@joorff1351]

You should do a video where you make a bunch of metal alloys and see which one is the strongest. (Edit: hi I have just found my comment after ages of not seeing it lol.)