THE BEST AUDI HANDLING MOD - 034 Motorsport Rear Sway Bar & End Links

Subscribe if you're new! Thanks for watching. Today we installed the 034 Dynamic+ Sway Bar on the B9 Audi S5. Since this car is seeing some track time, this upgrade is an absolute must. Here are links to the products we installed, as well as the detailed installation guides from 034:
www.034motorsp...
www.034motorsp...
www.034motorsp...
www.034motorsp...
Follow me on Instagram! @S5_ KevG
Follow me on TikTok - KevG_Cars
Camera Gear
DJI Mavic Mini - amzn.to/2VgaRZn
iPhone 11 Max Pro - amzn.to/2Vkgohk
Products I use! Some links may be affiliate, meaning I get a commission on the sale. Thanks for your support!
Car:
Similar Style S5 Grille (not exact same) - amzn.to/2Tauox8
Underglow kit - amzn.to/3fPAclQ
Detailing:
Turtle Wax Hybrid Solutions Ceramic (Currently 21% off!) - amzn.to/3dgAlQ1
Mequiar's Ultimate All-Wheel Cleaner - amzn.to/2UDhYf6
Chemical Guys Microfiber Wash Mitt - amzn.to/2xKnvHO
Adams Interior Detailer - amzn.to/2xH2z4I
Mequiars Hybrid Ceramic Spray Wax - amzn.to/2R1oU3C
Microfiber Towels (12 Pack) - amzn.to/2UBAHrH
#034Motorsport #Audi #Mods

[@empireanglers8604]

Great video! But, those endlinks and brackets should've been torqued at static ride height. You've introduced lots of preload tightening the bolts while the wheels were in the air.

[@KevG]

I’ll make sure to bully Rory

[@thomasd8735]

Does that really make a difference?

[@jonathandeuire6962]

@@thomasd8735 says to do it in the 034 installation instructions. And yes, If you don’t, you feel the binding (preloading). Also, there are torque specs for the sway bar brackets on the chassis

[@wishhh1644]

@@jonathandeuire6962 where can I find the torque specs for my Audi b6 2004?

[@slidesear]

I found out that the end link’s rubber bushing will twist if installed while the suspension is not compressed to ride height. 034 told me that it will cause premature wear on the end link bushing (because the bushing is in a fixed position and only designed to move a certain amount).

[@GizmoAudiS5]

Yo Kev.... watching you put those spacers on your B8.5 S5 I ordered 25mm all the way around because I wanted them all equally pushed out, and I must say, my fitment game went super saiyan God haha... Like the videos keep it up, gonna start dropping my journey in my B8.5 S5 stage 2 034

[@909jacoup]

Facts bro.. I have these on my S5 b9 .. The entire driving dynamics changed.

[@KevG]

Crazy difference

[@vdubster_mk7181]

Changed in what sense?

[@M22detailing]

We need to do a driving test! this is by far one of the most effective mods we have done!

[@KevG]

Makes sense why so many people do it🤘🏼🤘🏼huge difference

[@GARRYEASTON]

It would of been much easier to access the top bolt if you had taken the wheel off. Plus you need to pay close attention to the bush to ensure you are not damaging it as you are undoing and retightening.

[@macdaddy1234ism]

Damnnn I’m trying to catch up!! Wait for a couple of mods for me when I get done ✅ lmao 😅

[@KevG]

More mods just came in the mail for this car😂😂😅

[@macdaddy1234ism]

@@KevG looks like the car is going to sema car show next year in Vegas ..

[@thomasd8735]

Does it matter if the wheels are hanging or if they are supported (like on a lift that you drive onto)

[@jonathandeuire6962]

Should do it at static ride height so ramps are better

[@yrichard6404]

Which setting you have it on? Soft or hard?

[@KevG]

Hard

[@VegasStacker702]

I dont understand the use of the rubber gloves.

[@KevG]

Keep the hands cleaner than without 🤷🏼‍♂️

[@M22detailing]

why would you want dirty hands when you can have clean hands??

[@022rty]

Dumbest comment you'll hear all day I promise.