GET YOUR HANDS ON THE DOWN4SOUND SFX MIDS OVERVIEW PART 1

Our SFX 6.5 car speakers are designed to produce crisp and powerful sound with clear MID RANGE! Sold as a pair, these 6.5" mid-range loudspeakers have 200 Watts total RMS power per pair, 92 dB sensitivity, ferrite magnet, 1" voice coil size with a frequency range of 100 Hz - 9,000 Hz, and single, ON A SVC 4 Ohm voice coil impedance.
SUPERIOR CAR AUDIO UPGRADE: If you're still using the same old factory stereo speakers OR want to upgrade your sound AFFORDABLY, get ready to be amazed by what THE DOWN4SOUND DIFFERENCE IS! The main difference between OEM, & OR ANY OLD SPEAKERS NEEDING REPLACEMENT, IS THE Down4Sound SFX65-4P door speakers ARE like night and day different. CLEAN AND CLEAR WITH DYNAMIC AND SMOOTH SOUND REPRODUCTION! We made ARGUABLY & PROBABLY THE best bang for the buck 6.5 MIDRANGE SPEAKER without compromising quality areas that matter. We truly set out to make these AWESOME and AFFORDABLE for your vehicle.
DURABLE CONSTRUCTION: We use high-quality materials and manufacture 6.5 speakers precisely to ensure they sound great and will last for years, even when used daily. We made these with a premium-grade paper cone and the silver phase plug, which has been thoroughly tested to work perfectly together to last a long time.
EASY INSTALLATION: Our car speakers 6.5 comes with the same size spade connectors for an ease of mind installation process; the same size means less time to find the dreaded different size connector. These are universal 6.5-inch car speaker pairs and most likely will work in a vehicle with 6.5" OEM or custom doors equivalent with 6.5 speakers that need to be replaced. These fit into most doors with very little to no modification.
At Down4Sound, we know that you want to be confident in your purchase of our door speakers 6.5, and we will do everything possible to provide you with the best experience.
SFX-65 4P SPECIFICATIONS:
Size :6.5"
Type : Mid-Range Loudspeaker
RMS Power :200 Watts pair
Sensitivity :92 dB
Sold As Pair
Magnet Material : Ferrite
Voice Coil Size :1”
Frequency Response 100 Hz - 9,(000) kHz
Voice Coil Impedance Single 4 Ω
SFX 65 CUT OUT INFORMATION:
Overall : 6.6 inch
Bolt to Bolt Cutout: 6.2 inch
Cutout: 5.9 inch
Depth: 2.7 inch
********************************************************************************************
INSTRUCTIONS FOR GIVEAWAY!
** YOU MUST BE SUBSCRIBED TO THE CHANNEL**
1. LIKE THIS VIDEO
2. COMMENT WHICH SIZE MID YOU WOULD RUN IN YOUR VEHICLE AND HOW?
*MUST PROVIDE MODEL NUMBER*
AFTER 24 HOURS OF THIS VIDEO BEING POSTED, WE WILL COMMENT ON THE WINNER
FROM THE DOWN4SOUND PAGE.
********************************************************************************************
You can purchase the SFX Series Mids from Down4sound in the link below
www.down4sound...

[@nathancarr7588]

Sfx65 in the rear deck of my car would make me so freaking happy. I've been shopping/ comparing budget speakers for days and it's almost as if this was a sign 🙏

[@adamnorwood8084]

I’d love the SFX65s to put them in the ram doors on the JP234 that I already run. Brodyman would love them

[@RJSDZNS]

I'd run the SFX 6.5'S for sure. 92 db is stupid good for the price! I'm running the JP8 in my system now. Love your products!

[@douglascabinatan6042]

whats the good/top tier DB level for quality speakers??

[@RJSDZNS]

@@douglascabinatan6042 hertz spl show

[@brs5490]

A pair of the 6.5s would sound great with my JP84. If I don't win I'm still buying a pair.👍🤟

[@rickeyredz]

Will 2 pairs still be good enough with jp84?

[@likemegapolis]

Sfx-8 for sure! Love that midbase from 8 in speakers!

[@nitrous_3E]

can't wait to get mine, they'll be here Monday!

[@jacobwillens]

I’d run the SFX80 for sure. I have x2 6.5” and 2 tweeters in the front doors each. But I had to move one set of the 6.5” from the rear doors for the setup. so I am empty in the rear right now. Keep up the good work! Love the vids and appreciate your business!

[@vandekampsteve]

😅😅😅😅p pop p pop pop po poopoo loo Koop pop pop koi ooo😊 I😊

[@GregoryStackingtons212]

John Cena in the face with the Richard Gere from the nose down to the chin 😂😂 Definitely informative as always, but I had to say it.

[@lescarr1811]

Great deal. I would get the SFX6.5's and power them with my JP84 and run them in my front doors of my Nissan Frontier.

[@TokenTombstone]

Howdy. I would run the DOWN4SOUND 8" SFX80-4P in the rear doors of my Honda Fit if I had a set. Right now I have a Rockville DB55 running the stock speakers and have been planning on upgrading those. Can't wait to finish the build out.

[@dougiecabinatan1408]

Definitely would rock the sfx 80!!

[@franklinwalker9606]

The sfx80 seems to bee a owesome deal for the price.. looks good sounds great... It would be a good request to get in the doors💥💥

[@christianvela455]

I would pick the sfx 6.5 in my 2007 chevy equinox and I have a d4s jp23 4 I think they would sound great I love ur products sell build and great quality keep up the great work and thanks for taking the time to show and explain ur products.

[@drewdavis239]

Sfx65 for sure in my e39. Running off my new jp95 !! (With a 10tw3) been shopping mids for two weeks , cant decide

[@timknippjr6911]

I could use the SFX65 to add to my rear deck they will be powered by my Sony amp they will run with a single 12" shallow down fire pioneer sub in the trunk. Thanks for the chance to win them I would love to hear how they sound in my setup. Good luck to all the entries. Thanks price and Down 4 Sound! .boom boom.

[@corryszam]

I would definitely run the SFX65 in my front doors of my Nissan juke they would go great with my new USCMR-654 that I just received and of course my apocalypse 10 inch 🔊 10:36

[@LoveMyStateFLA]

This is dope I like the white contrast.

[@noahvargo4919]

I would pick those SFX65-4P 6.5’s for my Lexus GS400’s build, I’d power them with my CT sounds 6 channel mids/highs amp

[@firstplacelegendgamingmore9800]

I'd do the SFX65-4P's 2 per door in my yukon with a jp84 amplifier. I was just looking at these today on down4sound they are in my cart with a jp84 lol

[@Sheldon-fz4kf]

I would run the sfx65 for my first build in my ford ranger. I’d put the on my pioneer 4.300 that I was gifted for my first build.

[@mkloudsql3285]

Killer product for the price good job JP 😎

[@mkloudsql3285]

Oh and sfx 8's

[@derekfoster8829]

I'd love to put a set of SFX65 in my 07 Cadillac Escalade ESV an power it with a JP234 I've been looking at door speakers for a min I already have a couple things in my cart on the site. I love what your doing keep up the good work JP!

[@david029014]

Just installed a pair of 6.5 in my doors sound really nice and loud on head unti power. Installing 2 more and 8" on rear deck tomorrow

[@chriswein1531]

You are killing right now! The fact that you explain everything. 👍No one else does that!

[@alexmartinez7687]

SFX65-4P would love to run these speakers to replace my current pair of speakers on the back part of my work truck. One of them the glue fail and cone is making noises. Could always use more mid range, specially coming from you guys. Currently running two strap jp23s V1.5 all 0/1 gauge wire 320 amp alternator Recoil amp for mids and highs. 6 speakers and 2 4inch tweeters. Loudest farm truck overall Loudest truck in the small town of where I live.

[@F1oridaboy420]

I would run the sfx65-4p in the custom speaker pods I got on my 03 f150 and i would power them with my AAB-800.1

[@CrystalClearSQL]

Super dope, matches my truck at the moment... And they'll fit in both the doors and behind the seat! I'd run the SFX65-4P"s for the front and rear mids to be honest. That would be AWESOME! I'm really feeling the white basket... and the gorilla logo. The SFX 6.5"s will pair perfectly with my 20 year old 200 watt jvc amp... that i really need to upgrade to a JP84. Seriously. Lol

[@hooptastic_hippie8522]

i would pick the sfx 6.5's on my jp234 ive already got to go with the 4 sfx 8s that im getting to go in my back dash of my 2015 toyta corolla s, and ill see you again this year at Slamology! ill be hitting up the merchh booth again and getting a demo in that beast again

[@beatnlowlow9353]

Sfx65-4p would be a great upgrade in my 02 bmw with factory speakers

[@ryan404]

I would run the SFX65-4P and run them on my Rockford Fosgate Punch 500.4. I'd even be open to trying out the 8s though it would require a little modification to get them in my doors. Thanks for continuing to bring quality products to us D4S!

[@ganeshnarayan5505]

Yeah man i would love to have SFX8 On my 2011 Tahoe run with JP234 it will sound dope. Down 4 sound has some cool stuff plus it's cheap.

[@bradleyumphreys9124]

I would use 2 PAIR (4) - SFX8 - 8 Inch Midrange Speakers with JP84 - 4 Channel Amplifier in my 1995 Chevy Tahoe. I also have a Zv6 10” with sia 3500 combo and 400amp elite mechman from down4sound!!!

[@katiemitchell6887]

I bet that would slap!!

[@evan.norwalkcalifornia562]

🗣️I need mid bass 6x9s...make that happen 😏

[@jordanhavel931]

I would step my rear door mids up to a 6.5!... currently 5.25s and man they would punch those mids notes so much more with a bigger dia.

[@jordanhavel931]

Absolutely love what you're doing JP!

[@TokenTombstone]

Get the dremel out and spring for the 8's :D

[@jordanhavel931]

Lol hmm maybe even a custom box for them in the kick!.... gotta win em first! Lol

[@MrCountmein3]

I'd put the sfx 6.5 in my car if they were free for sure. I'd hook them up to my audio control D6 1200.

[@markroberts715]

Dominate that audio market jp!!

[@katiemitchell6887]

I would run the sfx 6.5s on my jp84! Yee yeeeee

[@DjDioxis]

I'd run the sfx65-4p's they would pair great with the JP84 I bought from you 👍

[@sethsharer]

I would probably pick the SFX80. Haven't gotten to start the system yet but I've got a jp95 waiting(bought when they first released and has been sitting still brand new) Although with the power the JP95 puts out, maybe a pair per channel at 2 ohms. Have a pair of skar sdr 18s for the sub channel

[@Produccioneskingdom]

I order a pair of the 8 inch about 2 weeks ago ,they sound amazing with a timpano 125 watts per channel amp , i just order more of those speakers

[@tristanloftis]

Ordered my 3 sets. Weird how I was looking for new mids and this comes on the notifications.

[@joeyblessing552]

I'd rock the SFX65s for sure .... And I'll probably buy some even if I were to win, at least a pair to fill out all 4 doors!

[@MAKSporter]

I would really enjoy the sfx65's in the doors of my HHR for additional vocal presence.

[@jackvest5693]

I would enjoy the sfx 6.5 4 ohm in my doors and a scar tx 6*9 4 ohm

[@MrGame31373]

them 8s are amazing sounding.

[@BLACKEDDY918]

I would run 6.5 mid range bass and 6.5 mid range speakers. the sfx 65-p4 in all 4 doors of my 2019 chevy equinox and im ordering mine this week

[@FOXCRF450RIDER]

I would run the SFX65-4P. Was just thinking of some mids when this video popped up.

[@bh_rob5532]

I’d run four of those SFX65 on a jp84, perfect match

[@mixxinmel]

The SFX65's i would run in my jeep back doors on a Audiopipe 4 channel amp. Frequency response is right where i would need it to be. Power rating is great for my amp.

[@THELIFEOFPRICE]

Congratulations! You are the winner of the SFX miss giveaway! Thank you for supporting D4S. Please reply with your name and email here or in a private message , so that we can get your shipping info to claim your gift! Make sure you are replying to this account

[@adamchristensen2217]

Sfx 65 I would replace my pioneer 6x9 in my 2004 ford f150 I would power them with my 200 watt Memphis. I’ve been wanting to try your products. Been thinking about trying to build my own door panels. Really love your videos and the information I gain from them. Has helped me a lot with setting up my budget build

[@TokenTombstone]

Yeah people have some TEGERDY. Didn't expect a good lesson in an audio sales video but it's important none the less!

[@CrystalClearSQL]

Thought this was merica mkay

[@paulwenzel3114]

I’d use the SFX65. I’ll run them with my sweet purple AB 4 channel. If they rock out? I’ll trash my MB quartz and go all D4S. Thanks JP, your amps are killer!!

[@seanchico85]

I would run the sfx80 in my rear doors, I have 2 6.5 in each front door all ready and 3in tweeters. I would run it all off the jp8 that I just ordered, that should be arriving tomorrow. D4s for life 💯

[@jahlieel.e7856]

Maaan that's my set up right there i will do 4 sfx80 and 8 sfx6 with some tweets n get another jp234 amp to add with my jp234 that I already have for my doors. Bro u making my day with these here thank for the update

[@jaydenbessett5986]

Id run the sfx 6.5s that’s what’s factory in my doors and still have factory door speakers from 30 yrs ago, in dire need of upgrade and they are a great price

[@jessemorales1686]

I would pick sfx80 for my new speaker box.👍

[@aliciaANDanthonySandoval]

What's a good choice for a mid(6.5 or 8) for 60hz to 500hz? I have a sundown xv3 so I need my mids to play a little lower (60hz) and about 150 watts rms each. I would run the sfx8 in my doors of my 1998 Sonoma on a Orion 500.4 amp...😉👍🏼

[@jasonpiegaro6678]

I'll take some sfx65 4p! Love to see you doing these things. Id like to see a 2 way component set from you. Also some 2 ohm mids so we can get the most out of our amps would be awesome!

[@that_ducati]

I would run the sfx65. 2020 western star, jp84 Amp. Let's gooooo d4s all the way.

[@twonative7564]

Definitely going to be getting 2 pair great price

[@richardrivera7684]

I would definitely like to run the sfx65-4P

[@Gnsmth91]

I would love to run a pair of the SGX65-4P speakers in each door of my Cherokee with a JP95 Amp to power it all!

[@scottbe1]

I would love the SFX 6.5 and I would put them in the doors of my 2007 Honda accord. I need louder speakers to keep up with the sub!

[@kelslife2932]

I would pick the SFX 6.5s and put them in the doors of my car and power them with a JP84💪💪

[@natecamp2585]

I would pick the sfx 8s and power them in the doors of my gmc yukon with my beautiful jp8 that way I can get rid of the junk skar 6.5 I have in there now.. I have been buying products off down for sound since I got the jp8. Down for sound for life!!

[@boominc0420]

I would pick the sfx80-4p for my doors of my 99 s10 blazer and run on my jp34ab!! Can't wait to have a pair .

[@dennischisolmsr2308]

4 of the 6.5 across the rear deck on a class ab blended with 2 nice tweets would be super musical. Along with 4 on doors on a class d for extreme output would be a setup. These sfx's would be hard to beat.

[@keiththiering8871]

SFX65 4P would drop in factory location 2016 Focus. Just had the JP34AB get delivered a few days ago so I definitely have power covered.

[@alexpickering7725]

My Dad's truck could use the SFX65-4Ps for sure! He's strugglin with some cheap alpines right now.

[@cedricwilson4771]

Bro said you wanted a cheap as speaker here you go you better not ask for nothing else🤦🏿‍♂️🤦🏿‍♂️🤦🏿‍♂️🤣🤣🤣🤣🤘🏿🤘🏿🤘🏿nice video

[@BriefcaseBanks]

SFX6.5. 4 of them in my Honda fit!!

[@sethgt1234]

Jonathan I applaud you for how hard you have been working to put out your own line of car audio. I could only imagine how much stress it would have to be to do it. Obviously you are killing it! I just bought a JP 104, I can't wait to get it hooked up. I am about to buy some of your tweeters and 6.5's and 8's, but I have to wait until I get my new debit card, because Klarna won't let me use mine because it expires Within 2 months. I could buy them right out, but it is definitely nicer to be able to make 4 payments overtime. 🤷‍♂️

[@earlholyoak12]

I would pick the sfx65 for my cadillac ats I will power them with a jp Amp of some sort so it matches my jp63

[@benjaminwest6277]

I would definitely choose the SFX80-4p for sure. I’d be running them on a Hifonics Zeus 600.4 amp. They would be going in my 2002 Chevy Silverado because I’m tired of stock speakers.

[@adamnorwood8084]

I would the SFX65s on the already jp234 that I’m running in the doors of the Ram. BrodyMan would go nuts

[@74midwestbass74]

Nice! I would run 1 pair of the sfx 6.5s in one door along with another pair in the other door of my new 2023 bass van build! Along with a j p 84 or two

[@Nissanalltheway]

I would pick the Sfx 8 thanks Jp

[@dagriz]

You nailed it about responsibility. 🤘🔊🔊🤘 Keep rocking!! Oh and I would pair the sfx80 4p with the jp8⁴ I have already.

[@_Dailydrivenmuscle]

I just bought 8 of the 6.5 so now I WOULD L I KE THE SFX80!!!!!

[@rebelliousrebel420]

I'm going to run the SFX65's with my MTX Thunder 4002 in my '92 Toyota 4x4 truck build with single Audio Technix 15"

[@erikvalencia3847]

I'd run a set of SFX 6.5's in my Silverado or 2 sets. To power them I have a jp 23⁴ amp power some deafbonce mids. Moved all old JL Audio equipment to D4S for this new year along with sundown subs 👍👍👍

[@blackorangestreetroxpi2968]

Jo bro I'd run 6.5s on my honda civic to have a better sound with my 1k watts sub because my mids sound like shit when I turn the volume over 50% I want to rewire the whole audio system and I would be very grateful to do this with D4S Love your videos Greetings from Germany 🇩🇪

[@noelsantiago8613]

I would do the SFX804P Thank you D4S!

[@bigdamn28]

sfx 65, would match with my lw 65 and will raise my tweeter freq

[@dolphobama6091]

id get the sfx 80's forsure, a pair of those would be good for a cup holder delete

[@kreationsbodyshop]

id run the sfx 6.5 for sure. in my 94 ford f150 using my kicker 400.4 amp

[@mexkicks]

I would like the sfx65 going to use them on my civic with my jp84 😊

[@joshuaherring6504]

I would choose the sfx65. I would put them in the rear doors of my 2013 f150 LIMITED 4x4. I will power them with 2 channels of my 460 watt pioneer 4 channel amp.

[@derrickvaught8335]

I'd like the SFX65 for my 09 Fusion !

[@markbradley769]

I would put four of the sfx65 loudspeakers in my 2000 gmc jimmy and would power them with a jp84👍

[@karlhessen3904]

I would run the SFX65s with a JP amp for sure

[@gigante6627]

Id def run the SFX80 in my audi a6 for that crisp mid range

[@twinturbotony93]

Mid-bass is really what my foxbody mustang is missing. I'd like these in the sfx80 in a custom enclosure running off my Rockford t600-4. I plan on getting a jp77 for my 04 mustang. It will b perfect too cause my car is blue.

[@MrAdeesmith2]

I would put the sfx 6.5 in my sons truck on our JP234. I would also add the JP8 on a x8v3

[@polkfam2761]

I would pick the sfx 65 and put them in my 4runner build front doors! And run them with a jp84 amp!!! D4S !!!!

[@kerncod22]

SFX80-4p (set in custom pod made by me for each door) powered by the JP84-4 in my Subaru Forester--- got the booty filled with an 18” ZVX powered by the JP23, (won on FB) :) if I win this set of speakers I will DOUBLE DOWN and order another ZVX 18” and BUY ANOTHER JP23!!! (Will definitely need these speakers to balance out the (((BASS))) and having matching amps to boot will just looks so sexy!!! Thanks for giving back and having good prices!

[@david029014]

sfx65! in my 2018 honda accord!

[@shaunkimberling214]

I would love to get the SFX65 to load my 2015 Toyota Camry doors up for my SQL project powered by JP84!

[@337amm]

I was about to buy a set of the 6.5's, to give them a try, until I saw the shipping.

[@robinhood8311]

I’d try the sfx80-4p in my Silverado front doors off a fostgate T400X4ad . Props on your amp line.. really has me curious.I’ll will most likely update my twisted sounds 2.3k to one of your d4sound branded amps. Maybe one day I’ll experience your ride 😂. You didn’t have it at the only show I attended.. long while ago… Austin heat wave. Keep up the innovation!

[@phobos221jp83]

Im waiting for the 10 inch mid !!!!