Let's Build! Starting The Assembly Of The Hangar 9 Ov-10 Bronco Rc Aircraft

[@thelightersideofrc]

See our videos early with channel membership! kzbin.info/door/z1KUoUoIlVIzWj21NQj0zgjoin

[@jorgeapping7974]

Jonathan how did you order this scheme because is not listed in Hangar 9 yet

[@thelightersideofrc]

@@jorgeapping7974 this isn’t a stock scheme. This aircraft arrived as stock. It was stripped, glassed, panel lines and rivets installed, painted and weathered.

[@davidsnyder238]

Having built two of these and still flying my original I have two recommendations for your owner. That's a great setup your using overall, the first recommendation is prop up to 22x10. 20 will fly it scale, 22 gives it a little better performance without a large penalty in wattage. I didn't notice any difference in flight time. Second , The elevator has some up trim in it, I had a ruler across the top of mine and it was flat across the top for tge elevator adjustment. Im sure you are aware but as someone who has been flying one of these for multiple seasons I thought you might appreciate the reminder 😊. This plane is a gentle giant and will utterly take off in 50' full flap and land in a 100 the same way. Looking forward to your usual master class in build and construction. Hope your well my friend.

[@thelightersideofrc]

Thanks David! Great info!

[@barrywinslow9798]

Beautiful.......well done folks. Thank you, and God bless

[@thelightersideofrc]

Thank you too!

[@kazama6245]

Wow! That looks great!!

[@thelightersideofrc]

Turned out soooo nice!

[@jrmotorsports55]

Beautiful scale work.

[@thelightersideofrc]

Joe did a stand up job! Looks so good!

[@thomasfluckiger750]

Would be an awesome plane for a dual x45tp setup😍

[@thelightersideofrc]

Yes for sure!

[@tdogrc]

Sat here with my morning Americano enjoying your videos as always. Great job Jonathan thanks 👍🏻

[@thelightersideofrc]

Thanks for watching!

[@Axr24have]

Another good vid Jon. I’ll be honest, prop planes are more my interest. And, i appreciate you starting a new build as though your viewers haven’t seen what you do - step 1, 2….. etc.

[@thelightersideofrc]

Thank you for saying that! I have to constantly remind myself that most haven't seen most of my videos. makes things repetitive on my end by I enjoy the process!

[@TheFurreid]

iconic aircraft!

[@thelightersideofrc]

😎

[@flyboywbl]

RC geek showed me you can use wood glue for hinges. Have not had a failure yet. Super easy and it cleans up with water

[@thelightersideofrc]

Very cool Suggestion! Thank you!

[@flyboywbl]

@@thelightersideofrc yep. Did my 1/4 scale Balsa D7 with wood glue and 1/5 scale FW-190. They have both held up well. Not sure I would try it on a composite jet, but into wood wings it makes life easier.

[@billyjewett5006]

My neighbor was colonel Dale Davis from the Marines who flew these and was CO of his squadron at MCAS Yuma. I was just a kid but he showed us everything in these. Cool to see a kit.

[@thelightersideofrc]

Very Cool!

[@jattle]

I have that Bronco, too. I would suggest (what I have done afterwards) is replacing the stock ball heads to some high quality ones, like gabriel or something. And for those who have not begun yet, also replace the hinges for better ones.

[@thelightersideofrc]

😎

[@ramonmedina1974]

finally! Yessss!!

[@thelightersideofrc]

😂😎

[@Sluf7]

Dam that's a lot bigger than it looks.😅 Yeah have had 3 servo,s in burn in fail so far all in the last 2 years😮😢. At least ya got plenty of room.❤ Good lot of work completed and nice easy fitting. 😅 Looking forward to the rest of build. Nice to see Nez keeping a handle on quality control.😂 Keep at it.😅

[@thelightersideofrc]

Fully assembled it's pretty nuts! Such an ugly but cool plane!

[@RTD1947]

How are the Pilots integrated into the programming...do they need function assignments..? Great video...love the details of what products you use and brands...and why....your building procedures and rational are "Bang On"!

[@thelightersideofrc]

In order to have control then need a function assignment. You could just plug the randomizer into an open port and they will always be on but better to have logic and control over when they are on. So in this case we will assign them to a function and program them to move with Gear down and flaps off or full type thing.

[@MsPokey1234]

Another Great Video!

[@thelightersideofrc]

Thank you Dean!

[@thomasfischer4380]

Have fun to Route the felt 500 Meter wires and 50 connectors. . 😅. But the last thing you need on this plane is a gyro. This thing flies like an oversized beginner Airplane

[@superskullmaster]

But this one is probably much heavier due to the rivets and fiberglass additions ect.

[@echosmoke]

@@superskullmaster its actually not much heavier than the original the fiberglassing is 3/4 ounce cloth and the rivets are vinyl and the paint is water based

[@thomasfischer4380]

​@@superskullmaster i dont think it will be much heavier. That printed vinyl wrap weights a lot. No compare to Oracover or Ultracote

[@thelightersideofrc]

Agreed but no downside to adding it into the aircraft. The owner can fly it on a windy day and the aircraft will look like it's flying in Zero Wind.

[@williamb.9110]

Nez is a blast LOL

[@thelightersideofrc]

Makes me laugh!

[@williamb.9110]

@@thelightersideofrc She was definitely a fighter pilot in a previous life :-)

[@thelightersideofrc]

🤣🤣

[@Frank-uq1wl]

Another hint: Maybe you try the ToolkitRC ST8 for your "burn in" process. It has four servo ports and some analysis capabilities. I think it would be more efficient and reliable. 😉☺️

[@thelightersideofrc]

I have one of the tool kit things. Haven't bothered using it for servo cycle process.

[@Frank-uq1wl]

@@thelightersideofrc I tried it last week and it works fine

[@LUKAS-BERKA]

Hi, can i ask you what joystick ends do you have ? I really like them 😀

[@thelightersideofrc]

They are radio master ends! Very pokey and grippy!

[@LUKAS-BERKA]

Thanks!

[@Jet-Tim]

oops the elevator cover/servo mount is up side down. That is the wrong one or it was built on the wrong side. That is why the link was too long. Love these Vids. I learned 2 cool things from you. 👍

[@thelightersideofrc]

😎

[@danahearn656]

I’ve got 1500 full scale OV hrs in the logbook to include this BuNo!

[@thelightersideofrc]

🤔

[@medscott2]

Jonathan could I get the link to where the owner got his batteries from please. And I also own the Hangar9 OV-10 and it is by far my best and favorite plane. Cant wait to see how you put it together.

[@thelightersideofrc]

I'll see if possible.

[@medscott2]

@@thelightersideofrc thanks you I appreciate it I know you are a busy man.

[@pilotmalc3432]

Not sure if anyone's mentioned it earlier but the metal coming off the lights isn't called heat SHRINK, it's called heat SINK. Did make me laugh... 🙂

[@thelightersideofrc]

Yes i'm aware. Sometimes when your working, videoing and going through the process the words don't come out right. 😎

[@blankblank9117]

I'm looking forward to this one!!!

[@thelightersideofrc]

Thanks!

[@jeffjackson6358]

Was there a specific Unilight kit you used?

[@thelightersideofrc]

Yes the OV-10 Bronco kit. 1/5th scale I believe.

[@austinpelser472]

Jonathan i think this is the fist time I'm seeing you do an electric bird and I've been a sub for a while🤣🤣🤣🤣 .....do you actually fly electric or are you jetted out

[@thelightersideofrc]

LOL. Thanks Austin. I enjoy flying anything but if I have a choice, Turbines win. Most other things don't give me the tingles.

[@MarkRenn]

Do they make systems where you could do this programming through a computer (keyboard and mouse) instead of through the remote? It seems like doing it through the remote gets REALLY tedious.

[@thelightersideofrc]

I don't think so. The Radio is simple and logical once you have done it a few times.

[@superskullmaster]

Why go thru all that trouble for scale with rivets and all that just to chose a 2 blade prop?

[@Captndarty]

And for a plain ugly scheme. I get sentimentality, but that’s a lot of effort for something that does not look that good.

[@echosmoke]

@@Captndarty are you talking about the aircraft itself or the refinishing

[@jeremygilbert3005]

Fot scale 3 blade prop size you need a gear to keep the weight in a controllqble area. I will to this to mine this winter, scale size is 23".

[@thelightersideofrc]

LOL. incase you haven't heard, props can be changed!

[@planespottingwithabdullah]

nice.what engines will you be using?and do you know the full scale bronco can do loops?saw that at they ar show here in not snowy like canada but unforunately rainy scotland.the bronco kept on looping.i forgot if it did aileron rolls though

[@planespottingwithabdullah]

wait,its electric?electric is nice,although i think glow would be better.

[@thelightersideofrc]

Covered in the video. GLOW????? HECK NO!!!!

[@antonyarnanova]

You lost me an electric….

[@Captndarty]

Good, go get lost

[@thelightersideofrc]

Ciao!✋

[@cymaz100]

do you get any paint to overpaint the horns an servo arms?

[@thelightersideofrc]

👍

[@cymaz100]

Nooo…shouldn’t be electric 😢

[@thelightersideofrc]

LOL.