Making a New Round Axle Beam for Trailer || Machining and Welding Trailer Axle Beam

[@fixituntilitsbroke2263]

Love how they install bearings by pounding them over the top of the welding spatter. Going to be great fun changing those out.

[@ИванСергеевич-ц4т]

Молодой токарь явно везунчик - до сих пор с глазами, даже двумя.

[@rcdogmanduh4440]

Precision made.. hammer fitted😮

[@ВоваВовин-з8ъ]

Я так понимаю, уровень технологии начало 20 века. Сурово.

[@horstmuller7512]

Good job! Now this axle is ready for next 10 miles before breaking down.

[@ahndeux]

Who needs grease when you have dirt as the lubricant.

[@khalidmahmood2373]

​@@ahndeuxyou see last his work? He fitted a green color cup for lubricant.

[@khalidmahmood2373]

​@@ahndeuxwhen this exle will be fit in wheecle then man fil the grees in that cup. no need 10 thousend miles

[@ahndeux]

@@khalidmahmood2373 You still have to pack the bearings. On top of that, they didn't even wipe the shaft as they drive the bearings in. Its all scored up. A really sloppy job by the people in the end. .

[@mikemilburn7823]

Yup, that's the extended life model, "100% more mileage than our standard life one, guaranteed" The standard gutter warranty, "once she's over the curb....you gotter". I believe as well, they used Doublemint instead of Juicy Fruit for the weld as it appears a bit...ahhhhh...lumpier. Also used was 5lb precision bearings rather than the usual 10lb maul fit. And all torqued up with a 2-1/2 lb maul...precision work.

[@TheConsettcowboy]

Amazing guys able to create what they can with limited resorces. Massive thumbs up from me.

[@ДядяВова-щ8е]

Хороший ролик! Надо показывать тем, кто просит сделать подешевле.

[@KazakovNik]

У нас это будет еще дороже.

[@khalidmahmood2373]

This exel is very cheep in pakistan. That peopel are not digree holder in this work butt very inteligent.

[@TK-zw8xe]

Maybe pack some grease in the bearings and keep them out of the dirt a good idea. I suppose the axle will work for long enough to get the job done.

[@bradanderson1627]

Funny how people can’t realize that what they think is so bad and scary is 100% normal for you guy’s. Think back 40+ years we where no different. I think these folks do a hell of a job with what they’re given and love it by the looks of it .👍👍👍👍👍👍

[@theunexploredskill]

but they are paid peanut prices 😢😢😢😢

[@ВладимирЕ-ф7у]

это где так у нас работали??? чтобы уж так совсем......

[@nipponsuxs]

I go back 40yrs and i never remember working on a dirt floor

[@Ruslanishe-rus]

Как вы определяете биение детали!?) На глаз! На какой? На шоколадный😂

[@HermanLeyva]

La berraquera de Melgar tol los felicito

[@eldeld7272]

Наши технологические парнеры))))))

[@imtiazhussain7815]

Excellent job 👍

[@MAXProcess]

Too bad you don't use eye protection both on the milling machine and with welding equipment

[@theunexploredskill]

My cousin who works in a factory in Karachi told me that they always get hurt from the particles of lathe machine

[@codprawn]

What milling machine? Only saw lathes and drills.

[@MAXProcess]

@@codprawn I was wrong.

[@horstmuller7512]

His guide dog said he don't need eye protection anymore.

[@MAXProcess]

@@horstmuller7512 I wonder if he himself can't think that if he becomes disabled he will no longer be able to do his job and feed his family

[@ВячеславСулимов-б7ъ]

О блин, виден небольшой прогресс, сварщик варит в щитке и рукавицах

[@Болгарин-т5р]

Как этот токарь и дожил то до своих лет, если он так с напильником лезет через крутящийся патрон к детали? Видимо, бессмертный!

[@Сыктым_Сыктымов]

Он знает этот станок как свои три пальца.

[@СергейНечаев-о7ч]

Я так и думал - сейчас намотает.

[@r0nin783]

И показали как делать,но не рассказали почему надо именно так,и традиции очень сильны в таких обществах

[@HorsleyLandy88]

Tapered roller bearings love a bit of dirt in them when new.

[@camposcasc7615]

Otimo video. Excelente apresentação do que não pode ser feito tanto em segurança pessoal quanto de maquinario.😮

[@TheMechanic868]

@@camposcasc7615 Thanks for watching 🙌

[@tarka38tara34]

wooooaaahh !!!!!!😳😲😲😲😲😲

[@sujaybhattacharya6562]

I dream it. Great guys

[@re-fix9678]

Nice❤

[@mat-bh]

Primeira vez q vejo alguem dessa galera ai usar proteçao corporal p soldar.

[@rickmcdonald1557]

It's always amazing to watch these guys accomplish so much with so little~!! But tell me I didn't see these huge bearings put on the axels DRY~!!!

[@mrredpill3121]

@Rick don't forget the welding dingle berries.

[@bagpuss121]

I Also Didnt See The Hub Nut Tightened Up With A Hammer And Drift/Chisel , Seriously They Can Make Those Axles But They Can Make A Socket Or Spanner To Tighten The Hub Nut, Thats Just Wrong .

[@HorsleyLandy88]

Rule number1, "everything we make we must chuck it in the dirt"

[@emilsustrean938]

The bearings are dry no grease!

[@recaspita1]

Es mejor!!!

[@MuzzleVelocity]

at least less dust sticks to the pieces when they drop them on the dirt floor.

[@RobotN001]

19:20 ролики смазаны. да и это низкоскоростной транспорт, это видно по сальникам.

[@khalidmahmood2373]

You see when fited last green cup? when thay fit in wheecle then thay fil grees in that cup ..

[@jalechavez6042]

Genial...!!...muy rápido...Saludosss amigos......!!!

[@timbow50]

Pound that hub in a pipe and don’t know if it’s straight with the other end? You need this perfect or the tires will wear prematurely. Gee! I don’t care apparently.

[@khreaksmey568]

Good luck

[@Wowmechanics1]

The Mechanical Symphony: A Visual Extravaganza" By Wow Mechanics

[@maoripighunter]

one problem no grease on the bearings when installed it wont last long

[@ВасилийВикторович-щ7д]

Ступицу с земли поднял и сразу на цапфу напялил... зачем смывать песок?

[@fanacm5]

Так там и резьба ужасная

[@RobotN001]

Песок это фиксатор резьбы. Всё вам объяснять. 🧐

[@alegator]

А то что после сварки набили подшипники не почистив с кучей мусора не смущает))))

[@ВасилийВикторович-щ7д]

@@alegator да там перечислять замучвешься, я думал все поймут, но оказывается есть те кому все надо перчислить...

[@dimfil1460]

Епанутся плюс минус пару мм. Как так можно делать? И они же хвастаются ставят видео на обзор что мол они такие супер умельцы. А за проделанную работу там надо руки ломать. Неандертальцы

[@mbury8004]

I wonder that the maschinist still has his left arm !

[@ГошаВартанов-м6з]

Да, итальянцы молодцы конечно

[@PopkowAlexey]

Точно, не то что эти французы из Австралии )

[@codprawn]

Nice fit on thst nut by the look of it. It would take me 10x longer and I have far more equipment and ppe 😂

[@Алексеймеханик-о2к]

Интересно, сколько токарей размотал этот станок?

[@Сыктым_Сыктымов]

Тойоты так же изготавливают.

[@Cyclone_IV]

Интересно, какие биения вала получаются? Там же дикая несоосность

[@АлександрБомба-д4и]

на тех дисках что они сами изготавливают из старых тоже несоосность. Подберут положение в котором они скомпенсируются

[@alfianpajow3870]

Very good

[@eddielane9569]

One thing is there is not nearly enough grease in the bearings. You need to pack the bearings with grease not just wipe it on them. Then you have the nut that is Rusty. You could at least took a grinder to clear off a lot of that rust and then used a wire wheel to finish it off. I am not sure of what the load will be on that axle but if it's on a tricycle it will probably be all right but I've noticed a lot of things in that side of the world as far as trucks they are way overloaded and that is the reason the places exist to keep fixing all of the broken axle shafts and other axle related parts and front end parts. You would not be able to get away with loading your vehicle down as much as happens in India, Afghanistan and other parts of the Middle East in the western world. Overloading your vehicle not only damages your vehicle but your roads.

[@X_Killer.]

Сделайте токарю автоматическую подачу

[@AbdulHafeez-cq6oo]

Good job

[@odiesclips7621]

Welcome to Dirt Floor Machine Shop. Please leave all safety equipment at home....

[@Unrivaledanime]

Has anyone noticed that overseas no one uses emery cloth to polish a shaft is it too expensive or do they not have it there ?

[@theohess3242]

How can you work in such a mess

[@patistern4331]

Why does he simply throw this piece of metal on the ground after drilling? I've seen that a lot now, they throw everything away when they're done, regardless of whether it's a tool or not a part they just made all on the floor, then they just spit everywhere like pigs no respect for nothing that's why everything is so dirty there would never go there really never

[@ahndeux]

If you like dirt and no grease in your bearings, the "Nissan Diesel" shafts is what you buy.

[@deaerlangga4851]

Kaliayan sangad anjay

[@dave-j-k]

"How much pre-load on these bearings guv? "..... "yeah, give it some..."

[@ДмитроЯ-я6б]

willingness to work and diligence - it's good! But cleanliness in the workshops would not hurt you!

[@theunexploredskill]

Unfortunately they can't afford it

[@horstmuller7512]

It's just a mirror of the quality of their work. It's all worthless junk.

[@A_Stereotypical_Heretic]

They're filthy people...at work and at home

[@jordanfalkowski6924]

Was that song lil flip "i shoulda listned

[@anakperantau9516]

The great Pakistanese..

[@HorsleyLandy88]

That poor chuck :)

[@butong-ongbut457]

Gia công kiểu này độ sai số rất cao

[@khalidmahmood2373]

Can you tel me error?

[@владимирбелянкин-у2р]

а сальники и пыльники на ступицах не нужны разве?

[@НашСемейников]

Я так понял что это на какую то шайтан - арбу , нет креплений для тормозного шита ибо трусов в Пакистане нет .

[@khalidmahmood2373]

Yes you ate right. This exel for small loader . Loader speed will be 50 to 70 km phr

[@ТатьянаКорикова-л7к]

Тормоза придумали трусишки.

[@IF_fonackerman]

👍👍👍!!!

[@kristal1624]

주어진 현실에서 최선을 다하는 모습이 보기 좋습니다. 안전에도 신경쓰세요. 어느 나라인가요? 👍👍

[@khalidmahmood2373]

Thay belong from pakistan. City name Gujranwala. Thay peopel are very inteligent

[@mauriziovespino7601]

👍👍💪💪

[@amosmarconcin563]

Sorte pra quem comprou essa peça 😊😊😊😊

[@patistern4331]

Is that a joke, this bad work should also be paid oh god. This country is so dirty everything on the floor everything is broken the people have no respect.

[@Tatal.b]

👍👍

[@Vik1192]

Автор данного видео ну хоть ты подскажи этим людям очки нужно одевать и шпиндель руками не останавливать

[@r-evgenii]

очки нужно НАдевать.

[@starswoodmetalcreations6539]

Wow machined parts just chuck em on ground spindles look like he'll after welding the inner bearings are supposed to come off with the hub and sledgehammer for everything and no grease on bearings or oil in hubs which ever it is unreal

[@TahirKhan]

سلام عليكم جناب کدھر ہے یہ خرادیہ مجھے تین ایکسل چاہیے مل سکتی ہے

[@josemendesdecarvalhocarval7295]

São muito bons e usam causas do Brasil 😅😊

[@gueddalazher8683]

واش من بلاد باكستان. او الهند

[@donaldb3628]

What? No grease on the bearings? And, he picked up the bearings off the dirt floor and installed them? You would think they could sweep the floors every now and then!

[@khalidmahmood2373]

For grees he fited the last green cup. That cup for grees. When thay will be fit in wheacel then thay fil that cup with grees ..

[@andrewsmith9455]

Manufacturers warranty --- 30 minutes or 30 miles, whichever comes first

[@elamriabdellah7715]

👍👍👍👍👍

[@sativaindica3392]

It's too bad not using micrometer

[@alicanyilmaz-gm2ug]

We LOVE MUSLIM BROTHERS.

[@AutoworldDubai]

Good

[@A_Stereotypical_Heretic]

For some reason the finished product doesn't look like the thumbnail...😂

[@waqarshaikh1947]

Location and number

[@pavolmakohus619]

SUPER Slovakia ,,,,,,,,,,,,🛠🛠🛠🛠

[@theunexploredskill]

This is Pakistan

[@lazaro2381]

Definitivamente NO ES "TORNERO" yo lo saco del taller MÁS RÁPIDO QUE VOLANDO...

[@Rigoknow]

👍

[@radabheit8501]

A new axis is built out of nothing, very impressive. What I like most is that all the safety regulations are being followed.

[@ЮрийСаранцев-ж2я]

А тормоза где

[@MegaJrenato]

the lathe operator did an excellent job machined the shaft made the thread there the welder welded the shaft on the tube there at the end the citizen who says he is a mechanic puts the sledgehammer in the bearings because he didn't use sandpaper to remove weld slag on the shaft puts the cube on the earth floor assemble the bearings with the cube full of earth without grease and place the dirty cover without gasket or glue poor quality service

[@Fitness_557]

Hollow axle😶

[@swedesspeedshop2518]

Not how you install seals and bearings .

[@DavidReed-re8fu]

Van norman

[@AyushGupta-yx3cd]

Hello sir

[@jmjm1920]

I'm a machinist cnc and no safety goggles 😊

[@MrShobar]

Goes right along with the steel toe sandals.

[@desireedel0ssant0smat03]

DESIREE DE LOS SANTOS MATO

[@zloi-5161]

О т.б. даже не слышали.

[@rct2]

Who cares about weld spatter?

[@shefaulhoque318]

No safety At all.

[@ЭлнураТулебекова-р5й]

Унас такара дрочит тока умейить!!!

[@fasullodavvero]

👎👎👎👎👎👎👎👎👎👎

[@PILOTabcdce]

SAF or BPW ????

[@seimela]

😂 Indian

[@A_Stereotypical_Heretic]

Pakistan

[@ТатьянаКорикова-л7к]

KOSMIC TEKHNOLOGY.

[@kali-biniha-perkuyan.]

👍👍👍👍💪💪

[@desireedel0ssant0smat03]

DESIREE DE LOS SANTOS MATO

[@desireedel0ssant0smat03]

DESIREE DE LOS SANTOS MATO