The Roller Drum of Road roller became crooked || How it repaired with a locally developed tool? ||

[@polvincompoundsadmin5402]

GOOD IDEA! MAKE THE ROLLER THINNER, SO IT DENTS AGAIN EASIER, makes more work for them

[@diestrunzenstrunz4103]

Question #1 : how do you get this dented ? ? ?

[@chrisgoldie5577]

That's the taillight warranty. It's warrantied until we can't see your taillights any more.

[@Dylan.2003]

You can make it thinner between the tolerances

[@kk38444]

I’m sure it was already clapped out when they got it. One man’s trash is another man’s treasure.

[@MCMLXXXIV1984]

​@@kk38444 well said mare

[@SCP-POOL]

I swear if I was rich & was looking to start a repair / refurbishment shop, these guys would be my 1st stop. I would work out a deal to either move them or setup shop there, but they honestly deserve to be respected & well paid. They do absolutely amazing work with basic tools & it's incredible to watch! Much respect friends from America!

[@ВладимирГригорьев-ш8э]

Современные методы работы и инструмент, сделают этих ребят безработными 9 из 10

[@MrGaiden100]

Wish Indians where known for this kind of work in stead of scam calls...

[@wumao6797]

Yup, those are real skilled workers but I would make sure they wear work clothing and safety boots instead of loosely fitted Pjs and flip flops.

[@al68fc11]

I bet they love their shop and they get it done, they have the right tools to get any project done with quality.

[@mr.lastchance]

@@MrGaiden100 these are pakistanis

[@sparkes2592]

this is a good way to keep a constant supply of work. make it look shinny while also making the metal thinner so its more likely to bend again

[@mokhtarmoh1267]

ثمن قطع جديد يساوي 10 اعادة تدوير

[@Barmaley80x]

Если потребуется, легко можно наварить новый слой

[@enotenot971]

@@Barmaley80x Сразу видно нашего человека, никто так чутко не поймет восточных соседей как мы 😁

[@nicholasrhodes4550]

Next time they'll build it back up with welding, then turn it back down. Still cheaper and easier than getting new parts from America.

[@joreosuna650]

Using it's own power as a lathe was impressive, hats off to the team

[@Amazingskills838]

Thanks for appreciating

[@alanbell2156]

I bet the customer was thinking, hey, that had a full tank of diesel when I brought it in!

[@dav1dbone]

Complete disassembly of vehicle to drain the remaining fuel sitting on the bottom of tank, carburettor the fuel pipe and return pipe, although I would not be surprised if that was missing since the original mechanics probably deemed it unnecessary, that's probably on the top of Hilton hotel, been converted into "roof mount long john spinners"

[@Dailymailnewz]

@@Amazingskills838 I suppose using clubs and some hand protection is a sin in some countries while working.

[@SergiusTih]

Мужики молодцы! Очень трудолюбивые люди. Успехов им в работе и жизни.

[@salamzindagiG]

oh bhi bara he mushkil kam hi apka lakin bari bat bht acha kam mehnat sy ap sub loggg work krrr rhy hain ....buht he achaaa good jobbb ....keep it up .....😊

[@user-mn9ms6oi1v]

Я всегда удивлялся пакистанскому наплевательству к технике безопасности) Пилит болгаркой без защиты, перчаток и очков, да надень ты хотя бы пятилитровку пластиковую обрезанную на глаза, у них там что, по 10 окулистов на каждого работника?:D

[@Oleg_Mercedesovich]

У них в соседнем сарае разборка хирурга😂😂😂

[@dmitriydimets5590]

В перчатках жарко а в очках душно .

[@andrejshamin1452]

Аллах бережёт🙏

[@Jumpertj]

@@andrejshamin1452 на Востоке есть поговорка:"На Аллаха надейся, а осла привязывай!"

[@altair1nur107]

У них там еще 10 работников на подходе, дожидаются пока текущий откинется

[@bobnoblesjr.465]

Can we all just take a moment to appreciate the fact that they're doing all this heavy work.. in sandals and using a pike, boards, and manpower to make this repair. Impressive!

[@Delta3068]

If you appreciate it you too will end up like them.

[@ゲリン]

@@Delta3068 wdym

[@trujillo71921]

​@ゲリン🍉 meaning if you appreciate the hardwork and determination from these guys, apply it to your life and you too will accomplish many things sharing the hardworking and determination traits.

[@Delta3068]

@@ゲリン meaning don't appreciate people who ignore safety and don't use adequate tools.

[@robasbobi590]

😂😂😂

[@HentaizerZ]

3:39 Не правильно катки кантуете и поворачиваете вручную. Положите невысокие доски по траектории пути (главное по траектории поворота) и заезжайте на неё серединой катка. Его будет легко поворачивать.

[@MrDevWar]

Это же индусы)) усираются, но делают)

[@kosmos006]

@@MrDevWar это не индусы

[@panstakanski6116]

Не,не.... всё они правильно делают, круглое кантуют, квадратное катают.🤣

[@umangchaurasia4539]

​@@panstakanski6116these peoples are pakistani

[@Oleg_Mercedesovich]

Не учи ученого! А то наденут шлепки и деревянным молотком ровнять каток будешь!

[@robothat]

no gloves, no boots, no glasses, no power tools, no problem.

[@rogeriopereira2360]

Qual é o problema?

[@alanwann9318]

No eyesight, crushed toes, no employed

[@skitzochik]

no kidding

[@واحدبغداد-ع1ط]

الله لحامي😅

[@ketan738]

Bro..this is pakistan....hahahaha

[@Ricopolico]

This reminds me of my dead pal, Tommy Lee who was a field machinist at a steel mill. Once he was telling how he had field bored a 13 foot diameter cylinder. When I corrected him by saying, "You mean 13 inch.", he looked at me as if I were an idiot. "I know how big it was, I bored the damn thing." Talk about new-found respect!

[@jaydeepjain7489]

Mus lim kam asa karte hain ki bar bar problem hoti rhe

[@Bormglt]

Мне только не понятно как можно уделать катки, что они потеряли геометрию? Берет сомнение что каток после такого восстановления проработает долго.

[@РамильИсламгазиев]

Можно был удар об бордюр или об укладчик или с дороги съехал. Или во время перевозки упал с Тралла. Все это бывает

[@TheElSonador]

Ну так на видео они их и портят всеми доступными способами. Потом забьются грязью и станут ровными.

[@Wayoutthere]

@1:09 what's a westerner doing there??

[@adnanshuja4075]

Wonderful Skill and excellent brilliancy to perform such a heavy job so lightly Great People, Great Work. Thanks for Video.

[@Amazingskills838]

Thanks for appreciating

[@MGT559]

kzbin.info/www/bejne/iWKXnJ6qpbeLmtU

[@JejakaX]

Everything is by ALLAH's permission, Nothing can harm them, except with ALLAH's permission. ☝🏼

[@raphaelszok8561]

How much an hour are they paid?

[@Алексей-д9я9е]

2:37 чуть на ногу бедолаге не кинули железяку. А сколько случаев где кинули у них с такой работой.

[@abeonthehill166]

Wow……those Mechanics are the best ! Thanks for sharing……

[@robertlitman2661]

Of all the dangerous techniques I just saw, the worst one, and one nobody mentioned, was their use of a swarf hook. Their clothing was WAY too close. It’s so easy to get pulled in by a shaving and get an arm or torso sliced right off.

[@ChrisC-qh4io]

100% lack of foot protection. Not trying to be rude but these guys are doomed if they injure there foot and become disabled.

[@voanirges]

watch and learn :D, this video is proof why men live shorter then women :D

[@dann5480]

Safety gear makes you complacent. It's more thrilling and manly to not wear any.

[@johnnymnemonic69]

Many more men willing to take that risk. Making ends meet for your family to survive is a real bitch

[@pwho405]

@@johnnymnemonic69 if they don’t some other knucklehead will make that money.

[@gar_age29]

Пока они делали каток, у них слева аж грейдер созревать стал, был зеленый, стал желтый

[@KorabeL777]

🤣👍

[@Серега100к-я1й]

😂😂😂

[@impaler3228]

Техника безопасности у них на уровне )

[@НиколайСилин-э9ч]

О таких мастерах мечтают в любой авто мастерской , минимум оборудования, максимальный результат!

[@72Igorek]

Я только одного не понял, этот каток( кстати фирменный) участвовал в токийском дрифте?

[@dzikar]

@@72Igorek не, судя по всему ему заменили этот металлический бандаж и не сильно ровным металлом.

[@ДжастинТимберлейк-ф2р]

скоро в расии будет так же

[@mineevsergey5073]

​@@ДжастинТимберлейк-ф2р Обоснуй...

[@АлександрСафронов-э1к]

Зачем они катки местами меняли?

[@hauloffjunkremoval8304]

Invest in some impact wrenches

[@dDoOyYoOuUtTuUbBeE]

I wonder what are the variations of thickness on the cylinder itself after they make the exterior more or less round. Compared to the manufacturer specifications.

[@WillOneZeroZeroTwoFour]

Exactly, I was thinking the same, the less thick it becomes the more it is prone to be bent again.

[@MarioAPN]

At some point the cylinders have to be replaced.

[@ابومحمد-ل6خ1ذ]

ما شاء الله تبارك الله.. أتقن وأفضل عمل الباكستانيين ❤

[@saandykumar4180]

Available Pakistani is such a hard and skilled worker .. I wish them good luck ❤ from hindustan

[@gingerturtle4229]

How can you not be impressed by the skill and hard work that goes into this repair. We live in a throw away world here in the west, the ingenuity on display here to recycle and repair should be a lesson to us all. Great video.

[@ReadTheShrill]

It is impressive. But I guarantee they don't just throw away those drums in the west. They cost tens of thousands of USD, at least. They repair them much the same way: they weld more material into the low spots, then machine them round again on a large lathe. It's virtually the same thing, only it's a purpose-built piece of equipment.

[@ReadTheShrill]

​@Jester J You actually believe people in the west just throw away a $100,000 drum when they could repair it for $5,000. Talk about dense. 🤦‍♂

[@TheFoxEssence]

Agreed ❤

[@thefreedomguyuk]

We do repair such parts here. But we do it in a way which does not jeopardise the lives of workers.

[@iman1687]

Понимаю что населения почти 2 млрд но хоть рукавицы и тальку им купите.Лом и все голыми руками.

[@mistermuhutya2583]

Теперь он еще быстрее будет деформироваться, так как стал тонким

[@ГраниСтиля-р8с]

Капризный заказчик 😂 там с запасом на расточку)))

[@mitka007]

Теперь по буеракам на обед гонять не будет ;) полько на чистовую выкатку.

[@mineevsergey5073]

​@@mitka007 честно говоря,я думал что эти колеса у катка вечные...Они же железные- чему там ломаться?...

[@mitka007]

@@mineevsergey5073 метал пластичный, об камни мнётся и деформируется.

[@__Goodwin__]

​@@mitka007не ну я понимаю чуть деформируется, ну они сняли например даже мм, у них от этого дороги ровнее будут? В чем смысл действия?

[@relaxingnature2617]

Are the long shirts they have called "Kurta" ?

[@dikgoldwing]

Жесткость импровизированного суппорта из довольно тонкого кругляка для такой длины очевидна даже работникам, поэтому они постоянно прутком его поджимают, чтобы не слишком выгибался и резец от детали не отходил.

[@вчемсилабрат-ш7ц]

И так сойдёт)

[@alexwoods2836]

​@@вчемсилабрат-ш7ц УШМ бы почистили и вернули заказчику . Разница не большая, блестит одинаково.

[@nRADRUS]

противоречие: резец от детали не отойдёт если деталь на резец не давит. резец перетачивали несколько раз для остроты, резонансов не было, точности тут хватило.

[@brunospfc8511]

Num vi um arco-íris trabalhando aí, será porque não é?

[@bernardchretien1826]

Ingénieux 🧠 !!! Et efficace.. Un bon sablage, une bonne couche d'appret antirouille Une belle peinture jaune et rouge... Et ce Dynapac est prêt pour une nouvelle utilisation 🎉 Bravo 👏

[@calvinbass1839]

What did they just do? Rotate the tires?

[@БахтиерРахмонкулов-ь1ь]

Каждый день делай так, и спина не будет болеть.... 😁

[@Iljjlfilj]

Заказчику скажут- точили на станке.гони бакшыш+ токарные работы и транспортировку туды сюды😏

[@adidas8944]

Техника безопастности на высоте! Режит резаком, прищуривается )))

[@vadimpotapov734]

Углошлефовальной машиной зачищает пофиг на защиту глаз

[@Dashlygin]

В щлепках ещё работают

[@Roma_ded_starik]

Сидя на корточках на стуле.🤣

[@-JonnyBoy-]

Drum gets dented, bring in to shave drum down to repair. Drum now easier to dent, gets dented comes in for repair and get shaved down. Drum now even thinner gets dented and comes in for... You see where i'm going with this lol

[@nismo2070]

Amazing craftsmanship and skill on display here. As an auto tech in the US, it completely impresses me how they repair almost EVERYTHING there. We have gone the other way. It used to be cost efficient to rebuild an alternator. Hardly anyone does that here anymore. I have rebuilt my own and a few for customers but finding the parts has become difficult. Parts stores used to stock rebuild/reseal kits for power steering pumps and gearboxes. No more. We used to be able to get brake caliper rebuild kits. No more.

[@ArthurDentZaphodBeeb]

There's repairing back to factory spec, and then there's 'pakky spec' - two vastly different things.

[@rodneylamb1245]

Diesel Mechanic here, I complain I have take 1/4 bolts without my impact. Good job though. I respect every country is different. Cheers

[@офелиячамз]

я конечно в шоке от этиих ребят)))все могут делать,молодцы

[@marcoluna1316]

Glad to see everyone wearing safety sandals

[@JROOGZ]

Off coarse safety is number 1000 priority

[@Чивероги]

Парни, вы просто молодцы! Настоящие мастера! Большое уважение вам!

[@АлексеенкоКонстантин]

Вот так в Египте строили пирамиды

[@АлексАлекс-т1у5ъ]

Техника безопасности на вышшем уровне😂

[@MechanicalMikesRoadsideRepair]

It’s not broken and ready to head to a recycler unless some mechanics in a foreign country using hand tools can’t fix it 😂❤️🐐💯

[@ThePastaManCan]

New bearings...

[@hilham89]

This video shows just how easy some people have it and yet they still complain. Nice work and the most respect to y'all.

[@toothpaste22]

Stop complaining

[@hilham89]

@@toothpaste22 far from complaining 🤣

[@harrygsd7561]

Very very hard worker Pakistani great job great work

[@Виктор-и3и7ю]

Похоже их работодатель решил что раз у них огромное количество населения то можно не заморачиваться даже с минимальной техникой безопасности, "Одним больше, одним меньше - кто их считать будет?"

[@MopaHa13]

капитализм.

[@DANRUS.]

Работа ради работы 😂 Как бы они сняли нормальный слой металла, сделав его тоньше, и не наварив сверху новых листов металла! Идея с использованием привода самого катка, для проточки верна, но работа не доделана, сверху надо надеть трубу либо листами наваривать.

[@korban_dallas_multipassport]

Люди в сланцах не победимы......

[@garrykon2323]

Один там в туфлях рассекает. Видимо мастер. 😊

[@ianwille5780]

What is captain America doing here working on heavy equipment??

[@davidmitchell7183]

He is a good welder, doesn't try to cover in one wide pass like untrained welders.

[@КонстантинАстафьев-г8в]

Токарный станок видел знаю, но токарный каток😂😂😂😂😂 впервые😂😂😂 Ну индусы, етить колотить 😂😂😂😂

[@Bilal-ni1uf]

یہ پاکستانی ھیں انڈین نہیں انڈین پنٹ شرٹ پہنتے ھیں یہ الحمد اللہ پاکستان کے کاریگر لوگ ہیں

[@tonytony3337]

These people are Pakistans

[@bmwturbo70000]

That weldig is one of the worst thing. Not a propper V joint.

[@mer-i8u]

هذا الشعب يشبه الصينيين في التفاني في العمل تحياتي من الجزائر ❤❤❤

[@machineb69]

I admire you guys, you don't have modern tools but you still get the job done well, it's truly extraordinary

[@agostinomainetti1568]

Complimenti ragazzi per tutti i lavori che fate senza le comodita di attrezzatura facci il meccanico di escavatori so cosa vuol dire fatica ,e la vostra e doppia ,e riparare ci vuole capacita a sostituire sono capaci tutti ,un abbraccio dallitalia 👋💪👍🇲🇽

[@sunnybass5018]

Sandles ha, show the 10 guys with squished feet!

[@thespectator2976]

Very impressed, i have personally been working with theese machines. Always replaced old gear, but theese guys, damn, they are creative :)

[@ChiefBrianIrons]

Too expensive to buy new so it's way cheaper to repair it if possible. Its same with electronics over in subcontinent they repair it, unlike in western world we just throw it away and buy new. These people won't let anything go to waste.

[@thespectator2976]

@@ChiefBrianIrons i like the way they go, we should do the same tbh. but then again, safety always first ofc :)

[@ganeshrvgk]

You need to live in India or Pakistan to know all of these things. We just will not throw away anything until every goes away. Not like Western countries.

[@mick9088]

Well done. But now it's thinner, and easier to dent, next time.

[@kevinbrewer7043]

I would love this work.... with steel toe boots and huge rotary hammers...basically the same right? This is an honest days work. Everyone has all the toes and fingers. Hats off to them.

[@ПавелКаназаков-ю7с]

Браво! Молодцы парни 🤝👍✌

[@michaelroberts1120]

So much time and effort making sure the drum dimensions are true and accurate. If the roller were operated with the drum out of alignment, it will work yes, but the roads it paves will look as if they're in Trinidad and Tobago, all bumpy and uneven. Which is okay for Trinidad and Tobago, but apparently even Pakistan, a fellow third world country has higher standards.

[@Alanjoseph2004]

Meaning of the word MAN POWER is perfectly defined in this video

[@screwsnutsandbolts]

Impressive job 👍

[@metatechhd]

👏👏👏 This team is truly talented and dedicated to their craft! It's amazing to see them work with basic tools and come up with innovative solutions to fix complex problems. They deserve all the respect and fair pay for their hard work. If I had the resources, I would definitely support them in any way I can. Much respect from the United States!

[@al68fc11]

Basic tools🤔🤔, they have the right tools to get it done, and they did it🫡🫡💪💪👏👏👏

[@Threebarscross]

Afghanistan engineering. Very resourceful people! Miss it there!

[@patrickradcliffe3837]

If they would have had Oxy acetylene rig they could have really trued up the roller. Ingenious creating a fixture to machine the drum.

[@ThePastaManCan]

Yeah but it looked like a bearing blew so

[@martinvannostrand8488]

They did have an oxy acetylene rig, 14:20

[@marcosrinaldo3406]

Quantos dias para concluir esse trabalho?

[@Sanya231986]

Так вот как на катке сход-развал настраевается и балансировка😂

[@mohammadvaliheidari8958]

کاري جامې او د خوندیتوب بوټان ستاسو په هیواد کې مشهور ندي

[@infene000n]

интересно, зачем им каток, да ещё ровный, дорог же нет 😂

[@Mr.Skill-x]

Good, amazing hardwork. We appreciate skilled persons

[@incredibleprojects]

These men work for less that £1 a day - good on them to keep their households fed

[@night_warrior_svetovoy_god]

все равно кривая фигня получилась.но с болгаркой в конце зачет)

[@JFML1974]

It impresses me as a Spaniard to see how they are able to devise and work as a team in such a precarious but effective way

[@martinvannostrand8488]

What does being Spanish have to do with it though

[@register1430]

How would the job have been done - if at all - in the west?

[@IsleOfFeldspar]

Use the machine as a lathe, awesome

[@mixxvideos0092]

❤

[@FutureEon]

🚧⚠🔧It's crucial to prioritize safety when using any machinery or tools, and the video highlights an important concern regarding the use of a swarf hook. The proximity of their clothing to the hook poses a significant risk of injury, and it's essential for individuals to be aware of the potential dangers and take necessary precautions. This video showcasing the repair of a crooked roller drum using a locally developed tool is both intriguing and raises awareness about safety practices. 🚧⚠🔧

[@DanySdowo]

You are talking about safety when in their state a goat has probably more rights than a yung girl

[@perfectiom3718]

Okay lets talk about your privilege and mass shooting at school

[@MrThisIsMeToo]

I stopped reading your comment after the silly emojis.

[@hbhfdvhj1753]

عمل جيد اخوتي بارك الله جهودكم

[@FurryEskimo]

Someone who has context, can you tell if they’re working harder, smarter, or both? Seems like a lot of manual labor to fix this, but at the same time that’s not always a bad thing and they might be working very efficiently.

[@martinvannostrand8488]

I don’t have context, but I can tell that they’re definitely working harder, because most companies in the west would just buy a new roller and scrap the old one. And with the amount of dangerous techniques and the total disregard for safety, they’re definitely not doing it smarter. Good on them for fixing this, but really this video shows how to get a difficult job done when you don’t have access to the best tools

[@georgegonzalez2476]

It’s not efficient. Human labor is always like five times more expensive than getting the equivalent amount of power from electric or fuel fossil fuel machines. It only looks efficient.

[@horstmuller7512]

Remember Pakistan is one of the poorest coutries worldwide but on the other hand home of these "super high skilled professionals" we can see in all Pakistani videos. There must be a correlation, but i don't know what it could be.

[@watermenplumbingfiltration144]

What is the bit made used on the lathe. What type of metal?

[@ArthurDentZaphodBeeb]

Love to see a straight edge on that roller after they were done - that thin bar was obviously bending. Probably has a nice crown😂😂😂 Just how did they dent the roller so badly? Drive it off a cliff? Ram it into a wall? The owners of that roller probably used it for years in that condition - nobody could figure out why the pavement were so effed up😂

[@andrejshamin1452]

Потная катка катков. Такое ощущение, что бочки никогда не катали. Мужикам удачи по жизни и здоровья.

[@Paulwellbuilt]

Apart from the fact the drum is now thinner and more likely to distort the Engine now needs an overhaul with all that running.

[@mdhvdubey]

Exactly the comment i was looking for 😂

[@paulramsey8187]

And that weld should have been fillet cut with root and cap passes.

[@SouthJerseyBaitReviews]

the engine is fine u think a couple hours of a heavy machinery operating is gonna need a overhaul yea okay lmao.

[@gingerturtle4229]

The surface removed was minimal and wouldn’t affect the overall strength there over engineered during production anyway. You’d only get away with doing this a couple of times though until it did fail. As for the engine not sure why running it would require an overhaul?

[@ahyaan2552]

@@gingerturtle4229 just people hating the poor

[@jayo.t.z6476]

That thumps up at the end certified the quality of work. 👍

[@Zhukov-3]

You guys are good!😊

[@theflyingdutchman22]

13:12 Hasbulla is everywhere isnt he

[@MarkSvara]

Always impressed with the amount of hard work. One complaint, where is the hearing protection?

[@СергейЧистяков-з7ы]

Какого слуха? Главное глаза!

[@Lonewolf-kw8gg]

They love a bit of tinitus in this part of the world😂

[@JejakaX]

Everything is by ALLAH's permission, Nothing can harm them, except with ALLAH's permission. ☝🏼

[@martinvannostrand8488]

That’s it? Where is any protection? Did you miss that they’re doing this all in sandals, wearing loose clothing next to spinning machines that can suck it in, and welding without face masks?

[@cramkisson9709]

Ear protection? We dont need no stinking ear protection.

[@arturodelagarza9028]

THESE SUMBITCHES ARE FKIN OUTSTANDING. AMAZING. GOD BLESS YOU BROWN BROTHERS

[@garymuse9009]

I like the team work here

[@felipemello3793]

É assim msm já fiz mto isso quando os da frente está careca tem q passar para trás esse aí é mais fácil 😂😂😂

[@ravenna6543]

0% safety 0% technical knowledge 100% hard work, skill, and experience.

[@richhowe7193]

For the basic tools that they have you can’t criticise the repair. Seeing the machine in drive without anyone in the driver’s seat is unbelievable, this is fundamental safety

[@robinclaidlaw]

@@williamrose7184 Killing somebody that’s just doing their job through a foreseeable accident 1% of the time isn’t really acceptable though, which is why we have these rules.

[@savydude1]

Amazing skills but loose clothing around machinery looks dangerous.

[@ХикматллоЗакиров]

Молодцы Пакистаниць за все работа берутся.!

[@MrStarlin51]

Yep not a care in the world for safety glasses or anything else but look thru a welding sheld if it's the right shade and beating against at least 3/4 plate steel wow

[@davidtyndall8880]

I once had a Crescent adjustable wrench that actually had an arrow on the handle indicating in which direction force was to be applied to the handle.

[@jeffeldredge1608]

Let me just say. For about five hundred dollars they could all be using Air Tools. Just sayin’. I get, using hand tools. But not for that work. Come on owner. Buy each guy his own air impact wrench. He is responsible for bringing it to work every day. No tool no work. It would cut their production time down to quarter, with less chance of physical injury.

[@chaspruitt2610]

You guys certainly get things done!! (OSHA would have a heart attack, but so what.. screw OSHA. 🤣) GREAT WORK!!!