4 Things You Need to Know before Buying an MSD Ignition Box | 1995 Ford F150

  Рет қаралды 18,482

Minute Masters

Minute Masters

Күн бұрын

Пікірлер: 51
@williammitchell2302
@williammitchell2302 Жыл бұрын
I always appreciate your videos. You need a "merch store" I don't put decals on my 95 F-150, but I'd support your channel by displaying your decal (under the hood with the other decals.) Lol
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
Thanks man! I appreciate it.🤙 I do have a merch store. If you go to my channel page. There are tabs at the top under the banner picture. Click the one that says store. I have stickers and t-shirts.
@Skitter302
@Skitter302 Жыл бұрын
#3 It fires Multiple times per cylinder under 3000rpm. Each cylinder is now getting 3 sparks at a higher voltage. Above 3000rpm is getting 1 good hot spark for a hotter quicker burn of the fuel in the cylinder.
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
Ah! That’s why I hear both types of firing.
@borderlineiq
@borderlineiq Жыл бұрын
Always a pleasure, friend. Thanks for sharing.
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
Thanks Jason!🤙
@jeffl1356
@jeffl1356 Жыл бұрын
So is it a noticeable difference? Details?
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
I will have a separate video on that. Based on my driving, I would 100% say there is a noticeable difference.
@albertobadillo4367
@albertobadillo4367 Жыл бұрын
Nice I’ve been wanting to add a box on my 92 with a 347 stroker but don’t know if it’ll be as easy as yours since I have a mega squirt as my ecu
@OBSfordguy
@OBSfordguy 9 ай бұрын
You should do a quick4 transmission tuner tutorial, and installation video
@TheMinuteMasters
@TheMinuteMasters 9 ай бұрын
I’ve never heard of quick4. Do they make them for 4r70w?
@OBSfordguy
@OBSfordguy 9 ай бұрын
I believe so yes
@iamgriff
@iamgriff Жыл бұрын
I know I will be at the Detroit International Auto Show this weekend.
@calebsmith5963
@calebsmith5963 Жыл бұрын
Hi Minute Masters, long time fan, you've helped me restore my 94 Bronco! I was wondering if you could make a video on how to flush an e4od transmission? There is so much conflicting information online about the "proper" way to do it and I've never done a transmission flush before, definitely feeling anxiety about attempting it myself.
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
Hi Caleb, so flushing a transmission via a machine does have the potential of causing internal damage which is why flushing is frowned upon. However, introducing new fluid while evacuating the old is pretty straightforward. I have a couple of videos that show different aspects of this. My recent, how to remove a transmission video shows you how to empty the transmission fluid. That’s the same process I would use to do a “flush” and then all you have to do is pour new fluid down the dip stick tube. It’s also a good idea to drop the transmission pan and change the filter. That’s the other part of making sure you introduce new fluid.
@calebsmith5963
@calebsmith5963 Жыл бұрын
Thank you! Looking forward to more great videos!
@NeonFlaming0
@NeonFlaming0 11 ай бұрын
​@calebsmith5963 I just want to add to his point that flushing a transmission applies a pressure to remove all that stuff. A certain pressure that the tranny is not designed to handle. Usually a flush causes more problems than its worth. Doing a regular drain and filter change is the way to go.
@twinoreos3221
@twinoreos3221 Ай бұрын
So why do you need to plug it into the stock harness wont that allow the stock icm to mess with the msd setup. And also do you know where to plug the tach and pickup wire to if you do use them
@TheMinuteMasters
@TheMinuteMasters Ай бұрын
I don’t think the stock ICM should mess with it. Otherwise that would be pretty counter intuitive to supply the adapter harness. The directions give you an idea as to where the tach and pickup wire go. Otherwise, I didn’t look for myself.
@kybbq7904
@kybbq7904 5 ай бұрын
Did you lift the cover to expose the dials and set the limiters? If so what settings? Keep up the great work! Tia
@TheMinuteMasters
@TheMinuteMasters 5 ай бұрын
I didn’t mess with any of the settings. At least I don’t think I need to on a stock truck.
@scottcroney1703
@scottcroney1703 8 ай бұрын
I have a 99 dodge ram 1500, i got one of these boxes off of another 90s model page truck and was curious how it could be installed in mine? And how could i test the box before use?
@TheMinuteMasters
@TheMinuteMasters 8 ай бұрын
It probably installs similarly but you would need the adapter harness for your truck or you would hardwire it.
@fuelbasti
@fuelbasti Жыл бұрын
What do you mean by setting your timing again? I will install the 6A Ultra onto my carbed 350 and it is needs 10-12 degrees. Is it deifferent with the box?
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
So my truck is set to 10° before top dead center from the factory. I kind of error closer to 11 or 12° top dead center when I installed this box and I rechecked the timing. The timing was around 5 to 7° top dead center essentially when I was driving the truck, it seemed like it didn’t have enough power so I adjust the timing back to that 11 to 12° top dead center and everything ran perfectly.
@jerrettbrown
@jerrettbrown Жыл бұрын
Does it run better with the system
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
In my opinion, without any scientific data, I think it does.
@mustang2433
@mustang2433 Жыл бұрын
Are you going to do a MSD distributor next
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
I may not, at least for now. I am thinking of upgrading the ignition coil and plug wires.
@jeremysweeney2662
@jeremysweeney2662 7 ай бұрын
Does this work with bullnoses?
@TheMinuteMasters
@TheMinuteMasters 7 ай бұрын
I don’t see why not. The kit itself isn’t very vehicle specific. You can buy accessories that help adapt it to a specific vehicle though.
@calfrank1630
@calfrank1630 Жыл бұрын
Hey love video. I’ve been looking at getting one of these for my ‘96 bronco, but I’ve heard some bad stories about how these have become a lot less reliable. Will you be giving an update on performance gains you noticed and if any issues that arise?
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
You bet I will! I had the same concerns and so far, it’s been very reliable and the performance is noticeable.
@jesse75
@jesse75 Жыл бұрын
Some people are having success. And some are not. It's a hit or miss. The success rate is not high enough for me. I've got $2,000 worth of MSD junk sitting my shelf. Anybody want it ?
@jesse75
@jesse75 Жыл бұрын
Some people are having success. And some are not. It's a hit or miss. The success rate is not high enough for me. I've got $2,000 worth of MSD junk sitting my shelf. Anybody want it ?
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
@@jesse75 So far so good for me.
@jesse75
@jesse75 Жыл бұрын
@@TheMinuteMasters lucky guy ? Explain exactly how you wired the box in and where. MSD , Holley tech, always blames the installation.
@G93KMA
@G93KMA Жыл бұрын
Can you do a video of how to do #4
@TheMinuteMasters
@TheMinuteMasters Жыл бұрын
During the install video I show you how to adjust the timing. I also have a dedicated timing video as well.🤙
@MrJeep75
@MrJeep75 11 ай бұрын
Does this buy pass the stock ignition box
@TheMinuteMasters
@TheMinuteMasters 11 ай бұрын
It connects to the existing system. In the event the box fails, you can bypass the box.
@dresoto3188
@dresoto3188 4 ай бұрын
Dummy proof explanation😅 thanks brother
@TheMinuteMasters
@TheMinuteMasters 4 ай бұрын
You’re welcome!🤙
@estebangomez805
@estebangomez805 Жыл бұрын
Awesome
@einstein3509
@einstein3509 8 ай бұрын
Have you done a video on how that MSD box install has improved your engine performance?
@TheMinuteMasters
@TheMinuteMasters 8 ай бұрын
I haven’t yet. Once I get the 4 x 4 suspension on the front. I’ll be able to drive it again and film that video.
@princeali2555
@princeali2555 Жыл бұрын
😍
@MrJeep75
@MrJeep75 11 ай бұрын
Msd is bace off the ford ignition system
How to Correctly Install and Troubleshoot your MSD Digital 6AL Ignition Box
10:13
MSD Performance Ignition
Рет қаралды 376 М.
How to Install the MSD 6AL Digital Ignition Box | 1995 Ford F150
10:23
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН
It works #beatbox #tiktok
00:34
BeatboxJCOP
Рет қаралды 41 МЛН
Леон киллер и Оля Полякова 😹
00:42
Канал Смеха
Рет қаралды 4,7 МЛН
Should I Use an MSD
21:39
Autorestomod Manic Mechanic Gasoline Media
Рет қаралды 59 М.
MSD Ignition Controls - Playing with Fire
6:07
Advance Auto Parts
Рет қаралды 190 М.
MSD Ready to Run Distributor
5:32
Power + Performance
Рет қаралды 85 М.
How to Make a Cold Air Intake from OEM Ford Parts | 1995 Ford F150
4:27
how to wire GM HEI distributor to MSD ignition box how to DIY
7:53
Craft Customs
Рет қаралды 126 М.
MSD ignition coil test repair
5:11
Fintech Repair Shop
Рет қаралды 116 М.
It’s all not real
00:15
V.A. show / Магика
Рет қаралды 20 МЛН