HONDA CBR600RR (2003-) LED: ELECTRONIC TURN SIGNAL RELAY. HOW TO INSTALL IT [The Right Way] 👨‍🔧

[@bradleyjacobs7870]

Thanks for all your help the way you show things makes it easy to understand how to fix something and make the correct changes without screwing everything up.

[@VictorRodriguez-bs9sx]

Hey buddy I just fix my bike I did the was the same thing yellow box same wire I giving ground and problem solved, thanks your video was really helpful!

[@TheOldMechanic]

Glad it helped

[@Folsy36]

You Sir are an effing genius. This is the 2nd time your common sense logic has saved me money and time. Thank you very much for making these videos, which are both funny and educational.

[@TheOldMechanic]

Great to hear!👊🏻👍🏻

[@gintsbritiks2659]

Love your videos it has helped me a lot

[@robbroy]

You're amazing - completely fixed my non-functioning indicators 😍😍😍

[@TheOldMechanic]

Thanks !

[@curtischillin4560]

Can't like this enough, thank you. By the way, if you have a 3 pin flasher like mine, there will be an extra "E" terminal. Just connect that to any ground. Straight to the battery is fine. I tapped into one of the grounds on the fuel pump relay

[@TheOldMechanic]

Good info Curt 👍🏻👊🏻

[@mykl--]

Beautiful bike. Love your vids, Debating on getting the dark or the light smoke windscreen you have. Dark looks so good on Red!

[@mendingmotos]

lol I like all your sound effects haha

[@wtbnewname]

Thank you for this video very helpful

[@TheOldMechanic]

You are welcome! Greetz from The Old Mechanic

[@randyburgos]

Thank you for your help on this one Sir. Randy

[@mariuszzabocki1408]

If I want to change indicators in honda pc37 to LED then is IT enought to put in Led flasher 21Wx2+3,4W? does this work with hazard lights? when will all the turn signals come on?

[@TheOldMechanic]

Yep as the electronic flasher relay doesn't mind the load (watts) 😉

[@shadytarek5244]

Nice job 🤺👍❤️

[@TheOldMechanic]

Thanks !!

[@Rat_Max33]

Hey i did this but my turn signals wont work. They stay on, but when i use the turn signal they dont flash.

[@matttrimble9222]

Hey did you find a way to have the signals off?

[@Rat_Max33]

​@@matttrimble9222 No man 😞 i haven't attempted to take apart my bike again.

[@matttrimble9222]

@Rat_Max33 I'm going to splice into the front signal wire take it to the rear signals and hope they work together lol

[@VictorRodriguez-bs9sx]

Hellow sir, I have a cbr 600rr 2006 my fuel pump don’t prime when I turn the key and I also found that the turn signal light on front the green wires have power and the red one don’t maybe you can help me here, maybe that’s why mi bike don’t start light on the tachometer turn on, fuel pump I tested and they work this problem is driving me crazy! Hope you can help thanks

[@rabirabi6331]

I need help, I just bought a universal digital speedometer and I have a cable that connects to the bike wires Is there a book or a way to explain the function of the introduction wires?

[@exlighter8123]

Hi ...nice video thankyou... would you know if the colours are the same for 04 cbr1000rr? Thanks mate 😊

[@TheOldMechanic]

I don't know, perhaps other viewers know the answer 😉👍🏻👊🏻

[@Folsy36]

On the wiring diagram find the instrument cluster. Then find win in and win out....those are the 2 wires you need. That will show you the colours to bypass at the blue plug. Hope that helps.

[@kungfukenny4439]

Good day sir, do you perhaps know how to install 100W resistors for a integrated tail also on a cbr600rr? black/red wire. 2 of them.

[@randyburgos]

Hey Old Mechanic. Hope you are well. I have watched this video a few times. Now, I have an old bike a 2001 Kawasaki 1500 Classic E-4. I do have the book on the electrical wires and all. My question is are those relays only for the the newer bikes? I would love to have LED turn signals. I tried putting them in but they flash way too fast. Thank you for the videos again Sir. Randy

[@TheOldMechanic]

Hi Randy I will look it up for you 😉

[@TheOldMechanic]

Hi Randy, does your Kawasaki has this Automatic Turn Signal Canceling System ?

[@randyburgos]

@@TheOldMechanic No it does not. She is an old gal. Lol. 2001 Kawasaki 1500 Classic.

[@randyburgos]

@@TheOldMechanic I can’t thank you enough Sir. Randy

[@TheOldMechanic]

@@randyburgos Hi Randy, first thing you have to do is find your flasher relay on your bike. IF it has 2 wires (one is orange) then you change it with a 2 PIN LED flasher relay. like this one: nl.aliexpress.com/item/1005002087342318.html?spm=a2g0o.productlist.0.0.7fb27081yacuGe&algo_pvid=42e4933f-5e99-440e-9bd9-1e1493709ced&algo_exp_id=42e4933f-5e99-440e-9bd9-1e1493709ced-13&pdp_ext_f=%7B%22sku_id%22%3A%2212000018699364876%22%7D&pdp_pi=-1%3B1.4%3B-1%3B1.18%40salePrice%3BEUR%3Bsearch-mainSearch Hopefully this helps

[@chenyhernandez7923]

Hi ..I have a 2004 cbr 600rr right back blinker problem...please help

[@sophykim1758]

Is it the same with cbr600rr 2007 ? I have the same issues I try to find out how to connect the new flash relay

[@TheOldMechanic]

Hello Sophy, I am not sure. Just put one of you blinkers on, right or left and simply listen if you can hear a clicking sound, and where it comes from. Then if you located that, just simply feel with your finger if you got the right relay. It could be underneat your buddyseat for your model, but i am not sure. Perhaps someone on my channel knows it ? Greets from The Old Mechanic.

[@sophykim1758]

I know where the relay is. It's underneath the seat but how can I slow the hyper blinks ? Do I need to change the new relay ?

[@TheOldMechanic]

@@sophykim1758 Its the way the 'old' relay works. It blinks at a rate according to the load of the bulbs: 4 x 21wats + 2 from your indicator bulb. Thats 86 watts and according to this formula I = P / U Thats 7.16 Amp. (I= Amp P = Watt and U = Volt.) So its 86 Watt devided by 12 Volt. Now when you install LED blinkers those are in the Milli Amp range your old blinker relay 'freaks' out lolll. You can do 2 things, put a few resistors parallel over the bulbs to create the 7.16 Amps. BUT those resitors becomes terrible hot..!! So for me never an option. The best you can do is get an electronic flasher relay, as those are: load independed, so they blink at a certain rate no matter what you attach to it. Led or bulb. Hopefully this helps you. If its not clear to you please do let me know. Greets The Old Mechanic

[@wtbnewname]

@@sophykim1758 on my 2011 CbR 600rr I had to buy a flash relay of EBay and it was a straight swap no cutting or anything so probably same for 2007

[@sophykim1758]

@@wtbnewname do you have the link for the seller ?

[@waynebanthorpe]

My front left indicator stopped working. Changed the bulb and the contact points are clean. Still not working

[@TheOldMechanic]

Do you have the Motoscan app ?

[@waynebanthorpe]

@@TheOldMechanic no. Any good?

[@waynebanthorpe]

I can only find the app for BMW motorcycles

[@willmoua1]

Where to find this led flasher relay?

[@danielduran3265]

CAN SOMEONE POST THE LINK FOR THIS RELAY!!

[@TheOldMechanic]

Hi Daniel www.aliexpress.com/i/32947970727.html Greetz from The Old Mechanic, ride save 👨‍🔧--->🏍

[@bamboozlebamboozle6820]

Earth is flat

[@bluecollarbiker8005]

Why are you showing people how to splice into their wiring harness making it's such a hard job to make your LEDs work properly all you got to do is replace the freaking flasher relay to an electronic flasher relay

[@TheOldMechanic]

Okay, give us a part number of that relay