HP PAVILION X360 CONVERTIBLE TOUCH SCREEN DIGITIZER REPLACEMENT| ONLY DIGITIZER

Hi, welcome back to the channel. Today in this video we are going to replace #HP #PAVILIONX360 CONVERTABLE TOUCH SCREEN #DIGITIZERreplacement.
This is only if your x360 LCD is working but top touch panel if cracked.
let me tell you the good side and the bad side of this repair.
good side: cheap and low cost for the part expense.
bad side: Very odd and hassle repair.
Please subscribe to my channel if you like this video.
=================================
Follow us: / thepcphone
follow us: / thepcphone
follow us: / thepcphone
like us: / thepcphone

[@enriquebobadilla6961]

Gracias con tu video ahora se como realizarlo de la forma adecuada. Sigue así!

[@iainp3976]

Thank you! This really helped me perform the same repair.

[@thepcphone]

I am glad that it helped! Hope you would subscribe to my channel. Thanks

[@paulmeikleham590]

Thanks man great video, will use this to replace screen glass and digitizer for my mum's laptop

[@thepcphone]

Glad I could help.Hope you would subscribe. Thanks

[@MRL3234]

Great video sir!!! Thank you

[@thepcphone]

Glad you liked it!Hope you would subscribe to my channel! Thanks

[@mohammedsalauddin683]

thank you it really helped me

[@thepcphone]

Glad it helped!Hope you would subscribe to my channel. Thanks

[@williamwalker301]

Thank you so much!!!

[@blacksage6317]

what was the adhesive tape you were using im gonna fix my x360 14ba I just need that or should I use glue?

[@fahedkhan2732]

Dear friend, Thanks for such a nice video. I have replaced the digitizer + bezel. I want to know after fixing the LCD panel to bezel using screws, which tape (the black one which was used in original) has to be used to seal the LCD along four sides? Please do reply.

[@thepcphone]

Glad it helped! I did use just double sided tape and the bezel comes with some kinds of plastic anchor/Hooks so if you press or crunch the LCD panel and bezel both together it should be clicked and stay together. Double-sided tape just to keep extra support!! Hope You would subscribe to my channel! Thanks

[@fahedkhan2732]

@@thepcphone @thepcphone Thanks for prompt response. I have used the double sided tape to fix the LCD panel with Bezel but I noticed there is small particles of dust. So I want to seal it. Since at the time of installation, there was black tape already available which was required to tear off ( please refer the video at 5.57 min) and then screen was detached from bezel. So if the know that tape, please let me know.

[@thepcphone]

If the original adhesive are not damaged, then it is always best to leave the original adhesive as it is. The original adhesive even stronger ! Now if the original adhesive are damaged due to disassembling the bezel then remove the messed adhesive first completely and reapply the double-sided tape.

[@fahedkhan2732]

@@thepcphone OK Dear. Thanks for clarification. I appreciate your sincerity.

[@user-bt1kh1mq3z]

❤❤

[@askeriekame4550]

Thanks bro. I need to know where did you buy the glass from?

[@thepcphone]

I i have got it from ebay uk. the seller had only one item in his stock. keep looking on google , hope you would find it.

[@pdhana69]

I need it for HP Pavilion x360 Convertible 14-ba0xx. Is the product same ? pls respond

[@paolapanting6827]

Is it the same digitizer for hp 360 14ba009la?

[@sailorworld2232]

Hi I need the same repair please tell me from where I can buy screen ...it's help me a lot .. thankyou in advance

[@Britain7322]

💙💙💙

[@thepcphone]

Thanks

[@abu3bdu]

I have the pavillion Model 14-ba101nx, I can't separate the screen from the plastic, it is all glued strongly. Is there anyway ?

[@MatthewRivers]

Great video. A little question, I have exactly the same break on my HP. Same model and everything. I literally NEVER use the touchscreen. Would it work just fine if I only disconnected the digitizer rather than replacing the screen? Thank you

[@thepcphone]

Glad I could help, Hope you will subscribe to this channel. Thanks for your support.

[@doclorianrin7543]

You can go into your windows settings and disable the touchscreen driver/feature. That will give you the same effect you desire without messing with any hardware.

[@jesmine4711]

👍

[@thepcphone]

Thanks

[@suhanayesmin3118]

💕💕💕

[@thepcphone]

Thanks

[@naveenk6387]

Hello . .I have HP Pavilion x360 dh1178tu laptop . . I have the same need but local technician says that digitizer may be bonded to LCD if then may be not possible . . Can you confirm that digitizer cannot be seperated

[@itstufftoshare1896]

I dropped my HP Pavilion x360 13-u003la.. touch on the display seems is OK, looks good there is NOT broken glass, but I am not able to see anything on the screen, I can see all connecting an external monitor. do you know if I can change only the display? or the touch come pasted to the display? thanks for your help in advance.

[@praveenbhati3497]

have u got it repaired.. and how much does it costed u?

[@stuaxo]

Hi, on a slightly different x360 model (BQ101NA) I replaced the screen, with lcd + digitiser all built in. Everything works except a 3 inch strip about half way up, have I bought a faulty LCD + digitiser assembly ?

[@thepcphone]

Did you apply too much heat ? if you did then it crups the plastic prong and thats why it does not attach correctly.

[@stuartaxon2898]

@@thepcphone I didn't apply any heat, as bought the screen and digitiser as a single unit. The people I bought it sent another one, which doesn't have the issue but the new one can't calibrate fully. Presses near the bottom register as further up, annoying !

[@examrulingday8161]

Could you please tell me whether I have to change the full screen bcz from left side to the bottom of my screen get uprooted slightly a little bit, so please suggest me whether I have to change the whole screen or not??

[@thepcphone]

yes you can change the whole screen even it would be more easier. please do search with the laptop model in Ebay or google it . Hope you would find the replacement for it.Hope you would subscribe to my channel.Thanks

[@urielramirez787]

i have one model x360 14-cd00041a, do you think it is the same process?

[@thepcphone]

yes it is same almost. But do some extra care when you apply the head as because the extra head could damage the shape of the hook or bezel.

[@ivanurban2383]

I have an hp envy x360 15”. Where could i get a digitizer for it?

[@syamsuarhamka2701]

where we can buy the touchscreen and tempered one ?

[@1989riyas]

Is this possible to do in hp x360 chromebook

[@a.geckyn4224]

Is the digitizer compatible with HP Pavilion x360 - 14m-dh0001dx and possibly other 14m models.

[@thepcphone]

To be honest HP always unfair with the replacement part. They always try to make things more complicated for independent repair. I would say give it a double check before you replacing. The models two are almost same as you mentioned .Hope you would subscribe to my channel to show your support. Thanks

[@juanpablos5590]

is it possible to do the same with hp spectre x360 13-4124nl ?

[@thepcphone]

It should but still see the pattern of the replacement part so that you could make sure about it.

[@moyeajinomisanghan8160]

Would this pavilion touchscreen work for the spectre model too

[@AndrePaivaParizotto]

I changed mine, but the touch only clicks and doesn't drag. When I open the screen near the bottom where the metal tape that sticks to the display is located, it works perfectly, what could it be?

[@AmitKumar-dy3rg]

sir I have Probook 440 G1 x360. And i am unable to find the digitizer for it . Can you help please

[@thepcphone]

I have no Idea about Indian tech market. Sorry about this!

[@ariyaansadiq]

Hello I wanted to change my digitiser of the same laptop. Please help me

[@thepcphone]

How can I help. For further help, you may contact through my Facebook page. `Thanks

[@mohammedsalauddin683]

i want the same repair suggest me a repair shop where it can be done i live in india

[@thepcphone]

To be honest i don't have any idea about Indian tech market specially for buying parts for repair. Sorry about this.

[@drsareen857]

Brother I'm in india and here do you know anyone who change only glass of hp pavillion laptop convertible 14-cd0xxx as touch is working fine and glass slightly cracked.. n how much money I have to pay to change the glass only

[@fernandojs1111]

minute 6: tried this stunt and end up with 3 or four lcd displays. be careful the lcd display has 3 layers or more.

[@mainbairagi8442]

digitizer hp pavilion x360 14dh-1179TU is it available ? Pls send me the link

[@noorjabeen731]

is ur problem resolved? i have the same issue

[@mainbairagi8442]

@@noorjabeen731 No

[@jadeonyt4739]

I tried this but now when my laptop is on, my display isn’t showing

[@JoseRodriguez-mk6pb]

Plastic? Or cristal?

[@thepcphone]

plastic

[@krreena242]

only touch kaha millega

[@AmitKumar-dy3rg]

How much is the total cost sir

[@thepcphone]

The actual digitizer cost me 22GBP that's all!!

[@AmitKumar-dy3rg]

@@thepcphone but sir I have have Probook 440 G1 x360. And i am unable to find the digitizer for it . Can you help please

[@yolyldz5308]

Please Homepage HP PAVILION X360 CONVERTIBLE TOUCH SCREEN DIGITIZER REPLACEMENT| ONLY DIGITIZER Thanks!!!