Using Rec Room AI To Make Your Monster | Rec Room Circuits Tutorial

[@Speed-TV]

Fun fact: The skeleton in the thumbnail is from a game called rec room

[@theRCLman]

Really counter fun fact: barry started in roblox but got a promotion to rec room

[@randomgoober_3647]

NOO WAY!!!!!

[@kalebvrsux]

WAIT ACTUALLY????!?!?!?!?1?1!?12!

[@TheGamingCommie]

It’s skeletoning time

[@KamAnimate12]

REALLY!?!?

[@theRCLman]

**ATTENTION** 1. THE SPAWNER GADGET HAS CHANGES HERES HOW TO GET IT WORKING AGAIN kzbin.info/www/bejne/aYSuc3aKfLmfbrM 2. for rooms with many players you must add a "If local player is room authority chip" after the 30hz receiver, and then output to the respawn

[@ArchivesRR]

Can u provide a timestamp so I know which one to change

[@theRCLman]

Unfortunately i didn't realize until after the video to add this but you add it in after the 30hz reciever

[@thegentlemanedit]

I've seen quite a few of your videos about making a monster follow a player but this version of doing it is by far the best one so I thank you for uploading it

[@theRCLman]

thank you for watching :)

[@partydonut214]

This tutorial was useful for me in other ways! I used this yesterday to Clamp a Name Tag (Text) to an AI, and I am revisiting for the 1 Use Trigger Volume! Great Tutorial!

[@theRCLman]

Thank you for watching :) glad it helped

[@-Smile]

I'm not sure why but I cant get the monster on the top map to move or do anything at all I've rewatched a few times and I cant get it to work. Do you have any idea what could be happing?

[@theRCLman]

hmmmmm is there an error noise, what does the log screen say

[@JayCreationsRR]

Hey is there any possibility that you could make an updated version cause this is kind of out dated and a lot has changed with cv2

[@theRCLman]

it all changes so fast

[@galacticphoenix]

How to make a AI where it stops chasing you when it is out of sight

[@JPGpack]

Make the sight very short

[@theRCLman]

there is a change line of sight parameters chip change the sight to a lower number

[@galacticphoenix]

Yea the problem is that if your close to him he can detect you around the wall and also when your out of it sight it stands still until somebody near it.

[@dustinsgamingreality]

So you can change the npc so configure the circuit board and click the configure object button

[@theRCLman]

you can delete him and put the monster tag on yours

[@Mr.Man_Guy]

I've been wanting to do this for a long time and this dude was the only one to explain in detail that I can understand, thank you so much :] 🐶

[@theRCLman]

thank you for watching glad it helped :) 9%

[@kangwalagliderh6315]

How do you make this work when the monster has multiple parts and/or an animation gizmo. Along with other gizmos like a look-at gizmo or a stage light/point light?

[@theRCLman]

best thing to do is attach the animation to a cube or invisible collision that is following your under monster, then you animate your monster then once you turn animation one it will follow where the animation gizmo goes, kinda hard to explain

[@kangwalagliderh6315]

@@theRCLman Should there be a video on it?

[@EMPDRK]

So I did all the cv2 right but the monster won’t respawn at all why???

[@JPGpack]

You might have crossed a wire or something try watching again (it happened to me too)

[@theRCLman]

is modify with circuits on?

[@Tedspuppits]

Hey RCL! I have a question, can you make a updated tutorial cuz I can't seem to get it working!

[@theRCLman]

Working on it

[@abaier82]

Could you make a video in the future about how make powerups kind of like ignited Freddy's

[@theRCLman]

Thats a good idea

[@Christian-campa]

Fr

[@macthetv8882]

About the If chip what is stoping me from setting the trigger volume to only plays one time

[@theRCLman]

is that a thing, do that if thats a thing

[@Blinky_B]

Hey RCLMan! I just copied this into my game and have a few questions that I was wondering if you could answer for me! So first of all, my monster wasn't looking at me when I activated it, so I'm not sure if I missed something in the video or if I was supposed to do something else. Another thing is, I am making a game that is heavily inspired about the rec room poppy playtime - but with a dinosaur. I was wondering if there was a way to animate the monster and give it a jumpscare, but it can't walk through walls. and is similar to this a.i. One last thing: if there is a way for the monster to be animated, is there a way for your monster to be able to change walking animation into a running or crawling animation for going through vents or chasing people. I know its obviously a lot of questions and would be hard to answer, but I was just wondering if you knew a way to fix/help with these things.

[@theRCLman]

all of these are possible very hard to explain. 1st i would say make sure the pivot point is correct if not looking at you but there could be multiple issues depending on what is happening. as for animation. what you need to do is make the above enemy a small cube then get your animation gizmo and attach it to the cube via a clamp or other gizmo, black part wire to cube, animation gizmo (black part) wired to the gold pin on top, once you turn the 0 to 1 the animated object should start following the cube

[@Blinky_B]

@@theRCLman Thank you so much for the tips. I saw that someone else commented something similar and you gave the animation with a cube advice to them, so yesterday I animated it and clamped it to the cube. I haven’t tested out the Ai yet with it because I was doing the animation, but today I will try out the ai! I will also make sure that when I do the ai, the pivot point will be positioned properly. Thanks for the help man - you have basically helped me with all of my games where I use ai!

[@FettGaming779]

How do I make it not make noise and not charge as the fire barrel goblin and the thing that moves with the ai tilts like a look at gizmo

[@theRCLman]

for the noise you just have to move it so far down under the map no one can hear it, idk how to make it not charge, you would have to attach a look at gismo to the thing you have following ppl

[@Thewatchghostprod]

This just gave me a ton of ideas you know how you said don’t use walls or furniture? I’m gonna use it bc I want the npc to be able to interacts with the walls bc I’m gonna make an open area with some walls I won’t use outer walls but I’ll use inner and I’ll use furniture

[@theRCLman]

cool :)

[@Cart1416]

So when trying to spawn AI into my rooms it never works anymore, I tried Spawner Gadget and Spawner Gadget V1 but they both never work.

[@theRCLman]

hmmm i just tested still seems to be working, maybe try an event reciever set to room loaded to spawn it in

[@Cart1416]

@@theRCLman Even using a button it doesn't spawn in

[@theRCLman]

Hmmmm Strange i tried it earlier today, is it possible you have a glitched room

[@Cart1416]

@@theRCLman I'm starting to think there is something wrong with my account, or maybe it is because of Android

[@PatrickGTV]

I’ve been waiting for this tutorial for a while! Thank you for making this RCL!

[@theRCLman]

Glad it helped thanks for watching :)

[@dexts_onix]

Hi, the panel says "[Get Position] Error: Combatant is invalid!" I tried everything but it doesn't work :/

[@theRCLman]

is the monster below spawned yet?

[@dexts_onix]

​@@theRCLmanYes

[@Funtime-Froner_Gaming]

Hey RCL I just want to say thank you for helping me for my bugged monster and apparently the issue was that the tag of my block was the same than a other object in my room. Sooo that’s my bad. 😅 If you’re curious of the log said is “ get position of object failed make sure you’re object has enabled can modify with surcuits. 🐕

[@theRCLman]

Ayeee 9% :) glad it got sort3d

[@PatrickGTV]

Omg finally!! I’ve been waiting for a tutorial on how they do this!! thank you RCL!

[@theRCLman]

:)

[@smileydoesstuf4194]

This wasn't what I needed, and I might never use it. But I still watched the whole thing because it was entertaining. Keep making the great content dude!

[@theRCLman]

Thanks man:), what were you looking for?

[@ruthmcveigh8903]

Why would you say that, you really shouldn’t have said that

[@AlfredVRreal]

Hey your probably not gonna see this but was wondering if you can make a tutorial on how to make like working airstrikes or some cod kill streaks. Can’t find any videos on any and everyone charges tokens. I’m only 13 and I don’t have a job to buy tokens so was just wondering thanks

[@theRCLman]

ohhhh thats interesting, idk if i will do video but i will dabble to see if i can find out

[@AlfredVRreal]

@@theRCLman alright thanks

[@StarionEdits]

FINALLY! Ever since you showed me this i was excited.

[@theRCLman]

Hope it helps :) thanks for watching

[@SusDoctor]

I'm just curious How do you make a portal gun in rec room?

[@theRCLman]

I am also curious i wanna go see if i can figure it out

[@oliverbrinkworth4779]

​@@theRCLman did you figure it out? Could use with a tutorial for my game.

[@ShellLurker]

my 'monster' is always facing 90º from me? Also the pivot point is at the front of my hamster charicter

[@JPGpack]

Blue towards you red to the left and green facing up (pivot point when editing)

[@theRCLman]

sounds liek you need to move the pivot point so that the blue is points forward

[@ShellLurker]

Ah but how do I move it? I can see it but I can't move it

[@JPGpack]

@@ShellLurker you edit the monster as a whole and then move it so the face has the pivot point in it

[@JPGpack]

@@ShellLurker and go to general settings in the maker pen and click the switch of show pivot to be on

[@PandaSwordsman117]

As a circuiteer I'd say a lot of this is accurate, but it only works for certain kinds of games, like SCP-096 or Ignited Freddy. Then again, the steps to making a fully custom and complex ai are tedious and make me want to cry so I can see why you didn't go over that. Good tutorial either way

[@theRCLman]

Omg yes u get it. Like when someone asks "can you make a boss tutorial? It's like what kind of Boss do you want a boss you can shoot do you want a boss with stages there's so many possibilities I can't possibly cover them all

[@PandaSwordsman117]

@@theRCLman yeah, the variability of an AI is endless, and even small changes can take an entire day's worth of work and bug fixing to do, so I can't really see anyone making a tutorial covering all of them, but for a basic ai that can be changed into a decent amount of different variants I'd say you pretty much hit the nail on the head.

[@benjalazo5244]

Lo intente hacer pero no me salió el respawn gadget, así que no pude hacerlo

[@theRCLman]

tienes que habilitar el contenido beta, al principio te lo muestro y lo digo

[@MidnightAnimatesSFM]

Advanced AI. Can't wait for Rec Room to have AI setting variables and executions instead of using this method. That'd be good.

[@theRCLman]

Thanks for watching:)

[@spencerworld3167]

so uh i got the ai to work but it wont go places like the living room and it will instead go up stairs and i haven't fgured out why. also it tracks me even whe vison is low. also cone vison detaches the charater from it's model... plz help....

[@theRCLman]

wat? maybe check the purple naV mesh and make sure its actually covering the area??? ummm just another guess maybe widen the under map

[@ArchivedGooning]

This is a great tutorial however. Can you please do an add-on to this video on how to attach a seat jump scare to this sequence that would be great. Thank you

[@theRCLman]

you know i though it would be simple, like just do what i did in the other videos, but when i sat and though a bit it actually is completely different i think i will try to do video on it

[@hanlo.411]

hey. I've got the model following now. I need to know how to animate it now?

[@theRCLman]

as for animation, animate the onster in place then attach the animation gizmo via a clamp to some other pbject like and invisible collision and instead of having the monster follow people have the invisible colision follow people instead

[@coolusername9244]

Love your content man! I was wondering how you could make an AI that stops moving when you look at it. Keep up the amazing work!

[@theRCLman]

Weeping angels? Thanks for watching:)

[@FireCrackerAnims]

Like a boo from mario? That sounds cool. Maybe friend me on rec room and I can help you next week with it. My account name is @FireCracker51

[@ghostie_the_silly]

Hello in the newest updaye in recroom I don't see the spawner gadget I only see "spawner component" and the v1 virsion. Is this not right or is it just re-named?

[@theRCLman]

thats probably it, this was made a while ago

[@BigBoyVR1221]

Wait but can you tell us how to do the poppy playtime npc

[@theRCLman]

This is pretty close just the animations are different check the videos in the end screen

[@lvr4558]

Ya he’s right

[@Wh0sJoe]

hey I have a question when ever I do this my monster model is like in a weird pose or in the ground side ways do you have any idea what I did wrong cause I focused on everything maybe I missed something?

[@theRCLman]

sound like the pivot point is not lined up right

[@Wh0sJoe]

Alright thanks but one more thing please, is there a way I can make it not look up like say I fly up it will look all the way up at me

[@lvr4558]

Hey RC what you could also do is with your videos you can make a whole movie part with all of the ones with bob the orange monster in it and it’ll be easier too when all are together with tags to each part

[@lvr4558]

Barry my bad

[@theRCLman]

Hmmmm like 1 big how to make a game video

[@MoreJahkiLive]

@@theRCLman yes. now that’s a video I see people in your comments are asking for

[@lvr4558]

@@theRCLman just like all the ai tutorials that are connected together

[@lvr4558]

@@theRCLman like a whole ai tutorial packed into one and all the different ones are in one section

[@MasterSniper103]

The monster model I used was rotated looking straight down instead of looking at me. How do I change that?

[@theRCLman]

you need to edit the pivot point of the monster model, similar to this video kzbin.info/www/bejne/pGnLoKuon9BlbNk at about 1 minute in

[@Anthony_BTV]

YEEEESSS! THIS IS WHY I AM SUBBED!! Now I can make an ignited Freddy style map! Also, can I just hook up a clamp, animation gizmo, and trigger volume for jump-scare? I’m not sure if it would work but I’d like to know if anyone knows!

[@theRCLman]

Yes that shoukd work :)

[@Anthony_BTV]

@@theRCLman thanks!

[@Anthony_BTV]

@@theRCLman so I’ve hooked up a clamp and made an animation, but it doesn’t work? I made all parts so they can be modified with circuits, but it just stays in place? I’m confused

[@-Frosty-]

@@Anthony_BTV to late, Ignited freddy is already made

[@theRCLman]

Hmmm make sure your hooking the monster to the black part of the clamp and the trigger volume to the gold pin

[@JoaoKunSpark]

bro, everything is right that I did but when I go to spawn the component, the monster keeps looking down as if it were its face, Is there a way to fix this?

[@theRCLman]

sounds like your pivot point needs to be adjusted

[@JPGpack]

@@theRCLman in what position should it be from my monster

[@JPGpack]

@@theRCLman red to the left blue towards player and green upwards?

[@Rawanproductionandother]

Can you use Barry2.0

[@scottishgames100]

Who's that Barry 2.0

[@Rawanproductionandother]

It’s on Rec Room

[@theRCLman]

I haven't made one, if i did then i would use it lol

[@ISTILLQUIT]

Who is barry2.0

[@theRCLman]

@@ISTILLQUIT not official LoL

[@Void_Pulse]

Can you make a new tut of this video please i need new details to the ai

[@theRCLman]

I think thats a good idea, i will add it to the list, not sure how long till i get to it

[@12hr27]

You prolly won't see this but I'm trying to make a backrooms game with my friend and when I try to find spawner gadget it only gives me cv1 how do I get cv2

[@theRCLman]

i believe its in beta still also it is now called a spawner component

[@joseffini3671]

Hey rclman I used the tutorial off Mexican bread which worked great only problem I have is whenever the ai has killed someone it freezes for a couple of seconds and then proceeds to start moving again I would like to make it so it instantly goes to the next nearest person so what do I do?

[@theRCLman]

I am afraid you are stuck, maybe switxh to a different enemy, i originally wanted to use goblins in this vid but they will only follow 1 player and won't switch to the closest

[@joseffini3671]

@@theRCLman that’s also a problem it’s not letting me switch ai for some odd reason

[@Kingfatbear]

thank you and whatever algorithm things put this on my recommended

[@theRCLman]

🙏 thanks algo

[@NekoCoreNetwork]

Ayyy! always a pleasure to help out!

[@NekoCoreNetwork]

🐶

[@theRCLman]

Ayeeee 9% gang :)

[@VoidyL3vi]

so my model isnt rotated properly idk why but it isnt and im too stupid to figure out how to fix the roation of my model

[@theRCLman]

Starts chase then stop chase then adjust it to be normal, it may still be croked before it chases you but after it starts it should be normal

[@thegentlemanedit]

Hi rcl, Do you think it is possible to use cv2 path points to help with wall collision? Kinda like the poppy playtime game where huggy wuggy follows but thanks to his path points he doesn't get stuck

[@theRCLman]

ohh yes im sure that would help it

[@ATJkaos]

Hey RCL my monster isn’t moving but I think it’s because it has a walking animation any tips on how to fix it?

[@theRCLman]

is the animation set to 1, i believe it will not follow if not on, but also with an animation gizmo i believe you still have to attach it to something which is following the below monster

[@JJJ12358]

Thank you so much! Very cool!

[@theRCLman]

thanks for watching :)

[@J0n4rez]

Is there a way to disable the skeleton sounds that the NPC makes?. since it kinda gets too obv at some point,

[@theRCLman]

unfortunatly the only way is to move the skeleton way down below

[@J0n4rez]

@@theRCLman yea also by doing that will decrease the line of sight.

[@recroomllllu]

For some reason when I connect the object to the from recroom object chip it's says object not found do u know why ?

[@theRCLman]

hmmmmm maybe the tags don't match or maybe hmmmm ill have to see if rr changed something

[@moon_6462]

how do i fix it saying the rotation is error it starts to say error at the get position after the AI get target

[@theRCLman]

hmmm does the log screen say anything, maybe se if the inputs are valid

[@DxDKnows]

Will this work with walking running and jump scare cycle?

[@theRCLman]

kind of you have to have it stop following and add the cycles in but after the scare and what not have it go back to following

[@dadragon7299]

Do you know how to make it have a seated jumpscare with this system?

[@theRCLman]

i actually havn't tried my guess is its similar to the regular one but maybe if player is in a seat then stop following, its been so long lol

[@temporaryvr]

OMG IVE BEEN WAITING FOR THIS FOR FOREVER THANK YOU RCL

[@theRCLman]

Np srry it took so long, thanks for watching:)

[@pegasusrr3156]

How do make the monster have a radius you have to be in for it to attack you

[@theRCLman]

You will need to mess with the line of aight parameters i think, look for a chip that say set line or Sight then set it just after apawning in the ai, gonna b tricky cause of the distance but exp with ir

[@pegasusrr3156]

@@theRCLman is there a way to make a blocking system So you can block to avoid damage

[@Polvo1223]

2:39 I thought the spawner was broken like it wasn't configurable when the enemy object is set, is it fixed now?

[@theRCLman]

idk if this fix still works but kzbin.info/www/bejne/aYSuc3aKfLmfbrM

[@VenyxIGuess]

Ayo dust?

[@fredtheguy7015]

Is there a way to mute the audio that the monster makes?

[@theRCLman]

the best option is to move it further down and increase the range on the Line of sight chip

[@bike_vr]

I can’t find the spawned only the v1 legacy spawner😊

[@theRCLman]

Enable beta content

[@Holgerkatt]

in the log screen it says [get position] error: rec room object is invalid

[@theRCLman]

my guess in tags were not on object?

[@aleixity101]

Having a problem. It's been saying error for a while and I was wondering why. It won't pick up my tag for the skeleton AI. No matter what I put, I even kept the original tag for the object but it will not get the tag. Please help.

[@theRCLman]

has the skeleton spawned in yet if not try spawning it in then it should start, also make sure modify with circuits is on the top enemy

[@rowanwright]

How do you make him change players to look at when the ai switches targets

[@theRCLman]

It should switch automatically, thats why i didn't use a goblin cause it wouldn't switch

[@Bananamonkeyperson]

This is actually really simple if your looking to do this pretty fast! Good job!🐶

[@theRCLman]

thanks man, just waiting on rr to fix the spawner now lol

[@IAmJustAGoose]

How do you stop the skeleton from making noises when its walking or attacking

[@theRCLman]

unfortunatly the only way to stop it is to make it way down so no one can hear it

[@ShellLurker]

i cant find the v2 spawner gadet? any help?

[@JPGpack]

Enable beta under (this room-settings-(scroll down and press the switch next to the beta option and save)

[@theRCLman]

make sure to enable beta content your room

[@derekgoodwin6664]

Does the hallways have to be 3 metres exactly or can it be bigger?

[@theRCLman]

bigger is fine just not smaller

[@ImaGoofyGoober-Rahhh]

It does no work for me I had a monster that was not 1 object and only the ai would spawn and the monster stayed still Could you help me fix it?

[@theRCLman]

Did you havr modify with circuits on

[@ImaGoofyGoober-Rahhh]

Yep

[@TheAverageBaconHair_RBX_GT]

hey i have problems, i need help with the vector thingy im trying to fix it for my backrooms gaem

[@theRCLman]

what the specific issue?

[@TheAverageBaconHair_RBX_GT]

@@theRCLman the y axis thingy im having trouble.

[@TheAverageBaconHair_RBX_GT]

@@theRCLman im back and reattempting this and uhh i need help with one particular thing.... the nav mesh won't bake, i did what the thing said , but it ain't workie :( pls help

[@TheAverageBaconHair_RBX_GT]

nvm

[@-arcademaster101-]

I can't find the updated version of the "spawner gadget" chip, does the legacy version work?

[@-arcademaster101-]

nevermind, forgot to turn beta on!

[@theRCLman]

word glad it got sorted

[@Cintres]

how do you make it still so it won’t look at you if you go above it or under it

[@theRCLman]

Not actually sure how to stop this mqybe if gets there have it stop following

[@SM_I]

Whenever I spawn in the Al my my monster I created does not follow the exact path of the AI it does not move

[@theRCLman]

hmmmm is modify with circuits on the monster, are the tags all matching an applied? do you hear and error what does the log screen say?

[@SM_I]

Yes all tags are Applied and all of the parts of the monster have Modify with circuits but there’s always a beeping sound when I have my maker pen out

[@GgrimrodD]

This works extremely well! However, when I do multiple I run into some issues. I keep getting an error with the third AI monster I've made, "Combatant is Invalid". It stops the monster dead in his tracks until I go down and manually unwire and rewire the Get Combatant chip. It makes no sense, and looking it up yields no results as usual, does anyone know what's happening?

[@theRCLman]

wow im surprised you even got multiple to work, honestly i think that might be why combatant chips are still in beta they seem to not be very reliable

[@GgrimrodD]

@@theRCLman I was shocked too, for a self proclaimed circuiteer I'm pretty dependent on tutorials. If I find a bandaid fix I'll be back to share lol!

[@GgrimrodD]

@@theRCLman I have gotten not two, not three, but FOUR working AIs in one room. The trick is to use a "Combatant get ground position" chip instead of a regular Get position chip after the get combatant chip. I hope that makes sense

[@Gumdrop1]

When i tired to test it it just made the error sound im going to rewatch the tutorial

[@theRCLman]

Check you log screen see what error you got

[@Gumdrop1]

@theRCLman I fixed it but the ai doesn't chase 2 people in only chases 1 is there a way to fix this?

[@DestinyyyGmz]

I tried but I kept getting errors I have tried 4 different videos so far so I gave up

[@Horror-King]

Im making a game that u need to get 8 onions Is there a way to make the ai go faster each onion u collect?

[@theRCLman]

there is a way but its super complicated. since you can only set the monsters speed on individual spawners you would have to have it follow one monste, then one a ring is collected destroy that monster and a have a new monster spawn in with higher speed. if you configure a enemy one you select one you can change it speed

[@mrhelpful6202]

I have a problem that it gets glitchy when multiple people join is there a fix it is it just me

[@theRCLman]

Look at the pinned comment, you need a is room authority chip after the 30hz

[@TheSynderOwner]

ive been using this in my rooms but can you make a tutorial on a pathfinding bot like this but without using beta and vectors

[@theRCLman]

unfortunatly it has to be beta, pathfinding???? my guess is to use pathpoints?

[@TheSynderOwner]

Oh I didn't mean to say vectors

[@JPGpack]

What if it has an animation gizmo and in two halfs

[@theRCLman]

use a cube as your monster then attach you animation gizmos to the cube via a clamp

[@JPGpack]

@@theRCLman ah

[@JPGpack]

@@theRCLman okie dokie

[@JPGpack]

@@theRCLman black to the cube and gold to the ani gizmo right?

[@JPGpack]

@@theRCLman oh so the base to the cube and the gold pin to the animation gizmo? I have to have someone over explain for me to understand but I think I got it

[@stumpyrogue]

But how do u make it patrol an area then chase u when u get spotted

[@theRCLman]

Soon ... soon

[@KidFromTabor]

has the spawner gadget been renamed beacuse i cant find it

[@Yoooonig]

wait so i cant use objects that cant be modified with circuts?

[@theRCLman]

i think in depends cause like you could move a piston or something like that in the position but idk about like a water bottle hmmmm

[@TheTransBlender]

I think I followed the guide correct but for some reason it says the combatant is invalid for the rotation? Besides that it works like a charm for me

[@theRCLman]

what do you have hooked into that?

[@TheTransBlender]

@@theRCLman i fixed it now, apparently I didn't have the line of sights parameters set correctly. Thank you for the video!

[@OfficialYeezyVR]

Hey RCL, this tutorial is good and all but I’m trying to make a game were the monster walks and then when get triggered like the I heard it to game when you get to close to the monster then all the sudden it screams and then starts chasing you, I talked to one of the creators of the game and they said they used a goblin under the map sorta like you did but it doesn’t work like that for me, do you have any way for the monster to walk at first and then all of the sudden get triggered?

[@theRCLman]

you can configure the rec room ai to spawn in not in combat mode then it will just search until it detects a player then will chase, not sure the exact setting but configure the under monster and look to see

[@OfficialYeezyVR]

@@theRCLman Ok, it works thank you so much this really helps!

[@MonkeyBoyTK]

When I wired the 30 hz to the respawn it went black and started beeping

[@theRCLman]

seems like you have something hooked up wrong or to much going on with other circuits, check log screen

[@Holgerkatt]

my monster keeps on going upside down instead of on its feet

[@mrRaphielRR]

Thank you for this tutorial, but do you know how to make it when the ai don’t see anyone the monster will do a walking animation, if the ai sees someone the monster will do a running animation?

[@theRCLman]

hmmm i am not sure it there is a chip that executes when a premade ai dis engages, my guess would be to add in a extra if that says if target is out by a certain distance then play animations1 then when target is found use a cv2 to cv1 converter to play animation 2 however historically these are becoming less and less reliable

[@MrSalas988]

I did the tags circuits and everything right and the skelton works but not the monster😢

[@theRCLman]

Make sure modify with circuits is on your monster, also be sure the tags are submitted, also see if youa re getting any errors on the log screen

[@MrSalas988]

@@theRCLman I've got all that and I've eve remade the whole thing😭 I think I might just use your follow v4 wall collision. I really tried but the monster doesn't seem to move with the skeleton, I tried to make sure it was cause the monsters parts are separate, so I used Barry for example and still didn't work, so when I went back to my monster isk what I had done wrong, tags are all right, wiring is right and everything😭

[@Ich.bin.englisch123]

hey RCL could you tell me how to activate an animation when a player enters a trigger volume while the trigger volume is connected to an audio sample?

[@theRCLman]

I believe there is a play audio chip now, but also on the audio player you can probably just hook the player entered to the audio player, did that help?

[@YeetgamingYeet]

I’m having a issue where the premade monster won’t spawn no matter what I do, can you please help?

[@theRCLman]

i think RR broke it, im about to check it again to see but o tried on xbox last night and the spawner was not working, i really hope they fix it soon or do something at least cause it was really usefull

[@BigBoyVR1221]

OMG I have been wanting this for soooo long

[@theRCLman]

Hope it helps thanks for watching:)

[@toastyyy___]

im getting an error when trying to get the target position, how do i fix?

[@theRCLman]

hmmmmm i am wondering if this is one of those things where it will error until the enemy spawns?

[@FortniteHulettFN]

Hey. How do i make the ai change from going to a player, to going to an object?

[@theRCLman]

not sure if you can do this, because i believe the monsters are set to follow only p[layerts

[@FortniteHulettFN]

@@theRCLman u could use pathpoints

[@yeetyeet5278]

I’m whith this I’m going to try to make the goblin king . Oh boy this will be fun!

[@theRCLman]

whoa a whole boss, thats a challenge

[@bigfatchungas6437]

Best tutorials on KZbin this was easy to follow and really good results

[@flamethedude4300]

I have a few questions... 1. How do you fix the problem i have where the character is like upside-down? 2. How do you actually hook the animation up to the monster? 3. It also just occasionally doesn't work, like the character won't be moving but the skeleton will. Its kinda a 50/50 chance of happening.

[@theRCLman]

1. edit the modle and flip the pivot point 2. turn a cube into the thing that follows and attach a animation gizmo via clamp and animate your monster and turn animation on for it to start following 3. do you have other circuits running, see if you are getting an eroor on the log screen

[@SpeedsterStrats]

@@theRCLman Is there a way to make your ai npc to not make sounds

[@Tedspuppits]

RCL, What Is the chip that they used is ^MakeItToMidnight To Show The Exits and Players to bonky And More. You're my only hope to know what this is called so i can use it!

[@theRCLman]

its called objective marker i believe

[@Tedspuppits]

@@theRCLman How do you enable it tho?

[@Taramcarthur]

Great vid I just have one problem when trying to rotate the monster after I connect the chips it to the get position chip it says error even though I've watched the video 5 times it still wont fix do you know what's wrong this is when I am trying to connect it to the subtract chip

[@theRCLman]

Hmmmm seems strange maybe flip your pivot point 180 degrees

[@benwilkes6536]

Hi, me again, I tried going to this tutorial in hopes it would work, but I need help, I did everything asked in the video and triple checked. But sure enough, I put my hand in the trigger volume and it did not work whatsoever, someone please help! :(

[@theRCLman]

Ben so for this tutorial unfortunately rec room broke the spawner a few weeks after this video was made, this is why i don't like making turorials that ise beta stuff, i really hope they fix it soon cause i had other videos that used this as the starting point