Real-Time Install: How to install the Thermaltake TH V2 AIO Cooler

[@Funkyzombieboi]

Sarah coming back to us all like the ghost of Christmas past and dropping the nerd knowledge as well. You love to see it!

[@ThermaltakeAustralia]

🥰

[@stevearny686]

Thanks Sarah great presentation by you and the team.. as usual

[@ThermaltakeAustralia]

Thank you!

[@textpower3050]

Best video I have seen on ThermalTake AIO. Thank you Sarah and the photographer. You have done a great job. I just wish you would make a video soon for Intel CPU for a change.

[@ESheridan]

Thank you so much. I think you need big stylish cover on the table, which confirm and illuminate your cool team 😍

[@pnargaming1234]

I love thermaltake product,especially core p6,p8 case and I'm planning to built my pc with this case....love to see people built pc with this brand...

[@malte2046]

Thanks Sarah.😍

[@mrbabyhugh]

7:42 no, it is not about prioritizing where has more space, the priority is to be, in what orientation does the radiator & pump work best. The radiator is positioned correctly, i am not so sure about the pump.

[@BigRog203]

Fans should be the other way around, positioned for intake. In this video they are pointed for exhaust.

[@Tank02CA]

Great video!

[@Sparky-vx8so]

Really good video to follow, thank you. Does it matter what header you plug the fans into? The manual says cpu fan, but it looked like you plugged it into the system fan? The reason i ask - i want to change the aio fans to TT SwaFans, which i dont think have a cpu fan header connector? They have usb 2.0 connection instead. Thank you

[@tigerbalm666]

AIO are easier to install than Air coolers!

[@DSCARLETT702]

Picked this up and installed, the lcd screen turns on and shows coolant temp but the software for controlling it does not detect it

[@taahashahid4308]

did u figure out how to fix it

[@HighwayTrooper]

Im dumb as fuck cause this shit makes no sense

[@wcatesjr]

Is it me, or does that video card need some support?

[@travishall8068]

Hi, I have a motherboard that has a cpu fan and a pump fan header. Which do I use for the pump? And which do I use for the aio fans?

[@vodbank9100]

im replacing my cooler in the thermaltake frostbyte with this one but it doesnt have the clips on the motherboard installed, and the board looks like it only supports amd sizing for the brackets at the back, what should i do i dont know how to install the clips at the front

[@ewallacestudent1]

Thanks for taking your time and explaining.

[@jawnphotography5821]

Can a three fan assembly fit in this case?

[@mhasan4098]

Hay.. I bought this 360 one. But the Animation does not automatically start. I have to open the software each time to change it. How to fix it?

[@ttgill1401]

🔥🔥

[@ThermaltakeAustralia]

😍

[@gordanbennet5465]

Hi my th280 v2 argb snow-white only has only one connector on the water cooler

[@xzerokillx]

Thermaltake's rgb software sux so bad especially for their lcd screen AIOs do NOT buy those ones unless u hate urself. Pls fix it TT pleeeease

[@kevink8372]

This. Just got the 360. So disappointed because it's really nice LCD, just absolute trash software. Won't recognize the display. Got it to work for about 5 seconds (USB to microUSB from the back of the board) but then it stopped again. It's buggy software/drivers 100% and I am amazed there aren't more people on youtube or elsewhere documenting and raising hell over it because TT is a well known and respected brand and this is unacceptable.

[@notSBeX]

SAME ISSUE HERE

[@notSBeX]

​@@kevink8372same

[@nozers]

​@@kevink8372Is still bad?

[@user-xl8rq5ut9m]

Did they ever fix it?

[@gamingtothemaximum776]

The software isn't working, says that it can't find my fan controller

[@isaacsilva1950]

im just kinda confused on the fan wiring part

[@EscapeFPs]

I can’t get this to work at all not sure what I’m doing wrong

[@EscapeFPs]

I can’t fit the water block on the cpu it just won’t fit and I can’t tighten it

[@Anarchyy1x]

i’m confused on the 120mm white v2 edition, i have ryzen 5 5600x doing am4 and when im on the clipping to the amd bracket piece i get both sides clipped on, then when i look at it from the side the water block is nowhere near touching the cpu any help?

[@earlbond2929]

It is much better to insert the cables first to the board and arrange it then after that install the radiator on the top. 😅😅😅😅

[@NOYBidness]

Mine came with a usb for the lcd screen but it has one end for the mobo header but TWO usbs split off of it. The pump head only has one slot for one usb. What is the other usb for?

[@NOYBidness]

I just realized this isn’t the lcd version. If anyone knows, please reply!

[@NOYBidness]

I noticed at around 19:46 in the video you turned the LCD screen on the pump head. Does that swivel? I just bought the 360mm version and I’m worried I won’t be able to mount it with the LCD screen the right way up so the display reads correctly. I want to top mount like you did and I want the cooling tubes coming from the right side of the radiator like you did. If the tubes don’t reach I’ll have to flip the radiator around and I’d like to have the tubes run into the pump head on it’s right side. Ok, I know that’s a lot to unpack and I’m a novice builder. Can the LCD screen rotate and read right side up?

[@samurai96420]

Actually one she installed is the argb version of the cooler not the lcd screen, in the lcd one the water block top does not swivel and you have the lcd one and you fear that you might mount it the wrong way don't worry after installing the softaware for the cooler where you do all customizations there's an option to flip the screen the right way so even if you mount it wrong you correct it via the thermaltake software

[@NOYBidness]

@@samurai96420THANK YOU!

[@C.64]

hi

[@ThermaltakeAustralia]

Hallo

[@EuroLime]

You screwed up the fans very lamely.