Thermoplastic polyethylene dipping powder coating for protective fence with tank fluid bed

Thermoplastic polyethylene dipping powder coating for protective fence with tank fluid bed.
Thermoplastic polyethylene dipping powder coating is a type of coating that is applied to surfaces using a dipping process. It is made from thermoplastic polyethylene resin, which is melted and then cooled to form a solid powder. This powder is then heated and applied to the surface, where it melts and forms a smooth, durable coating.
The advantages of thermoplastic polyethylene dipping powder coating include excellent adhesion, high impact resistance, and good chemical resistance. It is commonly used in industries such as automotive, electronics, and appliances.
------------------------------------------------------------
Supplier of Thermoplastic Coating Powder:
www.thermoplasticcoating.com/
1.Thermoplastic powder coating
2.Fluided Bed System and Dipping Tank
If you have any inquiries or suggestions, please feel free to leave a message. We will diligently review them every day and respond promptly
-----------------------------------------------------------------------
#thermoplasticpowdercoating
#thermoplasticcoating
#powdercoatingequipment
#dippingpowder
#fluidizedbedpowdercoating

[@farues5127]

Halo

[@farues5127]

How to make a tub like this my friend

[@chinapowdercoating]

this tub is fluidized bed, under the bottom there is air blower, pecoat.com can supply this

[@karimouldtahar3228]

Is it epoxy or plastic powder?

[@chinapowdercoating]

it is thermoplastic powder, you can get from pecoat.com

[@karimouldtahar3228]

@@chinapowdercoating can I do powder coating with these fluidized beds?

[@chinapowdercoating]

@@karimouldtahar3228 yes,usually thermoplastic powder use this fluid bed dip process

[@karimouldtahar3228]

@@chinapowdercoating you mean to tell me that the bed is charged with electrostatics, like the electrostatic gun

[@chinapowdercoating]

@@karimouldtahar3228 not , the parts are preheated , the powder melt and stick and fused to the parts when dip to powder