These are the best switches and turn signals on the market.

[@albertstabelli5869]

I'm starting a new project, chopper a Honda VTX 600 and really thinking about getting the M unit! Thanks for sharing your knowledge.

[@paulhealey8221]

Yesterday I came across your channel on the 750 Honda top end rebuild which was very valuable to me so I subscribed. Now I hit gold again because I have been looking for turn signals that would not be noticeable when installed on my vintage stock 1968 XLCH Harley Sportster which never came with turn signals. Mmm 🤔 now I have to figure out how and if I can use those tiny turn signals with my stock 1968 Sportster magneto. No battery on these old Sportsters. Thanks again for your great channel. Pure wrenching gold!

[@ClassicOctane]

Thanks Paul!

[@72retrohawk94]

Kuryakyn is pronounced curry-ah-kin. They’ve been making stuff for cruiser riders for a long time. Some of it’s cool, some gawdawful. You just solved my taillight/turn signal dilemma on my current KZ650/900 build. Thank you! Edit: LOL, I just discovered they are called “Kellerman” LED lights. Wonk wonk...

[@BEVO_vs_The_World]

Those pod lights are amazing and deceptively bright when considering how small they are. Thanks for sharing, because of this video I think I’ve found my answer to lighting on my project.

[@nathanmartin6682]

A video of the tank painting process would be great to see!

[@danaowen9014]

I love the new buttons and how they work and the rear blinkers and stop lights in one.

[@Thewatson77]

Ahhh yes. I saw Dan and Jish used them on their builds as well. Great lights indeed 👍🏼 Good to see a quick update from you Taylor 🙌🏻

[@ClassicOctane]

Thanks for watching!

[@yamahondazuki95]

Who are Dan and Jish? Other cafe racer/bike building channel?

[@Rufio1975]

Awesome. I literally just got those same ones a few days ago and installed them. They are super bright.

[@dillonhayes3402]

I'm gonna have to watch this 40 times I keep getting distracted by the camaro they're my favourite

[@BKLYF]

Lever nuts are so nice since they don't slip that much as those weird screw terminals and they isolate/insulate better, can even use one of those as a common ground/common power for accessories :)

[@ClassicOctane]

I just got turned on to them and I can’t live without them now.

[@bluedestiny]

Been subscribing you from beginning, hope to see you succeed and the to go source for motorcycle knowledge.

[@ClassicOctane]

Thanks for watching!

[@MikeIrvin-e6l]

You Rock buddy! Thanks for sharing your knowledge. Could you please tell me what type of throttle control you're using with the switchs

[@johnysgarage]

Just saw this video and I get the wago being put it on but could I sugest but connectors with solder in the midle that when you heatsrink it makes the connection it would just give you a cleaner look and you could make it disappear on your custome loom

[@crushkrew]

Love the Wago's ...great vid as always....

[@crushkrew]

I use the Wago connectors with ferrules - super clean.

[@CrisanBogdan]

unless you are using a 7 point crimp tool, there is a possibility of ferrules coming down Personally I use wagos without ferrules but I use ferrules in any other place, they are just amazing

[@crushkrew]

Crisan Bogdan yes I use the right crimp tool...I love them...😂

[@scramblinman7156]

Very informative and those lights are awesome! Keep the great videos coming.

[@skullsandflames123]

The turn signal LEDs are awesome, but not for a "build to sell" bike... yet. As a builder, I love the idea. But "per one each" for the price, they're a little pricey and cut into profit. But they are definitely bright and awesome for a personal ride, if you want turn signals that are nearly invisible when not in use!

[@bradleyevan5935]

What type of mini speedometer and tack did you use on this bike and where could i buy one? Love the videos! You’re a life saver!

[@jDogg7894]

Any idea when a video on your process for painting a tank will be out?

[@drew657]

Awesome! I've been looking for a great set of signals to replace the ones on my bikes. I put on cheap Amazon LED ones and you can hardly see them when they light up. Even better that you can pick them up at Revival.

[@grosbeakmc]

Very nice wiring update. Love the signals!

[@TheAjs71]

Great looking indicators, but after seeing how much they cost including shipping in AUD, think I'll keep the ones I've got...appreciate the update Taylor

[@geoffb64]

Try an Aussie company called Purpose built Moto. Trust me, as good if not better, around $A100

[@oddis188]

Wagos are great. Especially the "new" rat trap models

[@CbrMikey]

When running the ground wire to the headlight bucket did you tie it into the coils then break off from there. Then you use a smaller gauge wire from the coils to the bucket so it will go into wagu connector? Is this accurate?

[@mattiaspettersson3611]

Love your videos! Keep up the Good work!

[@garypowell4875]

Taylor, so glad I found your videos. I’m really enjoying following your progress and learning what I need to do to get my 73 cb500 back on the road after 30 years in storage. I’ve been told the carb rebuild kits sold today do not have period correct or OE matched parts, particularly the o rings. Where do you get the parts you used to rebuild the carbs on your cb500s?

[@gerrymoore7050]

enjoyed your thought process

[@kevinmccreary3123]

Nice clean look. Anyone know if you have multiple bikes with munit. Can you have both bikes on app?

[@ClassicOctane]

You can have up to 10 bikes paired if I’m not mistaken.

[@davidgearardo1788]

Damnnnmnn! I freaking luv this channel

[@Steve765]

This electronic wizardry is so cool, I don't think it's available here in the UK yet though.

[@ClassicOctane]

Motogadget is a German company so I would be surprised if they are not sold in the UK.

[@alstone5257]

@@ClassicOctane it is sold word wide

[@TheBaaHA]

I wonder if you ever have issues with the regulator rectifier overheating inside the battery box.

[@henryhartley9993]

Motone are well known here in the UK for quality products...

[@maickelvanrossum8098]

Great videos! I am building my own caferacer from a GL500. Thanks for the brilliant ideas on different parts and knowhow. I really like the speedo and rpm unit you are using here. They are very old skool and clean looking. What brand and type are they? Please let me know!

[@leachim69420]

does anyone have a updated link for the blinkers

[@dancooper4016]

Another awesome build. Quick question, I don't recall seeing you do custom throttle/brake/clutch cables. Do you have a video out there on those or has it not yet been a area you've explored on the builds?

[@jeffroyston501]

Would those switches work on a vintage without the m unit?

[@rsrokzme]

I know the video is a bit old now, but did you use the stock ECU/ECM and TSSM? Were you able to bypass/remove the TSSM to make the munit work? New to electronics and will be trying to get this to work, not completely sure yet how to wire up the stock ECU.

[@dillkillful]

Where did you get that speedometer

[@StellsBellz]

Amazing. I have to ask where did ya get the speedo and tach. I need them ASAP. Replace my crappy looking ones on my CB650 custom.

[@ic9046]

Hey Taylor, I'm fixing up an old Suzuki I got for a great deal it does not have a front break switch. I was wondering if you have a particular fix for that or if you just use one of the banjo bolt replacements with the pressure switch in it. Thanks!

[@90blacknight]

Now if you can tell us where to get quality pilot jets! I’ve had no luck with aftermarket brass.

[@LividAxis]

jetsrus

[@paulturko8116]

Hey Taylor, what front brake switch / brake assembly are you using on this build?

[@Reedith]

what turn signals are they the link is broken

[@josephabramo2324]

Are the switches you installed momentary or toggle?

[@DrewBloo]

You should make and sell the fabricated tray with the components and battery all mounted plus a harness, you’d sell hundreds.

[@vkrishna0612]

The motone headlight switch, do we need something additional for the headlight on,off, flash,high beam? Or is it just a easy swap with the factory switches ???

[@foxy1067]

What is the brand name of the snap wire connectors you use?

[@stevedotworld]

Can you use the M Unit on the 78 CB400A Hondamatic? I'm asking because of the two-stage timing advance as it switches the CDI to the different timing settings based on what gear you are in.

[@gr8reels]

Would using the M Button have cleaned up all that wiring in the headlight? Thanks for the great Vids!!

[@stavropulos]

Love your channel. Where am I able to purchase the under seat tray for the electronics? Thank you 🙏🏼

[@kwhitney6238]

I love you chanel Taylor been watching since you started I guess as a hobby now it's a full blown business just awesome. I'd like to see some bigger cc projects I got a 81 cb900 custom I know most the knowledge applies to my bike but my transmission is a "10" speed kind of a strange bike honda built.

[@James_Sovereign]

Okay, I'll say it ... huh?

[@kwhitney6238]

What I've seen him build is mostly 550, one or two 750 and the triumph. I'd like to see a video of him doing something a little bigger.

[@transplantedhillbilly6549]

Does it have a high and low range?

[@kwhitney6238]

Yes, has two foot control on left . Supposedly a goldwing 1100 transmission

[@MrmausmaMC]

Can you draw up a wiring diagram

[@MrmausmaMC]

What is that throttle

[@roderickmoyer9851]

Hey nice work as always, is the motor powder coated or painted it looks nice....

[@sghettibaby]

hi, i have a cb350 and i was wondering if that front brake lever with the brake switch would work for a cb350? mine currently doesn’t have a harness that came with it from the previous owner. do you have a suggestion of a front brake lever/master cylinder with a brake switch?

[@YTjndallas]

What is an “M-Unit?”

[@NS-yl6wj]

Hey, what the scoop with the boxer??

[@bobchavez8627]

Taylor, love your videos, especially since you specialize in vintage Japanese bikes. I'm curious, is there a provision on your wiring set-up for illumination of the license plate? By the way, I'm currently restoring my 1964 Honda 305 Dream that I bought new ($568.00 out the door).

[@JaybirdMcD27]

Are you in Austin?

[@redkite3317]

Great videos...What brand gauges are you using..

[@fishaussie9112]

Used to be great to watch when restoring Honda’s Becoming now as a tutorial lessons What has happened to the triumph Frankenstein Steve from down under

[@MicJaguar]

If only I could get my cb550 looking that good. 😢😫

[@Hoggdoc1946]

Company for led lights is called " Kury-aw-kin".

[@frankmorris2603]

Was thinking the same. He massacred that pronunciation. 😂

[@zagrod333]

I think he mistook it with Kellerman, because this is the name of the other company that also makes tiny led lights.

[@ClassicOctane]

Kellermann is the manufacturer Kuryakyn is the model.

[@WilliamBay]

Kuryakyn is the USA brand/distributor that carries the German Kellermann products. Atto is the model. About to pull the trigger on a pair of Bullets. Attos are too small for my liking.

[@frankmorris2603]

@@WilliamBay True. That's my understanding. I've bought Kuryakyn products.

[@estgassantana9068]

GOOD JOB I LIKE HOU STILE

[@AridersLifeYT]

i love me some CNC parts

[@WilliamBay]

Kill switches should be red, and very clear in how to shut off power to the bike. If I came up to a crash and had to turn off that bike, the key barrel would need to be exposed, or I wouldn’t be able to shut it down due to a Nintendo cheat code on an unlabeled button.

[@pugbuguk327]

Are the rear indicators clear when the tail/stop lights are on ?

[@ClassicOctane]

Not sure what you mean by clear. There are dim red for tail, bright red for brake, and amber for turn.

[@pugbuguk327]

Classic Octane Sorry, I meant the amber light not being masked by the red tail light. (Can you clearly see the amber flashing when red is also on) Thanks for reply 👍

[@daveco1270]

Are you going to show us that bike when it's done...with the tank and seat on it?

[@ClassicOctane]

Yes, I will make an overview video on it once it’s done.

[@lowkeyrevin8470]

the turn light signal kinda expensive. Maybe 60 bucks per 1 piece.

[@mohammedmidlaj4623]

Nice👌👌👍

[@1badombre82]

God dangit everyone keeps talking about these lights but they are not available anymore

[@johnk815]

It’s hard to believe those tiny blinkers are suitable for daytime use.

[@somerandomguy3868]

Yeah there bright but just not big enough, not very safe

[@MrKdr500]

Forks need re-chroming.....bit of a downer.

[@michaelhoersch6626]

Your choice of turn signal/tail lights/brake lights is once again disappointing. For true safety, they need to be larger so that they are much more noticeable. Having been previously rear ended on my bike, safety is very important to me. Just because they are functional does not make them safe. I would never use these on any bike that I ride.