These Axles Should Have Come Standard! SCX10 Pro PRO45 Portal Axle Conversion Kit

[@CapeCrawlers]

Scx10 iii brass portal covers will fit! Timestamps First look at the axles: 0:31 On the build: 2:28 Rock crawling: 5:34 Final thoughts: 13:38

[@jimbo4203]

They look good and performs great 😊

[@Thatspeed07]

Did the same to mine now I got a crazy build with the straight axles with 2.2 wheels that I have left over

[@Rc_Alex_76]

Are you going to build something with the straight axles you took off that'd be cool

[@OGRadGrow]

Nice review and awesome driving skills 👍🏾🔥

[@DOWNUNDERRCS]

Awesome video 😎 .good stuff 👍

[@RiceCrisp320]

Can you flip the pinion in either set of axles to make a mullet build?

[@markcole6475]

I love the way the portal axles perform on my pro….but my only issue is the spur gear hits the left upper link on extreme articulation… Kind of fixed it with a smaller spur gear …but still rubs at times.

[@NovemberFoxtrotRC]

If you fully droop the out on straight axle with the 60t spur it does the same thing. Definitely an oversight during design.

[@Bradon881]

Is is ok to only change the rear axle?

[@Modellbau-Kanal]

Hi Cape can you me any POrtal Axles say which is with tires only 19,5cm wide because our Gates in the truck trial cours aure only 24cm wide. I habe actually shorter AR44 Axial Axles unter my truck and will change to Portal Axle but so that the wide goes not over 19,5cm o 20.50cm. Have you a good adresses for order shorter make Axle for my scx10 II? Greetz Andy

[@Skylarkman]

Can you show how the front uppler links mount on the axle with the 4 link setup. I bought these for my kids rig and cant figure that out to save my life.

[@MrJasonk18]

Did you figure it out I just got these today and have had the entire axles off but can’t get axle tube off on either end

[@Skylarkman]

@MrJasonk18 there's set screws by the center section that have to come out to remove the tube.

[@MrJasonk18]

@@Skylarkman yeah I took the two set screws out of the diff cover itself one on each side and I still didn’t feel like it wanted to come out. I didn’t want to break it their brand new. I’ll try again when I get home from work.

[@Skylarkman]

@@MrJasonk18 of I remember correctly, remove the knuckles, take the set screws out by the diff (2 each side) and then a good tug pulled them out.

[@NovemberFoxtrotRC]

Does anyone know what steering link will fit these properly? I don’t like the fact that there’s so much thread showing on the link ends. I need something slightly wider than the stock link. Kind of wish axial included a new link with the axles.

[@elijahtoledo317]

Where can I get that amazing side hill table from

[@CapeCrawlers]

Crawler park

[@D.TH.87]

Can i switch the portal axles from my Axial Base Camp with my Scx10 Pro straight axles? I dont wanna buy them twice. 😄

[@CapeCrawlers]

Yes you can.

[@MrJasonk18]

How did you get the panhard mount off the axle

[@CapeCrawlers]

The pro axles have the option for a SOA setup. I did that conversion on these.

[@gary2888]

Would these fit SCX10 III?

[@CapeCrawlers]

With some tweaking I think so. I saw Matt at SBG put pro axles on his SCX10 CJ7. If the straight axles from the pro will fit, I imagine these will too.

[@ColeRoberts-qt7if]

Hi

[@DadsRCGaragePNW]

You say you lost weight but that only due to the fact you’re not running the same brass. Stock for stock the portals should be heavier