These SIM RACING PEDALS are hard to ❤️ CAMMUS LC100 (V2) Pedals [REVIEW]

[@SimRacingCorner]

*Thanks for watching! Other related videos you may enjoy!* ▶ Cammus LC100 (V2) Pedals [UNBOXING] kzbin.info/www/bejne/farFdGVpl7CGr68 ▶ SIMSONN Pro Pedals [REVIEW] kzbin.info/www/bejne/kIG4p4mHlNakZsk ▶ SIM JACK Pro Pedals [REVIEW] kzbin.info/www/bejne/rJjGqXqqZ92Xbac

[@RaM-xy8kg]

absolutely brilliant and thorough review(er) as always. you should have 10x the subs. keep up the good work. plenty of youtube reviews of ultra expensive stuff but you were able to find the real value like the simsonn or that ae h-shifter. i just got (on their way) a set of simruitos for dirt cheap on an aliexpress deal, hope they are as good as the simsonn

[@BrokenanklesFPV]

i have the LC100's, I used them for about 3 weeks. was really enjoying them after i finally got them to where they felt goos to me . then one day in the middle of a race the brake just stopped working going into a corner. then the brake came right back then stopped working. I went to the software an was holding the brake down an the bar was going up an down up an down, while im holding the brake down .i would recalibrate them they would work fine then next race same thing. I contacted them an their fix was to keep clicking the max set an min set buttons till the problem went away. I laughed my ass off at their fix ordered the Heusinkveld sprint pedals haven't had single pedal problem since . their budget stuff has potential just need some things sorted out C5 padals are a week spot for sure

[@Cranky-Panda]

I had a similar issue, I found the ball bearing on the loadcell was pressing to tight up against the pressure plate. When i screwed it back (so it would barely touch) the issue was resolved. No more flickering during calibation.

[@SupportNoob]

With shipping these where $300+ while the simsonn was $190 No brainer wow, wanted to complement my C5 but went with the simsonn

[@yamyam60]

There seems to be some amount of stiction in the brake damper which would result in inconstancy. I would have totally removed the damper and tried without it.

[@alexasigno]

Thanks for comparing them to the sim jacks, something all of the big reviewers pretend don’t exist.

[@TechTalkReview]

I bought these pedals a few days ago and my initial impression was that the brake pedal travel was very short to the point that it felt strange. Is the travel distance adjustable? Now I don't have much time to play with them (or watch your full review now). Thanks so much!

[@jordanguenther4931]

I believe the boosted media video of the lc100 pedals discusses this and provides a solution

[@SimRacingCorner]

The collar can be turned to alter the travel of the spring section.

[@gdarazi]

noticed @13:53 that the clutch stoppers are smaller than the ones on the throttle. Did u try swapping and mix matching instead of using washers?

[@SimRacingCorner]

I didn't. Once I had the throttle sorted out with the washers, I left it alone and moved onto the clutch.

[@WromWrom]

Didn't you have any problems attaching the pedals to the plate? I know I do and have bought longer bolts so the pedals don't de-attach themselves from the plate...

[@SimRacingCorner]

Amongst all the other issues I found, that wasn't one of them.

[@WromWrom]

@@SimRacingCorner Interesting. We've had different experiences with those then - the bolts for the plates are too short for what I need them to be so this is another point where the experiences diverge... 🙂

[@SimRacingCorner]

Otherwise, how are you getting on with them?

[@WromWrom]

@@SimRacingCorner Let's say I rather will continue using my regular ImSims...

[@SimRacingCorner]

@@WromWrom 😂

[@marcviller2060]

The clutch is a sexy time bed simulator