First Year Apprentice? Get These Tools!

[@benbenavente1032]

Bravo Brother. I'm a first year apprentice in California and the firm I work for literally has us working with everything from transits, Lazers, all the battery operated tools, beam saws, running all terrain forklifts, manlifts, boomlifts, skip loaders, ect. I think we're, "thrown to the WOLVES". Because there is a huge shortage of young blood in the industry. It's great that Leadership See's the value in young apprentice's, " Rising to the Occasion". Nothing but RESPECT and Admiration for you Sir. Best Regards Benny J 1st year apprentice Local Union 46

[@murraycrichton2001]

In the UK as an apprentice you need to master the art of tea making.

[@davidbrewer7937]

The apprentice has to learn how to make "government tea"....also works as drain cleaner, wasp killer, road sealing tar, ship hull water-proofer, damp proof course & tire repair contact cement. The teapot needs to be big, aluminium with two handles & at least 1/2" of tannin build up on the inside. The pour spout has so much tannin that the 3 gallons of tea pours out with a dribble the width of a match stick...Government tea!....later after drinking this bio-tar, you will need "government bog roll" for the thunder-box...preferably Bronco paper which also works as tracing paper, smooth, shiny & rasps your bum in use.

[@jxckc351]

when I was an apprentice as a tech, I was asked on my first day to make tea. 'I don't know how to make tea', never made a tea since

[@premmagar9265]

Lmao

[@TheFrostcave]

That's how aweful builders come along. Teach them something or give them the guidance to go do something els.

[@Ash_Marshall]

and finding that tartan coloured paint.

[@christophercrowle9753]

Your guys comments on useing hand tools only is correct. First years of my apprenticeship I cut everything by hand even ply and also handing doors was all done with hand planes and chisels. Haveing worked in nz granted for only 3 years I found that when the power went off, for whatever reason no one could cut square with a handsaw majority of guys even struggled to nail by hand. I do believe learning the basics doing things by hand is crucial before useing electric. Keep up the good work bro.

[@locominyana8916]

That's why they invented generators. Otherwise see ya 2mrw lol.

[@woodworkerroyer8497]

Where did they not let you use power tools? I understand what you mean, but in my area of California RAIN stops our crews and the hint of wind shuts down the power grid! But yeah, knowing how to use hand tools is nice.

[@717UT]

This notion seemed crazy to me (USA cowboy here) but I can really appreciate the idea of understanding the core fundamentals of the hand tools and appreciating the hard work that goes I to craftsmanship. But in the States, unfortunately a lot of craftsmanship is being lost. I really feel there is a stigma against people who go the extra mile and maybe take some extra time making their carpentry exceptional. It's a lot of wham bam gett'er done here in the Midwest.

[@natejm]

That’s a great intro for young lads and lasses getting into the trade. A big seller on KZbin over here in North America has been quality videos on tips, tricks, do’s, don’ts, instructions on how to use each of these tools. I know they have greatly accelerated my learning, and are a great way to pull more viewers into your channel. Plus you may have tricks that old dogs may not have, or other old dogs may have input into ideas you may not have. The beauty of this platform is the ability to share, so thank you for sharing. Cheers

[@BobBlarneystone]

An extra battery for the tools is always useful. A sheath for the pullsaw is a must. A digital level module several beam lengths can be handy too. A portable workbench, a No.4 bench plane and/or block plane are nice add-ons for finish work.

[@pcatful]

You also get more control on the pull. So even with a push saw the beginning of a cut is make with a pull.

[@dinglebay100]

Great series of videos, your guy is right, the first year of my apprenticeship here in the UK it was hand tools only, built a quarter turn closed string staircase with two other guys with hand tools only. It really helps to hone your cutting skills before you step up to power tool use. Keep the videos rolling, after 30yrs I'm still learning new things! Thanks for sharing.

[@liiich6175]

Also a reciprocal saw is very handy to have I would suggest Makita or Milwaukee brushless tool set. Stabila level will last over 10 years I know mine has.

[@pauledwards9493]

DeWalt flexvot one is a beast!

[@wb5mgr]

We have paslode guns here in the US, I've had one for almost 20 years but they are much more prone to break down under hard production use in my experience than a standard pneumatic nailer which is why large US crews still use them. I see pawn shops here chock full of worn out paslode gas guns, but never any hitachi or bostich pneumatic guns.

[@christianscustoms6429]

The Paslode guns are super loud too. I get that most people in construction don't care about loud noises but I think using a pasloade as your main gun would be pretty detrimental to your hearing.

[@blackwoodBoyzfishing]

Interesting to see that a first year is expected to run a cordless nail gun or nail gun in general in NZ. Over here in aus they only really expect you to have a power saw, tool belt, basic hand tools and power tool combos (drills etc)

[@covcarpenter9158]

Thank god someone with a youtube channel has done this. Its seems there isnt much on youtube for the younger chaps. Iv been a chippie for 12 years now and i get asked time and time again buy first years what they should buy and get and do. You should do a series of videos on this topic because there aint much around.

[@Peter-os7nk]

Im starting my apprenticeship next month and I found this hilarious. Apologies to the seasoned because after I passed my test i was literally outside the front door asking veteran workers what tools to get, compared which tools they named the most and wrote down a shopping list. I apologize on behalf of all newbies but it seems that the only con is noone really tells you what you need to get on your own vs what the company will generally lend you.

[@russalbright4213]

It is so cool to see how you guys go about building a half a world away. Love your videos! Keep up the great work!

[@david94839]

Informative vid for young bucks starting out. My first year of apprenticeship, we didn’t use any electric tools at all. Only hand tools. Gets hand eye coordination off to a good start, and muscle memory. Anyways, keep the vids coming dude!! 😁👍 Greetings from Belfast, Northern Ireland

[@kanghoeon]

most of this type's workers don't post like in this youtube contents or any other website. you're a very special guy I've ever seen it before you seem like very proud to you're working on it

[@simonjessopp1517]

Sound advice. Many builders here in the UK have a young workers policy that means up to 18 and you cant use powered tools. Many for safety reasons, but it also forces them to get good with a hammer and handsaw. I would agree with just about all your choices. Good video man.

[@GeeSPRINGFIELD]

Interesting video. In the UK, at college you're taught to do everything the old way, chisels and a panel saw etc. Not like that on site though! All nail gun, battery saw and a good hammer for thrashing everything else!

[@TheHonestCarpenter]

Hey Scott, we've got the exact same Occidental belt rig! I went through three tool belts before I found the setup that worked. When I was a kid we wore leather aprons, but I never got used to them. Give me a harness any day. I love the channel!

[@qqq-nj1mw]

This guy and Scott Brown are some of the most down to earth carpentry channels out there

[@BelzoGraphics]

I have gotten most of the tools so far, paslode nailer and Hilti drill next is a Hilti impactor and circular saw and a diamond back belt and few hand tools etc

[@louiszullo8300]

This video was really useful, I left a comment on your tool giveaway video saying that I started my apprenticeship last week, well now we are in week 2 and I’m loving it. The only thing is I keep having to ask people to borrow there tools, I was looking at buying some stuff but wasn’t sure what the essentials where, so this video has really helped. Big love from the UK

[@strayedarticle7666]

If you're just starting out I recommend buying a skill saw,speed square tape measure.Then get a bunch of yellow and white pine 2x4s.On yellow pine learn and practice beveled hip/valley cuts long to short,practice ripping and square cuts by the billions.Next get some plywood,learn to scribe with tape and pencil,then do a ton of rips on that.Learn the terminology and how it applies to being a cut man.That will be a good place to start and earn your keep on most job sites,at least it did for me when I started.

[@ScottOxf]

First year apprentice here, I've got most of these and saving for the skill saw now. The place I work for has everything i'd need to use but I rather have my own so I can look after and maintain them myself would love to hear what you'd reccomend next. Although we do mainly kitchen/bathroom renos we dont tend to use nail guns all the often. Love the content!

[@dannym670]

If you're doing a lot of kitchen and bathroom refits I'd suggest a track saw and table saw, they are worth their weight in gold for that type of work 👍

[@dahpizzaboy6149]

Right there with ya, I agree that having your own is much better. If you are doing Reno’s I suggest recip saw and sawzall

[@ScottOxf]

@@dahpizzaboy6149 Recip makes such a difference!

[@enjay8950]

@@dahpizzaboy6149 i thought a recip and sawzall were the same thing?

[@dahpizzaboy6149]

@@enjay8950 they do, I’m a moron and clearly new! I meant recip/sawzall and a oscillator

[@Lnstrq]

Love your videos. Also wanted to say the views of Auckland and the surrounding areas add a lot to the quality somehow. Binge watching now. Thank you!

[@OhhRisen]

Yeah here in Australia us apprentices usually don’t need any tools because the boss man provides but when you’re 2nd-4th year thatsbwhen you start building up your collection for when you’re going to jobs by yourself

[@Fetecheney]

Man, you didn't mention your beautiful Occidentals! I have the same set as you. Bought mine about 2 months into when I started 6 years ago. And it's one of the most worthwhile purchases to have good bags

[@mdavid7149]

Even less than that now it's crazy.... I've only been a contractor for about 4 years and the technology has not changed so much that this is still relevant and pertinent as if you posted this yesterday

[@hornetIIkite3]

Replacement bubbles for the spirit level. Nails for fastening glass. A copper magnet. And a pair of oil sciccors

[@Paftastic]

Often overlooked but absolutely necessary is good hearing and dust protection. I wish that in my early days in carpentry those things were mandatory. Now I suffer hearing loss (caused by my stupidity). Carpenters just starting out, don’t be stupid like I was, wear hearing protection and a dust mask.

[@sessionbox4256]

I'm going to do whatever it takes to become a carpenter. Doing a year in interior door fitting, framing and architraving. Then going to germany to do a month internship in a joinery workshop. I'm hoping this experience will make me stick out enough to get picked up by a carpenter. Have my own Pro drill, pro skill saw and pro jigsaw. Hammers, chisels... most important thing above all is safety keeping fingers well clear of blades

[@JohnDoe-vv1ms]

so my apprenticeship was in the union over here in the states, day one all you need is a tool belt and basic hand tools. screw driver, hammer, punch, some clamps and so on. but all power tools and battery tools are actually on the job in the gang boxes so if you wanted (not the best idea but you could) you never needed to buy any for work. basically all impact guns, drills, any air or gas guns they were all provided by what ever company you were with and they would follow the foreman from job to job. also the apprentice program gave you 2 sets of hand tools, one set after a few months and another at the end of your first year. it was a pretty amazing set of tools, i gotta say for all its worth the Carpenters union in new york city treated me well for the years i was there before i had to move.

[@Makoonga]

I was so pleased to see that you use pilot holes. I've been doing this crap for 50 years and started using pilot holes from day one. It's common sense. Not always necessary but usually.

[@Patrick-857]

Some idiots here in NZ use gun nails to lay decking, or don't drill pilot holes. I would not use nails for decking at all if it were up to me.

[@bigjohnnyboots2802]

Am a joiner in the north of Ireland and when I started out I just had my 2 hands then I got a tape and hammer with my first weeks pay. And I have been building on tools from then. 30 years later and I still don't have a nailgun...

[@bobkraft4364]

Safety on the job in the states is like the least stressed thing. I love how you guys are so meticulous and clean about your work. Do you think a carpenter from the states would be able to transition to working in New Zealand or Europe? Metrics being the main thing

[@MrPennys12345]

If you can use the metric system you should be fine

[@audibleadventures9004]

I'm from uk and I only used imperial for some reason but now in my apprenticeship I got used to metric in about a week or two just read the tape a certain way, like if it's on 52 cm and a random mark just say 5, 2, 3 (for example) = 523 mm. Everything's in mm on site

[@theunambiguous]

Love the vids👍🏽 2 videos I'd love to see you make, 1 how to you get and quote your jobs, 2 do you and Paerau ever argue or have a disagreement on a job?

[@shawnbowen6789]

hey bud you forgot to mention the board stretcher they are super handy for green horns also a knot puller is super handy

[@alexsparks2498]

Definitely keen to see the follow up Scott love ur videos learning just as much here as I am at work so thanks

[@keeganmax922]

Do a full van tool run through!

[@smokingcheeba420]

And what tools you want to have.

[@scottduncan2190]

Yes we use pneumatic nail guns because code requires to shoot 3 and 1/2" common Nails which don't fit in cordless nail guns here in the US also when framing houses we do a lot of structural plywood with 4 + 12 or 3 and 6 nail pattern so cordless nail gun wouldn't be able to keep up. just thought I'd let you know why thanks for a great video

[@fanaticz666]

I use pneumatic for structural plywood in NZ as well. Only use gas powered when framing or doing finishings.

[@scotland2256]

Sounds like a gap in the market there

[@JuiceBanger1]

The 2nd drill we call an impact driver, not a drill

[@tracynshea1333]

JuiceBanger1 Thank you 🙏 I was just about to let him know that!

[@Patrick-857]

I have 2 impact drivers. Just because.

[@lntelnz9126]

I’m sure he’s very aware of that.

[@ryanfu2117]

Shut up bitch

[@woodworkerroyer8497]

@@ryanfu2117 There should be a comma (this thing ,) between the p and b in your last sentence. Also, fool is spelled with ool, not a u

[@begley09]

Always interesting hearing the different experiences first years have. My first year with UBC, as a Formwork carpenter, I got destroyed. I was treated as If I should have known what journeyman known or very close to that level. Which yes, was very frustrating but it made me want to learn that much more and at a faster pace. Still have a ton to learn but reflecting on it now, I like that I was expected to do more then just push a broom around. Some things I was taught was how to use a worm drive saw and how to cut 4x4’s in one go, how to lay out walls for the forms. Overall, just made me a better carpenter.

[@miloraca]

I live in Australia, stick framers still use pneumatic nail guns,much more reliable and cheaper to run than gas nailers,prefabricated framework, you can get away with the paslode gasser,I have done both in the last 20yrs

[@davidbrewer7937]

Yes I agree...by the time you have framed a whole house around 2500 sq-ft you might have driven a couple of thousand 4-1/2" R-dox framing nails....

[@MrTriaon]

I started my apprenticeship in January and got tools from the company, mostly hand tools and levels. But sadly I got into a big work accident and can't work for the next 6 months, which really bumped me out. I enjoy watching your videos and the work you do when I can't be, Keep up the good work!!

[@ScottBrownCarpentry]

Get well soon bro

[@ANGELinDiSGUiSE1991]

Prayers brother 🙏🏼🔨💥

[@laurencewest1996]

Love the vids mate. Would love to see another one on next tools to get. I’m a third year apprentice from aus. Cheers!

[@Goabnb94]

What your camera man said is so relevant. I see a small number of builders who seem to think their job is to operate a nail gun. No thought into why they are using it, or for what purpose, or for the finished product, just as long as they fire x number of nails all over the place. The same type of people who go "not my job" as well, as though they need to have sweeping listed in their job description before they handle a broom. If you took away their gun and gave them a hammer, maybe they'd be a bit more attentive to what they are doing.

[@tritonbuildingserviceslimt2480]

Hi Guy's In the UK apprentice are not insured to use power tools until they are 18 years old . All hand tools for the first two years. Keep up the good work

[@georgeb.wolffsohn30]

So it's about money, not safety. That's business for you.

[@charlesreynolds5323]

not sure what they call them outside of the states, but a stiff putty knife is great for a wedge if you get into a pinch. also a set of cheapish chisels with striking plates on them are great too.

[@BrandonGrantSplash]

you forgot the most important tool a 2H Pencil

[@hughbugger]

Measuring tape also

[@fanaticz666]

All included in his hand tools

[@seanrichardson6311]

My first year I bought circular saw , impact , combo drill , multi tools (all dewalt tstak) spent quiet abit so far but worth all all my main power tools in 2 small boxes

[@NovaMains]

Please do a video on all of the tools you have ! :)

[@timm2349]

3:20 thaths right here in germany when you start as an trainee you mostly work with handtools for the first year.

[@keeganawilson5864]

I’m an apprentice carpenter in the uk and I’m not allowed to use power tools until I’m 18 so I’m getting really good at sweeping up.

[@tracynshea1333]

The Johnson Level works just as well as a Stabila for an apprentices and I’ve never seen a 350 dollar Vaughan hammer. I own an Estwing, 2 Vaughan’s and 2 Milwaukee and they do just as well as a 350 Stiletto

[@Patrick-857]

I love my 14 OZ DeWalt hammer. It's not the most expensive hammer available, but it's the most comfortable I've ever used. All my workmates think Estwing is the only hammer to have, but I've never liked them. They give me grief over it, tell me I'm using a framer, but I disagree, I've never used a hammer that hits so hard, with so little effort. I almost never miss or bend nails with it, and unlike the Estwings, If I'm nailing off decking or cladding, it doesn't leave any marks if I slip or over drive a nail. But whatever, people can use what they want, I'm just sick of being criticized for using what works best for me.

[@jessicaneal8553]

I'd love a comparison video on multitools - we're doing some renovating on our 1910 house and need to remove some grout to re-point some bricks!

[@michaelstringer7066]

I dont work in framing, but for a two month period every year, we use nail guns. My first year at work the nail gun at work had what I believe is called a sky hook. And at that time I didnt know what it was. I though it was only used to hang the gun on my tool belt

[@lamdog24]

I want that hammer but can't find a way of getting it in Australia and the replacement handles!

[@bellea3028]

This is awesome! More on first year apprentices and getting started out would be lovely. Also if you have tips for women entering the trade and things you wish you knew from day one (like the ear protection) that would be much appreciated!

[@kimi1510]

Are you in trade?

[@MsElijah16]

Rain coat

[@montanawhite5699]

Idk about apprenticeships, but here in Hawaii in college for carpentry first half of the first year is all hand tools, handsaws, hammers chisels. Second half they teach you how to use all power tools except nail guns. We never used impact drivers tho, always nails. Second year we had to frame up a practice house with all hammer and nail, for our final we built a actual house for people to live in. Again no screws and no nail guns, just hammer and nails. I miss using my hammer to sink in some 16p nails. All I use at my current maintenance job is screws. I had screwing, I’d rather use a hammer, funner and faster. But screws are way easier to take out if you need to take something apart.

[@martinstrath791]

Interesting to see how diffrent countries are when it comes to tools and other things used in work. Here in sweden all companies must provide us with all the tools and workcloths for free.

[@DrIngo1980]

Great video, as always. Love it. I have to wonder though that apprentices in NZ have to BUY the necessary tools before/on day 1. This concept is foreign to me. I would have expected that the company you do the apprenticeship at will lend you the tools for the duration of the apprenticeship and you can decide on your own when and what to buy. Frankly, it would have been really strange and odd if my apprenticeship company would have asked me to buy my own computer (apprenticeship as Fachinformatiker [IT specialist] in Germany back in 2000) and all software licenses to do my job as their apprentice. That literally would have cost me several thousands of $$$/€€€ even back then. Unthinkable. And I highly doubt any other blue or white collar job with apprenticeships in Germany requires this - but I could be wrong. I don't know everything 😄 Anyway, keep up the awesome content. Loving it! Greetings from Japan.

[@welshman100]

After 10 years as a carpenter, sometimes I wish I had got into plastering instead... the sheer amount of tools I have.

[@carpentryfirst3048]

I feel like everyday I have to buy some new tool. I'm outfitted like I'm my own company but I don't get paid for it. I'm jealous of painters and window cockers. The overhead these guys have in tools is less than my chalk line cost yet they make like a buck or two less an hour. Even labourers need just a knife and a hammer and make 2$ less or something like that. Doesn't make sense.

[@thomaswebby2431]

@@carpentryfirst3048 if a labourer is only making 2$less than you maybe find a new job

[@carpentryfirst3048]

@@thomaswebby2431 so apparently you don't know anything about unions. Union labourers make what they make. The unions suck but it doubles my wage and gives me 10% vacation pay, benefits and pension. None union carpentry is chump work. Make 25-30$ to frame a house? What a joke. Let the guys who love to drink and pop perks have that fun.

[@TheDuddleyCo]

Just remember a lot of the tools you have as a carpenter are the same tools they keep at home. I know diyers and non carpenter tradesmen with almost as much tools as most builders because they do so many renos in their spare time.

[@henri6595]

@@TheDuddleyCo I'm one of those DIYers with an expressive Milwaukee M18 collection. I even got the M18 nail guns: 15, 16, and 18. I do about 2-3 projects on the house every summer and 1-2 during the winter. I love not having to hire a Contractor for anything! The tool obsession does get out of hand at times considering I'm not a professional but have the tools and most of the knowledge gained through the internet.

[@JamieVauxnut1]

As a first year apprentice in Scotland back in 2002 i earned £99 per week . Got all my hand tools from the company i worked for , smoothing plane , hammer, saw , tape , level , tool belt , tool bag , block plane , chisel set , stanley knife , nail punch and i think that was it ... maybe missed a few . Bought myself a 14.4v dewalt drill and 2 batteries , but never used any other power tools till second year and that was just a go of my trades mans paslode , collated screwgun etc . Never actually bought and used my own till 3rd year . Skills test in scotland at the end of 4th year demands the use of hand tools only , well it did in 2006 . Great video but it is a big ask for a 1st year to purchase all of that

[@godspeedjnr3068]

jamie fullerton going into my third year as a apprentice, and my boss would supply all the power tools, for me to use onsite, but ur right, learning how to keep chisels sharp, how to use ur fold out rules, learning to hammer with posts bolts and good knows what in the way trying to drive a nail in some good awful angle, realising you have lost the scribing pin out ur combination square a year later(lol), are all important skills to master.

[@MrBraden17]

Great vid. Definitely depends on the company you work for. My brother was essentially a brickies labourer for his first 2 years of his apprenticeship. I was lucky enough to be on the tools from day 1.

[@astr0gaming801]

I’m fortunate enough here in Canada you just need your hand tools and nail bag as an apprentice they provide power tools thankfully cause batteries be expensive

[@conmanumber1]

All my tools were purchased at auctions in Queenstown after building / construction companies folded. I purchased Topcon dumpy levels for 70 bucks and lasers for 300 then send away for recalibration which still does the work. In 2008 I bidded and won a auction to 2 large pallets of Stanley 12 metre steel tapes, Speed squares etc in New York as a tool supplier to the 9-11 licensed contractors had finished their contract (never doing that again as it took years to sell it all). All my hand tools were purchased on 70 percent off specials from Placemakers etc, all my Atlas Copco diesel trailer compressors, gensets and jack hammers are from auctions. Being Chinese I really hate wasting money hence I'd rather wait for deals to present themselves. Mates desperately wanting money is another good source of gear.

[@chillpill7446]

Tape measure .speed square .sharp handsaw .4foot level. And 2h pencils.master those first before you buy power tools

[@michael.schuler]

Add to 1st year essentials: Chalk Line.

[@locominyana8916]

@Badger0fDeath you've never pinged a chalk line.....you can't be serious.

[@davidbrewer7937]

@Badger0fDeath Ideally you need both. Chalk line helps if you need to mark more than one line at a time.

[@doccjohnson]

Stabilla levels are the best . its what we use in Canada. I use one. There not cheep. As for a hammer. Sorry but i only use a steletto 15oz titanium hammer. The only hammer to use in my opinion. Worth every penny.

[@IamNemoN01]

Flat bar. Plumb bob. Jack plane. A set of at least three chisels, the widest being an inch or wider. A dead blow hammer, or a single handed 3 to 5 pound sledge. You need a shorter level for doors and window - somewhere between 2ft and 30 inches will do in most [cases], no pun intended. You should have a big fat wad of pencils sharpened and ready to go. A chalk line. Unless you’re only building small additions and decks, and stuff like that, you should have a 50ft or 100ft measure for long measurements. These are some of the basic things you didn’t mention that I use on a regular daily basis.

[@frankryan2505]

Funny cos there are still plenty of compressor run guns if you do resi/mid sized commercial in Australia

[@Kewonerdk]

frank ryan I can’t say any thing about you guys down there, where you hang upside down, can’t trust your judgment. But here in the north(I’m a bit northern hemisphere racial😉) we use compressor tools a lot, mostly because of the versatility, you can put what ever tool on it for a lower price and higher performance!

[@brianbarnicle7253]

That’s a great explanation for why to get a Japanese pull saw. Thanks.

[@josephlee7325]

In the US the Apprentice is required the Furnishings nail apron and all tools inside only

[@peterblang34]

Great video mate cheers for that! I’m working as a hammer hand in commercial building to get more experience. I’m 31, changing careers.I want to start an apprenticeship. Residential or commercial, what do u reckon? Would be grateful for a second video on apprenticeship! Awesome stuff u deliver, enjoy watching u guys having fun and delivering good work. Cheers!

[@wing7534]

I’m an electricians apprentice in the US currently and my boss subscribes to “you’ve got to crawl, before you can walk, before you can run” so I didn’t get power tools until after 6 months. And still have to do most things the old fashioned way

[@jodywilliams1626]

This was a very great video, in showing different tools and methods. I'm now half way through my studying carpentry level 2 and I really enjoy it so much. Thanks again for the video

[@sneakynz]

Hay Scott and Paerau up to video 76 so far great series loving it. Just a quick question ,what’s your views on hammer hands as a job, looking for a friend.

[@pcowley93]

Mean vid as always bro. Would you guys be willing to take on a mid 20s eager to learn & work hard apprentice? 🙏🏽🤷🏽‍♂️😎

[@michaelwould]

Thanks for listing everything in the description.

[@redbeard6111]

My first year as an apprentice I did nothing but pack lumber and push a broom my second year I got my nail bags and was the cut man I didn’t learn layout or even how to bang a wall together until I was 3 years in

[@pcatful]

Haven't seen a folding ruler in ages, but seeing you using it may make it seem more sense. Don't see what it's for at the moment.

[@shawnrogerslocal6197]

Not till 3 period power tools are not allowed as far as the Union is concerned. About 2 years

[@stejclfc]

Big Scott!! 12k subs keep it up! Do you enjoy the editing process or do you find it tedious? How much time does editing take away from your days?

[@ScottBrownCarpentry]

I love the editing process. It's a good 3 hours per vid though 🙄

[@DylansDIYWorkshop]

Try to buy used on Craigslist or similar things like that. You can get way more bang for your buck and end up with a lot more tools that way.

[@spence2403]

Dylan's DIY Workshop may differ in the US but that’s is not advisable in the uk as most tools advertised online are stolen, so then you are just funding the problem of tool theft, personally I prefer to buy my tools brand new

[@johnstuzynski5927]

I would like to see another video!!

[@kmonnier]

Could you please go into more detail about the folding ruler, why have both tape and ruler? I haven't ever used one.

[@alexsparks2498]

For getting into tight spots taking small measures I'm only a second year but I remember my first day I turned up without a rule and my boss had a go at me when I said the same thing I now see the point and wouldn't be without it lol

[@TheJoshuadavis73]

I use for installing windows as a gauge

[@jordancypihot496]

mostly for dept measurments and setting up tools and the tape is for layout and marking long lumber

[@georgeb.wolffsohn30]

Get the folding rule with the brass depth rule. It helps when taking interior dimensions.

[@ray_banz5899]

For us in the states we just need to supply are own hand tools. All power tools are supplied by the company.

[@saulmoreno3252]

I started when I was 19... 35 now. My boss had me hand pound all tiko nails and hand pound while rolling trusses... that lasted about 1.5 yrs

[@tk_shaun1463]

Can u make a video of wat u need More into ur apprenticeship

[@woodworkerroyer8497]

Not sure gyokucho sells them, but suizan has FOLDING saws that are great. They are heavier so they cut faster and allow you to put them on your belt if you wanted. A 3ft saw hanging around is kind of weird and dangerous.

[@trapxsenseigaming2220]

Dude thanks for the tip!!! I’m trying to get my apprenticeship so your a big help.im definitely subscribing 👍

[@williammurray1698]

Like your thinking Scott I work in Edinburgh were half the joiners don’t keep updating there tools and hate sharing mine

[@craigmcewan2762]

Uk are handtools only for apprents, we call “these things” nail pullers lol. In the meantime always take good care of your deck 😂😂

[@simonhughes2902]

My company was pretty good about it, they bought the tools and we payed out of our pay checks over a few payments, the shitty thing was though that they didn't but us the right tools, so from time to time id need a pair of pliers, but I'd be shit outta luck because I just wouldn't have any

[@24revealer]

Wow, you must pay your apprentices very well if you expect them to supply their own cordless tools and Paslode nailer. You must have a good contract where you guarantee them steady work for the first year to make this happen??? If i expected an apprentice to show up with a $800 dollar tool bag and $1500 in power tools, I better be ready to hold their hand when mommy isn't there. An apprentice should make purchase decisions on tools when he is closer to being a journeyman and knows what tools he will need for the line of work he will be doing. I'm in Canada and most of the time I'm happy if the help shows up at all. If they have a lunch with them that's a bonus, and if they eat something other than coffee and donuts, they might actually be able to do something...

[@wb5mgr]

Everywhere I worked as a young man all of the Pneumatic Tools, Circular Saws and the large 4' & 8' levels all belonged to the company. I had to supply my belt, hammer,tape, and other basic tools which I started with some used hand me downs and bought a few better ones each check. My first apron was two lightweight leather bags on a webbed belt bought from ace hardware. My first toolbox was open topped which I built from pine shelving and a dowel rod.

[@brandongouge9922]

I was thinking the same! Haha. I was also thinking about how slow the framing must be if they’re all using those gas paslodes! To my knowledge they’re still single shot and I’d hate to try and nail off with one of those. That’s a punch out gun in my world.

[@brandongouge9922]

Phil Gilbert I’m a carpenter in Florida and everything here is built around wind load. When you’re nailing off windstorm osb 3 inch on the seams and 6 in the field with every opening and the top plate being double run 3 inch, no battery or gas nailer out today can keep up with the speed we nail off. I would go broke buying gas cartridges if I tried to use these Paslode guns exclusively. It seems to be a different world where I’m building than where you guys are. Now for punch out or running trim, nothing beats cordless. I do agree with you there.

[@charlesreynolds5323]

@@brandongouge9922 cordless has been keeping up with us pretty decent up in SC. air is still king but the gap is quickly closing there.

[@Patrick-857]

It's all about the tools here. I'm not an apprentice, I was qualified in a different trade, and I got a job as a carpenter because I put together the full compliment of tools and a decent van. Over here in NZ if you have the gear, it's assumed you know how to use it. I'm not even going to do an apprenticeship, I'm going to work for a year or two and get licenced instead. And yes apprentices are expected to fork out for very expensive tools, and no they don't get paid well at all. Wages in NZ are shit. This is why I waited until I found a way to avoid being an apprentice when I decided to switch to carpentry. I have two mortgages mate, I can't survive on minimum wage. These assholes need to realise they are locking out keen, dedicated and committed adults who want to get qualified and already know how to get up and go to work every day, because they pay money that only a kid just out of school would accept. These kids don't know how to work.

[@raphaelkostas]

In Germany it is absolutely common, that the employeed doesn‘t need to buy any tools. All the tools are bought by the employer. This makes much more sense in my opinion.

[@surfriderock]

i agree with everything except the gas guns! i have 2 that i run, i always use them for everything roofing/running around but for static work (eaves, ceiling framing, etc) i MUCH prefer the extra punch of an air gun. everyone i know and work with is the same as well! plus gas over here is AUS is like $20 a tube and that’s just shit

[@Patrick-857]

It's hard to find nails that arent Paslode packs with gas already in the box here in NZ. They have a near monopoly on nails.

[@lindalakota38]

They do make other levels that are good but if your doing lot of doors and fine work and have the money stibila level are almost garenteed to be right on iv had the bobble be off

[@kyzenlanx]

If you're starting your carpentry apprenticeship later in life, your most important tool is ibuprofen...

[@felipejose9909]

kenour. Truth

[@utai4571]

hahaha so true !

[@mushroompsychology1470]

Lol!

[@doubledigitdreams]

I'm in my late 30s and always enjoyed carpentry, how would you go about starting an apprenticeship.

[@kyzenlanx]

Train in the art of being a skilled and generous lover, then find a professional woman who will support you through your apprenticeship. Then practice these sayings: - I promise I'll contribute to the mortgage as soon as I'm qualified. - Look at all the money you've saved with all the work I've done on the house. - I'm sure he'll pay me soon, he must have just forgotten to do his book work this week. - Yes I really NEED this tool, it'll make money in the long run. - I mean, I'm not really into it, but if it makes you happy... you're the boss. * sob quietly and take it like a champ *

[@cuffss7455]

just started my apprentership and found ur video. no joke have everything u mentioned except for the gun which is on my list to get. curious what else would be good to get in the future?

[@peterkite2162]

What do you use for fencing if not an air powered coil gun? All of these tools are essential to be sure, but to ask a 1st year earning $13 an hour (roughly) to go out and spend thousands on tools is a little extreme. I would have an apprentice limit his tools somewhat so he could save up for a solid work vehicle like a ute or van, because how are you going to get your 2m level to work in mums hatchback? Making economical choices is a good idea as well... it works out better to save up for a 8 piece set rather than buying skins in smaller sets or individually. Good video though mate!

[@craigmonty]

Yep. This guy is kidding himself if he thinks it’s reasonable for a first year to literally spend $1500+ before his first day at work. Sounds like he’d be a plonk to work for.

[@rrkmac635]

13$ an hour??? Fuck knows what the exchange rate is right now but a first year in the UK earns £3.45 per hour😂

[@jordancypihot496]

David McIntosh we make 26$ an hour in canada in residential and 32$ in commercial/industrial in good company but not every one is ready to pay for a good apprentice so they give shit salary and hope for good results

[@rrkmac635]

@@jordancypihot496 £15-£17 is pretty standard in the UK but fuck 13$p/h for a first year is insane haha

[@koryrodger9462]

Pencil and a chalkline are important too.

[@Stoneforth]

work and income will pay for up to $1500 worth of tools/clothes if you get a letter from the guy offering you the job