Build Steve McQueen's Iconic Porsche 917kh from Agora Models - Pack 11 - Stages 81-89

[@WorldofWayneUK]

If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne

[@davidspencer8373]

Like video

[@barrywatson2261]

Car looks good without the stickers on the headlights

[@befoot]

Thanks for the great videos. When I saw this car race at the 1000k of Spa they did not use the lens covers....so I won't be using them ether

[@johnhaigh3080]

great video but going to miss the live stream Thursday with the football on at same time will have to watch it Friday

[@milanondrak5564]

I agree that those stickers over the lights don't look nice on the model. It looks sleek and pretty without them but they make it look wrong somehow when they are on.

[@williamtrask1582]

de cal is correct wayne nice going

[@neilhaas]

❤😊 Porsche's hometown Stuttgart,Germany. Nice iconic Nascar. Very nice build all the parts & details.👍🤗☺️🏎️🏎️🏎️🏎️

[@tommyf1507]

I agree on the headlight decals

[@masterlemonlime4916]

If light guards are meant to be on then they should have shaped them better as the gap would do my ocd in badly so personally I would leave of as I would cut to fit

[@hadilu65]

Hi Wayne, great job as always! My Opinion: I would omit the protectors, even if this don't matches the original. Have a nice evening and...take care.

[@rickgregory9616]

Great minds think alike! I'm not going to apply the headlight protectors. They subtract from the overall look of the car. I am leaving the protective film though on the headlights to protect them during the build. The windshield wipers I'm leaving off until the last moment. And, like you I am not applying the passenger side door decal until I receive the bottom skirt. I want to make sure if the skirt comes pre-painted or we apply a decal. AND I also put a dab of glue on the door lock. When testing the lock once on the door, my finger slipped off the button and it pinged off! Luckly, I found it and glued it in. (I also found that the pin that goes in the door lock button, slips out. Gluing the button on that pin solves that problem) But I do find opening the door a bit difficult. I found that slipping a toothpick (cocktail stick) in the small opening next to the lock helps pry up the door enough to open it. I'm 3-boxes away from completing my build from IXO - you'll finish yours before me. I'm anxious to see Agora's Pack 12! (The top half of the 20 decal I did use Micro Set, but I also used Tamiya MarkFit Strong, and for extra protection I applied 2-coats of Tamiya X-22 Clear.

[@mikeking2539]

Sorry Wayne I don't really get why the Decals are not already done for us at the factory? Edit Right tea time then back to watch the rest of Phil's hour long Jake Sully from Avatar video. Got about half way through and then had to have a rest from it, by watching this video.... See you for now, (hope that your dad is doing ok, hope he likes the train set) take care!

[@laydownflat]

The factory applied graphics are not a decal. They're a process called tempo printing. The reason why they didn't want to tampo print the rest of the graphic was to save themselves money. You are correct that the "decal" should have been done at the factory and not by us. We're already paying enough money for the kit, and that should have been already done. After all, we are already the factory worker assembling the kit. At least tampo print it so we don't need some cheapie decal sheet.

[@rickgregory9616]

You know I just thought of something. The hood with the wingnuts; with that secured in place it may be difficult to attach the body to the chassis with the engine parts up so close. And the air intake vents installed next to the headlights, I'm guessing will need to be connected to the hoses we installed that are connected to the wheels - that's going to be interesting!

[@DrsharpRothstein]

I have pictures of the "tear-offs" on the car during a race. They seem to be a race day preparation.

[@enricogrizzlerpavan]

That's Amazing Car🫶💪💪💪 ⭐⭐⭐⭐⭐ Many Thanks for Your Video

[@steve1315]

Nice work 👍 looking good unsure about decals though would have been nice to have numbers painted but cest or vive .

[@barrywhitlock141]

I don't like the look with the stickers over the lights, It doesn't look right at all. the only reason to use them is for the protection of the lights against scratches. the car is looking great

[@garrylewis298]

Nope I’ve left mine off In time the sticker Will shrink & leave a sticky outline... so for that reason the lights stay as they are

[@eddywells5689]

Great vid 🇦🇺🇦🇺🍺🍺💪💪👍👍

[@jacobkrug]

cool

[@williamalexander4837]

with out them

[@stuartwelsford8909]

Agree with the ommission of the light covers. I'm trying to work out which part work to do have narrowed it down to this or the deagostini GT40 (I'm a sucker for gulf livery)! I think deagostini are dreadful idiots though so leaning more towards this one. Looks fantastiche!

[@mikeking2539]

You've moved the X-Wing, was it in danger of falling off the shelf again?

[@WorldofWayneUK]

Yep lol

[@hayred1234]

Good choice without the stickers.

[@lakrfan4980]

I agree with you. The decals surrounding the headlights simply look dreadful.

[@mikeking2539]

Errrm Nope not liking the sticky clear head light protector things !

[@robinaroundtown...2194]

Also...if your doing the IXO Porsche...you do not get the parts to put on the driver's side door... In their box 22... It comes in 23... So Agora Models are a little bit ahead of IXO... Again remember that the decal on the driver's door can be lined up using the passenger side door...but ... The decal for the driver's door is a hair smaller in the white roundel then the passenger side... So if you do a basic off of the passenger side it's about a 1/16 smaller on each edge... Just use the bottom of the doors for the matching... And also ...the light on the right side won't be in the same place because it's set higher up on the door panel... Lastly... The door windows were actually bolted in from the inside so that the airflow wouldn't be disturbed over the door and the pressure pushes in not out... So technically there should be no screws on the window... Just a solid blue 🔵 edging... But that's up to people if they want to change it or not... It does look cool with the screws ...but it's technically not right...lololol Best regards...

[@stevenjohnson1117]

Hi Wayne just a quick one when your ready for doing your dads train layout watch sams trains on you tube because he said he had trouble joining some of track its and as easy as 00 track tke care

[@davidspencer8373]

Like video

[@markquinn1104]

Leave the covers of

[@rflester53]

I'd leave those headlight stickers off Wayne, I think it looks better without them.

[@grandpa9595]

HI, Great Job, When do you think you will do Pack 12?? Thanks

[@WorldofWayneUK]

Monday hopefully

[@geraldogara5098]

There's no need to put them it's only a model ? .👩‍👧👍👍👍

[@user-xf2hw4yz2x]

In stage 82, the air deflector above the Gulf badge is missing and looking at the the rest of that small panel it has clearly snapped off, did Agora send you a replacement part as it is perfect further on in the video, I only ask as mine is poorly made and detached on the right side so no doubt going to come off completely

[@WorldofWayneUK]

It did snap off. I just glued it back on

[@billgriffiths1685]

Did you have to buy a extra issue because of this mistake?

[@WorldofWayneUK]

Nope

[@billgriffiths1685]

@@WorldofWayneUK Wayne, I think you needed to put some Micro sol, as the bonnet 20 Decal needs softening. Love the channel.

[@user-tr3gz6uj6s]

And what about the same Porsche only from IXO Collection? Will there be new videos?

[@WorldofWayneUK]

It’s the same build

[@user-tr3gz6uj6s]

@@WorldofWayneUK I know. I just want to finish watching the Porsche assembly from IXO Collection and not watch the assembly from Agora Models from the very beginning.

[@KN1GHTY]

@@user-tr3gz6uj6s Its the same model. Same parts same steps

[@user-tr3gz6uj6s]

@@KN1GHTY I understand. I just want to watch the assembly from this manufacturer. It's kind of my principle.

[@kevinthornton702]

What a pain

[@user-tr3mn7rz9m]

How much is the total cost please

[@WorldofWayneUK]

All these models come in around £1200

[@meeshker]

Leave them off

[@robinaroundtown...2194]

I mean to everyone doing this build...like I had stated in my email to you... Just take your time... It's not rocket 🚀 science... That's the stickers...the decals... The doors... everything...mine all worked fine the first time out... "Just take your time"...lol

[@DrsharpRothstein]

If anyone wants to see the headlight "tear-offs" on a 917 see KZbin channel 'VinWiki'. Look for The loophole Prosche racecar Ferrari couldn't touch! VinWki. 13, April 2022 Story by John Ficarra Heck of a good story about 917 in about 24 minutes running time.

[@robinaroundtown...2194]

Wayne...you put the stickers on the wrong sides...lolol 🤣🤣🤣🤣 You flipped them ... Just look at the curve of the light and the point runs inward not outward....lololol You got them completely on wrong...that's why they don't work...lolol 🤣🤣🤣🤣