They don't want you to know about this video transmitter (AKK TX5000AC)

[@VinydFPV]

I have a couple AKK receivers on a couple of my drones and I love them. I've never had a problem with them and the feed is always clear. Great video my friend. Fly or die!!!

[@Firewolf-9389]

Thanks for the video!! I’ve watched all you videos and they help so much!!

[@providenceagent2372]

what would be the estimated maximum range?

[@RoboArc]

As long as the battery lasts lol.

[@jackyergensen8053]

100 million miles

[@joshuasampson6971]

When are you going to review Akk 16w vtx ?

[@bobersonRC]

You need to try the Ratel Pro camera, still happy with the regular Ratels, but the pro does have a better picture, my older goggles never looked so good.

[@granite2kfpv]

I think the weird lines you're seeing when you're close to yourself has to do with the amount of power this thing is putting out. I'd be curious to see if they went away when you lower the power. If they don't go away, then maybe you're right about it switching to the omni.

[@geogmz8277]

I'm closely following this series. Your first video inspired me to finally start building my own drone FPV any chances of doing this same build but with Ardupilot? I would love to build mine with Ardupilot instead of Beta Flight... I got almost everything from the last video except for the FC stack.. I think Ardupilot might be able to work on F4 or F7 stacks but I haven't really put time to research this and confirm it.

[@hoardersam10]

Yeah I'm planning on an Ardupilot or PX4 tutorial one day but it's pretty hard to set up. I have one drone running Ardupilot and it took hours to set up and a lot of little quirks. I might do INAV first since that's pretty easy and has a lot of similar automation features

[@geogmz8277]

​@@hoardersam10😊 either one is great 👍🏻 thanks for the effort put on these videos.

[@betojfreak]

I second the inav. I am working on my 7in I made thanks to you but with Walksnail. No osd though so trying to fix that.

[@geogmz8277]

​@@betojfreakHey no complaints here if Inav it is! 😂 Im more interested in autonomous flying than Acrobatics.

[@NavalTechTinkerer]

Are these legal in Europe? I thought the limit was 2.5w?

[@learn.sth.useful]

Thanks for the video. How did you supply the input voltage of 14.6-28V to the AKK? Did you take it directly from the battery, or did you use a voltage regulator?

[@hoardersam10]

Yes the battery voltage (BAT pad on the flight controller)

[@nonamefound68]

Betaflight allows you to create your own tables for your vtxs. Maybe that could help with the 48-channels limitation?

[@savash3302]

Hi there tnx for the video! Do you actually saw any benefits from the biblade propellers? Flight time and battery usage wise ?

[@PavelMy]

I still don't understand what the range is? There is no distance on the OSD, nor in the description...

[@HolyOllie]

there are so many more variables to range then just power output. you can fly for 10s of kilometers on 1 watt if you have direct line of sight and a directional antenna

[@PavelMy]

@@HolyOllie Well, about dozens - I don't know, I had ordinary glasses, without patches, and it was very difficult for me to fly beyond 2 km. Is it possible to be sure of a range of 10-12 km with these 5 watts, with patches on the glasses? How far have you flown yourself? I am writing to you from Russia through a translator

[@jackyergensen8053]

100 million miles

[@squirrelynutz1]

Using pigtails above 3w usually blows the amplifier. It ends up only outputting 500mw. A swr above 1.6 will blow it. Its better to use a direct antenna connection.

[@cinemoriahFPV]

False

[@squirrelynutz1]

@cinemoriahFPV not false most pigtsils are made bad. They raise the swr to much. It reflects to much power back into the amplifier. This is with high powered vtx only. Normal 2.5w and below it doesnt hurt them as easily. Tbs unify pro32 dp 3w manual even states this fact

[@Tom-z1e]

Please can you explain

[@drink_kompot3656]

which current sensor chip did you buy and how to wire it propely?

[@hoardersam10]

I bought the INA139, there is a SOT-23 pad on the ESC that it should drop right on. However it's very very difficult to solder with an iron and I didn't get it right. I think it might need hot air soldering.

[@drink_kompot3656]

@@hoardersam10 oh damn that is a tiny component. can you maybe draw on a picture of the esc where its supposed to sit?

[@XAirForcedotcom]

Jamming in a combat area like Ukraine is why you have a wider frequency range and all the channels. : )

[@XAirForcedotcom]

You may be overloading the receiver when you’re closer to yourself and that’s why you may be seeing banding.

[@fritzstudios8571]

No shit Sherlock

[@LocoTheSquirrel]

Producers of a product don’t want you to know about it!

[@afafiff]

can this be used with the built in steadyview receiver on the skyzone goggles?

[@hoardersam10]

Yeah it will work

[@rayjhendricks]

5.4ghz and 96 channels. Is this economy of scale due to Ukraine and Russia war?

[@faebu8601]

Tbh i flew 20k on a tbs unfiy pro32 nano at 400mw+. As long as you have clear line of sight and up in the sky video stays clear along way out

[@canigetachannel]

My longest flight [7"] is 19,682m ! 👍✌️

[@FlyinFreek]

Dang, and AKK just dropped their 16w vtx...

[@rainsquadfpv]

Ukraine would be happy with these you should try the runcam Phoenix 2 se will give you better picture and night flight capabilities

[@AricGardnerMontreal]

why would your googles be able to tune into non standard freqs?

[@bugsy742]

Your goggles are capable of a wide range of frequencies 👍 Standard just means most commonly used

[@AricGardnerMontreal]

@ mine aren’t but OK

[@Camilookb]

This is made for war.

[@Rvalivesound]

Make analog great again!

[@malachiteofmethuselah9713]

Be stronger than the marketing propaganda and you will see that analog has been great all along.

[@Rvalivesound]

I Only have 1 digital quad and that is the Neo RTF. My builds are all analog.

[@gaetancantelobre5319]

cries in EUW 25mw limit.

[@jojomc69]

TBH nobody cares about those complete Bullshit laws as long as ur not over a military base or something like this

[@technicalsupport6983]

Use 1.5 watt 1.3 ghz ....you get same range bro...

[@joshuasampson6971]

Please make a video on the installation

[@fritzstudios8571]

Slava Ukraine