THEY SEE ME ROLLING ..... (Hookers and Blow 23)

It's a roller (again). Finally finished cleaning, buffing, and painting parts and got to start putting Hookers and Blow back together again. This time as a final build for the trip to SEMA. The axles are in, the wheels are looking killer, and the air ride is properly assembled. We are finally checking some stuff as done on the list.
The full color Hookers and Blow merchandise is now on the Hardcore Fab TeeSpring store, be sure to check that stuff out! hardcore-fab.c...
🔔 Subscribe for more / hardcorefab
Thank you to our build sponsors steelerubber.com and dynamat.com
Thanks to Just Clips Tools for sponsoring us at SEMA 2021 ( / @justclipstools9590 )
A special Thank you to Jack Pollock of Trulers.com for the cool intro.
Visit our website: www.hardcorefab.com
And if you've read this far, leave a comment below and let us know what you think of the build.
Thanks for watching!

[@mikescott3641]

Mighty fine..new camera clarity too!

[@stanleyfanning5316]

Jeff did a nice job on the wheels looks awesome.

[@jusike633]

Looking forward seeing you two rolling along. Fine work

[@shotsrodder]

Looking good Anthony 😎

[@bobteague4681]

Looking great!

[@hankpugh4980]

Sure looks great, looking forward to seeing the progress.

[@IronHorseGarage]

Awesome!!! Looking good!!!!

[@georgefallen1577]

Your get.n it just aint got it yet. Looks really good.

[@HardCoreFab]

Haha

[@derrickrice2010]

That frame looks sick, killer job buddy.

[@williampalmer4676]

Good afternoon, Anthony. Loving the progress! The wheel jewelry was a great surprise! Really adds to your vision. See you next time.

[@shanewright6958]

The wheels are looking good 👍👍🇨🇱

[@thercbarn5001]

Looking really good! Can't wait to see it come together.

[@lorenmeyer5290]

AWESOME Anthony! Looking great!

[@terrykelsay6260]

coming along very nice

[@nelsondeason9778]

You did look like you knew what you were doing!!

[@HardCoreFab]

Lol good editing

[@MIKEH.777]

Jeff did a fantastic job polishing them wheels, they look like they are brand new. You did a fantastic job on the truck and I love how you ran the air hoses so far . That frame really does look beautiful, it's nice and shiny black. Keep up the great work and God Bless you. 💯👍💪🏼🙏🙏✌😁✌

[@HardCoreFab]

Thank you!

[@joethanks3745]

Once again a great video .I love this build👍👍

[@chuckster6513]

Hey Tony H&B is progressing right along. That Bling in the Wheel centers is a great touch on those deep wheels. This is gonna be a great lookin Ride. Lookin forward to seeing H&B finished. I am not going to make it to the Hutchinson Down Town Rod Run due to plans I had forgotten about . Maybe I can get by the shop sometime. Work Safe, Be Well

[@HardCoreFab]

Its looking like rain anyway

[@MrRoscoj]

Great progress! Looks so goooood!

[@thomasbrighton6159]

I will never be a builder like you, but I love watching your work. Hookers and blow is American art, and I’ve learn a lot by being able to watch you conceive and build it. Your videos are inspiring and I wish you great luck at SEMA!,

[@HardCoreFab]

Thanks!

[@deniseprettner2020]

Just think. Your almost ready to start another build. 👍

[@HardCoreFab]

Closer everyday! HAHA

[@geoffreymills9932]

That's one sweet chassis, and the wheels came out perfect, just keeps getting better all the time,,, LOVE IT

[@johnnygarrett6055]

This truck just keeps getting better and better. I really like the wheels and the painted frame

[@HardCoreFab]

Thanks!

[@tomwilkinson2184]

Anthony , I really appreciate you sharing this. You're truck is looking Great !

[@shoptalkwithbub4352]

Awesome it’s a great feeling when a plan comes together, you need to bye your buddy a few beers 🍻 those wheels look phenomenal good eye as always.

[@ronthompson2366]

With every step now you are just enjoying the ahh factor. Anxiously seeing the finished product and it is looking great. 👌

[@ryand.8176]

Very cool!

[@scottrickard7202]

Looking awesome and shiny. Lol

[@retrofabrication518]

Looks great! Polished truck wheels 👍🏼👍🏼

[@brianparks1727]

Really have enjoyed watching, awesome work, beautiful fabrication work!

[@HardCoreFab]

Glad you enjoyed it!

[@TrendsbySterling]

The build is looking great Anthony! I see you and I are still mounting the tires the good old fashion way!

[@HardCoreFab]

The cheap way 🤣

[@staxonvehicletracking3468]

😍😍😍 looking good

[@oldtown6240]

The wheels really look great, but I did not see a video link with Jeff or is that something to look for in the next video?

[@HardCoreFab]

Should have it up tomorrow

[@georgemcmillan9172]

Why Tony! Man, it looks good enough to throw some seats on it and drive! Any Titanium skid plates in the future?

[@HardCoreFab]

That would be fun! Always thought the ultimate combo would be titanium skip plates Flame thrower and a smokey burn out all at the same time

[@jwjr2197]

Boom 1st Ton of work to maintain that shine

[@DesertRatFabrication]

Hey Anthony, i'm back on H&B, took a little break, but back now, you got a roller and looking awesome, catch you on the next one brother

[@HardCoreFab]

Welcome back!

[@DesertRatFabrication]

@@HardCoreFab 👍👍

[@mikelewis5900]

I wish I was closer I would've bent all stainless lines and welded you some stainless tabs for your brake lines. Love the build.

[@HardCoreFab]

I wish you were closer too! That would be bad ass to have it all in SS

[@speedbuggy16v]

It looks like you have used a set of tire spoons a time or two. I knew you would not be able to wait to try it, LOL. What no three wheel motion?

[@HardCoreFab]

It won't 3 wheel. Lol it's not on hydro.

[@speedbuggy16v]

@@HardCoreFab it might if you get a fat chick to set on one side of the bed!

[@johnfitzhugh2871]

Looking good bubba

[@mikelewis5900]

Man those air lines in stainless would have been great to I love working with stainless tubing.

[@shawnwoodfill8825]

Maybe in the future should look into super singles for the rear tires

[@svsalacia6495]

When do you sleep? Nice work.

[@HardCoreFab]

What is this sleep you speak of. lol

[@steveschumacher5470]

sweet

[@FRE2FALL5]

Hey Anthony, looking good so far man! Can you do a little video on the air ride control your using? I like the manual control aspect, !

[@HardCoreFab]

Yes! I'm planning on doing a video just on the air ride coming up, stay tuned!

[@blacknova28]

Are you going to paint the front shocks? Maybe same color as firewall might look good. Love this build it is awesome.

[@HardCoreFab]

Idk when I get the grill sitting back up there I'll see how much you can see them and decide then

[@loganollis9489]

I'd be interested in hearing about all your air management in the next video

[@HardCoreFab]

I'm doing a whole video on the air system but I can't finish it tell the truck is all together. So it will probably be a month or so before it's done

[@loganollis9489]

@@HardCoreFab awesome sounds good

[@EdgeofEternityBillCameron]

Beautiful suspension and frame set up. Did you powder coat or paint the frame?

[@HardCoreFab]

Paint

[@GuyBrown]

What size wheels and tires did you go with?

[@HardCoreFab]

17s in the front 22.5 in the back

[@mamaleighcase1569]

I was hoping she would have dualies on the rear...now Iʻm kinda liking it. Aloha from Hawai`i, Mama

[@HardCoreFab]

Aloha!

[@mattozx6rr]

Just a question. After all the time you have spent so far, Why didnt you hardline the airlift system along the frame then finish out in braid? Just a question.

[@HardCoreFab]

Out of time and over budget!

[@mattozx6rr]

@@HardCoreFab Fair answer! Thank you. Really is a killer ride all the way.

[@randywiddis]

Strange question... How thick is the top of your steel work table?

[@HardCoreFab]

3/4

[@Thewarhorse47]

Mounted your own tires like a mad man. Nice. Do they need to be balanced?

[@HardCoreFab]

They roll smooth at 70 mph

[@davemoulding8799]

For your info paint doesn’t stick to bare metal without priming first

[@HardCoreFab]

That is true for some paints but not all. Google it!

[@martinpook5707]

Seeing the chassis go up and down reminds me of my old Citroens, turn the engine off and they settle down. Remember where you parked because in a line of cars you can't see them!

[@HardCoreFab]

Citrones are cool cars!

[@mr.goodpliers6988]

Wheels are dazzling! Bad to the bone...

[@HardCoreFab]

Yeah Jeff did a killer job on them!

[@joell439]

👍😎👍

[@shawnwoodfill8825]

Looking good . Look better of it was mine

[@HardCoreFab]

😂😂😂😂

[@Boogieshoes-s9o]

Get back to work you have alot to do in 2 weeks giggle giggle be cool to see in person if you stop in kearney on your way west

[@HardCoreFab]

Boy that's the truth. Lol not sure if we will be going through Kearney or not

[@Boogieshoes-s9o]

@@HardCoreFab you go I 80 west of lincoln you should