Thickness - Drum Sander - Motorized Feed Mechanism - Part#2

I made a drum sander. I update it now. This drum sander now has a motorized slide. No need to use your hands to push and pull. Sand the wood easily.
#designedbygreensaw
➤New motor features:
Name: QB70
0.75 HP
2850 RPM
Please first watch the video of the first part,
➤First part of the video: • Drum Sander - Thicknes...
#drumsander #thicknesssander #sanding #motorizedsliding #greensaw
➤Join : / @greensaw
➤PDF (The Gear Template) download page: www.greensawdiy.com/thickness-...
➤Tools / Supplies used:
Disc Sander: • Disc Sander Homemade 2...
Wooden bench vise: • Wooden Vise Making DIY...
➤You can also like these videos
Angle Grinder Stand: • How to make a Angle Gr...
Benchtop Jointer: • Benchtop Jointer makin...
Router table lifter: • Router Table making + ...
Drill powered belt sander: • Drill Powered Belt San...
Bar clamps: • Bar Clamps making + Di...
➤Subscribe kzbin.info?sub...
➤My website: www.greensawdiy.com
➤Playlists:
DIY Tools: www.youtube.com/watch?v=PLZFz...
Clamps: • Bar Clamps making + Di...
Sanders : • Thickness - Drum Sande...
Wood Turning : • WoodTurning
Drilling Tools : • Drilling Tools
Wood Works : • Wood Works
Celaning : • DIY - Shop Vac - Part ...
Band Saw : • Band Saw Making - Part...

[@GreenSaw]

New motor features: Name: QB70 0.75 HP 2850 RPM

[@fredlaird5006]

Where do you get your motor?

[@gopalmaharana9931]

​@@fredlaird5006 bbbbbuyyyyhhhhyhu

[@Sapis]

Hallo ... mein Automatischer Vorschub ist fertig! Dank deiner Zahnrad-Schablone habe ich die Übersetzung vom Motorgrill auf der Antriebswelle einen sehr guten Vorschub. Bin sehr zufrieden!Ist eine Prima Sache !👍 Grüße aus Deutschland

[@GreenSaw]

Hi, ich bin so froh, dass es dir gefällt. Danke.

[@daef_valerapozhitkov3203]

Молодец! Удачи тебе! И успехов! Супер!! Спасибо,за видео!

[@danielricardoaugustowood5840]

Excellent engineering work, congratulations and thanks for sharing!

[@Sapis]

Sehr guter Tipp! Ich werde meine Rollenschleifmaschine auch mit den Mot.vorschub ausbauen. Mit den Holzzahnräder ist eine gute Idee. Ich verwende einen Motorgrill dazu.👍

[@maker202]

I live this channel ! Thank you for sharing your video. Best drum sander... Best regards :)

[@evandropassosveiga6911]

Excelente. Dá prazer de assistir. Parabéns.

[@forresthurst137]

You are a genius!

[@willybaetens3260]

Thank you very much, well done. I will build it myself, and thanks for the dimensions too. Willy from Belgium. 👍👍👍👍👍👍

[@GreenSaw]

You can download the PDF (gears templates)

[@willybaetens3260]

@@GreenSaw Thank you, I just did it. Willy from Belgium.e 👌

[@seabex5162]

Super Arbeit. Respekt.

[@HansPeterLehmannhpl]

Sehr schön weiterentwickelt, danke fürs zeigen. mfg vom Niederrhein hpl.

[@gertbruckner7711]

sehr gutes und informatives Video Danke

[@Dickie2702]

Brilliant design. I am amazed that the little RC Servo Motor is powerful enough to run the feed roller. Excellent channel, please keep up the good work.

[@richardnava4141]

Gran trabajo, buena herramienta, gracias.

[@user-fj5vm5rj9h]

Отличная работа. Спасибо за целую кучу отличных идей. Наткнулся на ваш канал - замечательная находка. Предлагаю несколько поправок к тексту в описании Ранее я сделал барабанно шлифовальный станок. Сейчас я его доработал, теперь у него есть моторизованная подача. Больше не нужно использовать руки, чтобы толкать и тянуть. Шлифование любой древесины происходит легко.

[@spannerman4886]

I'm building one at the moment and trying to design a way to fit a feed belt on the table then I saw your video and the feed roller Brilliant!! just like a thickness planer, so why didn't I think of that??? Thankyou for sharing 👍🏼👍🏼

[@amilcareposti2437]

ECCELLENTE, lavoro veramente eccellente, semplice ma efficace. 👍👍👍👍👍👍👍

[@GreenSaw]

Thank you...

[@elvisdehartedailyprayers3651]

I enjoyed watching your DIY video

[@GreenSaw]

Thank you.

[@electronic7979]

Super 👍

[@n.talbert]

Amazing. I just found your channel. I am looking forward to watching more of your videos.

[@renel.1229]

Espectacular. Saludos desde Argentina.

[@GreenSaw]

Gracias Sinceramente.

[@mtabernig]

Very good job, excellent workmanship. I just finnish with mine. @

[@gilsonoliveira5780]

Gostei, ficou muito bom mesmo. Parabéns.

[@GreenSaw]

Obrigada

[@Selberbauen]

Ich wüncshe dir viel glück...👍😊

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@GreenSaw]

Merci d'avoir regardé et commenté ma vidéo.

[@vikshaban]

Великолепно!

[@KickinAshWoodCo]

A CNC machine would have made this a hell of a lot easier! This is probably one of the best designed drum sanders I've seen though!! Great work!

[@GreenSaw]

Thank you.

[@multibusa]

Chris Phillips Great if you just happen to have a cnc machine just laying around in your shop, but failing that, it’s make the gears yourself. Far more satisfying I’d imagine, at least there were only 2 of them.

[@catherinehargreaves9959]

hi. both videos are very good, thanks for the p.d.f. jack., england.

[@GreenSaw]

Hi, I am very glad that you like it. Thank you.

[@erosp9346]

Bel lavoro, ciao by Italy.👌

[@GreenSaw]

Ciao grazie

[@fotografoclovissteil9613]

very good!!!!!!!!

[@GreenSaw]

Thank you...

[@andrelasmarluthier]

Muito bom, vou baixar o pdf para montar a minha.

Merhaba bu daha da biraz geliştirilmiş modeli oldu. iyi iş çıkarıyor. keyifle izledim. eline emeğine aklına sağlık. paylaşım için teşekkürler. selamlar saygılar...

[@GreenSaw]

Teşekkür ederim.

[@manuelsotelo9069]

Excelente muy bueno tu herramienta de trabajo para lijar las madera

[@GreenSaw]

Grasias...

[@damasofeliciano8381]

Muy bue invento.

[@danielhenaff6630]

Waowww Vous avez osé montrer une erreur ! Peu de gens l'auraient fait et je vous en félicite, je vous dis bravo !!!

[@GreenSaw]

Merci....

[@siboruremajeanbosco8333]

Thanks for this l m going to applicate 01simple by the support is needed.👏👏

[@damasofeliciano8381]

Realmente bueno.

[@acfchaves1444]

Muito bom o seu trabalho, parabéns vou tentar baixar o pdf

[@GreenSaw]

Estou feliz por ter gostado. Obrigado pelo seu comentário.

[@Trainera]

Magnífica idea. Una corrección al texto, donde pone "Lijar cualquier bosque fácilmente" debería ser "Lijar cualquier madera fácilmente"

[@GreenSaw]

Muchas gracias por tu ayuda...

[@AndyJenkins999]

Wow that little RC servo is strong, seems to work really well.

[@GreenSaw]

Gears increase torque.

[@AndyJenkins999]

GreenSaw works very well indeed well done

[@gianfrancogelatti3336]

non è una cosa nuova,io ad esempio l'ho fatta con 2 rulli di trascinamento,uno in entrata ed uno come il tuo in uscita.Naturalmente i due rulli sono sincronizzati per girare entrambi alla stessa velocità.Comunque bel lavoro,bravo ++++

[@korayayhan5551]

Güzel..

[@MrWoody17309]

Hi i was wondering where the motor and the RC motor were from. Is it a special purchase or just from on old machine. Could do with some pointers on where to get them from. I really want to try and make this one. ALl your vids are really going to be helpful in the long run I think.

[@crossgrainwoodproductsltd9230]

Your brilliant. What a good but fairly simple idea. What size is the motors hp? I actually might be able to afford a thickness sander now!

[@GreenSaw]

Hi, the motor is 0.75 hp please see video description for details.

[@gedreillyhomestead6926]

You changed out the bench grinder for a dedicated motor, what are the motor specifications? 👍 I also wonder whether a car wiper motor would work instead of the servo. Nice job and thanks.

[@GreenSaw]

Yes I changed the motor. The new motor was turned from a cheap Chinese water pump. New Engine features: Name: QB70 0.75 HP 2850 RPM

[@Dickie2702]

In the middle of building your drum sander and I'm interested in knowing what the feed rate you have achieved with your set up. Have an RC Motor to drive the roller but would like to know how fast your machine was moving the timber as this is what I will base my gearing on? Hope you can help?

Güzel çalışıyor. Zımpara değişimi kolay mı?

[@GreenSaw]

Bir defa değiştirdim hiç zor olmadı.

[@paulomesquita6315]

BD. Parabéns, excelente trabalho vou tentar fazer uma já baixei pdf. Pelo que vi vc trocou o motor na primeira usava um de 400 w fiquei satisfeito pois poderia usar minha furadeira de 650 w. Então lhe faço duas perguntas: atrás do rolo de lixa colocas uma barra rosqueada que material que ela está envolvida não consegui definir, e que motor é este que está usando, desde já agradeço pela atenção obrigado.

[@GreenSaw]

Estou tão feliz que você gostou. Posso não ter entendido sua pergunta completamente porque minha língua materna não é o português. Eu estou usando Google Tradutor. A haste roscada é de tamanho M6. Usei um cachimbo cano de água de plástico. Usei um servo modelo de avião para girar as marchas. Veja o primeiro comentário para informações do motor principal.

[@multibusa]

That’s a very nifty drum sander you’ve built there which looks to be very effective, especially on difficult timbers I would imagine. This project can also be made mainly from ply off cuts making this a low cost drum sander. I feel that this build is within the realms of most people that work well with their hands. Can be a little cheeky please? I have some questions I’d like to ask you if I may? I’m wondering why you have built the bed on an angle as this would seem to limit the length of stock you can feed through before it would foul on the bench top unless you hang the out feed over the edge, was there a specific reason for this? Can I assume that the RC motor is a stock item from a model shop, and do you find it powerful enough and could you mention the spec on the motor please. Many thanks for sharing your design.

[@GreenSaw]

Hello, thank you for your comment. - We have to build the bed at an angle, otherwise it is not possible to adjust the distance between the drum and bed. - Yes you can buy a servo from a model shop. I used this: kzbin.info/www/bejne/qpSnfamtipyombM Specs: Dimentions: 40x20x38mm Weight: 39g Voltage: 4.8v / 6v Speed: 0.19sec/60deg (4.8v) - 0.15sec/60deg (6v) Torque: 5.5kg.cm (4.8v) - 6.5kg.cm (6v) Spline Count: 25 Gear Material: Mixed materials Gear Type: Digital Motor: Brushless

[@elvisdehartedailyprayers3651]

How about DIY home made thickness planer.

[@gregmislick1117]

Servo motor likely will not hold up to the task for long, they are strong, but the duty cycle is like 10% sort of thing. They are meant for very short period of work, then rest.... only time will tell, good gear ratio though... so perhaps...otherwise it's a spot on build NICE!

[@GreenSaw]

I don't think there's gonna be a problem. You can use metal gear servo if you want. I made a model airplane for a very long time and I flew :)

[@gregmislick1117]

@@GreenSaw me too...it's the duty cycle, not the strength...like heat dissipation and stuff. I mean, it's perfect if it holds up...cheap enough if it doesn't

[@fabianogeneroso1]

👍👍👍👍

[@ea1apg]

Muy bueno estoy haciendo algunos de tus modelos, ahora estoy con la ligadora de tambor (Regruesadora) De que potencia es el motor y de cuantas revoluciones, un saludo y Gracias €RN€STO

[@GreenSaw]

New motor features: Name: QB70 0.75 HP 2850 RPM

[@revilo8418]

…noch eine Spannrolle für den Keilriemen, dann ist sie fast perfekt 😉

[@albertobill1]

Hello dear friend! I subscribed to your channel, I think its wonderful videos, but I see in many of the videos in the left corner "pdf free", but I can not find how to download these files, if you can answer me, big hug.

[@GreenSaw]

Please see descriptons. Go to download page and clik to Dimension PDF DOWNLOAD. (bottom of page)

[@fernandoluisdantasamorim4174]

Muito bom! Já fiz a primeira parte. Quero fazer a segunda parte, mas não sei como ligar o servo hextronic hx5010 à fonte de 5V - DC. Desde já agradeço a atenção.Saudações

[@GreenSaw]

Desconecte a conexão motor-eletrônica no servo. Aplique a alimentação de 5 V diretamente ao motor. kzbin.info/www/bejne/sH3FiKegrMRqpac

[@fernandoluisdantasamorim4174]

Muito obrigado.Melhores cumprimentos @@GreenSaw

[@alisilahtarlioglu1413]

👍👍👋

[@ariandaddy]

How do you adjust for different thickness wood?

[@GreenSaw]

Please see part1 video: kzbin.info/www/bejne/r5zLkKJodrOMj5Y

[@andikaprasetya2570]

Rahayu....Luar biasa... sangat bermanfaat... cuman mau free pdf nya susah nyarinya

[@GreenSaw]

www.greensawdiy.com/thickness-drum-sander-motorized-feed.html

[@rayscrafield2106]

Can you give us any idea where you get your motors? Are they new or scavenged from other equipment? The RPM on that motor is not familiar to me. On bench grinders we see either 1725 or 3450 mostly. I want to build this sander but I'm at a loss as to where to find the motor in a comparable size/horsepower/RPM. Your build is great and I want to copy what you have done. I'm in the U.S. so the measurements you use will have to be changed to suit but it will be an easy thing to do. Thanks for putting this video together. Very helpful and very ingenious.

[@GreenSaw]

The motor, I used was converted from a cheap china water pump. See video descriptions and comments.

[@Dickie2702]

Try ebay for second-hand electric motors, in the UK there are plenty. Any speed, within reason, will work. If you need to adjust the speed this is simple to do by sizing the pulleys correctly.

[@Dickie2702]

Actually also remember that torque is relative to speed when reducing or increasing from the stated numbers. So a 1/3 up motor running at 3500rpm reduced to say 1750rpm will produce twice the torque (ignoring the small mechanicsl losses blah blah blah). 1250rpm to say 2000rpm is OK for a sander like this and the one I built is still running of a two speed electric drill. Will be happier when I can find something a bit quieter. Personally I am looking to make a series of machines that will interchange with the motor. Different gearing for different applications. I digress Greensaw is a clever guy and he builds his creations for us to direct without all the bells and whistles of so many youtube channels. I happily unsubscribe from any that has a video titled "the world's greatest ever super Fandango table saw sled ever". This channel is good down to earth stuff made from scraps we all have. My version stands me in at a few £'s for bearings and £10 for the RC motor. All up less than £25. I have used it extensively and it is super accurate, as the drum is perfectly aligned to the bed of machine by the way it's made. Further note is if you want printable plans for different gear ratios go to woodgears.ca/gear/ you can select and printnanybratiomyou may need. Matthias Wandel is the father of youtube woodworking channels.

[@nardifilippo9100]

Filippo Nardi: vorrei sapere la marca del motorino di trascinamento e che lo commercializza. Grazie, ottimo lavoro.

[@GreenSaw]

Name: QB70 0.75 HP 2850 RPM

[@larsrasmussen877]

Maybe its me, but I cant find the "Drum Sander Gears" PDF...???

[@GreenSaw]

Please see descriptions. (or click www.rcturka.com/thickness-drum-sander-motorized-slide.html)

[@SerB545]

Супер!!!

[@amtpdb1]

could not find the download. everything I clicked on sent me to another page!

[@GreenSaw]

Did you see this text ? "The Gears Template (PDF) : DOWNLOAD" Click DOWNLOAD

[@raflonoce]

10

[@villijs33321]

Not smoth finish because sanding spindle is perpendicular to travel direction - that's a feil in tis design...

[@user-tj7gk1qw2p]

Голова

[@naufragonaufragado87]

Casi 27 minutos? No podría ser más corto? Menos aburrido? De música puedes poner unas rumbitas?