this 8000w ebike is Insane!!!

doing a ride on my ridiculously fast diy 8000w ebike, just to show you its holding up great. fardriver nd72850 controller, qs273 8000w hub motor 3.5t 54.7ah battery with 21700 p42a molicel battery.

[@davidcrowson4745]

" don't mind me I'm just pedaling", LOL... Amazing!!

[@E-bikeguy]

🤣🤣🤣🤣💯

[@robcoastalga8279]

You are at the point where a Cane Creek Viscoset Is something I'd highly recommend and almost beg you to get. Man it makes it so much more stable at high speeds. I can't explain how much more planted yet agile the bike will be. It's steering damping for e-bikes, mtbs etc. Edit: I've got almost 2k miles in my Viscoset. The damping is adjustable, easy to install.

[@E-bikeguy]

Nice send me a link

[@beddamade]

Bro it’s crazy how fast your bike picks up speed. That’s what I need, but I want to keep it to about 50MPH.

[@E-bikeguy]

Yes lol 50mph is more than adequate lol but it's nutz tho 😅

[@beddamade]

@@E-bikeguy I sent you a friend request on Facebook. I have a few questions.

[@E-bikeguy]

@beddamade ok I'll check it out

[@RandyRides]

How have I never seen your channel before? Bro, that build is crazy! ⚡️⚡️

[@E-bikeguy]

Thank you 😊 soon I'm going to strip it down and paint the fame

[@9MileRoar]

Hi Bro, at the end of the day, the phase amps or amps are just for acceleration and torque and it's a preferential preference so it's up to what you like the feel of the bike to be like also you could take into account the weight of the bike. If you want a heavy weight feel or a lightweight feel, obviously if the bike is heavier It's gonna feel more stable at any speed. In contrast, the light bike will be a lot more agile and twitchy either speed so it's down to personal preference and striking a balance. So you might remember I mentioned before that even though I have used the Sabvoton 72200 in the past, I think the specs on that are lying compared to the Fardriver because these controllers blows the rest out of the water man. Even if you set the Fardriver 96850 to the same specs as a Sabvoton 72200 it still seemed more responsive and more powerful, so I believe the specs that they give for the Sabvoton are false. I hammered my bike the other day in the hot heat for two hours straight my motor was hot obviously because I'm using a qs205 5t which is built for torque not for top speed. It reaches the top speed of 34mph at 58v 400a continuous, 800a burst for 10 sec. Using the full phase the bike can hit that top speed in like 1.5 seconds it's crazy! It will also go up steep hill inclines at 19mph easily. I will upgrade to the qs273 5t in the coming winter months and increase the battery to 91v 40a. Keep going bro your channel is your inspiration to us all.

[@E-bikeguy]

Thank you very much and you is right about the fardriver controller. It so crazy 🤪 so much power

[@Rambling_Rover]

So, you accidentally made the fastest e-bike when you were going for range 🤔 😂 As far as doing a range test.. That thing will go so far you never run out of battery before you wear out Maybe set it up on a bike trainer stand and let it run a few days 😂

[@E-bikeguy]

@@Rambling_Rover 🤣🤣🤣🤣💯💪

[@douglasdavidson3701]

​@E-bikeguy I have a 1500 watt motor and a 48 v 15amp battery, what controller should I get

[@E-bikeguy]

@@douglasdavidson3701 try the sabvoton 7245 with ukc1 display

[@mikev8341]

At these speeds. Gear is what we should be focusing on. Ride safe cuz

[@signalselect]

Wow! Your channel and comment section is becoming such a great resource for home builders. Some ideas for future videos - maybe modifying your bikes triangle to fit the battery ( a how to for us amateur welders ); and I'd be curious if you have any security features - do you just lock it up, or do you have any app enabled features that people couldn't start it up and ride off? Great stuff! Stay safe!

[@E-bikeguy]

Thank you but yest I have a lock and alarm just have not installed it yet

[@cryptoken9064]

1st time watching you. Nice ebike you made and nice video.

[@E-bikeguy]

Thank you💯

[@IQuailey]

I like the hat EBG thats your trademark would also look good on t shirts and hats with that logo /decal you have.. different colors etc just a thought lol

[@E-bikeguy]

Wow that's a great idea, thank you so much 😊

[@robertkelly469]

That is one hell of a bike you have there, and I like your prowess with building the battery's.

[@E-bikeguy]

Thank you 💯 it's a wonderful bike I built 💪

[@Soulie81]

Yeah bro I rode my bike to a friends last night and got it up to around 54 and I got some double-takes as I was passing people in cars. I get more looks from other weirdos out riding their bikes in the middle of the night.

[@E-bikeguy]

🤣🤣 yeah people like WTF lol

[@akmw44]

​@@E-bikeguyhow much and where from pls😊

[@E-bikeguy]

@akmw44 I got all my stuff except the battery and bike from aliexpress, do you want a link

[@mA-ug5ts]

​@@E-bikeguyI think he wants the whole bike 😂

[@adiamsanchezphotography]

Bike lookimg good. Still need to go ride with you just been working to much.

[@Nmarquis]

you should grab a mtorocross or motorcycle helmet bro for those speeds and they have a visor and you can get cardo packtalk which is has speakers and a microphone. The motocross helmets do look badass tho.

[@E-bikeguy]

Ok bro, definitely on my list. To get one

[@vcancer]

What sup Brah. Get yourself motorcycle wheels for that bike if you're going highway speed. There thicker than that regular e-bike wheel and will last you longer. You can get the Shanko SR241 or the SR244 they will give your bike a better grip on the road and with turning. They also do better when it's raining. Believe me, I put them on my bike and will never return to those thin e-bike wheels again.

[@E-bikeguy]

Lol yes I been trying to get them for the longest but having some trouble

[@srichard8181]

@@E-bikeguy Agree with @vcancer, Do you know how to lace wheels? Not too hard just need 19" rims and some spokes - 2hrs work. I bought a used Surron wheelset - can be cheap. Changing MC tires is much harder but worth it.

[@E-bikeguy]

@srichard8181 yes I do, I'm doing som research now lol

[@vcancer]

I also forgot get bigger disc and brakes. They will last you longer.

[@Mash3OH3]

Or maybe some downhill tires. Those are thicker ish

[@davidanderson6222]

It is nice to be able to keep up with traffic, which I do sometimes too, lol but have to watch battery life. (Battery build next)And I do get stares going that fast in traffic. So I try to stay at 40 mph. Love these machines!! Btw, my bike colors are blue(favorite color)and black, hee hee! Yea, battery covers would make your bike look even better!! Stay safe bro!

[@E-bikeguy]

Yeah lol I try to keep it at 40mph , I wish I could get some plastic battery cover for my bike look way better lol

[@E-bikeguy]

Love the blue and black

[@jonathanbrunache3848]

E-bike guy man update since last time we talked about my 36v high power midrive build I made a few changes to the drive train and type of motor I’m using I’ve now decided imma use a alternator and convert it into a powerful brushless motor so far I have made a working prototype that runs and was abl to measure its max rpm and it’s kv rating it’s kv is 63.7 and will be using a torque converter instead of using the derailer it will be running 120 battery amps and 230 phase amps which my 36v battery can easily supply rpm is about 2293.2rpm unloaded at 36v and at 230 phase amps I used a calculator to determine how much torque the motor will approximately output 34nm of torque which goes thru the torque converter in first gear it’s a 9 to 1 ratio which is about 306nm of torque in first gear and in second it has a 3 to 1 ratio which is 102nm of torque in my last gear my favorite thing about this setup is it’s automatic and I don’t have to manually shift it and the gears going to the torque converter instead of using a chain system i switched it to a steel pinion to spur gear system so that the drivetrain is more durable on the motor side lastly to cool the alternator down I’m gonna be using statorade that’s used on hub motors to cool down my hub motor plus a water cooling sleeve made out of copper piping that’s connected to a recirculating radiator. Top speed is 60mph estimated: tell me what you think you’re committing always helps to give new ideas to this build thanks😄

[@E-bikeguy]

Wow, nice. Do you have a channel?

[@jonathanbrunache3848]

@@E-bikeguy no not yet only cuz I wouldn’t know where to start a channel

[@E-bikeguy]

@jonathanbrunache3848 oh ok would love to see your build

[@jonathanbrunache3848]

@@E-bikeguy when I finish it I’ll try send you finished video of my build explaining it in greater detail

[@E-bikeguy]

@@jonathanbrunache3848 ok

[@mljay3537]

You got a fantastic high speed bike there brotherman. Ive built my first ebike but I'm having trouble wiring an sw900 display to a dc motor ebike. Have you got any advice

[@E-bikeguy]

Email me at [e-mail]

[@KNEwasHERE]

So what is the range? and how much to make one for me?

[@E-bikeguy]

The range is a a lot and it depends on what you want

[@MichaelGolpe]

15:24 I’m a newb, but this may help: 1) dual or quad struts for each wheel, and, 2) dual or quad shocks for the handlebar assembly, perhaps the dual coils like some motocross bikes from the 80’s? They were chrome.

[@E-bikeguy]

Hum, you got me thinking, I'm going to do some research on that.

[@justinshields7501]

Ebike guy if you get a shorter stem your bike won't be so twitchy at higher speeds. Awesome video 👍

[@E-bikeguy]

Awesome. Thank you 💯

[@georgeforeman89]

That might be true for road bikes or MTBs, but going 50, 60, 70mph on a bicycle will always be twitchy. Maybe a steering dampener will be better than anything, but the bike simply wasn't meant for those kinds of speeds.

[@E-bikeguy]

@georgeforeman89 you is definitely right about that

[@justinshields7501]

​@@georgeforeman89do both

[@ebikeoutdoors]

Man great video love that your ghost peddleing at 50mph have you ever considered making some body panels instead of getting a battery bag you have built one hell of a fast as balls ebike that speed is epic I'm very interested to see that video about the surron thottle nice one man 👍 ✌ 🚵

[@E-bikeguy]

Yes I did consider a cover for the battery, lol I had to get some speed test out of the way otherwise I won't hear the end of it

[@ebikeoutdoors]

@@E-bikeguy I used plastic for sale bords to make body panels for my ebike and plastic from bread crates but the speed of your ebike is more than inpresseif and amazing how quick it accelerates I think it would give any ebike a good run for its money great job mate I'm looking forward to see the video about putting a sur ron throttle on your ebike 🚵👍✌

[@mA-ug5ts]

Sounds cool especially with how @ebikeguy welded the frame, which makes the bike look like his own, adding some panels would make it stealth and be his own desisn Crazy ebike I love to see that and buy one 😂

[@ebikeoutdoors]

@@mA-ug5ts if you have a look on my channel I have a walk around video of my homemade ebike with the panels I made it does make quite a difference ✌👍🚵

[@HostileHST]

10.7 HP for 8000 watts, but hey, that's around what some 125cc two strokes will do and your bike goes WAY faster on the top speed. I'd be curious what would happen if you went up against a 125cc dirt bike. Edit, so is it an 8000 watt being pushed beyond normal? I am confused, so many numbers were said, lol.

[@E-bikeguy]

We can definitely set that up lol

[@imho7250]

Yes, it’s not really a 8000w Ebike. Its a 26000+ watt Ebike with a 8000w motor. So it’s more like 35 hp for 30 seconds. The controller could probably push 30kw if the battery was fully charged such that voltage sag was only down to 72v. 73 MPH is as fast as we’ve seen it go, but it can go faster. The limiting factors are how much more can the motor take before it burns and how big Ebike Guys balls are that particular moment. Lol

[@E-bikeguy]

@imho7250 🤣🤣🤣 no balls here and the !battery was not fully charged when I did it, like 90% I think 🤔

[@imho7250]

@@E-bikeguy , I noticed with my little 27a ebike that full charge and cold motor and controller my first full throttle hits much harder than after the voltage drops a little and the motor and controller warm up. I think you might be able to push 30kw if fully charged but the motor is not going to like it. Lol

[@E-bikeguy]

@imho7250 ok I agree 👍 💯

[@FredRobles-v3h]

Have you don’t a range test yet !!!! And man this bike you made is sick keep up the hard work 🎉 !! 🚲 💨

[@E-bikeguy]

No have not did a range test yet but will be soon lol just don't know where to go with this beast of a battery lol

[@FreakyT333]

Holy dam man! Those speeds on those tires! Boy you are a wild man…

[@E-bikeguy]

🤣🤣🤣🤣💯 had to take one for the team

[@MichaelGolpe]

11:07 Sweet! You, sir, get my follow!

[@austinmiller9069]

If I want to start from scratch and build an 8,000w e bike what parts do you recommend and where can I purchase them at?

[@phillyd2018]

7:28 haha that phone is holding on for dear life, i recommend quad lock, however having a quad lock phone case would be annoying, they don't have the best feel

[@E-bikeguy]

Lol I see that wind was trying to rip the phone out of the holder lol

[@faridghu192]

Yo, I have so much fun watching your video. Stay safe 😮

[@E-bikeguy]

Heck yeah 💯 thank you😁

[@Masone126]

What is the name of the controller ? I think you said Far Driver?

[@E-bikeguy]

Yes, it's a fardriver nd72850

[@Masone126]

Can you install a display to this controller?

[@MarioMadness1]

You should get some motorcycle tires next ! pretty easy swap with the fat tires

[@E-bikeguy]

I know but what size I need?

[@MarioMadness1]

@@E-bikeguy like 110/80-16 (that's what powerful lithium installs in his one video.. also have seen 110/70-16 used)

[@MarioMadness1]

@@E-bikeguy Also have seen 120/80-16 from powerful lithium.. but that seems to be about that size you need for fat tire ebike rims

[@E-bikeguy]

@MarioMadness1 ok I'm doing some research as we speak

[@swifty040]

Is the hub motor made by nbpower?

[@Mash3OH3]

Holy thar battery is massive

[@michaelbuteau4183]

I just ran across your channel. Never seen it Before so I subscribed Seems like I could learn some Stuff and be entertained at the same time. Great Contact thanks Be looking forward to your next videos.

[@E-bikeguy]

Thank you so much 💯 I'll have some more coming soon

[@Busabuck100]

I envy your e bike knowledge, good video.

[@E-bikeguy]

Thank you so much 💯 still learning tho 😆

[@parrishholland9438]

You do a wonderful job and keep up the good work

[@E-bikeguy]

Heck yeah 💯, thank you!

[@ajones482]

What do you have to do to get it shipped in 5 days

[@E-bikeguy]

Pay for the fast shipping

[@roblucas9599]

bro i see you. have fun.

[@E-bikeguy]

Heck yeah bro 💪

[@technoking8386]

Def get a steering stabilizer I’ve had a tank slapper on a motorcycle and one on that bike and it’s almost 100% horrible crash. Nice bike!😊

[@E-bikeguy]

Thank you bro 💯 I get one for me and my kids bike as well

[@tocarules]

That back tire is going to rip right out of its moorings. 70 mph is absolutely out of this world. How about some PPE?

[@raytaylor9152]

Really impressive

[@hazza3651]

great vid quick question does the fardriver have variable regen? and also on the dkd display how do you wire the headlight indicator to the headlight switch?

[@E-bikeguy]

I don't believe the fardriver have variable regen but as far as the light goes I'll see I have the wire diagram

[@Trevd508]

Is that Williston Florida?

[@E-bikeguy]

It's in Avon park central Florida

[@geoffsutton78]

Are you able to put together a decent playlist of this build start to end? It's an awesome bike and would love to build one but don't have your tech know how to do it. If we had it in order that would be amazing (and binge watchable). Thanks.

[@E-bikeguy]

Yes I can do a play list, I'll see what I can do today

[@geoffsutton78]

Awesome. Thanks.@@E-bikeguy

[@parrishholland9438]

I wish I could have one

[@Big_foot44]

Is it possible to have frint and rear hub motors, i live in a tiwn with alot of hills ?

[@E-bikeguy]

Yes you can

[@djjohnpiazza7043]

Steady Mobbing!!! Datum!!!!

[@ijaripanju3408]

Man... loving your content and builds . Im a bit more a scooter guy but your info and builds are a boost to moral . Just wanna say keep doing what you doing 👍

[@E-bikeguy]

Thank you so much 💯 I'll definitely try my best to make great content 😄

[@stvsmith1791]

When I was younger, riding a motorcycle and taking a junebug between the eyes at 75mph damn well smartz. Thought I'd been shot 😂 left a knot on my forehead twice the size of the bug!

[@E-bikeguy]

Lol yes I know the feeling 😅

[@ajones482]

I want to visit you in Florida so bad to see your bike in person

[@E-bikeguy]

Heck yeah 💯

[@ProfessorSnape22]

I definitely need a bike like that for range and speed. I can handle it plus i love to travel alot.even long distances. Whats the miles on that demon?

[@E-bikeguy]

Just let me know!!! I got ya

[@ProfessorSnape22]

@E-bikeguy hows it going , whats your email ?

[@jamesbreedlove6396]

Add a fairing

[@victorthecarguy3126]

You build some nice bikes. Have you thought about something shaped like a fuel tank so you could use you legs to hold on when you're going fast?

[@E-bikeguy]

Thank you!!! But nit really, only because I don't really go this fast lol

[@paratrooperz1]

you have to be careful with these tires they are rated very low speeds and you can push tires to some degree but if your tire comes apart at 75 miles an hour the tire may bind in the wheel well an stop the rotation and send you over the bars and have a nasty road rash back tire much less risky

[@E-bikeguy]

I definitely agree with you 💯 probably will be keeping it at 40mph

[@parkersgarage4216]

omg i want a bike like yours my friend. how much do you have into the build? do you have tutorials for this stuff? i dont even know where to start. thats bad ass and i want one. especially one like yours w the speed and range for sure. any help is appreciated for sure. im currently rebuilding my 22 grom that got stolen. ordered up everything for it just waiting now. i gotta replace lh engine case on it as well. i gotta tear the whole engine apart to do so. once im done w that which will be soon. i want to start building something like this for sure. thanks in advance

[@E-bikeguy]

Heck yeah bro. Right now I got about 4,600 into it but you can do it a little cheaper tho

[@parkersgarage4216]

@@E-bikeguy thats 5 bucks more than my grom w abs when purchased new. it looks hella fun for sure. im going to look into this stuff further.

[@rodolfobaliga7577]

Seems your brakes sounds like an eighteen wheeler truck.

[@E-bikeguy]

They was a little loud. But they definitely good now

[@TheNewyorican89]

You mentioned you built it for range, do you know what thay number is? Im a new subscriber, you have peaked my interest! I'll be following closely

[@E-bikeguy]

Not yet but I think the range will be a lot lol , but thank you 😁💯

[@kelvinmarland6572]

Can you buy washers that you can connect to the frame to stop the wheel coming of when wheel spinning?

[@E-bikeguy]

I believe so on ebay, but I modified my torque arm to fit the frame of the bike

[@kelvinmarland6572]

@@E-bikeguy do you know what they are called mate please

[@kelvinmarland6572]

@@E-bikeguy i think I might need to add some spacers or some washers because there still alot of space and that why it is springing of like it does it could be dangerous if done properly

[@kelvinmarland6572]

@@E-bikeguy mine a fatbike with 26/4 wheels so the back wheel is heavy I've had to fabricate the frame in to a hard tail to support the wheel

[@sekaf4125]

dude your awesome! are you familiar with the Aventon Aventure? Im going on 1,600 miles on it and would love more power! Great Video

[@E-bikeguy]

Ok if you want I can help you out

[@jayhoody121]

I need 110 miles to a charge atleast , i do food deliveries

[@lanceboudreau3630]

Could you tell me what parts you used to make this bike or how you made and what the cost it was to make. Maybe make a parts list

[@E-bikeguy]

It a 26x4.0 fat bike from Amazon, for 300, qs273 for 750, fardriver nd72850 with display from 480, 260 molicel p42a for 1300 .

[@akmw44]

Whats the make and price pls

[@E-bikeguy]

The price me building it was 4,500

[@HostileHST]

After being told the actual power output, I got this to say, DAYUM!!! Suicide much? lmao!

[@E-bikeguy]

🤣🤣🤣🤣🤣💯

[@ElectricScooterMan]

Omg wow it’s better than a SurRon. I have a question, what speed app is that you using because I can’t find it,

[@E-bikeguy]

It's speedometer from cool links on the play store

[@ElectricScooterMan]

@@E-bikeguy ahh I’m still trying. I have an iPhone

[@E-bikeguy]

@ElectricScooterMan oh its for goggle lol

[@ajones482]

I still can't find the 26" fat qs 273 8k..can you link that for me

[@E-bikeguy]

s.click.aliexpress.com/e/_mrxnE9G

[@obeii1805]

I need to figure how to upgrade my cty2

[@E-bikeguy]

Lol heck yeah, I'll go with a 45a controller, that should get you going

[@obeii1805]

@@E-bikeguy definitely a superior controller, battery, brake system. I can cash u for zoom installation instructions cus I don’t know how

[@E-bikeguy]

@@obeii1805 email me at [e-mail]

[@gospelninja2.016]

you need some mirrors brother. knowing what on your left is really much needed.

[@E-bikeguy]

Yes definitely I do I'm going to grab some soon

[@Yungbrian831]

I have a electric motorcycle and I want to buy a 12k hub lol

[@E-bikeguy]

Heck yeah 💯 🙌

[@OctaneAndAdrenaline]

Would this thing be able to haul around a 1000 pound trailer? I need an answer please🙏🏽

[@E-bikeguy]

Lol it could I might try to see if I can pull a car

[@OctaneAndAdrenaline]

@@E-bikeguy that would be awesome because I’m going to buy an electric bike and make it this powerful but it’s going to be pulling around a landscaping trailer so I need to see how big of a mower it can pull

[@E-bikeguy]

@masscarspotting5682 oh ok if you do get the qs273 5t best motor for pulling a trailer

[@OctaneAndAdrenaline]

@@E-bikeguy compatible for any e-bike?

[@E-bikeguy]

@@OctaneAndAdrenaline I don't know about that 🤔

[@Jay-tr3px]

Hi ebikeguy. Nice speedster e-bike! Can you please tell me the hub motor that you're using and the controller that you have for it? And does it come with 20-3 inch wheel?

[@E-bikeguy]

It's a qs273 hub motor 3.5t fardriver nd72850 26x4.0 wheel but you can get it in 20in

[@Jay-tr3px]

@@E-bikeguy Thank you Ebikeguy. Much respect brother and keep the good work coming!

[@E-bikeguy]

@Jay-tr3px ok no problem 😁

[@jesusmartinez-dy1ue]

CHINGOOON RIDE

[@gtjust8188]

I've literally just bought that throttle 👌 is it any good?

[@E-bikeguy]

It great, I just want something that I can put actual grips on

[@EddieED711]

Is there a way to make a heybike cityscape faster then 19 mph?

[@E-bikeguy]

Oh heck yeah you can but first I would suggest if your controller can be shunt mod 😉

[@EddieED711]

@@E-bikeguy I have no knowledge of e-bikes, what is shunt mod? I think the controller sit under the battery where the battery slide under the seat. would the controller need to be replaced, and if so what controller would i need and where would i order from. Thanks man . Im here in Fl to, Sebastian.

[@E-bikeguy]

@@EddieED711 www.ebay.com/itm/305135588130?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=evwhr9jbtbw&sssrc=4429486&ssuid=g6yfcireqc2&var=&widget_ver=artemis&media=COPY

[@MagicTheMastiff]

Thanks great video. ❤❤❤🎉🎉🎉

[@E-bikeguy]

No problem 💯😁

[@salviaaable]

the throttle feels so cheap, want to upgrade for myself thinking about that :D

[@charleshowell6442]

That's what I want to see. Riding and stats so I can get ideas on what and what not to do. ❤

[@E-bikeguy]

Heck yeah I'm going to do some more like this soon

[@cornellgarland5018]

have you done a range test per charge at an preferred speed? if so how many miles did you do?

[@E-bikeguy]

Not yet I'm going to do it on a up coming video but the stuff it do around my neighborhood I can go a week on a single charge

[@cornellgarland5018]

@@E-bikeguy that's great. this may be thinking ahead too soon but, what about a charging port same as electric cars plenty of places to charge up on your travels. GAME CHANGER!!!!

[@E-bikeguy]

@cornellgarland5018 I don't know but you do have a idea that needs to be put in R&D

[@cornellgarland5018]

hey bro just saw this other video 'lyric cycles" their ghost model has that ev charging port. but still a game changer for you and the family.

[@E-bikeguy]

@@cornellgarland5018 nice can you send me a link?

[@MrDeceptacon88]

Hi do you have a link of the stabilizer?

[@E-bikeguy]

I see one on Amazon but I don't know how to mount it up

[@MrDeceptacon88]

@@E-bikeguy whats the name of it?

[@E-bikeguy]

@@MrDeceptacon88 Krace CNC Motorcycle Steering Damper Stabilizer Linear Fit Yamaha YZF R1／R3／R6／R15／R125／R25 FZ1 FZ8 FZ09 MT09 GSXR 600 750 1000 GSX1300R CBR600RR 1000RR CB400 CB1000 ZX6R ZX14R a.co/d/4lH9XI0

[@DadRandom]

You need a windscreen 😅

[@E-bikeguy]

Heck yeah 💯 that wind is nutz

[@RJ-xb7ly]

Did u build this

[@E-bikeguy]

@@RJ-xb7ly yes I did

[@RJ-xb7ly]

@@E-bikeguy wow that's friggin insane man how ur bike speeds up like that that's crazy!!!!

[@BuySellTrade-g7i]

I just bought a jansno can you build it to go that fast if so how much? I’m very interested

[@BuySellTrade-g7i]

I’m from New York I will drive my shit way down there just to get this done

[@E-bikeguy]

Email me at [e-mail]

[@BuySellTrade-g7i]

Let me know when I should start giving you money for parts?

[@E-bikeguy]

@NGUFlips you can can start whenever you want, I do pay pal

[@BuySellTrade-g7i]

@@E-bikeguy how does this process work

[@JewishSpy]

Need some mirrors 😌

[@E-bikeguy]

Oh yeah I was thinking that when I was on the highway

[@eduardodanielpulidogomez5543]

How many volts and amps is your battery friend

[@E-bikeguy]

It's on 72v and about 420dc amps

[@andytang462]

How fast do you think your bike would be if you kept the motor and battery the same but used a Sabvoton 72200 instead of the fardriver?

[@E-bikeguy]

About 65mph

[@andytang462]

@@E-bikeguy wow that’s probably such a big difference!

[@E-bikeguy]

@andytang462 yes lol it's a big difference. I had both

[@ajones482]

Where did you order your qs 273 from

[@E-bikeguy]

ND Ebike Factory Store a.aliexpress.com/_mOKamg2

[@mickyb.8014]

Yeay!!! I get it, you're going fast and getting the speed wobble, hmm, yeah some kind of stiffening up device is needed... But how to do that is the question eh?!? Maybe some sort of hooks from the handlebars that can be slided up either side to attach/hook onto the top front part of the frame to essentially make the steering locked perfectly straight... One thing i know is you for sure cant turn the bars when going at speed it's all about leaning to turn a little.. It's a tricky one.. Id say you defo need road speed tyres without the knobbly bits on them, thats why I went for the Schwalbe 'marathon' tyres, they seem to be more suited for speed tommy (not that mine goes much above 30mph though) but for yours you'd need 'speed' tyres..

[@ianmangham4570]

Motorcycle STEERING DAMPER 😮

[@E-bikeguy]

I'm going to try and see what I can come up with lol

[@E-bikeguy]

@ianmangham4570 yes lol I'm on it

[@ianmangham4570]

@@E-bikeguy I wouldn't think you need one ,its not like your constantly doing 60mph ,but if you want one there's some light weight alloy ones around $50 🤠🤘

[@E-bikeguy]

@ianmangham4570 ok you is right I don't think I'll be going fast like that but I'll check it out tho

[@YouTubeCommentator.]

Youre not worried the tires will fall off?

[@E-bikeguy]

Not in the slightest, so far I fid 83mph on them

[@YouTubeCommentator.]

@@E-bikeguy hooooly...😅 Is the front wheel assembly some kind of high speed bearings kit? Or could I do that to mine to? Maby you could recommend a good bike to build on? I already modified my Coopop Rugged e-moped. But I would love some much bigger tires and shocks

[@E-bikeguy]

@KZbinCommentator. ok I will, I'll be in the process of a nother build and I'll do a step by step process. This outroad fat tire mountain bike I built on has been nothing but solid, I got it off of Amazon

[@BuySellTrade-g7i]

Please build me one of those how much you charge?

[@E-bikeguy]

I can build one for 6,500 ready to go lol

[@BuySellTrade-g7i]

@@E-bikeguy that includes the bike correct?

[@E-bikeguy]

@@BuySellTrade-g7i yes 6,500 for all

[@ajones482]

How long does it take to get your order

[@E-bikeguy]

I paid fast shipping so about 5 days

[@nicod974]

Did you ever found out why the sabvoton burned?

[@E-bikeguy]

It still a mystery lol

[@nicod974]

​@@E-bikeguyyou should send it to debodgery, he'll know

[@richie8214]

Thats a beast . Wear gloves mate

[@_Listen2Learn]

So I have a 15000w qs273 2.5T with a Sabvaton200A, BMS150A, and 72v70ah battery. Top speed is 70mph and I weight about 200lbs. Should I be able to go faster?? My goal was range with the 2.5T motor but I feel like I should be able to hit top speed quicker. Thanks for the vids buddy keep them coming! @E-bikeguy

[@E-bikeguy]

The problem is the controller, I would recommend the fardriver controller 72680, the sabvoton 72200 is small on amps so it hard to just hit 65mph but that controller 72680 will get you over 70mph

[@_Listen2Learn]

Thanks man I was thinking fardriver too. I appreciate the response. Love the videos man I Subscribe 🎉

[@E-bikeguy]

@MrjohnnyD3 thank you so much 💯

[@_Listen2Learn]

@@E-bikeguyalso could you recommend somewhere I could purchase the fardriver controller. Ali express or somewhere else?

[@E-bikeguy]

@@_Listen2Learn ok go to fardriver. Com and you will see the download icon

[@Thewhippedhippie]

That bike badass

[@E-bikeguy]

Thank you so much 💯 it's definitely awesome

[@DadRandom]

Literally a bike you can ride in California traffic

[@E-bikeguy]

🤣🤣🤣🤣yes you can!!

[@JustMe-fs2yh]

Do you really need a ebike that can go 70-80 mph ? Only if I can't find one that will do 120-150 mph 😂😂 🚴‍♂️💨💨💨💨💨💨💨💨

[@E-bikeguy]

🤣🤣🤣🤣 OMG

[@ebbikerides8608]

Ebike takeover

[@E-bikeguy]

Had to take one for the team 🤣🤣

[@freeduel]

Can battery cells get re use

[@E-bikeguy]

It depends tho at battery hookup. Com

[@freeduel]

@@E-bikeguy thanks

[@E-bikeguy]

@@freeduel no problem 😊

[@Uwe342]

is it a big different compared to the 205 ?

[@E-bikeguy]

Oh definitely

[@mA-ug5ts]

Have you tried the 205 with the fardriver?

[@E-bikeguy]

@mA-ug5ts I will soon as I upgrade my son's controller

[@mA-ug5ts]

@E-bikeguy great thanks for a speedy reply your channel is growing nicely

[@E-bikeguy]

@mA-ug5ts heck yeah bro I didn't imagined it either

[@jamesbreedlove6396]

Dude can I have your bike!! So frickin AWESOME

[@E-bikeguy]

Lol heck yes, sell it to you for the low lol

[@soyboy899]

what would happen to you if the bike tyre popped going at 70mph ? bikes tyres are a lot more fragile than motorbike tyres, the rubber hardness is much softer on a bicycle, you need to put some puncture resistant tape inside, or go tubeless..

[@E-bikeguy]

🤣🤣🤣🤣 I hope not to find out lol but working on getting some moto tires

[@soyboy899]

@@E-bikeguy moto tyres will have more psi probably, will be a harsher ride, but i reckon you will gain another 1 or 2 mph top speed

[@E-bikeguy]

@soyboy899 yeah on the rear I have it at 18psi and that gives me some cushion but we will definitely see tho

[@soyboy899]

@@E-bikeguy goodluck and enjoy, i just have a bafang m620 1500w bike, it's all integrated in to the bike frame, but still gets up to 37mph on a flat, the juice runs out quickly with a 17.5ah battery, I guess the benefit of your one is that the direct drive motor is more efficient, you could use it all day long at lower speeds... never have to pedal... for most users when you struggle going up a hill, you appreciate the E bike more, where others would have to dismount

[@isawit9722]

Bro... you could sell that gold... cousin

[@E-bikeguy]

🤣🤣🤣💯 right!!