This Bolt is Broken... I Make a New One! Machining Left-Hand Thread

  Рет қаралды 570,067

my mechanics insights

my mechanics insights

Күн бұрын

Пікірлер: 929
@nospin1394
@nospin1394 3 жыл бұрын
Unfortunate your lathe bearing is near its end but you know it would make an interesting episode to replace…yes?
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Indeed, but I think I probably won't. It works fine for normal use, so far ;-)
@rnp497
@rnp497 3 жыл бұрын
next restoration video - your lathe
@Eriiaa
@Eriiaa 3 жыл бұрын
My lathe is broken - I make a new one
@rexaitken
@rexaitken 3 жыл бұрын
@@mymechanicsinsights my method to deal with chatter on form cuts is to take the final pass turning the spindle by hand and feeding in tiny amounts. Works brilliantly. What lathe do you have? I'm not really surprised it chattered on a form cut like that in steel, don't worry about spindle bearings!
@chrisstephens6673
@chrisstephens6673 3 жыл бұрын
If the lathe is old there is probably a good chance that the bearings are adjustable. If not bearings, it could be the chuck jaws are bell mouthed and need recutting.
@HansSiemons
@HansSiemons 3 жыл бұрын
Wonderful to see such a wonderfull long video on a "single part", and see all the details that go into making it!
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Thanks Hans, I'm glad you like it. A real insights video ;-)
@smashyrashy
@smashyrashy 3 жыл бұрын
As a machinist i know and appreciate the work that goes in to every part that he "makes a new one"
@theodaniels7273
@theodaniels7273 3 жыл бұрын
The only man with an M16 left handed thread Guage ring
@ermannopinotti9922
@ermannopinotti9922 3 жыл бұрын
Actually there aren't left-handed M16 gauge rings for sale in the whole world. He made a new one.
@merlinch4256
@merlinch4256 3 жыл бұрын
No, he says he borrowed it from a local company :-)
@jonmcs
@jonmcs 3 жыл бұрын
@@ermannopinotti9922 Have one at my work... 😌
@DrLoverLover
@DrLoverLover 3 жыл бұрын
Woosh
@ArniVidar
@ArniVidar 3 жыл бұрын
Thanks for giving us some of that real-time view. And thanks for not making us watch all of it in real-time! :D
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Yeah haha. It's a real shame that this lathe doesn't has a spindle brake. It takes ages for one pass with those slow rpm's.
@PointlessMiracle
@PointlessMiracle 3 жыл бұрын
Next video: making a spindle brake for my lathe
@anqied
@anqied 3 жыл бұрын
@@mymechanicsinsights couldn't you have done it faster on the left hand thread, since you didn't have to worry about running into the hex?
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
@@anqied when i run backwards i have the same problem
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
@@PointlessMiracle thought about that already
@mykeg2401
@mykeg2401 3 жыл бұрын
Love the behind the scenes look at “I make a new one” process very cool.
@kjamison5951
@kjamison5951 3 жыл бұрын
YT: “My Mechanics Insights has released their latest video.” Me: “I watch a new one!”
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
I hope you like it
@fizmat2009
@fizmat2009 3 жыл бұрын
Lol
@FriedHam
@FriedHam 3 жыл бұрын
* After wathcing the latest video * Me: I watch old ones again!
@ohorlando1187
@ohorlando1187 3 жыл бұрын
It’s a good day when a vid like this one drops. We are in danger of losing such skills in the future. Love the content.
@Slasho58
@Slasho58 3 жыл бұрын
This is the first time I see a sketch well done, as a teacher this makes me happy
@thilo_117
@thilo_117 2 жыл бұрын
by the way, not only your craftsmanship is on another level but also your video-editing skills are awesome
@yalebaker7976
@yalebaker7976 3 жыл бұрын
Amazing that a 60 year old lathe is still that accurate. Weiler should be proud. Everything you do is a work of art and this turnbuckle bolt is no exception. It’s beautiful!
@misterpatina
@misterpatina 3 жыл бұрын
12 minutes and 54 seconds of pure satisfaction!
@TysyTube
@TysyTube 3 жыл бұрын
🔥🔥🔥
@KazK-vi6xn
@KazK-vi6xn 3 жыл бұрын
hi mr tysy i love ur videos
@pierresalve
@pierresalve 3 жыл бұрын
la démonstration à la fin est bluffante! terribles vidéos aussi TysyTube!
@AdmiralFace
@AdmiralFace 3 жыл бұрын
Why do you paint rust/dirt in your videos? I can not watch, it makes my face pucker.
@thomastallis8819
@thomastallis8819 3 жыл бұрын
The Mozartean clarity of this creation belies its stunning beauty. This is pragmatic art of the highest level. No moving parts -- and yet, for me, this special bolt is a minor masterpiece. Bravo!
@elizabethturner2421
@elizabethturner2421 3 жыл бұрын
Until you wrote it, I had been searching for the right adjective to describe MM's work. Mozartean it is! Thank you for putting your finger on the right word--and for writing such an elegant description.
@gustavogarcia3515
@gustavogarcia3515 Жыл бұрын
Absolutely.
@Aleksander_Grigorjev
@Aleksander_Grigorjev 3 жыл бұрын
Greetings from St. Petersburg! You said: "I hope you like my work and the video." You don't have to hope, you MUST KNOW that your work evokes the most positive emotions in normal people. Your videos can help normalize blood pressure and reduce fatigue and aggressiveness. And whoever does not agree with this - let him go to hell.
@andrepaio7751
@andrepaio7751 3 жыл бұрын
Fully agree. Greetings from South America.
@nendongosimeonn6375
@nendongosimeonn6375 3 жыл бұрын
He hoped because there is 8 people who thumb down this clip. So he's right to hope.
@Aleksander_Grigorjev
@Aleksander_Grigorjev 3 жыл бұрын
@@nendongosimeonn6375Sick people (8 units). What to take from them, except for tests, and even then bad ones.
@Aleksander_Grigorjev
@Aleksander_Grigorjev 3 жыл бұрын
@@andrepaio7751 Hi, Andre!
@jreese8284
@jreese8284 3 жыл бұрын
Oh, St. Petersburg, I'm laughing here in Wisconsin!
@ArKritz84
@ArKritz84 3 жыл бұрын
"Lathe is old and chatty. I am neither. I make a new one!"
@Slimboy025
@Slimboy025 3 жыл бұрын
It will be hard making a lathe on a lathe xD
@anantsaiasthana2643
@anantsaiasthana2643 3 жыл бұрын
et voilà!
@jackcheefer
@jackcheefer 3 жыл бұрын
making a new lathe with a defective lathe? I'm wondering how he does...
@michaelbodo2022
@michaelbodo2022 3 жыл бұрын
@@jackcheefer every new machine is build on an „old one“, absolute no prob… 💪🏻
@arty7122
@arty7122 3 жыл бұрын
@@jackcheefer it would probably be possible, even tho really expensive and kinda impractical to make your own lathe.
@petevanderley4705
@petevanderley4705 3 жыл бұрын
What a great video. I was about to close my laptop and noticed your video. Good reason to relax and enjoy for 13 minutes. Perfect end of the day for me here in Malaysia
@rdjess
@rdjess 3 жыл бұрын
I’ve been following your main channel since ~10k subscribers, and your content still continues to amaze me. Perfection!
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Nice to hear that, thanks a lot
@theeagle8652
@theeagle8652 3 жыл бұрын
This guy is so skilled it's almost offensive 😄
@brendanstempski8292
@brendanstempski8292 3 жыл бұрын
I was offended. Time to tweet about it
@theeagle8652
@theeagle8652 3 жыл бұрын
@@brendanstempski8292 rock on dude 😁👍
@AtlasReburdened
@AtlasReburdened 3 жыл бұрын
**Clickspring:* Has joined the chat.
@rewlazman
@rewlazman 3 жыл бұрын
Can't wait till you make a new lathe. Seriously though, watching you make a bolt is better and more entertaining than most of the videos on KZbin. 👍
@Erastus_Ralte
@Erastus_Ralte 2 жыл бұрын
Whatever you do your fastidiousness and painstaking make your work perfect and interesting. I like your work so much
@treyjohnson6169
@treyjohnson6169 3 жыл бұрын
Can’t wait to see the new video on the insights channel. Opening line my lathe is broken, “I make a new one.” Love seeing the whole process in making something that most people wouldn’t think a second thought about. 👍👍👍
@joemahma9069
@joemahma9069 3 жыл бұрын
I just know THIS kind of craftsmanship is gonna' get me into Divorce Court! This gentleman's skill has inspired me to buy that lathe I've been fanaticizing about for eons! Thanks a LOT, sir!
@tracybowling97
@tracybowling97 3 жыл бұрын
I never knew watching a bolt being made could be so fun. This was a great episode!
@mahina1963
@mahina1963 2 жыл бұрын
I love it when you write..."I make one"! They look like jewels. Mechanical jewels.
@jonathanfox1
@jonathanfox1 3 жыл бұрын
I hit 'like' the moment you started sketching. So great to see the whole process! Well done that man.
@Vatharian
@Vatharian 3 жыл бұрын
That's 'just a bolt'. Yet it took a skilled mechanic probably two hours to make. This is why I treat my tools, fasteners and machines with care and respect. And I like to think they respond in kind, and last longer and give me a chance before they break.
@nathanbinns6345
@nathanbinns6345 3 жыл бұрын
By the way, since you said your lathe is getting old, do you think you could get a sponsorship for a shiny new lathe on your main channel? You've got almost 2.5 million subs now so maybe it is possible, certainly you wouldn't be the first engineering channel on youtube to get given extremely expensive shiny new tools by sponsors.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
That would be amazing
@rexaitken
@rexaitken 3 жыл бұрын
Unless you have a lott of Money, new lathes don't compare to the quality of old ones
@ThePanickedMonk
@ThePanickedMonk 3 жыл бұрын
Or at least maybe something from Scotch Brite :)
@michaelbodo2022
@michaelbodo2022 3 жыл бұрын
@@mymechanicsinsights hopefully this is not a realistic option for you, please do not replace it with a new one. This old machines have a heart and worth to earn the love and maintenance they need to keep on going ❤️
@arty7122
@arty7122 3 жыл бұрын
@@rexaitken exactly, the new ones are usually crap, and if they aren't the price tag would give you a heart attack
@electronicengineer
@electronicengineer 3 жыл бұрын
You sir are an absolute Master of your craft. I have nothing but the utmost respect for you and your skills. Thank you so very much for sharing your expertise with all of us on KZbin. It always makes me happy to watch you work your "magic". Fred
@Zimiorg
@Zimiorg 3 жыл бұрын
"Babe, come to bed
@wahyuiskandariah6807
@wahyuiskandariah6807 3 жыл бұрын
that's a good one... 😂😂😂
@obijuan232
@obijuan232 3 жыл бұрын
You made my day. LOL!
@sergioguerra1246
@sergioguerra1246 3 жыл бұрын
Are you still alive? :):):)
@expatmoose
@expatmoose 3 жыл бұрын
@@sergioguerra1246 now that’s the ultimate question
@dangerous8333
@dangerous8333 3 жыл бұрын
Damn bro, you tell your girl to STFU? You'll be alone soon.
@AgentMattox
@AgentMattox 3 жыл бұрын
This might be a little presumptuous of me, but in my opinion you are the most skilled person at this of anyone I have seen. I can't get enough of your videos. You have such care for your art.
@fredschaves
@fredschaves 3 жыл бұрын
Awesome video! Would love to see more of these indepth "I make a new one" regarding specific parts!!
@pfadiva
@pfadiva 3 жыл бұрын
Your hot bluing is always lovely. It looks better than anyone else's that I watch.
@TamiyaPhilippW
@TamiyaPhilippW 3 жыл бұрын
Is there a video of you explain your "story"? How it all started, what you did for living earlier/did you learn this stuff or did you teach it by yourself? Your skill range is just crazy !
@rickmoore
@rickmoore 2 жыл бұрын
I really appreciate the extra commentary on why and how you are doing each step, very informative Thanks
@freirecristiane
@freirecristiane 3 жыл бұрын
Hi Mr. Mechanics! I really appreciate that you made this video showing your "method", from sketch to final test. In a complete restoration video you make is seems so quick and easy, and I think it's one of the things that amazes me. And a 60yo lathe? Wow! Have you ever showed it and the whole workshop? I've really like to see it. This video proofs how very much talented you are. Kudos from your big fan from Brazil 💜
@Vickie-Bligh
@Vickie-Bligh 3 жыл бұрын
How fascinating to see how left & right hand threads are machined. You are such a joy to watch, MM. Thanks for the education.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
You are so welcome!
@nathanbinns6345
@nathanbinns6345 3 жыл бұрын
I feel like this is the first time I've seen you do something that you would actually do in your regular day-job as a machinist, remaking custom parts for machines that need them (I'm guessing you don't repair a lot of coffee grinders at work...or hey actually maybe you do, I honestly don't know a whole lot about machining)
@mr_effff
@mr_effff 3 жыл бұрын
I would love a video about your workshop cleaning routine - particularly how you collect all the metal shards!
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
With a vacuum cleaner :-)
@mr_effff
@mr_effff 3 жыл бұрын
@@mymechanicsinsights 😃
@garygenerous8982
@garygenerous8982 3 жыл бұрын
Next up on MyMechanics: MyMechanics lathe is getting worn out, watch him make a new one with not one 90 degree corner anywhere in sight and so shiny that it must be kept in a Vandablack room at all times else it blind the entire population of Switzerland and rase global temperatures by 5C. This whole process will take 6 hours and be condensed down to a single 30 minute video astonishing all and making all other KZbinrs gnash their teeth with jealousy.
@joannaatkins822
@joannaatkins822 3 жыл бұрын
Gorgeous, quality work as per usual! I am pleased that so many people appreciate your philosophy and attitudes. Simple machinery can be beautiful
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Thank you very much!
@warbirdwf
@warbirdwf 3 жыл бұрын
The best part for me of your restoration video's is when you use the lathe and milling machine. You should do more videos of just making parts on them. It would also be interesting to know what metal you're using when you make a part. Example, are you using 4140 steel? You really do beautiful work, especially on that 60 YO lathe.
@jochenstacker7448
@jochenstacker7448 3 жыл бұрын
This simple bolt once again shows that really great engineering is indistinguishable from art.
@RoelfvanderMerwe
@RoelfvanderMerwe 3 жыл бұрын
My favorite 5 words in the world! "I make a new one"!!!
@alanpreston3111
@alanpreston3111 Жыл бұрын
As a person who knows nothing about engineering, that was amazing , thanks 🙏🏻
@govinddddddd
@govinddddddd 3 жыл бұрын
It's really heartwarming and oddly satisfying ❣️😊
@keredrellit3992
@keredrellit3992 3 жыл бұрын
a friend hands you a broken bolt you give him a work of art back! gorgeously done!
@YamahaYZFR6RJ05
@YamahaYZFR6RJ05 3 жыл бұрын
A new video. Today is going to be a good day.
@SarvagyaB
@SarvagyaB 3 жыл бұрын
You are the best! My wife and I celebrate your videos.
@nit-Inundate
@nit-Inundate 3 жыл бұрын
Should you be quenching in a glass container? Wouldn't the temperatures break the glass?
@Tombsar
@Tombsar 3 жыл бұрын
I worried about that. Maybe it's borosilicate glass? Very resistant to thermal stress.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Well, you saw that it didn't break ;-) It's just normal glass
@Deweyfd13
@Deweyfd13 3 жыл бұрын
The amount of oil is enough that the temperature of the part will dissipate all its heat energy long before the glass can get any significant amount of heat applied to it. No risk of it breaking with what he is doing.
@AcmeRestorations
@AcmeRestorations 3 жыл бұрын
He's only heating it to like 600F to turn it black. Which doesn't require quenching at all. To harden steel you have to get up to 1400F and then quench it fast. And when you quench hardened steel, you need a LOT more oil than he is using. This is only for show. All he did was make the part oily. Beautiful machining, but this part is just nonsense.
@Vickie-Bligh
@Vickie-Bligh 3 жыл бұрын
@@AcmeRestorations You need oil to make the bluing stick. Otherwise it will peel off.
@budaniamanish5177
@budaniamanish5177 3 жыл бұрын
First i watched this video on Facebook now watching again on KZbin. Your work is so satisfying dude😍
@therealdojj
@therealdojj 3 жыл бұрын
Always wondered how you cut threads on a lathe, can you do a video explaining the system please? Thanks 👍
@malenapinkham4147
@malenapinkham4147 2 жыл бұрын
The compressed air clearing away all the shavings has become my new favorite thing in these videos🤩
@FOG2006
@FOG2006 3 жыл бұрын
Will the next restoration project be your 60-year old lathe? This would be a nice saga.
@MrMadreko
@MrMadreko 3 жыл бұрын
I think this bolt looks better than the one your friend had in original. And will last for sure longer. Thumbs up. 👏👏👍
@FreezinFury
@FreezinFury 3 жыл бұрын
To stop chatter PLACE A BIT of wood above the work piece on the outside dia. But if you have already chatter remove it by stopping the spindle and dig into the chatter manually by rotating the spindle a few turns by hand .
@BobbyJHeupel
@BobbyJHeupel 3 жыл бұрын
There's something so endearing about seeing someone whose work I admire dealing with the same issues I do in my home shop. You're wonderful at what you do and I'm personally offended (haha) that your lathe wants to stand in your way.
@plunder1956
@plunder1956 3 жыл бұрын
I'm surprised that you already had an M16 left hand thread guage in your equipment drawer. Lovely job. What steel did you use for this part? What was the broken system for? It looks agricultural.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
I borrowed the gauges from a local company. I used ETG100. It was some kind of a press or metal shear.
@plunder1956
@plunder1956 3 жыл бұрын
@@mymechanicsinsights i wish I had access to a small set, so useful.
@BigSkyCurmudgeon
@BigSkyCurmudgeon 3 жыл бұрын
a set of thread gage wires would be just as good to get perfect size threads. it isn't rocket science
@zrodger2296
@zrodger2296 3 жыл бұрын
A nice and unexpected balm for a Tuesday morning. Thank you!
@StuPedassol
@StuPedassol 3 жыл бұрын
Dammit, I thought you just eyeballed everything. 😄
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
lol
@lukasrgl
@lukasrgl 3 жыл бұрын
Gut, dass wir CNC Maschinen haben, aber konventionell Fräsen und Drehen ist einfach das beste! Ich liebe es :)
@ducksauz
@ducksauz 3 жыл бұрын
Very nice remake. Curious... Did you make the thread gauge rings or were those shop bought? They look like they'd make a nice practice project for turning threads and knurling.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
The gauge rings are borrowed from a local machining company. They are super accurate, hardened and its thread is surface grinded.
@Hoodalump
@Hoodalump 3 жыл бұрын
@@mymechanicsinsights AKA super expensive.
@DolezalPetr
@DolezalPetr 3 жыл бұрын
You cant really make a thread gauge with just a lathe....
@Tombsar
@Tombsar 3 жыл бұрын
@@mymechanicsinsights I can't figure out how you would surface grind an internal thread like that... Any insight?
@passthrujr5
@passthrujr5 2 жыл бұрын
@@Tombsar you don’t. We make them at work all the time. Rough turned in annealed material, then hard turned after heat treat to spec. There’s no reason to grind a thread gauge for average tolerance threads. There’s some super special grinding equipment for doing very tight tolerance gauges but it’s definitely not a surface grinder…. They are mostly CNC tool and gauge grinders made for that specific purpose. But yes. You can absolutely make standard gauges on a lathe, even a clapped out manual lathe if you know what you’re doing.
@andrewschoedel5699
@andrewschoedel5699 3 жыл бұрын
I genuinely can’t fathom the machining skill on display in your videos, I love it
@MrLeroyFox
@MrLeroyFox 3 жыл бұрын
I like your clean hands. People who do such amazing things usually have black dirty hands.
@kuplung22
@kuplung22 3 жыл бұрын
Nothing wrong with dirty working hands.
@dangerous8333
@dangerous8333 3 жыл бұрын
Lmao... Yeah, cause most of us are focused on getting work done and not keeping our hands clean for a KZbin video... Good grief.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
lol, absolutely true. mine are dirty off camera too
@AabluedragonAH
@AabluedragonAH 3 жыл бұрын
@@mymechanicsinsights someone appreciates the lengths you go through to have clean hands during a video haha
@randysmith3828
@randysmith3828 3 жыл бұрын
It is still amazing and satisfying to watch a piece of metal turned on a lathe and made into something useful. I worked in a machine shop in high school sweeping the floors, I’ve seen first hand the time and the knowledge that goes into this kind of work. Thank you for sharing your skill with us.
@BrooksMoses
@BrooksMoses 3 жыл бұрын
Me, watching you checking the M16 right-hand thread with a standard gauge ring: Ah, indeed, but how will you check the left-hand thread? It's not like you'd have a left-hand one just lying around. Me, watching you checking the M16 left-hand thread: Oh. Well, that was silly of me to think that! (Me later: I suppose I should have read the full description!)
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
;-)
@yanbianchini
@yanbianchini 3 жыл бұрын
Always a pleasure to watch your videos, congratulations on the work. Greetings from Brazil
@xTheZapper
@xTheZapper 3 жыл бұрын
If someone like Abomb or This Old Tony was making that they'd probably use a 4 jaw chuck, it always seemed like a massive pain to me but apparently the reason being that 3 jaws don't always centre properly, so when you flip the piece over the two ends might not perfectly align. This obviously seemed to come out fine, but would you use a 4 jaw if tolerances were really tight?
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
3 jaws are running true in around 0.3mm max. But you can always center it perfectly with a few light hits with the nylon hammer and dial indicator. I think the 4 jaw is an american thing. I have never seen anyone in real life clamping a normal round part in a four jaw, only on youtube.
@xTheZapper
@xTheZapper 3 жыл бұрын
@@mymechanicsinsights Interesting, thanks!
@timrankin8737
@timrankin8737 3 жыл бұрын
My dad made me learn on a 4 jaw chuck. What a pain in the azz. Yes i am in america. If dad was still alive i know he would love this channel.
@elizabethturner2421
@elizabethturner2421 3 жыл бұрын
Thank you for sharing your gift with us. I've only recently become fascinated with machine tools and the machinist's art, and your videos only heighten my appreciation. Thanks again from an admirer in the US
@swebigmac100
@swebigmac100 3 жыл бұрын
It must be a good friend with all this work. What's her name?
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
🤣 lol
@beatsntoons
@beatsntoons 3 жыл бұрын
Lathe restoration video, please :) It's 1251am here and I'm watching someone make a bolt. BUT I'M LOVING IT
@danielramsey1959
@danielramsey1959 3 жыл бұрын
I would have just welded the heads of a lh and rh pair of bolts together.
@irishwristwatch2487
@irishwristwatch2487 3 жыл бұрын
"I bodge a new one" lmao, i'd have probably done the same in the intrest of time
@cr1tx
@cr1tx 3 жыл бұрын
But it wouldn't be as interesting to watch :D
@Traboukos
@Traboukos 3 жыл бұрын
You just destroyed the video man!😂😂😂
@brandynpetersen8017
@brandynpetersen8017 3 жыл бұрын
It sucks to have to work on everything you own before you can use it, because it was "fixed" the "save time and money way". Like my dad does. It neither saves time or money.
@ptizim
@ptizim 3 жыл бұрын
Would you have thought, only a few times ago, that filming yourself machining a screw on a lathe could achieve 100,000 views in 1 day? I will be curious to know how many people who are not at all from the industrial sector you have been able to attract there thanks to your high quality restorations ... especially nowadays in this world where everything is only computer, digital, virtual, easy, fast... It is a pleasure to see you mastering the techniques of drawing (respect for the thread symbol), machining, dimensional control (a no-go threaded gauge? no need, thanks ;) For your lathe, a French proverb says: "it is in old pots that we make the best soups": keep it as much as possible! If we weren't so far away, I would give you with pleasure some nice pieces to restore that I haven't seen on video yet. Cordiales salutations my friend and long live to the famous Swiss precision!
@Sanek1strelok
@Sanek1strelok 3 жыл бұрын
Я бы сказал, что деталь излишне качественна для данной стяжки)
@gilah6565
@gilah6565 3 жыл бұрын
Нет предела совершенству
@Sanek1strelok
@Sanek1strelok 3 жыл бұрын
@@gilah6565 👍
@htscooter
@htscooter 3 жыл бұрын
Делай лучше, хуже само получится
@fainderskurs-koi8767
@fainderskurs-koi8767 3 жыл бұрын
ну эт ты загнул, про излишнее. Резать без подпора, М16 при шейке в Ф13, та ну на. да и калибр, Пр, болтается шо го вно в ополонке. Ты если точишь, то бери гайку. или не понтуйся с одним кольцом. Давай Пр. Не Пр.
@bevomcbevenstein
@bevomcbevenstein 3 жыл бұрын
I could watch machine work for hours.
@rasmis
@rasmis 3 жыл бұрын
Lathe doesn't work. I make a new one.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
Yeah too bad. I've had a similar issue before when parting off tough steel. It doesn't really like those big radial cutting forces.
@CraigWinsr
@CraigWinsr 2 жыл бұрын
If only I had the skill set like you,, I admire your work!!
@ChadWSmith
@ChadWSmith 3 жыл бұрын
Are we going to get to watch you restore the 60 year old Lathe?
@KristofferEngdahl
@KristofferEngdahl 3 жыл бұрын
Yes please!
@toniatalley1977
@toniatalley1977 Жыл бұрын
I absolutely love your channel. You are so so skilled at what you do. I love to watch you work
@fuseforme
@fuseforme 3 жыл бұрын
Marker sound almost ended me.
@Mr11mrdk
@Mr11mrdk 3 жыл бұрын
I love the way you restore tools . Time to work on yours. You take care of tools - that'll take care of you .
@vinceianni4026
@vinceianni4026 3 жыл бұрын
Hello my mechanics very pleasant to watch the video beautiful job well done my friend
@stephenyoud6125
@stephenyoud6125 3 жыл бұрын
another work of art ! who would have thought a bolt could be such a thing of Beauty ?!
@justinrochefort8369
@justinrochefort8369 3 жыл бұрын
I can watch all day making new ones!
@teacheme
@teacheme 3 жыл бұрын
Insights is exactly what this was. Excellent. More like this please.
@giacox2701
@giacox2701 3 жыл бұрын
Really loved this super "insight" project, showing how much time and dedition cost every single piece. Great job mymechanics!!
@pajenja
@pajenja 3 жыл бұрын
You gotta love how tools appear without the hand holding them on screen making the tools look alive and working, measuring etc by themselves
@joaovictorvelloso
@joaovictorvelloso 3 жыл бұрын
how nice is to watch a perfectionist artist work in his office! cool. applause!!
@generaldisarray
@generaldisarray 3 жыл бұрын
Outstanding work, as always. It's a pleasure to watch you work. I think your chatter issue is purely down to the fact that the HSS cutter is trying to cut on three faces at the same time, and is binding, as you move further into the work. If you had some relief, either on the work piece or the tool, or used a smaller round nose cutter to created the valley in multiple passes, it would eliminate the binding/chatter.
@mymechanicsinsights
@mymechanicsinsights 3 жыл бұрын
It has relief on all sides, it was just too big and the lathe too much wear.
@deburgemeestervanhespedam3314
@deburgemeestervanhespedam3314 3 жыл бұрын
Applause for the artist!!!👌👌👌👌👌
@ulissesleal2002
@ulissesleal2002 3 жыл бұрын
You did a fine work, mate! I personally love the bluing and hexagonal methods, they are good to bring the piece's sturdy appearence and boost it's own hardness and rust resistance. Kindest regards from all the engineers from around the world, your job deserves respect!
@Knilch58
@Knilch58 3 жыл бұрын
What a pleasure to watch! It's relaxing and reminds me to my apprenticeship almost 40 years ago. 👍
@calebsimmons8539
@calebsimmons8539 3 жыл бұрын
If I was given one wish, it would be to see more of you videos. I love your content
@DoubleDsDeliveries
@DoubleDsDeliveries 3 жыл бұрын
Great video. Love the paper diagram showing all that's needed to get to the point of "I make a new one." love to see more of that. Really behind the scene/what's in your head when designing.
@carnacthemagnificent2498
@carnacthemagnificent2498 3 жыл бұрын
My dad was an enginner in the cold war days working on cutting edge defense stuff. He tells a story of the best mechanical engineer he ever worked with going on a boating trip in the Caribbean and his engine failing. He collected some broken parts and headed into town, found a machine shop, and took it over to make his own replacement parts. Problem solved. I'd love to be able to show him this channel and say "is this they guy?" :-)
@alexandriadavis3730
@alexandriadavis3730 3 жыл бұрын
I am astounded by the patience and confidence those threads must have taken.
@Wizzard_Robin
@Wizzard_Robin 3 жыл бұрын
Die ganzen Details haben mich echt gefreut. Abmessen, Skizzieren und in Echtzeit. Da sieht man erst wie viel Arbeit und Zeit eigentlich in so einem Projekt steckt.
@TheEDNC
@TheEDNC 3 жыл бұрын
Outstanding 👍
@johanback5659
@johanback5659 3 жыл бұрын
I think your "blueing-game" is the best on YT right now: beautiful, even colour and consistence result every time
@collinwelch757
@collinwelch757 Жыл бұрын
Fantastic video, much of what is demonstrated here is used almost daily in the hydraulic repair shop that I work in.
@dkranda
@dkranda 3 жыл бұрын
I would love to see this with even more details. I'm fascinated by how accurate you can be with your tools.
Broken Vice Repair - Restoration
16:45
my mechanics insights
Рет қаралды 777 М.
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Making Power Hammer Dies for 'Black Beard Projects' - with Lock Mechanism
13:06
my mechanics insights
Рет қаралды 478 М.
Some UPGRADES for the Lathe || INHERITANCE MACHINING
22:20
Inheritance Machining
Рет қаралды 752 М.
Making a Dead Blow Mallet - Inspired by 'PB Swiss Tools'
13:23
my mechanics insights
Рет қаралды 1,4 МЛН
I Restored this Broken and Cracked Tank for 'Mister Patina'
11:29
my mechanics insights
Рет қаралды 925 М.
Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
20:33
my mechanics insights
Рет қаралды 1,7 МЛН
Homemade Lathe Automatic Feeding Mechanism !
25:45
M.R. AKPINARLI
Рет қаралды 101 М.
Compound Acme Lead Screw for American Pacemaker Lathe
40:55
Transforming A Stainless Steel Bolt Into A Fully Functioning Miniature Lathe Chuck
28:44
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН