This Could Be STOPPING You From GETTING LOUDER MIXES

[@Durkhead]

Ppl dont understand that its the low end thats eating up your mix if your limiter is pumping and you want more loudness just take some low end out of your kick because you prob over did it anyway

[@RelicLabzEntertainment]

Send your drums to 2 tracks. One track you use soft clipper and saturation on and maybe some compression. Then send both of those tracks to a bus track and that track will have a limiter on it for the drum peaks. This is the way ive found to get the fattest drums with little to no headroom change Sending the high percs to a flanger and blending that flanger in with the main sound can have a spacious addition without clouding the mix like a reverb would.

[@marcusboone6045]

I was just thinking a similar thought. Can the same effect be achieved via parallel compression?

[@Dayvbeats]

I think this is New York compression

[@HieuAnNguyen-qd9oq]

Hard clipping on drums is better

[@NARXOVERHERE]

do drums include 808 in there ?? my track only have 808 and drum percs in it , no kick drum , so will the 808s are kick drum now ? if it is , should i use this same technic or i need some adjustment ?

[@CZYProductions]

​@@NARXOVERHERE Yes, you can include the 808 in there; it will give it a nice saturation and will shave off the peaks if you use a soft clipper and like the effect it does! or use a compressor before the Clipper to glue everything together and then clip it afterwards if you want. Since a compressor won't catch all peaks, you can get some db headroom out of it without a big sacrifice in transients and then just push the loudness with a limiter.

[@BgSamples]

Hard Clipping the Drum Bus is really nice esp with Kazrog or Gold Clip. Makes Kicks way tighter and more controlled

[@ThomasPhillips3]

thanks bro. love this kinda content. quick, useful tips to help my mix.

[@Spaceman.Osborne]

Upset cause I JUST started doing this a couple months ago but I had to figure it out on my own 😂 When you tame all your peaks BEFORE they get to the mix bus it's a whole lot easier to get loudness!

[@HShorro]

makes sense, i hear it gives more open sound, interesting with the GP i wanna try that

[@Freewayquezmusic]

I was just looking for something to open up my bass this may help imma try tonight

[@runituproil2373]

2:01 the drums actually come alive with the technique 🔥🔥🔥

[@dage509]

u breaking down the good stuff. i still don’t understand limiters all the way but this helps a lot.

[@Neuronexx]

I look at it as making preheadroom. Audio Engineering foreplay if you will. (No freaky). You broke this down really well though, years of experience in 15 minutes

[@devinkei1469]

You can also use God Particle for a parallel send and smash it and blend it in with the original

[@SuperFake777]

I do this I crank to 200

[@joeygproducedit7863]

​@@SuperFake777you have zero beats on your channel😂😂

[@joeygproducedit7863]

Zero beats on youtube channel 😂😂 🤔🤷‍♂️

[@iamgklef]

We know the god particle to he a mix bus plugin.. after using it on the dum bus, will you still use it on the stereo bus?

[@ny7musictv344]

No need

[@Reviewtheworld7]

Whats with the two watches. Whats the second one for?

[@ricemilk3185]

Well done Devvon your a credit to society

[@carlosortizjr5508]

Ceiling looks SICK!!! How did you do that?

[@QBellowMusic]

Thank you Devvon!

[@endmoore]

This video and audio is on another level 🔥🔥

[@stuartor3414]

Would you use a bus before this for some Eq and glue compression or are you using the god particle to glue it? What about tape saturation before this bus too or would that be overkill?

[@LloydMajor]

Thank you for the class!

[@MrAchris10]

I’m wandering how this would play in a New York Compression setup. Thanks for this. I need to start working my bus game a bit more.

[@LogicDaBeatman]

Thanks for sharing this one. I also haven't thought of using TGP on the drum buss alone. shape the drums, then limit. good stuff!!!!

[@worldfamous_23]

How I miss your covers my guy, they got me thru college 🙏🏿

[@danyocean1190]

We need more tips like this!🔥🔥🔥

[@officialyoungtybeats]

i saw teezio using the weiss limiter after god particle, does ozone limiter gives a better sound

[@winslowdonovanbeats]

this man can do no wrong!!! i aint got god particle so ima try slate digital heatwave and iztope excitier instead thx manggg

[@michaellima8268]

did heatwave work well?

[@winslowdonovanbeats]

@@michaellima8268 tbh i felt like it added too much of an artificial sheen haha my voice is more low-mid range so it may be better for a falsetto but i may have to fux wit it again

[@Prodbynova69]

which yhamha speakers are those behind you is it hs5 ?

[@ThatGuyBrighFly]

Off topic what’s a good motherboard for music production?

[@Reggi_Sample]

Wonder if MV2 upward expansion can do the same as maximizer. Narrow the dynamic range, make the quieter drum sounds louder without affecting peaks

[@thegeenius]

insanely helpful- and through,, can't thank u enough for all you do sir,

[@FlowDojo]

if we're just limiting the kick peaks, what if we just lower the kick level down a bit then push the drum bus up?

[@DanielThompson-vz3jc]

the ceilin is fire!

[@vancenichols9490]

Awesome information! Thanks!!!

[@chandlerboster7084]

I love how you get right into it. Your content is great

[@wesxproductions2685]

Weird question. You ever import the stems to a beat into your project but the transient is off a little from the instrumental. The tempo is perfect for both the 2 track beat and the stems to the beat yet the transients to the stems from the beat are a little off compared to the 2 track… how do you fix this? Just try and move the stems as close as you can to the transient of the 2 track you recorded the vocals over??

[@realjnash_Official]

Very Nice Keep putting out the knowledge plus I subscribed

[@sirvaant]

Thanks for the insight!

[@doziermuzic]

Thanks Dev

[@marvinbell7007]

Great advice.

[@IamBryanConway]

PREACH!! 👏🏾👏🏾👏🏾

[@runituproil2373]

I needed this tip fr 💯🙏🏾

[@freyrik]

Bro is never late with them dual weilding watches. 🔥

[@BeastmodeBeats]

What’s the name of that limiter?

[@Lamiere]

what if I am using a two track? could I put a limiter on the two track and then one or the mix bus?

[@EAZWOOD13]

This is awesome!

[@NSTYwun]

That shirt is dope! 😎

[@prod8538]

Are you still running through your 2BUS+ or is this entire digital processing in the box? I have recently got 2BUS & AD+ and have a couple questions.

[@Airic]

fire tip. goodlooks

[@maavinomusiq]

Gonna try dat right now

[@reginaldbastien5617]

Are u using 2 limiters in your master buss or a clipper and a limiter?

[@joeygproducedit7863]

Hes got 2 watches on

[@iamquaret]

First studio one

[@NitroTheFlash]

incorrect lmao'

[@YEOTTI]

@@NitroTheFlashbig big incorrect

[@hndrxxbeats]

In the buildingggg

[@MrIAMLEGENDstudios]

Nah, @helpmedevvon please explain to me where the camera setup is! What lens is that a 11mm? How far away is it positioned? Need a studio tour follow up

[@dejidocemo]

I actually accidentally landed on this technique last night. Didn't know how I arrived at it but now I know why I should.

[@D-One]

So.. You limit the drum bus so it's loudness doesn't trigger the master limiter as much so that everything can get louder... got it, will try!

[@PatrickObiang]

BRAVO!

[@brandonsandoval9890]

bro wearing two watches

[@chuckyc378]

What’s to him?

[@justin.johnson]

😂

[@Shecrimson]

I wear three

[@davidfields1920]

2am new video Let’s gooo 🔊🔊🔊💎💎💎

[@HelpMeDevvon]

Wow david you are a legend!

[@ernmoneywrightdjrubbacity1723]

Thanks 🙏🏿 💪🏿✊🏿🎯

[@charleeparkerxo]

Is pretty much the same as clipping the drum buss?

[@R01499-y]

Yeah you can either limit or clip, you get different sound/feel from both

[@MokerB]

Aye! Devvon with the Naruto drip!

[@HelpMeDevvon]

You peeped!

[@Mixedbyjojo355]

I suggest you call Teezio invite him and grab some popcorn and watch the CTZ series from Baph and take notes!

[@yomommacalled_]

my only problem is on phone speakers the high end on my vocal crackles around 3-8k but not on any other speaker please what do i do

[@Durkhead]

Use saturater not a clipper or just take some low end out before you hit the limiter or parallel track with high pass

[@prodbyducktape8967]

what is the god particle

[@Zelci]

or just use knock

[@bayboymusic1]

Nice!

[@kellcoleStyleEnt]

Yo fam how can I join your mixing class ? D m me back

[@rix9422]

7:08 You're wrong about the no limiter on the god particle. The plugin loads up with 5 db limiter (second knob on the bottom set at 12 oclock just like you have it), so the difference you showing here isnt gain matched to give any valuable information. At least thats how I perceive mixing - your opinions should be based on hearing what it actually does gain matched and not just hearing the (+5db!) louder version.

[@disjean47]

He turn off limiter, there is knob above.

[@rix9422]

@@disjean47 oh wow i did not notice there is that button at all. thanks for the info!

[@SheWillForWill]

God Particle AND Ozone together? 😳

[@itsmesnooze23]

You know what else helps having your drums louder? Not lowering the faders. The drums are not at 0. R clap is at like -24. That's why it sounds like. Raise the fader and watch the volume go up.

[@fizzex]

drums at 0 would peak bro u need headroom for a clear perception with no distortion

[@Reneromero08]

Bro just found out about clipping lol

[@prodyouleeseas]

clutch

[@skeedotproduction8079]

dope

[@hexn6458]

he got 2 watches on🔥

[@sirvaant]

That’s cause Homie can tell time!

[@johannyc]

Gems

[@BezaleelIsrael]

🐐

[@Weinky]

🔥

[@2coldjames648]

Video sent by God

[@GenZRevolution]

Preeaccch

[@akshaybhargav9971]

why's he wearing 2 watches though??

[@ts9602]

💥💥💥💥💥💥💥

[@mprhustle888]

🎶🐦‍🔥❤️

[@emiete]

Yo, why do You sound so squashed Devon?

[@LUFFYLOVESLOFI]

He even managed to compress himself with all this limiting

[@Durkhead]

You gotta be careful doing this cause your bringing up a lot of reverb and your cymbols can get out of hand real quick.

[@jonathancrowell4648]

Reverbs should be on sends, not drum channels, thus unaffected by drum bus effects.

[@Durkhead]

@@jonathancrowell4648 well its not on this guys as soon as he hit the button the reverb on the snare got super loud

[@jonathancrowell4648]

@@Durkhead he probably has the drum bus sent to a reverb, which I do as well. It’s not really a difference that you’re going to notice down the line. If anything it makes it breath more, that level of reverb will translate very well in the mix.

[@Durkhead]

@@jonathancrowell4648 its also gona bring up the cymbols more too so there might be a part where theres different cymbols in your song like a crash cymbol for example and it can make them super loud

[@chrisjay3026]

Confusing bruh

[@BabadookJesus]

Those drums sound shite

[@Sniper_T_2x]

I think it’s just for tutorial lol

[@emmanuel.n8458]

Too much talking. Just go straight to the technique

[@CKrippa45]

Just push everything into a soft clipper. Y’all doing way too much

[@LUFFYLOVESLOFI]

Damn, I thought this was going to be an educational, helpful video but God’s Particle showed up & ruined it.

[@YEOTTI]

Im not hearing it

[@mixedbyviibez]

train ur ears more. i can hear the differences even if slight on my phone speakers

[@YEOTTI]

@@mixedbyviibez LOL ok

[@django3108]

​@@YEOTTIHe's not lying gang fr... Although KZbin compression makes audio details harder to hear, so you get a pass in my book

[@YEOTTI]

@@django3108 SHOOOT im listening on the dt900 pro x, couldn't hear it sorry.

[@DevvonTerrell]

@@YEOTTII heard it on my phone speakers what the heck yall listening on 😂

[@x0recordsllc]

God particle your vocals, that is all I have to say Edit: master plan your drum bus to get the best of both worlds between clipping and limiting

[@nickarthurnight1019]

don’t WANT LOUDER… WE WANT PAYING… only way to make money is to TALK ABOUT MUSIC…NOT CREATING IT… unless you sell plugins & midi packs. BETTER TO BE A PROGRAMMER

[@charlesbawor]

then why are you here? this isn't freecode camp

[@INNERMONO_]

You want loudness? Clip 2 Zero folks 🫡