this COULD'VE been real bad | Very Sick 6.0 diesel Excursion

[@PowerStrokeTechTalkwARod]

SMOKEY smokey, 7.3 that is! kzbin.info/www/bejne/jaLcYaKnoLhmfLs

[@Kentucky4runner]

I know 6.7’s are your bread and butter, but the 6.0 content is fun to watch. Especially your running dialog as you work the challenges out.

[@PowerStrokeTechTalkwARod]

Thanks pal

[@Jewalston]

I ordered a 2003 F-550 Crew Chassis with that 6.0L, 6 speed manual, 4.88 rear. Being a first year run on that model, it spent more time at Bayou City Ford in Houston in the first 6 months, than I had possession of it. It was popping injectors left and right. After about the 5th injector trip, Ford authorized an entire new set of new revised injectors, and I never had another issue with that truck and sold it at a little over 200 thousand miles. The truck had a 12ft flat bed on it and weighed about 10,500lbs and I pulled a 40ft gooseneck that weighed a little over 11,300lbs hotshot. It was a load hauling beast. I regularly hauled 20,000lb loads on the deck, and it cranked it down the highway like nothing.

[@tdotw77]

It is a real strong motor & usually problem free when not being hot-rodded. 👍🏻👌🏻🛠️

[@JohnNelson-w8k]

Ya. A shout out to Diesel Tech Ron. He was a valuable resource and an unfortunate tragic loss.

[@PowerStrokeTechTalkwARod]

RIP DTR

[@timsmothers8740]

Right on with the nod to Diesel Tech Ron RIP 🙏 .

[@PowerStrokeTechTalkwARod]

@timsmothers8740 amen brotha

[@willb7975]

Another near first year 6.0 experience, purchased new 2004 f350 cc lb 4wd. Multiple trips to dealer, mainly cleaning turbo and egr valve. Sold @ 58k in 2009 and then 2011 back into an 06 same model config and 6.0. Had 1 bad injector, and used regularly gray DK and discovered Archoil9100 with T5 10w30. Bought used at 129k and sold 206k. Maintenance and OEM filters are key, with archoil9100😊...tks Arod

[@stevenseverson7353]

Love watching arod! & raymans repair! These 2 guys are absolutely amazing Mechanics! 💪💪🏆🏆

[@PowerStrokeTechTalkwARod]

Ayeeee

[@randallhoover2410]

I found out about Arod watching one of rays videos when Arod was in Florida helping Ray out at the shop lol. Been watching both since then

[@stevenseverson7353]

@randallhoover2410 watch Eric. From I Do Cars. They all hangout 2gether great bunch of guys

[@radarnj8043]

Appreciate your persistent power skills with your tech terminology! Thank you.

[@tdotw77]

Man I thought that thing was rod knocking when you first started it!🤦🏻‍♂️ I've always loved these Excursions, especially the super nice Limited Edition & Eddie Bauer ones. I've always wanted one and hopefully I'll be able to get one someday with a 7.3 or a 6.0. A nice black Limited edition one would be sweet. I like black colored vehicles the most, although theres a few other colors out there that i wouldn't mind having either. Someday....👍🏻👌🏻😄🛠️🔧🔩⚠️🦺🚧🏗️💨💰

[@zekester1]

Heck yeah!!!😉 I had a bad injector(brand new) on my 06 6.0 & it took foreverrrrrrrr to burn all that fuel that was in the cat🤦....👍💪💯

[@Uncle_Fester24]

Great video. I like all the mod videos but really enjoy your repair videos. Old school PTT vids...Talented man!

[@PowerStrokeTechTalkwARod]

Fester my main mannn

[@pks2634]

I had soot raining down on the windshield at every stop sign on Beck Road. I had to laugh at the other drivers following me because there was so much smoke they couldn't see very well and they kept dropping back 5, 6, 8 car lengths behind me on the way😅. Great video. Thanks for fixing the Ex. Best wishes to you. 😊

[@tdotw77]

You're the owner? Nice Excursion man! I love these things so much! I'd love to own one someday! Just gotta get the finances in order and maybe win a small lotto scratch off tix($1Mn!?!)💰💸👍🏻👌🏻🛠️🔧🔩🦺

[@PowerStrokeTechTalkwARod]

Thanks for coming thru brother

[@christianrodgers6046]

Love those excursions 1

[@ts6141]

I have an 04 F350 6L and I've had my run of mechanics who don't know sh!t but thankfully found one locally who is good. I replaced all my injectors, my ICP, EBP, IPR, oil cooler twice (first place put in a jank unit) but thankfully now it's running good. I do a lot of work myself but it doesn't fit in my garage so I'm limited by the HOMAFIA haha!! She has been running like a champ for a while now since finding the local good mechanic.

[@21psd]

Gettin' back to your roots with the six-o Arod! Nice job and tutorial, and 👍 for the props to Diesel Tech Ron 🙌

[@PowerStrokeTechTalkwARod]

🫡🫡Tip tha hat to the masters who passed the baton 🫡🫡

[@ajackson8127]

Good job

[@Lucariorunner]

love 6.0 content, still upgrading mine

[@FORD6689]

Im watching from yokosuka japan.. Had to leave my 04' 6.0 ex back home.. I miss driving Ole girl.. She has 400,000 & still going strong, with factory head bolts..

[@PowerStrokeTechTalkwARod]

Hey good morning my friend

[@kingranch8516]

Now that’s getting into your work.😊

[@jerryknorr679]

It is nice when you are doing your videos there is no back round

[@jerryknorr679]

Forgot to put a noise

[@dean3471]

Nice. I always liked the Excursion. It would be really cool if they made a new one and It had the new 6.7 HO in it.

[@herveyforward5956]

Respect nothing but total Respect! Great video the sweat and skill level says it all. Herv

[@PowerStrokeTechTalkwARod]

Thanks brothaaa

[@nysucks4508]

Another fine fix Nice truck

[@georgelewis9729]

Damn you’re a pro AROD!! Nice work!!

[@Tallywacker76]

Go to Michael Knight came through pretty good with the camera

[@annone6462]

Arod, thanks for teaching us stuff.

[@JoshHefnerX]

Aaron, a couple of questions: at 200k miles since you're already that far into it, would it have been prudent to replace the other 3 injectors or is their lifespan usually longer? Do you boost leak test when you pull a charge pipe loose normally?

[@PowerStrokeTechTalkwARod]

Could have, customers choice. No not usually I do not...

[@mjbskidoo]

Awesome job again my friend!!😊

[@ericdavi1231]

Love the 6.0 Videos! My 05 F350 has been taking my boat to the ramp without fail since I bought her 3 years ago… oh and don’t ever take the LCF badge off your intro! I’ve got 2 of those as well, lol!

[@PowerStrokeTechTalkwARod]

4.5 baby!

[@ericdavi1231]

@@PowerStrokeTechTalkwARod I thought one of them was going to be RIP this year, but between you, and diesel tech Ron and bill hewitt, she is spraying lawns again! No one in town will work on LCFs anymore!

[@PowerStrokeTechTalkwARod]

Wow

[@peterbenson3776]

Id be in full panic seeing grey soot!!

[@timsmothers8740]

That was the injector that went bad on my 05 6.0l, and my Arizona ARod did all 4 of them whilst he was in there a wrenching. And do You Sir get headaches from all of that Tech knowledge and secrets jammed Into your Cranial Vault ? The last person in that Stroke was a BB in a box car type brain in comparison Brother. Thanks for doing another 6 liter video for us.

[@PowerStrokeTechTalkwARod]

🤣🤣🤣

[@timf6916]

Nice

[@coupe347notch]

How often do you suggest to change the fuel filters on the 2011 6.7

[@PowerStrokeTechTalkwARod]

10-15k miles

[@desotosky1372]

Does the injector controller need programmed to the individual injector spray characteristic or did I miss that part? I kinda remember the "guy" in the Southern shop programming that information on his Silverado injector replacement. Thanks for the video.

[@PowerStrokeTechTalkwARod]

Good question, that is ONLY for common rail HP fuel systems. This is old timer high pressure oil. Rip em out and slam then in, done.

[@tylerhowerton8518]

Damn shame how Milwaukee did diesel tech Ron sent him a cease and desist letter from using that ratchet even though he was the reason a lot of us purchases the tool as soon as if one out about that I went to another brand

[@trevorfloyd8447]

Nice work 👍🏻 internationals are great. Where does the 7.3 stack up? You said 6.7 1st and 6.0 2nd... I have a 97 and just wondering

[@PowerStrokeTechTalkwARod]

7.3s, distant 3rd....lololol

[@trevorfloyd8447]

I would agree, 7.3's are slow as well as hp and torque numbers are very low. But I love the OBS body 👌🏻​@@PowerStrokeTechTalkwARod

[@bobcatman334]

Best engine ford had in there trucks.

[@JLCmike4014]

The 6.0L is a close second. The powerstroke 7.3L will always be the king of the hill.

[@PowerStrokeTechTalkwARod]

Shhoooot ill pass them 7.3 dinosaurs all day. Time for.me to move on with dem can of worms. Rust belt makes them juss useless

[@JLCmike4014]

@@PowerStrokeTechTalkwARod, still the most reliable though.

[@bobcatman334]

6.0 is very reliable if you just do some basic things to it. Plus the ability to tune and have a solid tow rig is night and day over the 7.3. Id rather a 5.9 all day over a 7.3

[@JLCmike4014]

@@bobcatman334, i agree with the 6.0L being reliable once you fix all its shortcomings. Plus if it does blow head gaskets or what have you it is still rebuildable unlike the modern junk that’s just a throwaway engine.

[@michaelahlers307]

How is Cup? Do you do Stand Pipes etc. When you're that far in?

[@PowerStrokeTechTalkwARod]

No stand pipes here. No cups either to do

[@sergeifil6990]

What program is used to diagnose?

[@PowerStrokeTechTalkwARod]

IDS

[@jameshenry3921]

You need 1 of those over engine creaper instead of laying on top of rad.

[@PowerStrokeTechTalkwARod]

Brother, had 1 of those 18 years ago. Garbage. Those do not allow me to get IN there. It keeps me to high above the engine.

[@rkschloithe]

@@PowerStrokeTechTalkwARodyou just need a harness and hang from an engine hoist and have an assistant move you around and hand you tools and parts. 😅

[@PowerStrokeTechTalkwARod]

@rkschloithe lmaooo

[@bobh6728]

Is the “PowerStrock Tech” Facebook page really you?

[@PowerStrokeTechTalkwARod]

Fake!!!!!! Report NOW!!!!!!!!!!

[@bobh6728]

@@PowerStrokeTechTalkwARod He has a ton of your content. When I try to report it, it wants me to say it is impersonating someone. But because I am not your friend on Facebook I can’t.

[@bobh6728]

@@PowerStrokeTechTalkwARod I was able to report it as a fake page. Then say it was pretending to be a business, and searching for Powerstroke Tech Talk and your page was found, Powerstroke Tech Talk w/ARod. That one is you, correct? Hope that works for you

[@PowerStrokeTechTalkwARod]

@bobh6728 powerstrock is not me

[@3374jj]

That sicks oh... not feeling good at all

[@jumpinjimmy69]

Looks like you’ve been getting some sun there Arod!!! Maybe we need Arod after hours videos!!😂😂

[@joneyjimms1598]

Tried to email you at Gmail. It was a no-go, got some questions for. Can you send me your email please. Thanks marvin

[@PowerStrokeTechTalkwARod]

It is in the description of this video, copy & paste it