This is a quick video where I introduce everyone to this roadster I picked up. We see if we can get it running and check out what's wrong with it.
Пікірлер: 48
@VinoRatRodbuilds2 ай бұрын
This should be fun 2 c what u come up with. 👍
@BigOMotors2 ай бұрын
Should be cool
@BigOMotors2 ай бұрын
Good suggestion!
@larrymitchell8464Ай бұрын
There is the size of engine in the top of the heads and the number for the engine is over the starter 289 , 302 , 351 all very good engines .
@BigOMotorsАй бұрын
Awesome info! I’ll check it out, Thank you!
@lj62782 ай бұрын
Cool, Looking forward to finding out. 😉 Someone said there are a lot of Ford 5 speeds out there, and I'm sure Ford OD autos, too. You could go with that and call it "The Odd Rod!" 😍
@BigOMotors2 ай бұрын
Ahahaha. That’s hilarious
@redneckdrennan7452 ай бұрын
bolt a c6 to it or a 4 speed manual and run it seen so many fords screwed with a chevy run the wheels off it
@BigOMotors2 ай бұрын
@@redneckdrennan745 For sure!
@thisisyourcaptainspeaking2259Ай бұрын
I'd put a sbc and th350 in it if the rad has a cooler. I suppose the right c4 could be hung on this motor.
@BigOMotorsАй бұрын
Yea that's kind of my dilemma. Leaning towards the c4 route.
@brocluno012 ай бұрын
They put the Ford in there so they could have a front mounted distributor. So if you are goiung to drop something into it, try a 383 Chrysler with a TQ-Flyte 😁
@BigOMotors2 ай бұрын
Oh that's a cool thought. I think you're right on the distributor.
@russriley30052 ай бұрын
you see a lot of old fords with chevy motors, especially roadster stuff
@BigOMotors2 ай бұрын
Ok. Its kind of cool, definitely leaning towards keeping it in.
@hickeyskustomresto2 ай бұрын
There's a lot of 5 speed mustang transmissions out there
@BigOMotors2 ай бұрын
Yea, that would be an easy fix I think.
@boblister6652 ай бұрын
I'm thinking someone had a 27 chevy title and built a body to simulate one kind off. Looks pretty homemade to me. A 27 chevy would be narrower I think. Pretty cool car should be fun. That 289/302 would give it plenty of power
@BigOMotors2 ай бұрын
Very true. The wide body was one of the things I liked about. It is metal but it should be a fun ride when she gets going.
@davidwoodham13072 ай бұрын
run a LS1 IN MATE they are a great motor I won't To do a ramrod 37 Ford pick-up with a great LS1 motor mate
@BigOMotors2 ай бұрын
@@davidwoodham1307 Very interesting!
@UberLummox2 ай бұрын
You're correct. There's zero '27 Chev about that body. It's all home spun. Maybe the frame is '27 Chev? It's fuctup looking. Cool factor is at a deficit.
@hdjohn112 ай бұрын
First off, I believe I would research the vin., to make sure my investment was secure. Nothing wrong with a replacement engine in it, as long as the paper work was legit. Then I.D. the engine. Then decide what tranny to use. Maybe try what the last owner suggested first?? If that works?? See if I can get it insured?? If yes? Lets have fun with it till another good trade comes along!! Lol
@BigOMotors2 ай бұрын
Awesome suggestions! I do haver a clear title on it. There was also some previous paperwork that supports the title. Great ideas!
@lj62782 ай бұрын
What did you pay for it?
@BigOMotors2 ай бұрын
I did some trading on it so it’s hard to say.
@lj62782 ай бұрын
@@BigOMotors That's the best way. It also looked like it had a "Differant" rear end. Maybe an IRS. 😁
@BigOMotors2 ай бұрын
@@lj6278 lol, it does. Maybe out of a corvette?
@jerrykeel97992 ай бұрын
Always put a Chevy in it .. and a Muncie 4-speed .. with a 4/11 posi .. 12 bolt Chevy rear end .. also Two four barrel carb intake and Edelbrock 600cfm carbs . This light weight will run like a scalded dog ..
@BigOMotors2 ай бұрын
Nice!
@larryanderson80492 ай бұрын
put in a C4..they are cheap light and reliable...or do a t-5 that you can use behind a ford or chevy motor.
@BigOMotors2 ай бұрын
Very cool. I wonder if it would fit up to the bell housing I've got?
@larryanderson80492 ай бұрын
@@BigOMotors Now I am not so sure....t5's were offered in mustangs and camaros plus some s10/15-'s what I remembered later was perhaps the aftermarket tremecs 5and 6 speeds were maybe the ones that were a universal fit...you will have to check them out...sorry for the possible misinformation.
@BigOMotors2 ай бұрын
@@larryanderson8049 Very much appreciated.
@hickeyskustomresto2 ай бұрын
"A ford in a chevy? Who does that?" Every smc chevy guy who ever who got their hands on a ford coupe or bucket lol Any good 351w has a lot more go. Put a transmission in and send it
@BigOMotors2 ай бұрын
Love it!
@robs45172 ай бұрын
So you want to remove a good engine and put a crappy chevy in it? 🤮
@BigOMotors2 ай бұрын
lol. It's an option but this engine runs a little too good I'm thinking.
@bobhalstead18792 ай бұрын
He is tired of pushing ot towing it due to the ford powerplant
@VinoRatRodbuilds2 ай бұрын
Funny stuff guy's 👍
@BigOMotors2 ай бұрын
Thank you
@vincentsmith2332 ай бұрын
Leave the motor in it and drive it bet you leave it in 😂
@BigOMotors2 ай бұрын
lol. I probably will.
@BigOMotors2 ай бұрын
I'm thinking so.
@vincentsmith2332 ай бұрын
Put the ford transmission and ride
@BigOMotors2 ай бұрын
It's looking that way.
@Freeman-eo2lx2 ай бұрын
Sell that c Ford motor buy a chevy transmission
@BigOMotors2 ай бұрын
Lol.. Maybe I will but I think it might be easier to toss a transmission in it for now anyway.