This is a W12 Land Speed Record Car

This is the Napier Railton, made with the Napier Lion W12. Originally from 1933!
you'll find this mod here - www.beamng.com...
send me stupid things on twitter fillman86
here's the discord - rules are don't be an arse lol / discord
feel free to use footage from my videos, up to 50% of any one video, just credit me, and supply a link to the video with it
want to throw your money away? - store.steampow...
edited by - Gear Driven Cams Gang#8604 (discord name)

[@CarMighty]

rear brakes only on a sausage formed 24 liter land speed record vehicle? what could possibly go wrong

[@jwalster9412]

The answer is nothing. Because all the outcomes were planned out ahead of time, so technically nothing could go wrong.

[@_blood_moon_proto_1500]

yes

[@fillman86]

and there were only there in case the parachutes they were testing, failed... the run way was only so long, and brakes were considered a feature XD

[@clarksonoceallachain8536]

Would you rather drive that Or the 241kph capable 10,500kg big rig jan de rooy had made in the 80s To go offroading with

[@anthonygibbo1881]

We picked our side now stfu

[@AquaPeet]

Basically a round coffin on a frame with narrow wheels and a MONSTROUS engine! R.I.P. Fillman, we loved you...

[@fillman86]

haha after recording, I took it around an old banked circuit, and it flew off the top XD

[@aguywhodoesstuff1116]

R.I.P ?

[@keithwhyte4750]

@@aguywhodoesstuff1116 yeah who?

[@Ferrari255GTO]

I think that part of the problem might be that drivetrain power loss wasn't high enough, especially since you mentioned the gearbox not being great, and/or people not having enough balls to actually push the thing further in fear of becoming a red mist on impact

[@fillman86]

possibly. The cross plys also would have sapped quite a bit too. I swear drivers of these kinds of things, would have become daredevils, if cars weren't around haha

[@MrRadicalMoves]

@@fillman86 Yeah... something to keep in mind. Tires from back then (as you found out) had absolutely terrible traction. Power to push the car further wasn't the issue... these things made plenty of power... it was being capable of putting that power down that was the real issue. A lot of these speed runs back then weren't done at full throttle... they were basically a balancing act of keeping the thing right on the verge of grip all the way up to as fast as the tires could push it. When at top speed, usually if you would give it any more throttle they would just break loose. The tires just didn't have the traction to push it any faster. On modern tires these things would probably have been capable of going MUCH faster (rather terrifyingly).

[@jcgabriel1569]

The latter is highly unlikely. The original driver of the car is John Cobb, an absolute speed freak. The man eventually commissioned a car to take the Land Speed Record, which he did, and he then decided to also take the Water Speed Record as well, which is the one that killed him...

[@Ferrari255GTO]

@@jcgabriel1569 so he became a red mist on impact XD

[@jcgabriel1569]

@@Ferrari255GTO well, not really. Though he actually had his fatal accident while slowing down on one of his runs... At the time of his death, he holds _both the Land and Water Speed Records..._ Makes me think what he would've done if he survived... Considering how addicted he is to speed, maybe imagining him trying to break records on a plane isn't far fetched...

[@solar_ignition]

Fill: "The brakes are absolutely garbage" Me: "what brakes? the biscuits you have attached to the rear wheels?"

[@fillman86]

my bad, "the biscuits are absolutely garbage"

[@tiagotiagot]

I'm not sure how good it is for land-speed records, but there's a "track" with banked corners that goes around the Gridmap (the current one, v2); there's also an oval too you pass by at some point. It's not very clearly marked, but once you find it, you can mostly just keep going straight at the exit of each banked turn to stay on track.

[@fillman86]

oh yeah, I forgot about Gridmap!! Since this video though, I've been working on the Terramar ;)

[@BrooksMoses]

I'd guess that the drag coefficient of that, with open wheels and open cockpit, is notably above 0.6, possibly even close to 1.0. But remember that drag coefficient is multiplied by the frontal area in calculating the force -- so probably what's happened is that somewhere in the Automation export, only a few tiny things are being included in the frontal area, and so BeamNG thinks the frontal area is 1/50th of what it should be.

[@fillman86]

oh, maybe

[@phen1811]

I thought drag isn't based on frontal arra

[@DJ_Level_3]

@@phen1811 Drag is the product of the Drag Coefficient and the Frontal Area.

[@TheLtVoss]

@@DJ_Level_3 well Physics are always a approximation especially the smaller formulas but the main part of drag is actually Cd times frontal area leaving out skin roughness and area of skin as well as laminar and turbulent flow

[@DJ_Level_3]

@@TheLtVoss Cd = coefficient of drag

[@cnat_sepll]

I've seen plenty of this style of car at VSCC events but never truly understood what the round bits were on the suspension. Thanks to this video, I now know they are friction plates to absorb shock! Thank you

[@fillman86]

Yeah, some late ones were hydraulic, but that was because it's the shape that people expected

[@RailsofForney]

4:50 *“I feel a great disturbance in the farts, as if millions of toilets suddenly cried out in terror, and were suddenly silenced. I fear something smelly has happened.”*

[@liamturner6424]

every so often the mechanics at brooklands motor museum start this beauty up and let the public experience the engine

[@fillman86]

oh man, that'd be so awesome!

[@dpscloud3324]

the compression was really bad for some reason when it came to the driving portion. Still thanks for this awesome video!

[@fillman86]

yeah, my recording crashed, and at that point, OBS reset my bitrate -_- I was quite upset

[@migueldenboer5186]

I'd love to see you make the streamlined Auto Union type C

[@fillman86]

well it is on my list :) I'll do it one day

[@pete913e]

Well, since you're apparently building land speed record cars now, I can recommend the Tarf II! I've built it before in another game, and quite enjoyed it, and would be delighted to see what you would do with it, aswell as to steal the mod body for my own nefarious purposes once you make it.

[@fillman86]

haha interesting, a front 1 wheel drive XD maybe one day

[@pete913e]

@@fillman86 Oh... interesting. Honestly hadn't noticed that bit before... Though that to me just makes it even more amazing. With the Napier of this video, it's sort of just a case of slapping enough power at it until it worked, but with the Italcorsa or Tarf II, it simply didn't have the opportunity to, yet he made it work either way, despite having... questionable drivetrain decisions, and what have you.

[@agenty_gd]

Vanilla cars in BeamNG don't have realistic drag coefficient values, the game simulates aerodynamics in a very basic way so it's not possible to put a realistic drag coef and reach a realistic top speed. When you have multiple layered surfaces, each of them adds extra drag. Usually they use drag coef of 10 and then multiply it with a scaleDragCoef parameter differently for each car to get accurate top speed. I'd say for a car with no layered surfaces and no scale modifier, 50 is a reasonable drag coef in BeamNG. Meanwhile Automation uses some custom Lua scripts to calculate aerodynamics so the BeamNG drag coef is 0 in Automation cars. And the issues with it you mentioned I think only happen when you add pressure to the body like in your swimming car build.

[@fillman86]

yeah, they do very weird things. I also know about the layered objects thing, and is something I was planning to put in a "beamng wishlist" video

[@mvdesigncustomworks5460]

You can use the autobahn straight for this speed passes, it's 34 km of straight-ish road and way more interesting than looking at a sea of white texture

[@fillman86]

haha hence why I took it to an oval too but that's also a cool idea, and wish I had done some kind of no-hesi XD

[@TrueSucrose]

when you were talking about how normal 4 cylinders are only 2.5L at most it made me realise that my old fuso canter with a 4.9L inline 4 was a stupid engine

[@fillman86]

Diesels are different though

[@Markos681]

JOHOJOJO!!!!! Tremendous car the Napier! And I confirm my suspicions: you are a VERY GOOD fan of cars, and you are very detailed when you make Mods. My sincerest congratulations!

[@fillman86]

thanks man, I'm glad you like my mods :)

[@deltacx1059]

Pushrod engines are rather reliable, no fancy stuff to go wrong. They don't like to rev high but there are more than enough ways to make up for that

[@fillman86]

dohc can be very reliable too, it just comes down to european's making garbage cars. The other advantage is that you don't rev them as much (but that's also because they don't like to rev as much.

[@deltacx1059]

@@fillman86 no doubt DOHC can be reliable but with how overcomplicated they like to make things now any bit of simplicity is good. Although I'd be dishonest if i didn't say i absolutely love desmodromic valve gear and maybe some of the homebrew freevalve stuff despite their complexity

[@The_Los04]

A drag coefficient of 50 is like driving Jupiter if it was flat and vertical

[@bradsparks6008]

Awesome vid the napier railton is beautiful! You've done an engined powered landspeed record car i think a jet one needs to be made ;)

[@fillman86]

thanks

[@franke0043]

Top notch work as always fil !! If you havent already, you should try making a really high revving engine with little to no power, and obnoxious sounding.

[@fillman86]

like the new f1 cars?

[@zigora3]

Drag coefficient weirdness is likely a result of an abnormally low frontal area figure.

[@dariopiovani5077]

Don't quote me 100% on that, but I think the weirdly high-pitched sound may come from the crank shape and firing order you used in the EngineSim engine - it appears to have a very pronounced "multiple of 3 cylinder" harmonic to it. Not too sure if there's data about crankpin angle separation or firing order on such old engines but that doesn't really sound right to me hmmm Gotta love the extent you go to in this sort of videos. Got your stuff into recommended a while back with the Piccolina engine swap video :P

[@fillman86]

haha I wouldn't call 3 weeks a while back :P but you're right that the firing order is a gripe of mine, but that won't effect the pitch :/ though it would help if I knew the actual firing order

[@dariopiovani5077]

@@fillman86 while it won't affect the pitch (which is inherently RPM dependent) it definitely will affect the timbre and shape of the basic waveform - hence me saying harmonics. This sounds like an inline three spinning double the revs at the moment :P Thanks for answering!!! (:

[@Sonny_09]

2:37 This thing is fantastic too look at HOOORORKKWK

[@fuze3522]

20x7.5 in tires would be about 180mm in width. which makes a lot more sense to me. its a land speed record car not a prius. it needs all the traction it could get for the time. they look skinny because the car is massive.

[@fillman86]

well there's also the fact that if you wanted a 180mm tyre, you'd have to make it yourself. So most of the time, they would make it themselves. Also automation does tyre sizes in a weird way :/ effectively making them have wider physics

[@fuze3522]

@@fillman86 I believe the tires were manufactured by Dunlop.

[@SchopenhauerZee]

Too much horsepower on a low RPM should make this thing undrivable in theory

[@fillman86]

haha lots of wheel spin, which is why it has such long gearing

[@notjamesmay5467]

Love this car and have seen it IRL but is was raced at Brooklands in the 1920s and 30s. Didn't know if you already knew this.

[@fillman86]

yeah, the track is cool, but mostly unusable :/

[@PRExJay]

It’s actually in Forza, so you could look there there for more accuracy

[@wastelander89]

Is just found ur channel omg I love it .u do my 2 favorite games in 1 and custom work to is the best. I love doing engine swaps and mods .I'm subbed and will be watching ur back catalog. Keep it up👍

[@fillman86]

Glad you like them!

[@guerrillaradio9953]

Coefficient of drag is only part of the story. The figure of 0.3 Cd isn't great, but since the car has a relatively small frontal surface area, the total drag factor (CdA, or coefficient of drag times effective surface area facing direction of travel) probably isn't too bad.

[@fillman86]

it probably would have done over 200mph given the chance haha

[@finlaymcdiarmid5832]

The guys that drove these cars preferred to not use seatbelts or their equivalent because they would rather be thrown clear in case of a fire. Tells you alot.

[@fillman86]

they also weren't very common in these days, usually being not even heard of by most people

[@meehdrescher]

interesting sound

[@fillman86]

I really wish there was documentation on its firing order :(

[@generic_potato374]

Pushrod gets lets you run a larger motor without going super wide like in a DOHC setup

[@MrWjb55]

did someone say beast of turin?

[@Tywild327]

3:40 HEY I LOVE PUSHROD V8’S!!!

[@fillman86]

I'm guessing you're american? XD

[@Tywild327]

@@fillman86 Canadian 😂 so technically yes but pushrods are still the best, This was a great video by the way!

[@rotkiW9014]

1:31 To put in perspective how bad the drag coefficient of 50 would be, a typical brick wall would have drag coeff. of about 1.6 That thing creates more than 30 times the amount of drag than a f*ing brick wall

[@fillman86]

haha things are just a little weird sometimes

[@thetruthspeaker1978]

Pushrod engines ,while not being a technological marvel, are more compact and typically produce more low rpm torque then ohc engines. I had to stick up for them because I'm an American.. 😂

[@fillman86]

they don't make more low end torque, they lack the innate ability to make high end power, so they focus their efforts elsewhere. If you tried with both pushrod, and any kind of overhead cam, you'd be able to make more low end torque with the later :/ The compactness is true, but only for the given volume, not necessarily for the given power (though I've not really though about the compactness vs low end torque... so maybe?

[@materialgworll3230]

10:19 the caris jumping

[@fillman86]

haha yeah, those tracks were atrocious

[@violettesaudio9185]

to be fair, engine braking was probbaly pretty effective with that thing

[@fillman86]

I could imagine!!

[@Toyota--Camry]

3:38 …and then GM announces a new generation of their pushrod small block V8

[@fillman86]

yeah, and it turned out that ford recently started making another too.... good thing fuel is cheaper in america, so they can keep using defunct tech like this -_-

[@BLOCKADE_CAT]

0:59 SPACE KING

[@MamLewis]

I FREAKING CALLED IT!

[@fillman86]

well done :)

[@wastelander89]

U did such a great job representing the car in game👍

[@dmitri546]

Hehehe, plane engine go chug-chug-chug

[@fillman86]

hell yeah man, this thing is cool

[@BMH781]

I remeber getting this car in horizon 5, this thing could pull a skyscraper, and do it looking beutifully.

[@fillman86]

haha I remember jeremy clarkson saying that some random mercedes had enough torque to start a dying star.... that didn't even have half this car's torque XD

[@BMH781]

@@fillman86 Lol, why buy a Ford F-450 to tow a yacht when this thing was made, brakes are a different story🤣

[@mrjed6912]

How come the Napier Rialton does not appear in the vehicle files for BeamNG? I have downloaded and unpacked the mod, However I can't find your car anywhere.

[@emperorofwarusthundus]

Imagine this with a diesel engine the torq would be like over 2000nm

[@fillman86]

it would turn the chassis into a pretzel XD

[@kornaros96]

Scania 770 v8 outputs 3700Nm...

[@thatbirbfriend2180]

Soothing voice

[@fillman86]

thanks :D

[@luke_2236]

yo what app is that where u make the engine sounds or whatever it is. yk what i mean? where u were making the engine sounds idk i forgor

[@fillman86]

that's called Engine Simulator, check out AngeTheGreat here on youtube, he made it, and makes videos about it!

[@memorimusic420]

Havent watched the video but its already dope

[@fillman86]

haha even though this is presumptuous, it's the right sort of presumptuous XD

[@memorimusic420]

@@fillman86 lmaooo i read W12 so ofcourse its gonna be good

[@jjfran.6ix897]

Ik u prob mentioned it in another vid but what application did u use to make the 3d body?

[@ayukovt]

blender

[@fillman86]

as ayuko said, I use blender. It's free, and can even be found on steam for some reason XD

[@jjfran.6ix897]

@@ayukovt thank you🤝🏽

[@jjfran.6ix897]

@@fillman86 that makes life easier, everything in 1place

[@jumbojacob3349]

another good 1 fill, may i suggest you occasionally do a slightly shorter video? like around 25 mins ish

[@fillman86]

I do, but my editor is new, and I'm still breaking him in haha

[@jumbojacob3349]

@@fillman86 alr :D

[@ffivguy1990]

Is it me or does it sound like the engine sound from engine sim has too high of a pitch? It sounds like you go through a pretty normal rev range before you get to 2000rpm.

[@fillman86]

yeah, unfortunately that was the best option too. I need to make new impulse response files to make it sound a little bit better :)

[@NSG27]

It is not a W12, its 3 banks of 4 Cylinders. An Arrowhead 12. The Napier Railton, Britain's most important pre war racing car, the perpetual Brooklands lap record holder by John Cobb.

[@fillman86]

it was called a w12 before the VW audi group made their w type engines. They also weren't the only ones, there's a funny f1 story about a filed one too

[@NSG27]

@fillman86 The engine is a Napier Lion engine and is found in this car and a couple of others, The Golden Arrow, 2 of them which dont run at the moment, and Chris Williams' Napier Bentley which is the only other running example other than the one in the Napier Railton. It has never been a W configuration. It's an Arrowhead configuration, 3 banks of 4 cylinders. Here is a link to Alan Wynn, the Director of the Brooklands Museum who now own the car and one of the only people to drive it regularly. I've spoken to Alan on a number of occasions at The Goodwood Festival of Speed and he let me sit in the car last year. It's a beast! kzbin.info/www/bejne/raHLqXuwqrx7pcUsi=FF8VlvuEmgr2SPFO

[@cindywieczorek5608]

how do you change the engine sound? when i tried changing it i deleted the engine sound completley.......

[@fillman86]

I'm not sure what you mean, but if you want simple engine sound swaps - kzbin.info/www/bejne/gXakXn6fh9Nnoq8

[@Pablo-Turbo]

10:55 4 banks of 3 cylinders?

[@fillman86]

lol oops

[@zacht9447]

What do you mean gave up the last Pushrod v8. chevy and dodge still use pushrods.

[@fillman86]

yeah, I didn't realise how backwards america still was when making that statement -_-

[@zacht9447]

@@fillman86 I mean when you can get 7L and 500hp out of the external dimensions of a 4 liter DOHC V8 and have it weigh less it's hard to argue with it haha.

[@jonathoncouchey7151]

Um, America has pushrod engines still. The chevy ls v8s, the ford godzilla 7.3 v8 and the dodge hemis are all still pushrod. The latest the 7.3 godzilla v8 being released as a brand new design in 2020.

[@kwsths499]

you forgot about diesels, Duramax and Cummins still use pushrod

[@fuze3522]

The C8 corvette stingray is pushrod everyone forgets.

[@fillman86]

yeah, this video took a while, and after I recorded that part, I found out about the new poorly named godzilla engine -_- it's a good thing they have some of the cheapest fuel, otherwise this old inefficient tech would not fly with customers haha

[@kwsths499]

@@fillman86 the whole reason why muscle cars existed and died in the first place

[@guard13007]

Are you sure those MPH records aren't in British miles? Cause those are different from American miles. For some reason.

[@fillman86]

lol kmh XD the superior measurement system

[@abhimaanmayadam5713]

Diesel 4 cylinder engines tend to have a lot of displacement.

[@fillman86]

yeah, often reaching 2.4L. Though I would imaging with the power RPM, you could easily go up to 3L maybe? I dunno, diesels are very unpopular in australia, and almost don't exist outside of semi trucks

[@abhimaanmayadam5713]

​@@fillman86 The hilux comes with the 2.8 diesel (v6 though)and I assumed it would be more popular. Also, more like generator and industrial engines you see large displacement (for a 4 cyl). The largest 4 cyl diesel you'd see in a car is probably the 2.8 engine youd find in a colorado, which is roughly the same size as a hilux or navarra?

[@ffivguy1990]

The Isuzu diesel I4 is 5.2L

[@fillman86]

@@ffivguy1990 nice, getting a lot closer

[@abhimaanmayadam5713]

@@ffivguy1990 I always thought that was an i6

[@tiagotiagot]

Hm, I had assumed things like drag were calculated based on the geometry... Would there be a way to get the value you need to put in the text file using what you modeled in some way?

[@fillman86]

it is geometry based too. These values are applied to the collision mesh, where their angle, and size make a difference

[@supertornadogun1690]

I feel like the drag is a bit wonky, taking all the panels and windows off your car makes it have a much better top speed, doesn't seem very realistic

[@tiagotiagot]

@@supertornadogun1690 That makes it sound a bit like it's just taking in consideration the "shadow" of the shape and ignoring more complex aerodynamic effects...

[@andreysab3432]

For some reason the mod broke for me, which made my automation car weigh *(insert negative number here)%* and when it exported to beamng it began ascending into the sky, unaffected by wind and gravity. I guess this happens when beam thinks your car doesn't exist

[@fillman86]

weird, I just tested it, and it worked fine. Maybe you have a corrupted install of automation?

[@801russc]

This is the 2nd video I've watched of yours and I almost clicked off... no need to go blaming all of us in the USA for Chevy not wanting to catch up with everyone else. I'm only playing, no way I could un-sub from yo crazy ass 😃... BIMMER FOR LIFE.

[@fillman86]

thanks for watching my stuff.... but what the hell is bimmer? haha

[@CG8379Gaming]

trying this mod now, how do could i get the grille

[@fillman86]

I get it, english is hard for me too sometimes

[@Kilgorio]

wow

[@cindywieczorek5608]

When you gonna post it?

[@fillman86]

it should be live for automation and beamng now :)

[@TACJHON_]

Can you now do the ford gt40 mk2? :b

[@TACJHON_]

To beat gt7 to it?

[@jwalster9412]

Now all it needs is the turbos from the W16.

[@fillman86]

entirely different type of W engine XD so that's the wrong amount of turbos. This would need either 3, or 6 haha

[@jwalster9412]

@@fillman86 I prefer 6 lol.

[@clarksonoceallachain8536]

Could you create the 2440hp DAF TURBO X1 It also has silly torque at nearly 7k ft-lbs 23.2L 12 cylinders of diesel Making 4 times more torque than this grandad plane car

[@fillman86]

I'm assuming diesel? unfortunately diesel isn't supported in engine sim :/ nor turbos

[@hexidezdex6145]

Make a w16 quad turbo ? Pls

[@fillman86]

I've tried making the VW W engines that you see in things like the bugatti engine, but bruh, did you know that every cylinder is offset? -_- that's a lot of jankery!!

[@staz3014]

@@fillman86 i tried making one in engine sim a while ago. Figuring out the firing order was impossible :D

[@hexidezdex6145]

Yeah u right bugatties engines are a masterpiece created by a bunch of engineers @fillman86

[@Rinoyra]

for some fkin reson im looking for my name in member to make sure someone gifted me bc it said

[@fillman86]

haha it should be in there :)

[@cpt_nordbart]

I have this car in forza horizon 4 and 5

[@fillman86]

yeah, it's a very famous car!

[@clarksonoceallachain8536]

Quite fun to throw around in a seasonal race They rarely use the class tho

[@sabikikasuko6636]

No offense, Fillman, but you really gotta work on your editing. The bitrate was so low I literally, actually, honest to god could not tell what was going on 😅 I drove this car on Forza Horizon 5, I had to keep a speed on 225. I'd drive straight down and it'd still tilt to the side. It was hell lol

[@fillman86]

yeah, I occasionally change my setup, and I think around this time I was dealing with a bitrate issue. This video is quite old though

[@el_dogetaco812]

Perhaps because it's a w rather than a V or an I

[@fillman86]

errrr

[@sucfers]

How do reply to almost every comment in this video.. What is your motivation

[@fillman86]

reading reactions is the most fun part of video making for me :P

[@ChromaticSchnitzel]

Second

[@fillman86]

congrats for being in order :D

[@PupHooch]

America still has pushrod engines being produced, in the form of the gas 7.3 superduty...

[@fuze3522]

Not to mention the Corvette, Camaro and Hellcat/Scat pack too lol

[@fillman86]

yeah, I found out about the new ford one too after I recorded that part. This video took me quite some time to make :)

[@Yuuki_Watage]

Both the LS and Hemi still use pushrod. Wtf? XD

[@isaactrockman4417]

Yea plenty of American v8’s still have pushrods

[@supertornadogun1690]

@@Yuuki_Watage yeah the LS has, and will be as long as it is made, a pushrod v8

[@barlex9113]

My best guess would be is that drag coefficient is measured as a percentage from full integers instead of float (comma) values, 60 would be 60% or .6, which explains why you needed 50 for it to behave like you wanted it to.

[@fillman86]

I though that too, but 0.5 isn't that high

[@drrussellmead]

Dang! You nailed it! Way to go recreating this beast! Outstanding video, Fillman!

[@fillman86]

thanks man, I'm glad you like my videos :)

[@monke6966]

0:21 *Who need brakes when can go fast* 😎👽💀

[@fillman86]

yeah, just have a longer road XD

[@sbr_sxd]

i think it lacks the transmission power loss, i don't think it'll be around 13%, as normal, my guess it'll be around 30-40% o_O

[@fillman86]

maybe, because there would be a lot of mass to it too

[@jflintgaming6832]

yo you should make the "chidy chidy bang bang" car (Im probably the only 2000's kid that knows that movie...)

[@craftgamer_23]

This car with an crazy amount of torque, almost no brakes and on the nürburing, what could possibly go wrong

[@fillman86]

hell yeah man, if I had a historic version of the nurburgring, I'd have used it in a heartbeat!!

[@dontdowhatido6503]

Don't talk about our pushrods ls engines like that. they are great and powerful

[@fillman86]

they sure are something :P

[@mrjed6912]

You need to make the 47 litre Brutus

[@fillman86]

I've been considering it :) but that car isn't that old, and was basically an art piece. Still fun though

[@mrjed6912]

@@fillman86 That is true...but the engine on the other hand...:)

[@mrjed6912]

I wish it kept the original engine sound from automation. If you watch the Napier Bentley go around Goodwood, with the same engine and exhaust system, it sounds so crispy.

[@fillman86]

yeah, but I wanted to be more accurate to the firing order :/

[@mrjed6912]

@@fillman86That's fair in my opinion. Doesn't your engine have a bit more power than the one currently in the real Railton?

[@fillman86]

@@mrjed6912 unfortunately no one has dyno'd a railton, so I haven't seen a power graph. On the other hand I did my best to make it have the same max power numbers

[@moody9287]

How do you get all the advanced parameters in automation? like the ability to set ride height and wheel size larger than the base game sliders allow?

[@fillman86]

1 make sure your game is up to date (this includes if you've pirated it) 2 it's the button near the bottom left of the screen in fixtures called "advanced fixture settings"

[@anoop_brar]

just asking how do you find these cars like they are very rare?

[@fillman86]

you mean for video ideas? This particular engine I found because I was looking at doing a VW Audi group W engine, and I found this. Then sometimes people suggest cars, and someone suggested this car, and it worked out that I'd already been looking into the engine :)

[@anoop_brar]

@@fillman86 ok thanks

[@bloodbird742]

has someone that did some of the mods he uses, its quite frustrating to know exactly what he is looking for exist AND was done by you AND he has it, BUT he dont find it.... (THE CONFORMING LEATHER STRAPS PARTS EXIST!!! i dont quite remember at the top of my head if its in bumper or mislaneous but THEY EXIST!)

[@fillman86]

oh hahaha there really need to be a keyword search function in fixtures XD

[@fillman86]

also thanks for making mods!!

[@shantoreywilkins651]

⚡⚡🚥

[@KallmeKitty9881]

Automation: your brakes are fading Fillman: haha that sounds like a you problem

[@fillman86]

haha don't @ me automation :P

[@KateYT17]

Bro why do you only have 12k subs😂😂😂 I feel like ur supposed to have 100k

[@fillman86]

I wish I had that many :P but growth on youtube can be really slow

[@B00st3dgamingllc]

Speaking of 4 cylinders with high liters, my eclipse i sold for my miata had a 2.8l. It was slow asf. My miata ran circles around it and its bone stock😭😭

[@axemangt]

Have you already released the body as a mod for automation?

[@fillman86]

both

[@tarikGP0]

Woman: why are men dying early? Men:

[@fillman86]

XD men do have an average shorter life span :P

[@tarikGP0]

@@fillman86 most men are special with there intelligence as there best trait. And mostly smart people die. Most of which are even talked about. i can explain to you why that is, if you don't know already. It's really simple

[@fillman86]

@@tarikGP0 I'd go out on a limb and say that all people die ;)

[@tarikGP0]

@@fillman86 we all know that woman are weak. Men are testing their lives, pushing themselves to the limits. If they die, they don't mind, it was their time anyway. Death just proves that they had big balls. But if they don't die then God wants them to live. Maybe there is something special waiting for them

[@alfieupward1342]

i have that photo framed. (the one where it is in the air)

[@fillman86]

oh that's cool :)

[@13kellyr]

Basically 3 inline 4 engines put together lol

[@fillman86]

yep :)

[@NRIQ_nl]

Hey Fillman, could i get the file for the W12? Id really like to fiddle around with it!

[@fillman86]

sure, you can take it from the mod on the repository

[@NRIQ_nl]

@@fillman86 thanks!

[@Ford7315]

The v16 sounded very diesel v8-ish

[@fillman86]

haha well I think it just fires 2 v8 engines at the same time, so it packs more of an oomph like a diesel does :)

[@sschevelle1965]

Whats wrong with pushrod hensey used a ls7 build one of fastet production cars

[@fillman86]

if they had DOHC they might not have needed to lie about their speed record XD

[@sschevelle1965]

@fillman86 don't get me wrong not knocking the dohc I still think we got long ways of improvement to go with them the money to power ratio just isn't there yet

[@fillman86]

@@sschevelle1965 lol it really is there, and has been for 40 years, but north america just has a romantic love affair with pushrod :)

[@andyhargreaves2574]

19x6 19 inch diameter rim, 6 inch wide. I have seen this car at Brooklands and in action at Goodwood, the wheels are really wide for its era. The tyres were blocked treaded tyres. If you want to see something similar ish driven hard have a google for Mavis, its a 1930s bentley with a WW2 Packard Motor Torpedo Boat engine (42L) The driver likes to make smoke screens when he drives it! kzbin.info/www/bejne/rIrOf3xrdrGeaKc He also has similar era Bentley frame with that same 24L Napier Lion aero engine in kzbin.info/www/bejne/i6XSc4N-jpV_r68

[@fillman86]

it had many different tyre types over the years. Often they were custom. Now they use mundane block treads :)