This is how the Anti-lock Braking system works

Watch the full experiment here 👉 • I've made brake rotors...

[@AtulSingh-fv4uq]

ABS - Aluminium Brake System 😂

[@gumelini1]

It's lead actually

[@pauljohnson5116]

Honestly I have a 2006 Impala SS with abs and a S10 blazer 2 door with a 350 swap with Corvette break pads rotors and calipers. In my abs car goes through brakes and rotors less than the vehicle without. Meaning it wasn't the ABS fault you f***** up. That much water will never ever ever pass through your brake assembly that router was hard as hell and you probably threw cold water on it. There's difference between hot metal getting Sprayed with water vs getting dumped on it and only one side of that much pressure. .

[@kelvinmoses7777777]

Lol😂

[@whiskymusic9596]

😂😂

[@alexfraser2508]

@@gumelini1 cast iron wtf guys

[@AcousticFool]

When you order breaks instead of brakes

[@jimtaylor9312]

Underrated comment

[@partytimexxx8931]

😂😂😂

[@gwarbong]

😂😂

[@aidarsharafullin6900]

That’s good

[@Moola93]

EPIC!😂😂😂

[@55yxalaG]

For those wondering, this was clipped from a video of casting rotors of different materials. IIRC this was lead.

[@FooDerr]

Garage 54?

[@thetobi583]

Now that you say lead, the chunks coming off it beforehand and the lack of it being red hot makes sense.

[@55yxalaG]

@@FooDerr no actually, I don't remember the name but they cast lead, copper, and aluminum in the video, if that helps

[@55yxalaG]

@@thetobi583 indeed, the "stretching" whilst relatively cold

[@FooDerr]

@@55yxalaG Ah ok, I’ll look for the video

[@jayrandolph9328]

I love how this has literally absolutely nothing to do with ABS functionality lmfao

[@dieselnew1]

No shit 😂

[@tehbone8604]

Probably why it showed up in your recommended. All the comments saying exactly this, boosting the algorithm.

[@rafliduatinova]

It's the "Anti Braking System" that allows your car to not braking properly, to ensure 100% accident rate

[@Physics-vb6nz]

​@@rafliduatinova🤣

[@AlexanderCain-js9mm]

Right I’m watching the video 3 or 4 times tryna figure out how this has anything to do wit it

[@slybunz8057]

Yeah, I’m 100% sure ABS won’t destroy your wheel…

[@AustinTheGreatVR]

Yeah, also the demo kept accelerating

[@waldolemmer]

That's a brake rotor, not a wheel. The wheel has been taken off

[@Slyfox_productions]

go fast enough it can

[@slybunz8057]

@@waldolemmer ah.

[@donamanbemis1181]

​@@waldolemmersomebody get this man right here a brownie sticker

[@AnfecsIan]

KZbin Shorts spreading brain-dead information as usual.

[@rvkeurotruckmotorgamer8191]

What's use of KZbin premium if the algorithm cannot filter out trash content.

[@arafatm7277]

You are right brother. But who would believe this Garbage

[@boostedbavarian]

Dude seriously. Shorts were good for all of 5 minutes. Now, I'm done.

[@mikenike776]

Reminds me of tic tok and Facebook

[@skylined5534]

​@@rvkeurotruckmotorgamer8191 The 'use' of YT 'Premium' is to charge for what was once free. Ish.

[@torrencejackson3453]

That ain't ABS on a car. That is terminal brake damage.

[@MaNNeRz91]

It's a lead or aluminium disc 😂

[@ziggy4188]

Nahh

[@huh3061]

U missed the joke Abs= aluminum brake system

[@patrickconway2587]

Which is usually a symtom of terminal brain damage

[@Carbon420Blazing]

I'm pretty sure saw another video where the dude made it out of soda cans melted into a rotor mold

[@Poodleinacan]

On the good side, the breaks have stopped. On the bad side, the car's still going

[@p.k.953]

😂

[@BazColne]

'brakes'

[@CSBastianyGaumnitz]

No, that car is stooped. The engine is still running, and the gearbox is engaged. The tires, which have contact with the road, are stopped.

[@KeanuOR]

​@CSBastianyGaumnitz Pretty sure the wheels are connected to the bolts (that are still spinning) and not the breakpad.

[@darkheart9044]

the breaks..? Brakes...gee, I am not even from an English-speaking country, and I know the difference between breaks and brakes...

[@repnatl]

Man 3d printed his rotors to save money.

[@latinheat9454]

shit i never thought of that 🤔😂

[@skylined5534]

Did man? Good for man!

[@venzenbroshighlights3259]

😂😂

[@dave.of.the.forrest]

used play-doh tho

[@ComradeCoop]

What an idiot and spreading misinformation too......smh

[@Werdnasemajjamesandrew]

Thats how a locked up caliper works if you force the car to keep driving.

[@corne6673]

Right, like what was the point of the vid again? Lol

[@bodhiodo_]

Na dude its not abs at all the dude faked it its someone else thier video making a aiminium disc brake

[@-.-osas-san4399]

@@bodhiodo_ aluminum braking system (abs)

[@AlysaYulainda_UTC]

​@@-.-osas-san4399 That's right, it's not like discs in general, my car, even though the calipers don't come back, only the brake pads burn and rub against the discs, they don't break like that, with a mileage of 49km

[@get-clipped7842]

@@-.-osas-san4399 automatic brake system (abs)

[@JustinHuman1269]

If your ABS does this, it's officially NOT working.

[@Kinquovio]

I would say that it’s working too well. 💀

[@user-dt8or4fd8l]

Pretty sure that’s not a real rotor

[@devinnorsworthy9154]

Must be Ford ABS.

[@IamJoeTV]

You and so many are clueless to what this joke is. Aluminum Brake System yikes the intelligence nowadays is real low.

[@smolltaco5667]

​@@Kinquovionot at all

[@Reek_ove_Red]

You convinced me. I'm never buying brake rotors made out of clay again.

[@BananerRepublic]

honestly my man i was on the fence as well.... but your comment sealed the deal for me. I stand with you my guy. No more!

[@Ryan-nn4lt]

Haha

[@MihleAries-jt5is]

🤣🤣🤣🤣🤝🏾

[@ainchamama]

If this happens, your car will definitely NOT stop.

[@shamancredible8632]

it won't have to, this guy's car probably doesn't go.

[@foosmonkey]

Looks like it would stop pretty well. You won’t be able to move after that though.

[@genejeffries2888]

Yeah, at that point, stopping is pretty definite. Ever moving again under its own power, now thats up for discussion.

[@joer3963]

Correct, seems the dics have completely separated from the hub, spindle or axel. Not exactly sure what applies here. I don't think it can stop.

[@mrc4297]

​@@joer3963 😂😂 wow

[@samuraiinblack8364]

When your rotors are made from thoughts and prayers.

[@anthonybentz8770]

Best one ever bro😂

[@catalyst1247]

lmfao 🤣

[@v4riab1lity77]

Aluminum

[@Sphynx93rkn]

Lol

[@bennson5f]

Thoroughs n prayers to right and when brought your braking system from KZbin merch shop 😂😂😂

[@napalmsf]

As a former ceramic brake pad, I confirm this is legit.

[@jasenworrell6214]

I came back just to 👍

[@navysealsrecruitmentteam7107]

Wait this one's aluminum tho!

[@appletrae8307]

As a former ceramic brake pad I can confirm 😂😂😂 total English never knew you where a ceramic brake pad 😂 when can I put you on my car 😂😂

[@devinnorsworthy9154]

Ceramic is a great material.

[@armandonieto423]

You used to be a brake pad?

[@natevillagomez4342]

Dealership: ma’am it looks like you need a transmission flush. Wife: ok

[@LisaAnn777]

Also check your muffler bearings.

[@stormb3948]

How does your car stop so quick? “Luck mostly”

[@donharrus9994]

Me too...he he

[@EpicBenjo]

This is one of those shows where you have to guess if it’s real or a cake. That looks like a cake rotor to me.

[@MTNPANTS]

😂😂😂

[@killface1]

Mmmm....delicious!

[@darrenpeterson6069]

3d printed abs plastic

[@markhammer9975]

😂😂😂😂😂😂😂😂😂😂😂😅

[@Archie854]

Yup deff looks like cake to me to. Its soooo realistic.

[@sd8213]

Im never braking again. This looks very costly to just stop for a group of children

[@manfmalachi]

Hahahahah.

[@Jay2stone]

100 points each

[@rizzeldeguzman2182]

hahahaha

[@zeljkostrbac9469]

​@@Jay2stone 100 points for a chicken? Holy crap how much do I get for a pregnant woman?

[@namanshah8354]

Bro😊

[@pithlyx]

ABS - Anti Breaking System. Finally the acronym makes sense

[@Itslikethat313]

I think it’s low on blinker fluid.

[@mewtrixster9884]

It ain't got no gas in it

[@davidcarmichael2038]

@@mewtrixster9884 I was gonna say this haha

[@TabbyVee]

Just needs some elbow grease

[@iseaflames]

​@@mewtrixster9884 ummm it ain't got no gas in it.

[@ComradeCoop]

It's the Alter Nator

[@shaundrezek4330]

Yup. Can confirm this happens everytime I use my abs

[@why4100]

lmfao

[@nimo517]

Is that what it is? Been going through wheels and brakes (and cars) like toilet paper

[@shaundrezek4330]

@@nimo517 100%. Here's a tip. Don't use your brakes. Use whatever object is in front of you to stop. Follow me for more life hacks

[@andypacmanperez]

😂😂😂

[@peterarguijo3926]

😂😂😂😂😂😂😂😂😂

[@rattlesnake2345]

in all reality ABS works by pumping your breaks when it senses they start to lock up still stopping you while preventing your wheels from locking up

[@brokenwrench404]

The last thing you do is pump abs brakes

[@donheight6429]

And you still end up running into the trouble you were try to stop for anyway dumbest dam function ever put on a car my opinion you've got to know your limitations but you cant fix stupid

[@LoneStallionRanch]

"break" lol

[@caneloguero]

Thus the name antilock brake system.

[@nunyab1zn3ss2]

​@@brokenwrench404he's saying the abs system pumps your brakes, not you pump your brakes to engage the abs system

[@cjbryant9086]

If your abs does this u got GOT😂😂😂😂

[@pyrodave6407]

Your the type of person that goes in a part store and argues you need blinker fluid cuz your turn signal bulb went bad

[@skylined5534]

So close.

[@serbanandrei7532]

You're

[@jjjlll4135]

If they have a first gen viper they might

[@chilledburrito]

@@serbanandrei7532 Yaro’ye*

[@animekings4990]

Blinker fluid Rulezxzz lol 😂

[@THEKillerRyan96]

This is why I immediately remove all safety features in my vehicle because the second they turn on my rotors fly off the car and the frame melt into 2 halves and my mom’s apartment catches on fire

[@VotEtoPizdets]

Dont forget about the Bears. When the frame melts it creates a pheromone that attracts the bears. Similar to menstruation, they can smell it and they come out of the woods, in droves. Like a 3500+ herd of them at full sprint. Did i mention someone fed the bears about 50 pounds of PCP? So yeah. Dont use safety features.

[@clan_houltz]

Don’t forgot, if you remove the engine you don’t have to worry about your car needing gas

[@wolfdragon6073]

@@clan_houltzdon’t forget, just fly get rid of the car

[@user-rf1mh9hv8q]

“Moms apartment”

[@mr.minced7068]

​@@clan_houltzI personally just drink the gas and go run 60 mph

[@triaxialcape5464]

This isn’t ABS this is what ABS is supposed to prevent 😂

[@yourlocalplumbingcompany4984]

ABS is just supposed to prevent your rotors from locking up not the rotors self-destructing

[@Lugtastic]

Yeah but if the brakes weren't locking because ABS was working then the heat wouldn't have caused the rotor to warp into a square lmao.@@yourlocalplumbingcompany4984

[@1SqueakyWheel]

No, ABS can't prevent this kinda dumpster fire.

[@pickledplumfishcum8779]

@carhax-Shorts whats the fucking point of lying in the video just to like the comments that call you on it? is this some childish bullshit im too mature to understand?

[@cj.barrientos]

ABS is "anti-lock brake system" which helps the brakes for 1 not to lock completely up and make you slide, 2 abs pulsate "pump the brakes"through one of the vehicles computers(ecu,pcm,ecm), 3 they are meant to help the vehicle stop safely and not completely destroying the whole system

[@_misterpanda]

As a person who's dad is a car engineer, i can confirm this is NOT how ABS works. ABS is a computer based part of the car, which, when u break, detects when ur wheels slide and and relievs the oil pressure in the brakes on the wheel that slid so ur car doesnt rotate and hit something. And i can aswell say, ABS is ur best friend in winter.

[@fairplay5901]

This is how not to work an ABS

[@dreban]

Whoever’s car this was they got a free service hopefully 😂

[@Valient6]

Making your own brake rotor from aluminum be like...

[@juanerikestrada8286]

I don't think it's alluminum.

[@generationpakistanpeshawar]

​@@juanerikestrada8286 3d printed disks

[@skylined5534]

'Be like'? Please come home, English.

[@earls2642]

@@juanerikestrada8286 it is 10000000% aluminum.

[@danielclaggett6110]

​@@earls2642 it's lead..... not aluminum

[@politicallyinaccuratetoast4757]

This isn't ABS, this is what a locked caliper looks like when you force the car to keep going

[@mikegoodno3112]

Now kids this is why brake rotors are not made from aluminum

[@StorMRagE4EVA]

Yet this one was for a testing video for different materials and this rotor was made of lead

[@Popityman]

You can get composite aluminum brake rotors, aluminum may not be as strong as cast iron or steel but they don't do this during braking, I implore you to grow a brain.

[@mikemajoris8283]

“Get ready to hit yer’ ejection seat Ethel! ABS is kickin’ in again!”

[@mirekbator3245]

Lead rotors. Great selection sir. They are proven to stop cars from 60mph to 0 in day and a half. Excellent.

[@Hulk365-jr4ec]

Did some sit ups, you’re not wrong that’s how it feels next day. ABS kills

[@shamancredible8632]

this looks like a very intense workout for my abs!!!!

[@Ernesto_Jr.]

Very informative video... ABS works by destroying the rims + the rotor if you try to brake more than you should.

[@vdub7090]

Abs is a unit under the hood that limits pressure to the system when a sensor notices the wheels stopped spinning. You feel it tapping your foot when you lock your wheels up.

[@itshekisengpodise7722]

Hello, please help my Honda Accord CL7 is always banding wheels what causes this problem and how can it be solved

[@alex548554]

Can confirm, used ABS once and now car won't stop.

[@tls3067]

Wrong

[@ronalddavis4330]

Beautiful... i always thought it did something TOTALLY different, but now seeing this... what it truly does, i feel so much safer

[@CrazedChip]

Ahh yes, it tears itself apart

[@KylesStamps]

As a tech I'm watching this thinking .... wtf... why even do this. The ABS pump very quickly pulses the brakes instead of locking them up, which actually helps to slow the vehicle when the wheels are slipping, like on ice for example. Here they are revving the engine to overpower the brake system, causing overheating and critical failure of the brakes. This has got to be a troll post...

[@championbeam4018]

And as you can tell, if the accelerator gets stuck the vacuum assisted brakes will allow you to stop as long as you keep the brakes engaged

[@adamlentz6708]

All brakes are liquid cooled once they get hot enough

[@MECHc3ify]

Yup. Just finished up tech school. This is exactly how abs works, and why you should always oil your rotors.

[@yoplay6902]

You must have learned nothing that's an ebreak 😅 that's what happened when you drive with your ebrake on 😅 I've seen it personally

[@MECHc3ify]

@YO PLAY No. That's the ABS module, and it's overheated because they didn't put a lubricant onto the rotors. Causing it to stick. The service brakes are inside the module...

[@motorhead4663]

Think you need to go back to tech school 😂

[@MECHc3ify]

@@motorhead4663 you don't oil your rotors?

[@wex2602]

Don’t buy your brakes off Temu, kids.

[@LightwithinDarkness]

“This is what it looks like when you press the gas and the brake at the same time.”

[@theproblemsolver7099]

Why do you call it gas & not petrol/diesel/accelerator?

[@fizzodizzo5999]

@@theproblemsolver7099 american english i guess? 🤔

[@Kdubz_Auto_HVAC]

​@@theproblemsolver7099 why do you call it petrol and not gas? Stupid question. It's called different parts of the world.

[@leekzonyt9591]

@@theproblemsolver7099who in the f*cking world calls gas accelerator

[@420Sean69]

@@Kdubz_Auto_HVAC why the fuc do we call liquid petroleum Gasoline? Gas just sounds fancy despite being the wrong form of matter and oline makes it sound scientific

[@stangowner8687]

Ahhh the Irish spring edition brake pads.

[@animus444k]

I drive a 92 Honda Civic. Can confirm this is how ABS works

[@PUMAOT]

My 99 accord did this and made me crash so I feel you

[@00ninja00]

My 88 Honda crx does this with its abs as well.

[@LaKoeps]

My electric bicycle did this too. Completely melted the rotor.

[@airsoft9077]

Tip from a mechanic. This is what happens when you press on your brakes, you damage the rotors. DO NOT EVER PRESS YOUR BRAKES. Severe damage will ensue 🤙

[@aToast3r]

To be fair ABS does rapidly lock and unlock individual wheels, that's what all the clunking is when you're tryna stop quick and sortof feel like you're sliding

[@ihackedurgf]

Is that what you feel in the brake pedal when you slam on your breaks

[@jessehickman668]

This is why I always recommend not using gallium as a rotor material.

[@Jamie-ib9qc]

👏👏👏👏

[@Raofaheem22]

This is when hand brakes are engaged while driving

[@maggamelon5970]

No this is what happens if your brake rotor is made of aluminium

[@gustavozamora2196]

Nope aluminum breaks system, I slam my hand break in my drift car haven’t seen Thai yet

[@altaccount4697]

​@@maggamelon5970this is from a video about different rotor materials yeah, but this is a lead rotor

[@MrWontstopthefunk]

As someone who identifies as an ABS tone ring, I can confirm this is accurate.

[@johnplayerTURBO]

Brake disc left the chat lol

[@Sphynx93rkn]

lol

[@teonesterov9141]

A brake disk has never entered the chat, tbh.

[@gromitj]

In this example if there were a wheel it would still be spinning to this day...

[@Jodyrides]

The antilock brake system on my motorcycle worked fine. I was going down a moderately downhill, back road that was covered with fly ash. Just to be maintaining my speed, I touched the front brake. I am a front brake braker on street bikes/ ex 6 Time road racing champion, two time national champion. My point is I know how to use the brakes. I also spent decades, off-road, riding dirt bikes, so I know how to use front and back brakes on slippery surfaces, like loose shell, mud, wet, leaves, over slippery, exposed roots, etc.. as I was going down this paved road with flyash on it, I touched the front brake lever. I had no brakes.. ZERO brakes..I also was also trying back brakes..I was only doing about 35 miles an hour. I had no brakes, front or rear. So the ABS was working fine. It detected that the wheel was prone to locking up on the slippery surface, and it did not apply the brakes all the way to the bottom of the hill. There was a 90° turn at the bottom that I was not going to make. So I ran straight off and thru the grass and into a wire. fence surrounding a auto salvage yard. I did not drop my 920 pound motorcycle, but it did break the front fender. I sold that motorcycle just after that. ABS brakes are a placebo for idiots. Especially on a motorcycle where one wheel is the one that’s going to save your life, the front one. …when that stops working, you have no option except to aim for something soft-IF you have time….. that was on my BMW K 1200 LT I sold that machine and I bought a moto Guzzi Norge.. that also had ABS brakes with a difference. At the push of a button on the dashboard, I could switch the ABS braking system to conventional brakes., so that I would actually have brakes for those times when I’m on wet grassy slopes in a campground or on a road that the rain has washed gravel out onto the road or if I get caught in a sudden snowstorm which has happened to me a few times at work. I commuted to work on my motorcycle those days. I made it home fine with no ABS on those motorcycles. If any of those motorcycles had ABS that could not be turned off, I would not have made it out of the parking lot at work… The safety features dreamed up by committees are dangerous at times. another improvement we could benefit by getting rid of is traction control. Ask anyone that lives in a remote area and has a general motors pick up truck with traction control in the winter. They live out in the middle of nowhere in Wyoming, or Montana, they turn onto a side road to their home, 6 miles up that road in the snow, traction control, will not let that vehicle continue as soon as it detects snow. KZbin has many videos published by people explaining how to disconnect traction control on your General Motors pick up truck so you can actually get home if it snows.. i had a very close call on a snow day in my company car/ jeep.. I had just got gas and was pulling out onto the road carefully. I had to drive through the slush on the sides of the road leaving the gas station. There was a gas tanker truck about a football field length away approaching. I had lots of time. But my Jeep detected wheels slippage at the sides of the road as I was pulling out and stopped moving. that tanker truck laid on the horns and swerved into the oncoming lanes to miss me. I was lucky that day, because there was no traffic in the opposing lane to give the truck room to swerve… ever since that day, the first thing I do is put my seatbelt on and turn off the traction control automatically every day.. someone needs to save us from the people that think they’re saving us

[@SOLIDSNAKE.]

Ooooof, hope you didn't take the jab bud

[@ldmtag]

Idk, this Jeep story sounds like either lack of winter tires or driving in the wrong terrain mode.

[@JOSH2625]

Thanks for story time, I only read about 3 lines but thx

[@hermanogames9238]

Yeah I agree abs gets in the way at times. On my 2015 c300 it has sensor abs so if it detects the need to stop it’ll hard brake on it’s own without me even touching. Thing had me almost crash in the middle of an intersection because it went off due to a dirty sensor

[@erniegarcia9167]

You've officially won the longest comment on social media ever!! congratulations 🎊

[@ryans413]

ABS Absolutely Break S**t

[@loganmeyer8104]

This is why every time it snows your rotors are instantly obliterated, just like you see here.

[@ComradeCoop]

Ikr ☠️

[@Ccar2686]

No, it's what happens when you forget to releas the parking brake. This screw up can be a costly and dangerous mistake

[@wmsstuff271]

I do that all the time pulling away from lights. For 20 years this has never happened lol. The car just dings at me and give a warning light until I put it back down.

[@firstgradeteacher9915]

@@wmsstuff271 why are you on your parking brake at lights wtf

[@bw1841]

​@@firstgradeteacher9915 Pulling away, on a hill, with a stick shift. Hold with e brake while you engage the clutch. Shouldnt be letting go the button, though.

[@MiloCraft123]

@@bw1841if you need to use the ebrake on hills you should stick to aj automatic

[@HapaHeritage]

@@MiloCraft123 On some steep ass hills with a classic manual (no hill assist) I really would like to see you try😂

[@dailydrivensedans4875]

How abs works: staring abs plastic rotors

[@Mercmad]

I'll remember this next time I call on the ABS to work.

[@theuksymphonix7151]

The real title of the video: This is how the ABS system is destroyed..

[@AhmedBadani.]

Imagine if you were walking on the highway at 320 km/h Then this happens 💀

[@shockw6ve570]

You can walk at 320km/h?💀💀💀💀

[@lizardlord6560]

​@@shockw6ve570 imagine if he started running

[@shockw6ve570]

@@lizardlord6560 bruhh😂😂

[@Keetonsworld]

@@lizardlord6560😂😂

[@user-zq6ht4fv1o]

I better go and remove it immediately

[@HansBelphegor]

When someone misunderstood what leadfoot meant 😂

[@kamikrazywarboy2008]

Them cast aluminum rotors is all I use.

[@graham1188]

Hopefully I don't ever have to slam on my brakes, that looks expensive

[@adi6893]

You should really think about driving if u think this is how it works😂

[@graham1188]

@@adi6893 I was being sarcastic

[@MrRobo1980]

aluminium rotors dont exist for a reason

[@mattjohns3394]

They do, they are just uncommon. The one in this clip was installed "as cast" no machining, no balancing.

[@alexb5548]

And that's why the brake pedal is purely optional

[@FC0BCA7E7A]

As a professional KZbin commenter, I can confirm this is 💯 percent correct

[@chrismurchie2388]

No this is a aluminium rotor.

[@Sam-ob4of]

*it's lead actually

[@johnvanberrgem286]

😂😂😂 aluminum disc. Seen it before.

[@JacobLeeson-zk1ol]

This one is actually lead. The aluminum one wasn’t that bad

[@zebulonjohn1]

The failure mode of my ABS is far worse than not having ABS at all. Damn near killed me, disabled it and now have brakes that aren't actively working against me .

[@k.debbarma315]

In this case you need ABS ( Anti-Breaking System )

[@skylined5534]

Icey what Hugh did dare!

[@shrishailkatti3197]

When you forget to release the acceleration pedal. And still pressing the break pedal

[@Sam-ob4of]

*brAKE

[@MikeJack20]

Sick burnout

[@pussymonster6707]

This is why you go to mechanic with one issue and he finds 5 more😂

[@coreyherrin8542]

It’s showing how it opens and closes rapidly instead of just locking if the rotor was the correct material it wouldn’t make all the noise and whatnot. (Observe rumble noise)

[@charlestonsoke3484]

This is what happens when you brake and accelerate at the same time.

[@Popityman]

Not even close.

[@fynn1202]

Ehmmm... No...?

[@marcel13091975]

The material ABS, right?

[@thegiantgaming7592]

Aluminium Brake System, yes.

[@jarydjackson8531]

Correction, this WAS how ABS WORKED with an aluminum rotor for about 5 seconds

[@Popityman]

Not aluminum.

[@sarthak5707]

ABS - Automatic breaking system

[@heckj78]

Antilock braking system

[@jeffreydavis5506]

simple and effective.....cost friendly too!

[@bradbeck2601]

Took me three watches to realize that wasn't water spraying onto the rotor to keep it cool.

[@geemy9675]

thanks I always wondered how it worked

[@joshward5286]

This is why my abs lights on

[@Roach_Dogg_JR]

Bro turned his brakes into a square rotary broach

[@leblancsean1]

Finally, a good video on ABS function!

[@paulfarinloye454]

after learning about abs today i can confirm that abs includes both wheels not just one to reduce the yaw and pitch of the vehicle

[@somphothbsiratsamy3748]

Yeah that happened to me. Rotors broke off the hub, they didn’t melt.

[@Voxeldatprotogen]

Ah yes the abs breaking your break disks

[@USMCPL]

As a current menace to society on the road regardless of rain sleet or snow, I can verify this is NOT how ABS works

[@shaggy1632]

Anti breaking doesn't do this at all, it's on a gear system that makes breaking patterns to help slow down the car rather then locking up the wheels when there's no traction 😂

[@coopgames0830]

How to resurface brake disks the cheap and easy way

[@dn5448]

4 nuts on it Those nuts havent haven't stopped spinning Wheel would still be rolling 😱

[@thatdude6045]

Abs does not do this to a rotor and this rotor was cut from a larger video showing rotors cast from different materials. This rotor was made of lead

[@codyschwoch5451]

I’d like to point out the fact that that is not testing just ABS brakes systems that is testing aluminum brake rotors instead of steel brake rotors like they all should be

[@Popityman]

This isn't testing aluminum brake rotors nor abs. ABS or anti lock brake system flutters your brakes while turning and braking to stop wheel lock and there are such things as aluminum brake rotors specifically aluminum composite rotors, they do not wear this fast.

[@Popityman]

Also most rotors on the road today are cast iron steel rotors are usually only used for performance applications.