This is NOT The Mining Truck's FINAL FORM! - Scrap Mechanic Survival Mode #15

[@SynFlood0]

_Sorry for the rant but I have to get this off my chest ^^_ Honestly, all these people I see talking about you stole this from kAN, this person stole this and that person stole that, are really hurting this community. Not every single person has to innovate on everything, just let them play how they want to, let them take inspiration or copy stuff 1:1 and the content will be better because they can play as they would off-cam which makes the videos more genuine and enjoyable. Same with their base/ their farms/ their vehicles etc. sure you can make suggestions and I think those are really appreciated and helpful. However I always notice people under every single KZbinr's video saying that they should build a mobile base, or improve this, or build a boat, a flying machine... whatever it may be. Just let them play. Just let them build what they want to build, when they want to build it and however they want to build it. Again, suggestions and Inspiration are perfectly fine but making demands or shaming/hating on someone for not playing the game like you want them to? Not cool!

[@harrisonreber6936]

Moonbo actually said “I will play scrap mechanic like I wanna play it” it’s so true it’s their game let them play it the way they want to

[@jayykeyy]

well said good sir/ma'am. If I could like this more than once, I would

[@soullesscargo261]

Agreed and they all play together anyway. I personally watch all of them lol.

[@fllarecoffey]

I fully agree.

[@viniciusschadeck2204]

plus, diferrent person can comes with the same idea, because the minor components are universality util... in my miner vehicle i want it in first person and i put collector in from of it and seat over it, put the drills really down and then i noticed people already use this configuration... i not want copy anyone i just did what looks work better with the resources i had... if i had more drills i kind will did some arms with it, because slide down is really pain in the as on hills and i not now a better way to do it... put more wheels not looks like will help, put a lose bearing to keep drills in contact with ground is other idea to help mining the small ones, but it not helps in slide stuff anyway, because of that put armos to grab rocks is really usefull

[@samuelkawamura2828]

What about putting bearings on each arm and use it to angle like 30° so when you cut the rocks just press another button and face the drills to the ground. I think it should do the trick for grabbing the smaller ones.

[@Jonas_Mikkelsen]

Good idea

[@jovn7732]

i use that one

[@NicoleJackson4481]

The mining vehicle reminds me of a sea scorpion XD

[@paganathiest6349]

i was gonna say like one of those beetles with the pinchers

[@LTL_king]

Put some shocks on the drill so it doesn't go crazy and bounce all over the place. They a more stable and you wouldn't need the pistons. The drills will stay pushing against the rocks. Place a drag wheel on the drill arms to lift it just above the ground. Like the wheels on your chair stands or similar. It drags behind in 1 direction and free rotation. Around the middle or just behind the middle of the arm. Wherever it brings the arms just off the ground so it doesn't drag. You could set your drills to 1 block higher and put a bearing on the drag wheel to rotate a few degrees when you want to get a little lower or higher for terrain. Using that wheel will help you going up the hill. No need to charge up. I placed my resource collector just behind the drills and you could put your seat on top of it for view. 3rd person it really doesn't matter where you put it but I use 1st person mode and look through the resource collector. Not same design though.

[@wumpie5267]

Moonbo, you should build an underwater vehicle. Engines work underwater, you can put pistons under your seat to raise yourself above the water to get oxygen. Of course your vehicle needs to be heavy enough to sink. Having a underwater vehicle is much more fuel efficient as it doesn’t need thrusters.

[@soulreaper1981]

Hey moonbo you can replace the mining drills with the saw blades when you want to gut down tree's. They work on the side's just as good as on the edge

[@Drew-uv2zi]

You could probably use bearings and suspension to allow for the drill assembly and wheel axel to bend so when you drive up a hill, it will bend and stay level with the stone bases. Also angling the drills just slightly down may help get those little annoying pieces.

[@Chevroletmontecarlo]

Us: oh good its not gonna evolve again Mining truck: *ACCTUALLY*

[@corbinclark1770]

Moonbo can you make a flying scouting vehicle

[@noname-cc5vl]

Corbin Clark that would probably be hilariously expensive, you would need so many lv5 thrusters and fuel

[@jeggrey]

I bet he could, it's not as hard as you would think, especially if you plan out a good system in creative before

[@aaron_n6310]

iAmazingFang but there are no mods in survival

[@zacharybaker770]

the amount of resources to do that just to fly at the same speed as a car is just not necessary.

[@Josh-oc7ib]

@@zacharybaker770 It's not necessary to use it as a daily form of transportation but it's necessary for warehouses.

[@kadboodle]

Moonbo. I love your creations. Would you consider making a rock crusher, like those industrial grinders in irl? So you could just cut out the bottom of formations and drop them into a grinder?

[@kadboodle]

Akin to your lumber mill, I think a rock crusher would really round out your factory!

[@TheGamerGuyWeri]

No n crusher is boring he should just do it normally

[@derpthebugbear]

Have you considered making a grinding pit? Like your lumber mill, but for stone. So you detach rock formations from the ground, then transport them to the pit for harvesting.

[@sophiatagalogon5005]

me when i look at channel pic: the final form is blocky??? me when sees transformation: THAT TRANSFORMATION IS OP

[@ratheonhudson3311]

The twin refineries combined with an efficient bearing use make this have less lag than mine does. Well done.

[@thesilentwarrior2262]

Hey Moonbo! Great video! Keep up the good work!

[@the_Acaman]

Make it so the whole front section with the drills can go up and down with pistons so you have even better control. Making it extend to the front is a good idea to for the hills. That's what I've been doing and you don't even need that many drills to get it done fast. Also, if you are using an electric engine for the drills, try to set it as slow as you can while the rocks still get destroyed. It can go pretty slow tbh and the speed doesn't change a bit for the rock cutting

[@cubu1946]

well you see moonbo... a vehicle on a hill with dirt grass, tends to slide in reality too... thats the physics right there... but the grip when driving up hill should be more yes definitely

[@LakierosJordy]

I added a claw like system on the front that will grab and pinch the rocks, then lower drills into the 'hole'. It literally pulls up to the rocks, best solution I have made up. its about a perfect size for a big square chunk and as it breaks down into smaller chunk the grabbing system holds all the small chunks in place as I drill them. Literally takes seconds to process a square chunk

[@Exis247]

You can save on fuel if you use a max speed controller to spin the drills. it goes just fast enough to break rocks and damage greenies.

[@maikeliebregts2213]

Moonbo: mining truck's final form Me: wats the powerlevel? Moonbo: it's over 9000 !!!!

[@arsnole3942]

So I have 4 updates that you could do 1 is the suspension because you were struggling so maybe raise your suspension a Little bit on both your vehicle and your trailer 2 on the top part of your drills maybe put another row so that you could mine faster and bigger rocks it may be a little bit laggy but I think you should work and 3 you’re collecting barrel I noticed as you put it in front of you at nighttime it cut off a little bit of your light and I know this isn’t directly mandatory but maybe put a couple lights there and for the fourth one on the back of your trailer where the chests are I noticed you could put another chest or a gas tank it’s your choice

[@danbreakout]

I realized that drills work better if the "vehicle" is anchored to the ground (or maybe when you are off the vehicle). Did you notice a different behavior of the vehicle if your character is in or out (like slowly sliding from hills)? The downside of anchoring something, like a robotic arm, is the time you waste welding/removing along the rock formation. Wheels and drills currently aren't friends, for some reason (maybe this is the reason for drills efficiency inconsistency).. Awesome mining experience tho, I think this is truly the best you can achieve with drills on wheels, Gratz.

[@arivers1308]

Love the series

[@hitech7772]

I only have one piston on mine and I’ll freak out, also. The sliding down any incline is new and it’s so frustrating. Love you videos.

[@manjugangwar7245]

YOU DESERVE MORE RECPECT

[@splitdiceyt9236]

*RESPECT

[@RoelNicky]

Rocks reacts different with the welding tool, you have to put more blocks to distance them from objects to be able to delete blocks. The last few blocks that you can not unweld will come loose when you destroy the rocks

[@edoardocena4158]

To prevent the rocks from falling out of your arms you can make a sort of press filled of drills to get all of them . You are crazy, i realy enjoy your videos.

[@brianfox340]

You've inspired me to build something similar. I love the lobster arms and mobile refining. My only idea to improve is to make the two in the center 2x2, and making the sheet they are on fold forward to become flat to drill DOWN onto the bits on the ground, since those are the cause of 90% of the difficulty in collection

[@rocksfire4390]

i don't see suspension on each drill. i noticed that putting suspension on each drill bit helps massively. it reduces the knockback the drills have when they hit stone at high speed. this will keep the drills on the stone longer which helps break it faster. it also should stop the entire front of your miner from shaking. hills are the biggest problem with miners. my next miner is just going to park over a rock formation and lower itself down onto it with drills on the underside. this way i don't even have to move the miner xD

[@unclegsworkshop9270]

Moonbo, I found making a post in the ground, welding the mining machine to the post and using pistons and controllers to reach the rocks. You will probably have to make several posts and re weld as you go. It saves alot on gas.

[@Ragglemcsnics]

I've noticed that when you have drills on suspension don't don't work very consistently. I get much better consistent drilling when I take the suspension off.

[@giin97]

Additionally, tools spinning at a constant rate are far more effective. The tooltip that gas engines are for driving and electric engines are for tools isn't just fluff. Even placing a drill on 2 stacked bearings linked to a controller performs better for me than connecting it to a gas engine.

[@OttosTheName]

Regarding the pistons freaking out, I would say since 0.4.0 all bearings, suspensions, and pistons behave quite strangely. I've also seen more piston freakouts in the last week, but I feel like a lot of old physics bugs that were fixed years ago have returned. I guess they fixed them once, they can probably fix them again, but yeah all piston/bearing/suspension behavior is broken as hell at the moment.

[@rogertucker7030]

Part of his problem is he has bearing>piston>drill which causes the piston to spin which freaks out the game, if he changes it to piston>bearing>drill it gets rid of the freak out. Everything still acts strangely but not as bad.

[@jovn7732]

Moonbo i have learned so much from your channel and tour content is amazing👍👍

[@Josh-oc7ib]

Only thing that makes rock mining difficult is the inclines.

[@somewhereburningout]

I’m quite late, but a fix might be a few bearings to move the drills upward, or pistons to lift the wheels

[@Psycorde]

Or the absolute lack of grip on the wheels with that material, it's stupid

[@c_death]

Love the drill car, that is such a good idea with the movable collector. Try putting the bearings directly on the drills instead of behind the pistons, that may help. Also about sliding on the hills, I HATE THAT, my cars are always moving dozens of feet or even ending up at the bottom of the ocean ALL THE TIME.

[@ninjham1029]

You should make the drill arms pivot up and down so that you can get up hills easier and if rocks are on an incline then you can lower them instead of them sticking in the air

[@orchanavb]

Maybe, because of how long it is: Make the back wheels turn in the opposite direction, for sharper turns. It helps with bigger/longer/heavier builds. I hope it helps!

[@alanboee]

Moonbo you should put the container lower so you can drive on them AND you can move it to the front, so that way it's doble efficient. Like scrapmans mining vehicle. So that way the container can reach the materials but not make it so it bottoms out more often, be careful.

[@picklesteve2313]

I think the reason the pistons are freaking out is because you are spinning them with the drills, prob be more reliable if it goes, "piston->block->bearing->block->drill". so that the pistons don't spin.

[@marcellchilds553]

could allways make a suspension to level out the care while mineing if the car is on an hill then the back suspension goes up and if on a down word hill then the front gose up :p

[@shadowed4042]

9:08 (sorry for the random time) a random unrefined stone spawns in to the left of the creation

[@brendansheppard5157]

lol i had to slow down my playback speed cus i didn't see it

[@emeralddagger5140]

I don't even try to go to his videos. But autopsy always ends up here and I enjoy every time

[@magpiestoner5693]

I just started playing and I added suspension to my drill arm and it really seems to keep greater contact between the rock and the drill... perhaps you could do something similar in place of the pistons and simply clamp the pincer together against a rock that way your drills conform to its shape.

[@ItsthePfitz]

Maybe built a rock-crushing-station at your base, like you did for the wood. Maybe that way the little rocks cant get away and the ressources will get picked up immediatly and that maybe more lag firendly?

[@drive_6665]

I wish there was some sort of hydroponic crop system in the game, so you could have a true moving base. IDK maybe make it a little more expensive than planting on the ground, maybe it would need to unlock some tech before for doing it, but I think it would be really cool

[@rowieforms]

Haven't seen a mining vehicle have too much success with those rocks on mounds. Gravity is a challenge since it will cause you to slip and have much positioning power while trying to get to the rocks. So far, the best success i had is just using a robot arm to drill the big pieces of the top then maybe push them to level ground. Then have a vehicle with drill bits pointing downwards and crush them.

[@the_silvermario394]

I love your vids ❤️

[@codyholum3993]

Close your eyes at 12:58 and just listen it sounds like some thing different is happening

[@tankboy2523]

Ok then of kind of weird honestly I never thought of that kind of dirty😏😏

[@miliamragay4711]

Huh

[@jayykeyy]

omfg that's so dirty and hilarious xD

[@ailehunter]

Oh look guys, its the "Stag Beetle" Miner. XD

[@squallstopher608]

Stag beetle is way more efficient

[@StevenIngram]

Hmm, I get the sense that the drills are glitching because they're all extending at once while being deflected by the rocks they're trying to chop up. And so their own geometry is overlapping with the neighboring drill bits causing them to flip out.

[@ddssrr1614]

I copied your drill design. But i changed the vehicle to have collectors & the refinery right behind the drills. So little time saves & less lag as it grabs most stuff right away as it breaks. But the drill design is amazing. Works better then anything i could come up with. Ty for the inspiration.

[@DarinLawsonHosking]

Nice mining rig and love the resource collection idea, will add that to mine

[@JermaineKnew]

Hey Moonbo, great video! Maybe you consider carrying 3 or 4 small explosive barrels with you for especially tough to reach spots

[@kylehicks674]

Kind of late on noticing, but what direction are your arm drills rotating? If they are turning counter clockwise (while looking at them as if you were in a claw) then they are probably shooting rocks forward, away from your vehicle. It's hard to tell while moving so fast, and I didn't see the connections.

[@JoachimVampire]

thank you for the imput on the logic gates on the farm :D (i know i'm one week later) also the farming vehicle looks sick hahaha for those who coment that it feels copied... well, they are watching your videos, right? if they also play the game they will be obviously influenced by your content, so basically it's hypocresy. for example i had a similar farm but thanks to your videos i've modified it slightly and gave it a few tweaks and now it works flawlesly. if they somehow need help at any point they won't be able to ask for because they will be copying other players ideas according to their own comments

[@Redinator]

If there's no name for the mining vehicle, name it The Stag Miner. It looks a lot like a stag beatle.

[@sebastiansandoval4861]

id say lobster

[@Hosteggy]

I just made a drill version of my saw machine. Suspension works great on the saw machine but rock is another story. I got rid of my suspension completely and it's so much better.

[@rjfnc]

@moonbo How were you able to connect to the resource collector? I don't seem to be able to do it.

[@raymundoii]

Can't you make a similar build to the wood chipper, except for stone? Like a huge bucket that uses wheels or something for the conveyor system?

[@lavorg.3711]

i thought the same thing!

[@saeklin]

I wonder if the drills really have to be spinning, or can they be jackhammered into the rock. Or if you can simply ram a rock formation at high speed will the force of the impact do the trick? Stacking multiple pistons and upgrading them to high speed then putting that on a fast timer might produce a viable jackhammer.

[@skideeke339]

Dude that intro is the best

[@-Taxi-]

Last episode: I’m gonna make a fully automated farm to help improve my wellbeing and help my overall efficiency This episode: yo screw this rock man

[@excitedbox5705]

Don´t move around so much while mining and keep the arms open. If the rocks move they don´t get contact with the drills so moving less gives them time to settle. Also should add more drills coming down from the top so it pushes them down and you will more than double the speed. I have seen people mine an entire formation like that in under 2 minutes. Your technique is really inefficient. You should have been using the V to break it up and only push forward so the back drills break it down. Most of the time at least half the drills were doing no work because they made no contact.

[@peepee778]

rocks dont move fam

[@magentamappinganimation9532]

beep boop maybe he’s talking about the disconnected pieces

[@ryankl1984]

the sides of the drills do far less damage as opposed to the tip

[@GamingWithBill1]

MoonBos mining drill has finally unlocked it final form

[@defaultdance1628]

The version before this This isn’t even my final form

[@splitdiceyt9236]

duh, isn't that usually how it works?

[@adamferris4780]

@Split Dice YT Yea wait now that you say that...

[@isaac9220]

Just a random thought. What if you built something like a drivable saw mill for stone. Use the weld tool to put them in some kind of crusher

[@vinitatore5245]

i feel that the mining vehicle is based of an actual mining vehicle but i dont know what. Also , add saws to the mining vehicle , so you can mine both rocks and trees.

[@JoeMama-qd1zg]

Nice

[@scottsanders4589]

LOL you said that you want suggestions on your build butt in the previous episode displaying the mining truck you said not to give you suggestions and let you play the game and then the way you want to play. Now you want suggestions on your car LOL I'm just poking fun. Your car is amazing

[@marcellchilds553]

was just thinking of something that might break the game when I comes to farming would you be able to use thermal rocks as a defence on your farm as it can only be broken with a drill

[@lavorg.3711]

You could make a base off of the ground and make it connected to the rocks. so the farmbots cant break the supports and make it fall

[@naeem6583]

Thermal rocks? Where do I find that?

[@adamferris4780]

@Marcell Childs That sounds good except for three things: 1) Bosses/Tapebots MAY be able to destroy those stone pieces/damage your farm anyways, 2) You can only place soil on naturally-spawning ground, so an elevated platform wouldn’t work, and 3) unrefined stone, wood, metal, etc. eventually despawns, and it is a known glitch that anything attached to these unrefined materials will often despawn with it. That’s why it’s important to make a resource collector for mining, rather than just placing the materials on the sides of your car. Overall, you definitely COULD use the unrefined stone as a defense, but it would really only work as a wall SURROUNDING your base/farm, and you would have to constantly rebuild the wall as parts of it despawned.

[@giin97]

I've had haybots break through untouched stone resource blocks many times to get to me. I'm sure they wouldn't slow a bossbot down any better. I

[@nuclearbaguette6646]

I love your vids!!!!

[@TheWheatley]

very body gangsta till moonbo takes out the miner

[@KurNorock]

It's not just you. My pistons AND bearings freak out all the time. Sometimes so badly that my creations literally explode and parts fall off.

[@sstero4892]

You should make the drill section go up and down with bearing

[@tuckerdill1538]

Could you do a full tutorial on the automatic farm system? I’m a big noob at scrap mechanic.

[@pmchad]

Ultra Instinct Shaggy Vs Ultra Instinct Miner Truck

[@paganathiest6349]

"and here we got a line of rocks" he says when hes just getting to the party

[@FishinUpNorth]

Hi moonbo I love yr vids

[@puppyfilms277]

Hello moonbo I love your videos awsome youtuber :D

[@floppi7098]

Moonbo: * talks in english* Captions: imma talk in Vietnamese but instead corrupted english

[@JohnBryce26]

Any tips on how to build that piston resource collector? Can't seem to make it work. Can connect to one piston, but the other doesn't want to work :/

[@lucien3348]

Add an option to angle the drill on the front arms so you can drill the small bits of stone

[@krundug2848]

you cant break block that are welded to stone, you have to destroy the stone to do it, you can use tool stuff like i beams to weld it to and then remove the ibeam

[@atarool]

I love how he respects all his fellow youtubers

[@FishinUpNorth]

Subscribed and notifications on all

[@marcellosuryantara2853]

moonbo if you getm the glitch where you cannot break blocks, try holding another item in your inventory. it happens to me too but if you switch items it seems to work again

[@brendansheppard5157]

Free Tip: their is a gold loot crate on top of the mechanic station you are chilling in like so moonbo can see

[@tobiasfischer6309]

Dude the perfekt way to smasch rocks down to is a suspension than a drill :)

[@coastalgaming1594]

That vehicle is amazing. On the other hand, man this game is punishing on resource gathering. I suppose for just building a vehicle that is a lot of resources but for a building that was a small amount of resources.

[@Edward-gc3hs]

Hi, i have the game and i see u dont need that much power on drills so i recomand to use a electric engine upgraded and on gear 2-5 and will be much more cheapper

[@connerplake3550]

You need explosives in order to get to the shut down switch for the warehouse so you can take things from the warehouse I have screenshots of where the panels are

[@archwolf3835]

Moonbo just wanna let you know that diesel unlocked the warehouse with console commands because he wanted the blocks we were promised. I am just letting you know.

[@goobertfroobert5572]

I know I'm a bit late with this, but I think it would have been a lot more stable and productive to have made a separate attached vehicle that works almost like a crane with the drill mandibles attached to THAT rather than the front of the primary vehicle itself.

[@goobertfroobert5572]

Might actually use that idea myself... I'm such a big brain.

[@yellowcombatgaming]

Make the drills part detachable and making a lumber set, making the vehicle modifiable

[@swagerBF3]

Hey, please i need answer ! How at 5:53 he happens to have a movement perfect with collector ? (He Talk about it just before but i'm not english and i don't undestand.) Because me i can not to have all this part welded and suddenly when i press the button, just one arm go away quickly and the other raise the collector alone, so how can i do to weld the whole for collector part. I'm sorry for my bad english Thanks.

[@joelrobe5498]

considering your refining as your going. this is very fast. I'm still having to get off and smack the smaller ones to bars using a robot arm

[@w.binder-freecadchannel]

Very nice! 👍

[@avrahamkrichevsky4831]

AWESOME!!!

[@archwolf3835]

Oh and trader cages have a welding point on them

[@mobilevadr6857]

Mining Truck during other episodes: This isn't even my final form!