This Is Why Your Oil Change Takes So Long: Mechanics at Work Funny Moments & Fails Compilation

These are the Best In the Shop Mechanic's Funny Moments & Fails Videos.
Over time, we've received numerous entertaining videos featuring workshop fails. Now, we've compiled the best mechanic repair shop fails and funny moments ever captured.
Wishing you all a Happy Halloween!
#mechanic #funny #fails
These videos are intended to be both educational and entertaining.
Here are some cheap tools that I use daily in my workshop:
Plastic removal toolset:
s.click.aliexp...
Torx:
-Torx Screwdriver Set from T5 to T30
s.click.aliexpr...
-Long Torx Screwdriver (use Torx t20 to remove the car exterior door handles almost all cars have this screw)
s.click.aliexp...
Small Electric Drill Cordless Screwdriver:
s.click.aliexp...
Hooks:
s.click.aliexp...
Flexible Magnetic Pick-Up Tool:
s.click.aliexp...
Rubber Eraser disk:
s.click.aliexp...
(I use this to remove old Stickers and double side tape left on the car after I remove badges)
LED Flashlight:
s.click.aliexp...
Infrared Thermometer:
s.click.aliexp...
WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.

[@Carhax]

Send us your videos/photos 👉 carhax-video-submission.com. Hope you enjoy the video!

[@johnrobinson9711]

Holy crap!!!! 10mm socket, we're all saved!!!! Men will speak of this day for all of eternity.

[@jeffbroders9781]

At 1st I thought that ws going to be an undamaged 1/2"😅

[@Anubis78250]

I still refuse to believe it. That has to be some sort of optical illusion. I've seen things over the years, I'd have to touch it to be sure.

[@Fevebblefester]

So that’s where it went.

[@dddevildogg]

Well at least now I know where it is.Thanks

[@andrewkotcher5704]

Indeed they will, and god shined down upon man a lone 10mm socket!

[@125AXer]

The guy lifting the pickup that fell... How could he not notice that it was going so wrong? There was a ton of warning time, if he had been paying attention at all.

[@140630vk]

Probably on his phone

[@BrwnShinobi]

me yelling to the comp, "Bro it's weird, stop!"

[@zenithperigee7442]

@@BrwnShinobi , and some people are just "weird" and need to STOP but oddly they don't. I've seen instances where people will literally "watch" something going awry and they do not intervene in any way as if they're "paralyzed" until whatever bad thing is about to happen "happens."

[@dave-d]

So weird to watch. I had to wait for a mate to come over and actually see me on fire inside the skip I was welding before he went and got the fire extinguisher I was yelling out for! Ho ho. Watch out for each other ladies and gentlemen! @@zenithperigee7442

[@doughboy4681]

Yeah smh. That's wild

[@xroda_]

The pole hit the poor old man 2 times LMMFFAAAOO😂😂😂😂😂

[@Carhax]

🫨🤣🤣

[@bandido7994]

Looks like scene from the 3 stooges.

[@supericeman1]

I shouldn't laugh, but it's to effing funny!

[@3644Darrell]

The guy putting the pole up is an idiot

[@robertgraham5486]

That pole hitting that poor guy for a second time ….had me laughing out loud

[@yuriparasite1344]

Legend has it that apprentice is still looking for the leak on that tyre.

[@bobbg9041]

We had guys like that in the press room, they useully didn't last a week. Honestly you can't have someone that naive working around heavy macharinary because One careless mistake could cost someone there life. My uncle owned a very large machine shop, both cnc and conventional machines. This guy he hired from haundurs Had been drinking on the job he was turning a very large part on the lathe with tight tolerances, but he was using a divider you use on wood lathe to measure the outside dia with the lath running. 6 other lathes in a line operator to back of lathe. I turned his ass in. He got fired on the spot. Im not running machines around a drunk, but deffently not around a drunk fool. If the divider was grabbed by the spinning part at 32k rpm it go into the face of the guy behind him. Nope don't work around fools. The shop is not a playground. Id fire anyone of a number of the guys on this. You can't teach stupidity out.

[@patpatpat1336]

You know what tires me all the people who spelled tire wrong or I guess I should say spell tyre from Canada or Europe

[@robloxfan4271]

8:26

[@abegiesbrecht1148]

Best comment here

[@andrewkotcher5704]

omg right i am wtf, great technique but poor execution.

[@sjv6598]

That gas bottle near the end of the video, they are very lucky people!

[@dave161141]

I'm not familiar with american color coding, was that acetylene?

[@wallywest2360]

That color is usually used for helium. But that tank had a yellow spot at the top, which could mean it was some type of mix. Color codes in the US are somewhat standardized, but I've seen shops make up their own standards. Not OSHA compliant, but OSHA doesn't show up unless something really bad happens.

[@sjv6598]

@@dave161141 it doesn’t matter what was in it, it’s the power and speed the cylinder has once the valve is broken off.

[@dave161141]

@@sjv6598 There is a little difference if it was some "harmless" welding gas or something highly flammable.

[@rearspeaker6364]

@@sjv6598 MythBusters did that, went thru 2 concrete walls!!

[@2coolwheels139]

I was an auto mechanic for many years. And pretty much every one of those things happened to me at one time or another. Thanks for the reminder, LOL!

[@whiterook8022]

Ditto. Except using the Cheetah in the toilet, wtf

[@RedArwBus]

i worked at an auto parts store that also did repairs and they had a car that wasn't put on the lift correctly and when the mechanic put the lift up the front of the car slid off the lift and wound up facing with the back half facing up and part of the lift punched a hole in the engine and took 75% of the front end off the car,we had to get a heavy duty wrecker in to get off the lift,after everything they fired the mechanic,the store manager,and busted the assistant manager because he was supposed to be in the shop helping,NOT playing with a nice looking woman in the store who didn't buy anything,eventually the no longer assistant manager left and i found out that he left the auto parts industry and manages a gas station that only sells gas and no repairs

[@faraon2012]

I say, mentally derange and drugs is out of control usa 😢

[@bostonrailfan2427]

you guys spoke in monkey calls too? 🤣😎

[@whiterook8022]

@@bostonrailfan2427 lol - monkey calls, dog barks, bird calls.. mostly 4 letter words though

[@andye5724]

01:37 the truck is already leaning.. wtf this guy looking at?

[@Agecatcher]

i would guess that lift does that sometimes/

[@badazz2969]

No lift does this it is usually lazy on one side but when they have the car off the ground they lift at the same rate something was really bound up

[@andye5724]

@@badazz2969 lifts usually have adjustable pads so all 4 can make contact when lifting. Then I put a long standing jack at the end. Tho this was back in the day. Lifting trucks is scary thing.

[@Natd0gsef]

Specially the old toyotas that got real bad frame rot

[@Yokonato]

It was heavily leaning and there was popping noises , all indications he should probably stop the lift and lower it 😂

[@OzFrog48Z]

The guy dropping the Corvette on the ground didn't even wait to be fired. He just walked out the door.

[@TheSaturnV]

That looked like a rich man's toy garage. Vetter was surely totaled.

[@davidmilne9738]

That shop might have a policy, you break it you pay for it.

[@bensheard3969]

He's thinking about what his new identity is going to be when he moves to Mexico

[@Jeff-sp7bg]

I'm sure insurance covers it but still

[@jondurrett9277]

I once saw a guy put a tire in a dunk tank looking for a leak. No rim, just the tire. I asked him what he was doing. After he told me he was looking for a leak i had the displeasure of explaining why he wouldn't find it. He didn't last very long. Also, guys close and lock the drawers on your toolbox before you move it. They're expensive and have expensive stuff in them.

[@jenkathefridge3933]

And if they fall its a pain to clean it up

[@Quantum-dv1ng]

It's truly amazing how many people don't understand how center of gravity of works.

[@dieseltu1035]

i seen that too a tire in a tank with no wheel . And a tire with no wheel but he's spraying leak detector on it

[@FenderShredder]

@@dieseltu1035 spraying leak detector on it... you must be the apprentice in the video huh

[@evelynsahoe8896]

When I first started working for Lexus I saw an older tech in his 40s looking for a leak on a tire, I shit you not the rim had a hole in it I could put two fists in 🤣🤣🤣 poor bastard must've been going thru something or boozing before work.

[@shaunmcdaniels2460]

Having grown up in an auto shop, starting with being the shop grunt, and working my way up into repairing the equipment for several brand name suppliers, I have seen every one of those accidents at least once… My favorite is when they blame the equipment for the failure!!!

[@Carhax]

Equipment troubles: the real stars of the shop drama!🤣

[@diegomontoya796]

Righty tighty, lefty loosey x4. That'll be $800. Fvck mechanics.

[@R1chardB1ngham]

As soon as I saw that ray of light I knew it had to be the 10mm socket

[@Nordic_Mechanic]

yep !

[@assai74]

I laughed so hard

[@afridgetoofar1818]

As a non mechanic, what is so special about a 10mm.

[@kostandinostsakiris5458]

@@afridgetoofar1818 its always getting lost. You buy a new one, whoops, two days later lost again.

[@keltoi30]

@afridgetoofar1818 The 10mm sockets always disappear never to be found again. Its like they drop off the ratchet and enter the 4th dimension.

[@Darth_Chicken]

I'm surprised there are any mechanics still left alive.

[@trosper4676]

The pole hitting the Man twice killed me I was rolling on the floor laughing I think I cracked a rib

[@Carhax]

🤣🤣🤣🤣🤣🤣

[@SwapPartLLC]

Lawsuit.😂

[@70sboy98]

Me too, my wife told me to shut up but I couldn’t stop laughing.

[@trosper4676]

@@70sboy98ha shit was great tho wasnt it bub

[@tinknal6449]

If that was me there wouldn't have been a second time because after the first time that pole would be so far up that guys ass it ain't never coming out.

[@catfish24]

The poor old geaser that got hit by the fallen pole twice 😂

[@writerconsidered]

The holy grail 10 mm cracked me up. Someone needs to offer a set of 12 pack 10 mm only. It would sell like crazy.

[@FinnProp]

Every shop should have spares of 8, 10, 13, 17 and 19.

[@Idtelos]

Gearwrench sales a set of 10mm in 1/4 and 3/8. Search Gearwrench 80319.

[@derekp6636]

harbor freight has an "essentials" all 10mm set :D I already bought one

[@paulleisureman6189]

I got a 10 pack from tractor supply. Swivels, long, short, 1/4 and 3/8 mixed. I bought 5 sets

[@rhouser1280]

00:37 That poor guy got hit once & said, I’ll be alright, just don’t let it happen again.

[@Benoit-Pierre]

6:45 only technicians can understand 🤣🤣🤣 ( the joke is not about the holy light, but the 10 socket )

[@butWhyDad]

What is the joke?

[@Benoit-Pierre]

​@@butWhyDadthere is a world wide story about the 10 socket and wrench to always escape from your toolkit within days after you buy it. Here, at last, after hundreds of thousands of 10 sockets have faded to other worlds, one have come back from heaven. This story only applies to the 10 socket. =» it's not about some random holy socket . It's about the 10 coming back !!! *** Reality is that 10 is the second most used socket after 17, but, the 10 is much smaller and easy to loose, and usually required when discounting things that are PITA, so you focus so hard on your PITA that you just forget where you put things. It's also the socket you discover the fastest you lost, because you need it very often. For example, if you loose the 14 or 18, you may catch it only months later. But 10, only minutes or hours. Some people loose more than 1 per week, every single week, since years.

[@yerocgolden2864]

@@butWhyDad 10 socket are used way more than most others sockets. Always have a 10

[@adz762]

Can you imagine having to make that phone call from the shop that you dropped their car off the lift? 😂

[@VoVilliaCorp]

or it burst into flames while on the lift?

[@thechosenone5924]

Rule 1 lift it like an inch off the ground and shake the vehicle check lift points.

[@cobaltace62]

Ahh, Mr. Smith, something happened to your Corvette and we will not be able to fix it. Please come and pick it up

[@SwapPartLLC]

I'll be quite happy to get the payout from their insurance company.😂

[@FredMo]

​@@thechosenone5924I'm still doing exactly that for 10 years now with every car. But i see many people lifting a lot of cars everyday without checking... i will never understand.

[@meetim6271]

I was good until the 10 mm socket in the beam of sunlight, then I lost it. Still laughing.

[@johnanderson591]

😮😢😅😅😅😅😊

[@JessicaBlaze89]

That poor guy got demolished not once but twice by that falling pole... Poor guy

[@SwapPartLLC]

That would have been an easy lawsuit. He shouldn't be poor anymore.

[@brand-konto6733]

@@SwapPartLLC British newspaper Daily Mail said that this guy is the salesman's father-in-law. 😉

[@SwapPartLLC]

@@brand-konto6733 Damn. That was probably intentional and premeditated.

[@jeffbroders9781]

The guy looking for leaks in an unmounted tire is why the education system in this country needs a lot of reforms.

[@tristanwwsd]

Yes, demographic reforms.

[@bustjanzupan1074]

Aaammmeeennn !!! ! !!!

[@christopherbrock8913]

4:48 (it's my turn, I told you)

[@christopherbrock8913]

Seriously it is not just education - this is the example of this country going down hill fast - there are tire shops in my town that have those type of workers (young, not trained properly, some just don't give a dam anyway) - that clip from the video could have been made at a couple of shops in my town everyday of the week - restaurants, grocery stores, hardware stores and others have these same type of people working in them - back in the 90s, the worst workers at a shop could swap a motor out - nowadays the top guy will replace tire rods and ball joints for a knocking sound that was being made by the plastic/rubber loose in the tire well that was bumping (True Story) - shit is just sad - nobody takes pride in their job anymore - i do lawncare for a living and i try my best to be the best lawncare guy in my town - even if that means doing something extra that I am not going to get paid for - have to do it right and make the yard look good because my work is a representation of me

[@gregwaghorn8496]

Probably apprentice

[@muley180]

As a certified professional technician I can attest to the fact that there is a distinct difference between a so called mechanic and a technician. This video validates what I have always known to be true.

[@jayteedoesvideos]

There sure is a difference. One will fix the car (in most cases), the other (technician) will have sent you to your grave after the diagnostics bill!

[@RS250Squid]

No! Not the lost lonely 10mm bit!!! *sheds a tear* I swear I'm gonna buy like ten of those things.

[@bobuncle8704]

3:48 this, people, is what’s known as a life changing experience. 7:44 he was so broken by this he just gave up and walked away. 10:42 this is how you go in for an exhaust repair, and come away with a new car.

[@keithlowe1982]

Please tell me the hood did *not* close on his "family jewels" ?!? ? !!!

[@bobuncle8704]

@@keithlowe1982 that’s sure what it looked like 😱

[@blogeris1]

@@keithlowe1982 The other part of the set 😓

[@bostonrailfan2427]

maybe he got lucky and it gave him an unscheduled circumcision instead or gave him a tummy tuck 🤣😎

[@IRLSuperb]

3:48 what the heck happened? Did he have a hard one sticking out? Why would it grab it from his pants? 😅

[@aaronthomas6155]

The very last clip with the dog is my favorite.

[@n2ocharged]

6:39 - If you know... you know. 8:26 - Kid's first day on the job... I'm sure he learned a lot that day.

[@HueyBandz]

What was wrong at 8:26?

[@n2ocharged]

@@HueyBandz The kid was looking for an air leak in a tire that's not set on a rim (IE: no air pressure in the tire) so he wouldn't see any bubbles.

[@keltoi30]

He learned that bubbles require air lol.

[@ChristopherPuff]

“Sorry ma’am, your car caught fire in the shop, we are not sure what happened “ 😂😂😂😂

[@Sniper_Cat_71]

Is this why my last tire rotation at Walmart took 3 hours?

[@ronbrock6153]

LOL, the 10 mm spotted is amazing.

[@DinDooIt]

The momo checking for a leak on a rimless tire was amazingly dumb, same as the f150 falling off the lift when you can see it going up uneven and he still raised it, lmao...

[@RodgerMudd]

I am not surprised at all. I have a friend that is a high school teacher. This is what the system is cranking out now days.

[@genefogarty5395]

I feel for the guy that was emptying the oil at the beginning. I was using an air transfer pump to fill the hyd. tank on a big excavator and the pulse caused the hose to come out of the tank. After I came back from a smoke break there was 20 gallons or more of hyd. fluid EVERYWHERE. Owner laughed his ass off and I cleaned it up on paid time. Lesson learned.

[@dddevildogg]

I saw a flatbed dropping off a car with a ruined drainback hose and the operator didn't see it because of the angle of the parking lot it all went downhill.I'd say 20=30 gallons,shut the street down. State EPA down the storm sewer

[@petesmith5092]

Thats good your boss was cool about it. One quart on the floor looks like two gallons, so it musta been a HELLUVA sight!

[@aeromedical6776]

@5:40-that was about $85K worth of Snap-On toolbox that just hit the floor.

[@jamvan2k]

He probably should have closed the drawers before moving it.

[@my3dviews]

@@jamvan2k Not probably, but definitely. Even without moving it, you shouldn't have multiple drawers with heavy tools in them open at once.

[@DariusFlynt_2012]

It’s like when driving a forklift, only move it with a load when the forks are down.

[@cliffords.8341]

All of these incidents were preventable if people just use their brains. What made me laugh the most was the guy checking for leaks from the tire when it wasn't even mounted on a rim with air.

[@Iwillnotbepushed]

Ok two things. That sunbeam on the 10mm killed me😂😂. Also the guy that put the fire out in that van should get a medal. He probably saved that business.

[@tyronlemons5203]

0:33 who needs a gym member ship when your a mechanic

[@jenkathefridge3933]

You can do lifts with the camshaft

[@randybeard6040]

This Whole Video was Hilarious, enjoyed it very much, just shows what can happen in Real Life...

[@mandymoo7406]

the shutter door has got me more times than i care to mention,plus i fell down the pit we have 10 years ago,ribs still hurt occasionally,how i laugh😂😂

[@neilfoster814]

That "10mm socket" skit is 100% real!

[@markm4120]

Ah, the memories...So thankful we didn't have cell phones back then.

[@kareemmeerak9360]

03:47 *this has to be the worst... Either his sausage or nuts got trapped under that bonnet* 😮😮😮

[@eefneleman9564]

As a mechanic, I can confirm this.

[@JesziePVP]

The guy pulling himself up was the most relatable and funniest 🤣

[@Markus_Andrew]

0:38 This is like watching the Three Stooges 😂 Only thing missing was a "Watza madda wid you" and a slap.

[@Idtelos]

The 10mm socket in that light was definitely a religious experience.

[@EM-df6mo]

I worked 52 years, and never had worse any of that stupid crap happen. No wonder people don't trust auto shops in many cases.

[@rickyskidmore7695]

The guy lifting the truck his face was priceless His life flash before his eyes like I’m gonna be fired.

[@MintyFreshTurds]

6:38. My favorite. This touched my soul.

[@HiVizCamo]

Smartest one was the guy and his doggo at the end 😃 🐕

[@isonlynameleft]

2:03 I've actually fallen asleep working on my car before too 😅

[@keltoi30]

I've been pretty close especially when frustrated, so you close your eyes for a second to ponder wtf whatever I was doing wasn't going right.

[@christiewilliams3306]

Thank you for leaving the audio intact without voiceovers explaining what we all can see.

[@blurglide]

That guy at 4:50 was REALLY in a hurry to change his oil!

[@Airwolf_]

And now he's got a whole lot more to worry about on two different vehicles now, and he only owns one.

[@my3dviews]

Another case of a person putting their foot on the gas pedal instead of the brake, then pushing it harder to stop.

[@richard-cf8ce]

I never take my truck to a mechanic thanks the Lord for giving me the talent to fix it

[@MrLordBaer]

The Holy 10mm socket

[@Schreuganoot]

Okay usually I really don't like sound effects added to videos, but the one at 5:14 is so good

[@RobloxHeichel2018]

I like it too.

[@TimTheAnimationDude7053]

8:33 pls do not tell me that guy was supposed to find the leak in the tire 💀

[@mikesokolow7997]

The 10 mm socket, may be the best one.

[@EtonieE25]

Everyone of them a winner 🤣🤣🤣

[@pauljanssen7594]

By the way you always shake the car after you get it a little bit up and then when you get it up a little bit higher you double-check everything. I knew a guy that dropped the car on the side.

[@michaelmartin2276]

OMG ? This is exactly why I do my own work on my vehicles for the last 45 years !

[@XCNT]

8:29 Dude is still searching for the leak I heard

[@ralphduncan8054]

2:05 Don't wake the bear- get the new guy to wake him up. Keep the camera rolling from a safe distance tho.:)

[@Mister_Clean]

3:21 man got suplexed by a tire lmao

[@JeffreyPerrault-hk6xe]

I've been a mechanic for over 30 years I've seen some seriously funny things happen.

[@RSST662]

I tried to tell y'all & I'm gonna keep on telling y'all . Toolboxes are top-heavy . Turn the wheels inward so you have more wheel base vs outward making it even more top-heavy . Because Toolboxes are more prone to falling forward or backwards , it's good to have them pointed towards each other and not in a diagonal .

[@couldntthinkofaname1804]

Also don’t move them with the drawers open.

[@kennyjohnson3132]

With drawers closed and locked.

[@Chef-James]

Best practice close and lock drawers.

[@Mad-Lad-Chad]

Pointing the wheels inwards towards each other just makes the base narrower making tipping easier. The wheels should be pointed to the outside away from each other. This makes the wheel base wider and less likely to tip. But it makes little difference.

[@GT-43]

They fell over because the drawers were open, nothing to do with which way the wheels were pointed.

[@maggaman1603]

I feel pretty good about my backyard mechanic skills after watching this video. 😆

[@rupe53]

It took me 50 years in the business to see most of these happen only one time at various locations. I'd bet these days you can see many in just one year and at the same shop.

[@davidmilne9738]

Your right. After I retired I found out my wife had a life insurance policy on me for work injuries because she never knew who was working next to me.

[@my3dviews]

@@davidmilne9738 So, was she disappointed not being able to cash in? 😂

[@DavidWolfer]

Omg that poor old guy getting the shit beat out of him by that pole 😂

[@randomusernumber1]

In case you ever got annoyed at a safety inspector or you wonder why OSHA exist . This is why !

[@larrybud]

OSHA didn't prevent any of these from happening!

[@scottreneer5982]

Ahhhh the first clip takes me back! 3 stooges, laurel and hardy,Charlie Chaplin and Tom and Jerry. No to forget me and my 2 brothers!

[@SwapPartLLC]

I worked at a small car dealership years ago. One day, I was helping another mechanic with a rear wheel drive transmission. The bellhousing was stuck to the engine. He grabs the tail and jerks it hard. The truck rotated about 45 degrees. The idiot had put the rear lift arms on the sloped part of the frame. Got real lucky it didn’t fall and kill us both. That was the last time I ever went under a vehicle without thoroughly inspecting how it was lifted. I may be paranoid, but I'm also still alive.

[@jenkathefridge3933]

Better to check and not die

[@earlcousins6635]

OMG! This made my day!!! Most laughs I've had in a long time. Was feeling bad, but you picked me UP! THANKS!

[@markbarry7538]

And this is why I do all my own work on my vechicals

[@jp-ty1vd]

then wind up on "Just Rolled In"

[@theballintruth3369]

0:00 reminds me of my shop rn we all started yelling “WHOOOOO” across the shop and our supervisor got pissed 😂

[@williamramsay1]

Find a good tech. If your car is old find a good mechanic. If your car has a carburetor, ensure he is missing a few teeth. Bring him presents and don't rush him or question the bill!

[@dddevildogg]

Damn now everybody knows the secret.

[@SwapPartLLC]

If it has a carburetor, also remember to bring him a 12 pack of his favorite beer.

[@markuzantwahn6351]

The bluegrass buggy dancer prancer was great 😂

[@bobby1970]

This is exactly why I repair my own car. I refuse to let the stooges work on my car.

[@PATW0LF]

These are all independent shops. They are where the worst mechanics and or newest mechanics work.

[@PATW0LF]

…

[@bobby1970]

@@PATW0LF I still don't trust anyone else, except for myself. I want total control of what work gets done and how it gets done on my vehicles.

[@averageguy2525]

This sums it up! Especially the guy spraying water on a tire without a rim checking for a leak.

[@grandam]

1:00 You just can't make this sht up!!! 🤣🤣🤣🤣

[@EM-df6mo]

We don’t have to do we ? Idiots on parade right here.

[@Nitrox4me]

I spent 35 +years as a technician in the automotive service industry. I can relate to most if not all of these. If only I had a phone to record the Antics and the craziness of it all. Different times. Now I have a good memories of this stuff, maybe I should write a book?😮

[@aloysiusbelisarius9992]

1:05 I shouldn't be laughing at that, but Warner Brothers couldn't make a cartoon funnier than that. 1:47 I could tell from the first second that there was something very wrong with the way those arms were situated. Please tell me this was at a do-it-yourself facility, and that the motard lift operator was the owner of that truck. 'Cause if it wasn't and he wasn't, there's got to be a very unamused owner outside there. 2:17 Looks like a Chris Tucker quotable is appropriate here... 4:52 "No way, I'M next! Hurry up and change my oil, you serfs! While you're at it, put in a new radiator." 6:22; 7:52 I reiterate my hopeful guess, that these motard lift operators were the owners of the now-trashed cars, at a do-it-yourself garage...?

[@dannyrutz3792]

That 10 mm sunlight shot awesomeness Dudes who have the cars fall off jackpoints on lifts… ugh

[@EstevanTH]

I have already seen a good half of them, but it made me laugh much as usual. Thank you! ❤

[@Carhax]

I'm so glad!

[@bigmixx]

The guy checking for leaks on the unmounted tire was definitely high 🤣😂🤣

[@Dani-it5sy]

1:14 Mechanics make fun of customers but sometimes it's the other way round. I delivered my car for a simple brake pad replacement. I even warned them the car was usually driven in a salty climate so things would be a bit stuck. 15 minutes after I left I get a fckn phone call. 'We can't get the wheels off' . I asked if they had tried with a breaker-bar with a long arm or maybe even extend it with a metal pipe? No. They had tried for 15 minutes with their air gun in the process ruining 2 bolts 😱 Sorry but my 10 year old son is smarter than that..

[@PaulLorenzini-ny2yw]

Pay your 10 year old to do it then, or better yet, show us how it is done, make a video for us......Cannot wait for it!!!!!!!!!

[@Dani-it5sy]

@@PaulLorenzini-ny2yw I usually do all my work myself. But I was abroad and had no place to do it so I delivered it to a garage that was recommended by several people. Did you actually read my comment? I literally explained how to do it. If you need a video as well to understand that you would do wise to stay away from cars all together 😅 And my son is 11 and I have started to let him help me with such jobs so he start learning. He would be able to remove a wheel even when it's really stuck. I let him do a few nuts when we are on it. Sometimes with a 5 foot long pipe on the wrench and he has to stand on it with his whole weight before they come loose. But he fixes it.

[@PaulLorenzini-ny2yw]

@@Dani-it5sy Show us the video of you doing it.....or your 10 year old.....ranter.

[@Rayfaedundee]

lol. Most of these videos are just beyond belief. Especially the guy checking a tyre for a leak that’s not even fitted to a wheel. lol

[@weekendstuff]

The G wagon made me sad. More money wrecked than I'll ever have at the bank.

[@EBackwards]

3:50 makes a bad day seem so much better than his bad day! 🤣

[@mat199622]

I do wonder how many of these happen yearly in a regular shop.

[@MrErad2008]

So glad I work on my own cars! Lol 😅

[@ChanMan-mm7fe]

Lets look for leaks on the un mounted tire.

[@8ballphilc]

The 10mm socket is pure gold!

[@TheGunRunner.]

Fr. One monkey sound and everything goes to immediate shit. That 10mm one had me hollering, when you need one most..God responds.

[@martinhann1672]

I’ve been in the motor trade for 50 years - some of these clowns still surprise me!!

[@alicea5]

10:16 how did they know the thing was gonna explode?

[@Sandylouts580]

i think you can hear it in the video but the tyre will make popping sounds almost like popcorn or the sidewall of the tyre will bubble

[@wodongalife4572]

Hahaha the 10mm socket! Legendary!

[@Sukaphuc9000]

3:47 Did this poor guy let the hood slam down, and close on his 8=====> Muhh God have Mercy O_O

[@rearspeaker6364]

now he has crooked carrot disease.

[@1stTnetix]

The bench grinder held by hand with no safety glasses is heinous!!! 😂

[@JohnSmith-nr5tx]

The beginning just killed me what a lovely work environment 👍