This Kettlebell Is Much Heavier Than It Looks

We made a kettlebell that is extremely dense and deceptively heavy
🔪🔪 waterjetknives... 🗡️🗡️
Are you or anyone you know going through a divorce? If so, i'm sorry to hear about it, but we'd love to help divide the assets.
Music: David Cutter Music - www.davidcutter...
Don’t steal our videos, if you’d like to use our video for something please contact us via email.

[@captaincoffeecake3595]

This is basically a complete guide on how not to do something correctly

[@islandfireballkill]

If they smash a few eggs randomly it might have a real how to basic feel to it.

[@achecase]

So true, and how difficult would it have been to clean up the surface(s) ?

[@PandaMan02]

well, it is a waterjet channel, did you expect high quality forgery?

[@liamwinter4512]

D+ for effort

[@Mbro420]

You must be new to this channel? 🤔🤣

[@Lilith-Rose]

The reason you are having problems with making moulds for casting is you aren't packing the sand down enough. Personally I prefer petrobond since it gives better detail but your kitty litter (bentonite) and sand mix can make really good moulds if you just pack it properly. It's not enough just to squash it down you need to really punch it (or preferably use a mallet) and then it won't collapse the moment you pull out the object or try to add metal. It's the biggest mistake that newbie metal casters make, and the other big one is not enough heat Also a generous dusting of baby powder is key to stop the sand sticking to the object you are attempting to replicate

[@uiomancannot7931]

What? You're trying to say that proper moulds don't make things that look like they've been freshly dug from an ancient burial mound?

[@Lilith-Rose]

@@uiomancannot7931 more like pulled out of a canal, but yes, that and pouring all at once rather than in dribs and drabs wouldn't hurt matters either. And to get it to flow around the tungsten is very easy.. you just heat all of the tungsten to above the melting point of bismuth and add it to the liquid in the casting before it solidifies.. they make it look far harder than it really is if you know the basics about casting/common sense. Hot thing gets cold if put on cold thing, it's like dropping ice cubes in coffee and expecting it to stay hot

[@KC-bg1th]

@@Lilith-Rose That's why he said ancient, and not a canal for under 100 years. lol

[@Lilith-Rose]

@@KC-bg1th I was saying theirs looked like it had come out of a canal, not a properly moulded one. After all the original is literally moulded plastic and a proper casting needs almost no cleanup

[@evenIgiveUpwastaken]

You'd think in that shop, they'd have access to a hydraulic press to pack it with.

[@at_l]

my favorite part of the waterjet channel is when they said “it’s tungsten’ time” then tungsten’d all over the place

[@trashcompactorYT]

The part where you used the spatula to ladle the molten metal into the mold was cool.

[@caseygriswold8617]

You should see when he uses a ladle to flip his burgers.

[@XBDAX1]

You guys gotta take a class on mold making 😂 looks more like a Kettle Meatball

[@alexcash6358]

Unfortunately ur right

[@C.j-Upside3]

"8lbs" kettlebell actually weighed 7.96lbs lol

[@MGamez977]

it's hard to get exact they make tons of those weights, so they have to make them on a belt and not by hand. it's like stuffing a pillow, not all pillows will have the same amount of stuffing.

[@haleymounts5721]

Idk if it's already been said but baby powder helps a ton when casting something! You can sprinkle it liberally on the item you're wanting to cast then put it into the sand 😁

[@bradley3549]

Fun fact, if you combine Lead and Bismuth in around 50/50, the melting point of that alloy is WAY lower than either Lead (327C) or Bismuth (271C) at around 125C.

[@XYZdude00]

My main reason for my subscription is just to see if you guys ever get better at mold making

[@Ant-fm9ps]

My main reason for my subscription was back when it was the real water jet channel these new guys are ruining this for me

[@bradley3549]

I hope you have a comfortable chair.

[@ThatPhilBurgGuy]

Anyone else barley watch these videos since Dan and Mitchell are gone?

[@John-Doe-Yo]

Nah I’m still here every week

[@CzarYe]

Did you watch the video they last uploaded. Clearly you barely watch them in general. They were literally in the last video.

[@BobMonkeypimp]

I don't watch as much since they barely use the *waterjet* anymore on this *channel.*

[@CzarYe]

@@sjv6598 you really dont watch the videos huh?

[@IIPOLOII]

The fact that Dan and Mitch aren’t the main people on this channel anymore sucks

[@d.i.l.l.i.g.a.f]

Was just thinking the same, they don't have the same screen presence or chemistry at all of Mitch n Dan. Think the channel should be rebranded/renamed or just left to the archives and give up. Certainly turning notifications off now. Be surprised if the channel grows much bigger in subscribers. Come Back D&M

[@WestshopUSA]

We’re over here now if you want more D&M shenanigans.

[@natalieisagirlnow]

no it doesn't

[@youtubeuser5402]

Shut up and Go watch Dan and mitch's new channel then

[@CzarYe]

The fact you and all the other bots keep commenting this garbage sucks. Get a life.

[@Tommy_Collada]

What happened to the first two guys?

[@Nemmy25]

Focusing on their car channel

[@JohnSmith-jk8nv]

They’re “working” on each other.

[@CheeseMiser]

Shut up. Do a LITTLE research. They litterally explain it in a previous video

[@ThatPhilBurgGuy]

@@trusttech9942 Cars & Stuff

[@ZeroScapes]

They were both given promotions in the company, and instead of letting the channel die, they passed it on to co workers/friends

[@triynizzles]

'The water jet channel' now with 99% less water jet!

[@xpndblhero5170]

Man, those pranks at the end were epic.... They had NO IDEA what was about to happen. 🙄😂

[@Yahula1edits]

The impatience and non existant dedication to go an extra day for a project is whats limiting this channel, some stuff just needs more time to be great

[@macksii]

impatience is what makes this channel the waterjet channel

[@BobMonkeypimp]

@@macksii What waterjet? They hardly bother with that anymore unless it's cutting food encased in resin (again and again and again).

[@macksii]

@@BobMonkeypimp i urge you to make your own channel, cutting objects with a waterjet if you feel that should be the only content on this channel.

[@BobMonkeypimp]

@@macksii How about you mind your own business you brown nosed little pleb? Do you have a financial investment in this channel? Are you personal friends with the people on this channel? No? Then get your nose out their behinds. Snivelling little wretch.

[@bradley3549]

@@macksii And the licking.

[@paulann5257]

I miss when they used to cut things with the waterjet.

[@smartinezai]

Are dan and Mitch coming back?

[@Scarlet_Soul]

They're dead Jim

[@EddieBurke]

They were in the last videos

[@MrCarGuy]

They downed too much liquid bismuth

[@dipgrizzly25]

They have a new channel about cars. Go subscribe!

[@CzarYe]

Watch the last video they posted, they never left.

[@danieltrepuen5247]

Wait, the thumbnail says 150lbs, but you made only a 50lbs bell.

[@army2207]

Close enough

[@emerje0]

It's 1 50lb kettle bell, I see no problem here. 🤪

[@CrooningRevival365]

Not wrong.

[@spanglerthings5585]

What happened to the original people

[@humanskull182]

They’re working on a car channel I believe.

[@ronniewilliz153]

these new guys aren't as funny but they will get around to it. I got respect for them for jumping in an just doing it tho. 👊

[@Scarlet_Soul]

They're dead Jim

[@CzarYe]

Watch the last video. Don't be a moron.

[@12345.......]

They are on "cars & stuff"

[@duboishadrien3459]

These 2 guys look ok but please bring back Dan & Mitch. Quality of the work is clearly not the same.

[@dillo12567]

How does 23lbs + 27lbs = 150?

[@benshones6588]

It must be a common core math problem of sorts

[@LeGaulois_5]

"I’m just gonna hold my breathe". That seems like a good idea

[@skycorrigan6511]

When did these guys take over the channel?

[@Nemmy25]

@@trusttech9942 Dan and Mitchel are focusing on their car channel

[@dazzy9712]

It’s called “ Cars and Stuff “

[@Julio-jm8ld]

They bought it, you know like a fortnite account with cool stuff.

[@skycorrigan6511]

@@dazzy9712 I can't find that channel!

[@RubixB0y]

Okay thumbnail has 150 lbs and the final kettlebell is only 50lbs and change. "Pranks" at the end weren't just bad, they weren't even genuine reactions so it comes off like a skit for a school project instead of goofing off.

[@caodesignworks2407]

I do believe that's 1, 50lb kettle bell. ;)

[@ElizabethSwims]

I love the mockery of those fake prank channels

[@tommy13t]

I usually love these videos, but it has to be said…..BRING BACK THE WATER JET!!!!!!!!

[@HotMess320]

I don't understand why there's only 5% female watchers. This is one of my favorite channels! Forget makeup tutorials!! I'd rather watch Mitchell taste resin coated 6 month old food.

[@danielstein4791]

Plus, cute guys playing with heavy tools...'nuff said. 🤣 🌈

[@omarawara]

That is the worst looking mold I've seen in my life

[@schixo9041]

Make it look normal and leave it in a gym 😭

[@HelloTardis]

Those pranks were SICK! 😂

[@austincde]

Today I learned what waffle stomp is 😭

[@wanabifotografer9430]

The everything but waterjet channel

[@buffbuffers2076]

I remember when that one cool dude used to cut shit with water on this channel

[@spicymemeboi2646]

This is like howtobasic for molten metal at this point i love it

[@mattmills3645]

Bismuth eggs?

[@Woogoo336]

Ladleing it in? Don't you mean spatulaing it in?

[@StupidRobotFightingLeague]

THIS IS ART!! SO IS THE ACTING. AND PAINTING. AND METALWORK.

[@TinkersKustomPaintball]

That's a lot of damage

[@AA-zv6yo]

You guys really need to take a casting and mold making class.

[@Sandwich4321]

I made something similar a few weeks ago but in aluminium and it weighted less than half of the original

[@SoylentGamer]

You really ladled that metal with that spatula

[@Retired_Detective51]

If anyone curious, Luke 18:22 on his bracelet is “And the Lord spoke unto them and advised the elders to wait a full 24 hrs for FlexSeal to fully cure.”

[@dogwithahat497]

Should totally send Me some bismuth for a taste test

[@drewsenthused6079]

These guys are takeing care of bismuth!

[@Literal32]

"You're not supposed to do this" I'm lookin' at a dead man. I knew I would see somebody die on this channel eventually.

[@jasonskerrett3826]

This channel has become the home for "I saw someone on the internet do it, how hard could it be?". And no that's not a compliment

[@captainjerk]

8:43 Waffle stomp! noooooooooooo

[@stones8633]

well im done with this channel...

[@onkornix]

Best prank channel of 2016 😁😁

[@itzthatpotato]

World's lightest cowbell? Carbon fiber.

[@TheFlyingMage]

Should've made the exact copy (visually) and then film a series of pranks in some gym.

[@ArsTheurgiaGoetia]

If you want to have a kettlebell heavier than it looks the easy way, just buy one from a store and write 0.00 in front of the existing number

[@SARbud1387]

I thought lead at first, until I saw the coloring and crystalization.

[@litterbox019]

thor, canonically, with the hammer: 8:00

[@NoirOctobre711]

Finest video you guys have produced in a while that wasn't even water jet related. Lol

[@undersky596]

Why does the thumbnail say 150? Great clickbait..

[@mastermuffin3950]

bro the lack of health and safety

[@humaniodxeno889]

what i want to know is why there's a spent artillery shell on the bed at the end.

[@josephwatts2904]

“Don’t forget to waffle stomp”😂😂😂

[@ailurophile4341]

You guys are so fun and wholesome

[@SunroseStudios]

y'all seem to really like putting yourselves in danger lmao

[@rebekanothin493]

Glad to be a part of the 6%

[@3OHT.]

These are the only kinds of pranks I like

[@ThePerfectKiosk]

You're gonna spatula it in there

[@weabowoshi]

Bismuth ladling gotta be one of my favorite genders

[@jonesgang]

50lbs and you guys are having a hard time? Might want to eat some Wheaties....

[@CLCasual]

You should try making the world's heaviest soccer ball

[@MrStimpson38]

This is the best jank I've ever seen.

[@jestertech3790]

You guys have to do the worlds heaviest bowling ball.

[@loadb5985]

You could try preheating fill if you are having flow issues

[@jonhu4127]

I want that kettle bell. Even if it lacks the polish of a professional job, a 50 lb weight would be great for when I don't have time to hit the gym

[@landon5510]

Since you have made the lightest hammer and baseball bat, next should be the lightest kettle bell

[@HunnaBayka]

Holy moly a Will It Blend reference in the wild

[@natalieisagirlnow]

they do one almost every week

[@Joe_Cool48]

Dang, we all just got pranked at the weigh in🤪

[@small3687]

1lb over 50 we'll over that lol.

[@jonbeauvais1437]

Nobodys gonna talk about the 150 pound on the thumbnail

[@brettzolstick989]

Those idiots got pranked so hard

[@dimitar4y]

some people have no fathers and dan&mitch are their surrogate internet daddies. Such a shame they never appreciated the humor of the channel.

[@stevenhall1239]

what has this channel turned into.......

[@corybodette]

The fact that Dan and Mitch aren’t on this channel makes this channel suck. same thing happened with TKOR's channel

[@BobMonkeypimp]

Agree. Nate destroyed that channel & considering they had him as a guest the other week, he'll probably take over this channel and destroy it too.

[@ancientseed2607]

Where’s the original guys we all subbed to? This isn’t a water jet channel anymore.

[@CrazyNerdInventor]

Put a candle in the molten bismuth to get rid of oxidation

[@davidasylum1870]

Density yaaaaay

[@albypesphemore]

2:04 Good soup

[@waltcomotorsports3994]

You know what they say, practice makes… nil

[@miloiv2950]

Legend says he is still holding his breath

[@r.p4336]

The end was all worth it

[@Dogboy394]

why dont you melt the tungsten

[@exvapid4667]

Why tho?

[@dimitar4y]

the "pranked" section is slaying me. Keep it up! Whatever it is you're doing, you're doing it well!

[@craycraycat4917]

Clickbait thumbnail

[@velazquezarmouries]

That's a big error man you used a spatula to ladle the bismuth into the mold

[@MonsieurFlange]

Calls it a spatula again.... Then alls it a ladle straight after.... The thanks the spatula for its help...

[@HunnaBayka]

You guys are why I never had any half trays while carrying mail for USPS

[@truckstreestoys]

They sell specific sand for this so things don't come out looking like metal poop

[@aland7236]

Where waterjet?

[@facenameple4604]

Make a tungsten brick to fill up a USPS SMALL flat-rate shipping box. Then mail it. To me.

[@bossgrunn775]

If you leave the head of the ladle in the molten metal to heat up the metal won't stick to it so well

[@borey123xx9]

please take that kettle to a gym or in public. I wanna see people try to lift it

[@bigslappy7850]

Hilarious as always! Keep it up!! C:

[@khailsan]

Is this channel hacked? Where's Dan and Mitch?

[@RissaNaChelle]

Guys, please put a raw steak in some resin and see if it cooks